If you’re looking for a space-saving handgun storage system, consider the Easy Use Gun Hangers from USA GunClub. These vinyl-coated, wire hangers organize handguns below the shelves in your gunsafe, freeing up storage space above the shelves. To use the handgun hangers, simply slide each hanger on the shelf and then slip your pistol’s barrel over the lower rod. Handgun Hangers are intended for guns with an overall length of 10 inches or shorter. They will fit shelves that are at least 11 inches deep and 5/8-1 inch in thickness. Handgun Hangers will hold handguns .22 caliber and up, though the fit is a bit snug on .22s. A four-pack of Handgun Hangers costs $8.99. This product is now Amazon’s #1 Best Seller among handgun storage accessories.
WARNING — Always Make Sure Handgun is UNLOADED when using Handgun Hangers!!
USA GunClub also offers an Over-Under Hanger that holds two handguns — one above the shelf, and one below. A two-pack of Over-Under Hangers (capable of holding four handguns) costs $7.99. This may be a good solution for you. This Editor personally prefers the standard Handgun Hanger, so I can use the upper surface of the shelf to hold odd-shaped items such as cameras, binoculars, and miscellaneous valuables.
Bigger is Better?
Yes, size matters — at least when it comes to gun safes. Is your current safe bursting at the seams with your ever-growing firearms collection? Perhaps you need a little more vertical clearance for your Lahti L-39 or favorite Punt Gun? Well Superior Safe Co. has a solution for you — a humongous safe that stands 10-feet tall and weighs more than a pick-up truck. For reference, the young man in the picture, Greg from Pyramyd Air, is an honest 6’3″ tall.
Sized Right — For a 7-Footer
Now if you’re not an NBA center, the lock placement on this safe is not very practical. The lock’s keypad is a good foot above Greg’s head, making access somewhat difficult for the “vertically challenged” customer. We’re not sure what Superior Safe hand in mind here — unless this mega-safe was really created for the likes of Shaquille O’Neal or Joel Embiid.
Still, Americans love big stuff — big cars, big houses, and, of course, big guns. At least if you purchase one of these monsters, you’ll have the peace of mind that a smash-and-grab thief can’t roll it away on a hand dolly. Superior Safe, which displayed this yellow giant at the NRA Annual Meeting & Exhibits a while back, explains that this is a “custom model” not on the normal price list — face it, if you need to ask about the price, you can’t afford it. Joking aside, if you really need this kind of capacity for a firearms collection (with a punt gun or Lahti), you’d be wise to consider a custom walk-in vault, built into a room in your house. (Safe photo courtesy Pyramyd Air.)
What is a Punt Gun? A punt gun is an extremely large shotgun used in the 19th and early 20th centuries for shooting large numbers of waterfowl for commercial harvesting operations and private sport. Punt guns could have bore diameters exceeding 2 inches (51 mm) and fire over a pound of shot at a time. A single shot could kill over 50 waterfowl resting on the water’s surface. Punt guns were too big to hold so they were often mounted directly on the punts (boats) used for hunting, hence their name. Generally the gun was fixed to the punt, requiring the hunter to manuever the entire boat to aim the gun. Firing the gun often propelled the punt backwards from recoil. Sometimes fleets of punt gun-boats were used together. In the United States, this practice depleted stocks of wild waterfowl and by the 1860s most states had banned the practice. In the United Kingdom, a 1995 survey showed fewer than 50 active punt guns still in use. UK law limits punt guns to a bore diameter of 1.75 inches (1 1/8 pounder). Learn more at Wikipedia.com.
Lahti L-39 photo, courtesy Gordon Greene, originally appeared in The Gun Zone.
With the Fifty Caliber Shooting Association (FCSA) 2018 World Championships being in the news lately, we thought our readers might enjoy a report on some amazing 50-Caliber technology. For the past few years, the U.S. Defense Advanced Research Projects Agency (DARPA) has been developing a guided 50-Caliber projectile. No this is not an April Fools joke — this is for real boys and girls — DARPA has produced a guided bullet. Read on to learn how DARPA did it…
Imagine if you could “steer” your bullet to the target, after the projectile leaves the muzzle. That has been a dream of marksmen ever since the first rifle was invented. Well that dream is now one step closer to reality, thanks to DARPA.
DARPA has developed a manueverable .50-caliber rifle bullet. DARPA’s Extreme Accuracy Tasked Ordnance (EXACTO) program recently conducted the first successful live-fire tests demonstrating in-flight guidance of .50-caliber bullets. Inside EXACTO bullets are optical guidance systems, aero-actuation controls, and multiple sensors. The top-secret technology permits the trajectory of the bullet to be altered in flight, allowing the bullet to move left or right, or even fly in an arc around an obstacle.
A few years back, DARPA released a video showing EXACTO 50-caliber bullets in flight. Watch carefully and you will see the tracked trajectory appear to bend off in one direction in the last segment of the bullet’s flight. Here is the DARPA Video:
According to DARPA: “This video shows EXACTO rounds maneuvering in flight to hit targets that are offset from where the sniper rifle is initially aimed. EXACTO’s specially-designed ammunition and real-time optical guidance system help track and direct projectiles to their targets by compensating for weather, wind, target movement, and other factors that could impede successful aim.”
DARPA states: “For military snipers, acquiring moving targets in unfavorable conditions, such as high winds and dusty terrain commonly found in Afghanistan, is extremely challenging with current technology. It is critical that snipers be able to engage targets faster, and with better accuracy, since any shot that doesn’t hit a target also risks the safety of troops by indicating their presence and potentially exposing their location.”
The Extreme Accuracy Tasked Ordnance (EXACTO) system seeks to improve sniper effectiveness and enhance troop safety by allowing greater shooter standoff range and reduction in target engagement timelines. The objective of the EXACTO program is to revolutionize rifle accuracy and range by developing the first ever guided small-caliber bullet. The EXACTO 50-caliber round and optical sighting technology expects to greatly extend the day and nighttime range over current state-of-the-art sniper systems. The system combines a maneuverable bullet and a real-time guidance system to track and deliver the projectile to the target, allowing the bullet to change path during flight to compensate for any unexpected factors that may drive it off course.
Technology development in Phase II included the design, integration and demonstration of aero-actuation controls, power sources, optical guidance systems, and sensors. The program’s next phase includes a system-level live-fire test and technology refinement[.]
Love your LabRadar chronograph? Or wish you owned one? Well now the LabRadar is even better. The makers of the advanced, Doppler-radar LabRadar system have introduced a versatile new LabRadar Mobile App that works with iOS (Apple) and Android systems.
The Mobile App lets you control the LabRadar remotely with your smartphone or laptop. This makes it easier when you position the LabRadar beyond arms reach (such as when using a suppressor). The App also makes it much easier and faster to change settings, display shot data, and download test results.
LabRadar Android Mobile App:
Initial feedback on the LabRadar Mobile App has been very positive, though it took some guys a couple tries to get everything working right. Android users — be sure to turn on your “Location Services”. You’ll find a full discussion of the LabRadar App, with set-up tips, on our Shooters’ Forum. Read HERE.
LabRadar iOS (Apple) App, iPad Version:
Here’s a recent review from a LabRadar owner using an Android phone: “[This App] makes the LabRadar exponentially more useful without additional cost. Firmware update to 1.20 was uneventful and quick. No issues running this on a Samsung Galaxy S9+. Shot series can be reviewed on the phone while disconnected from the radar. While connected you can change the radar settings from within the App. Great features and flawless execution.”
LabRadar Mobile App Functionality
With the new Mobile App, you can control your Labradar from your smartphone or tablet with its Bluetooth connection. Manage, store or delete the information in your series as you wish. View your data and summaries displayed in list or table formats. Even view a graph of speed vs. distance.
– Control your LabRadar from your smartphone or tablet
— Display Single Shot Stats: Velocity, Energy, Power Factor
— Display Shot Series Stats: Average, ES, SD, Hi/Lo Shot
— View Velocity by Distance as Graph and List
— Arm, disarm, and change your settings
How to Install and Use LabRadar Mobile App
First get the LabRadar App for your mobile device. Download the Android App from Google Play. Get the iOS (Apple) Version from the Apple App Store. You may also need to update your LabRadar Firmware.
Firmware Update to Enable Bluetooth
LabRadar owners may need to upgrade their chrono’s Firmware to allow the unit to communicate with the Mobile App. The latest firmware will enable the Bluetooth connectivity on your LabRadar device. Download the new Firmware v1.2.2 by following the link below.
1. Go to http://www.mylabradar.com/download/
2. Select: Labradar Firmware v1.2.2 (English) Mobile App Ready.
3. Copy the FWA and FWB files to a SD card (or use the USB cable method).
4. Insert the SD card in your Labradar and turn it on.
5. On your Android Device, make sure your location services is enabled.
6. IMPORTANT — Do NOT PAIR your Bluetooth device to the Labradar! When using the mobile App simply connect to your Labradar from within the App.
New Technology — Electronic Reticle Level. Activate level by pushing illumination button for 15 seconds. The level warning deactivates automatically when you rotate the scope over 30 degrees.
The latest Leupold VX-6HD scopes have a feature we’d like to see incorporated in other optics: a tilt-correction warning system. When the rifle is canted more than 1 degree off level, the VX-6HD’s new electronic reticle level flashes, telling the shooter to square up his rifle. This kind of innovation helps both hunters and target shooters. Even a small bit of cant variance from shot to shot will change the point of impact at long range (Canting Demo HERE). Proprietary MST (Motion Sensor Technology) automatically deactivates illumination after 5 minutes of inactivity, yet reactivates instantly as soon as any movement is detected.
The electronic reticle level and other advanced VX-6HD features were praised by Petersen’s Hunting magazine, which awarded the VX-6HD an Editor’s Choice award. Leupold put a lot of advanced optics technology in this scope. Leupold says: “We gave it new high-definition lenses for sharpened clarity, Twilight Max Light Management System, an in-scope cant indicator, a throw lever for fast magnification changes, and a more robust erector system.”
Leupold offers six VX-6HD series riflescopes: 4-24x52mm, 3-18x50mm, 3-18x44mm, 2-12x42mm, 1-6x24mm, and 1-6x24mm multigun. All Leupold VX-6HD riflescopes are CDS-capable and include one free Custom Ballistic Dial with purchase.
The VX-6HD series of scopes also feature a very clever, button-controlled return-to-zero system for both windage and elevation. A visible button snaps out at the zero point, locking the turret. Press the ZeroLock button to release and dial your needed elevation or windage. Simply spin the turret back and the lock snaps into place automatically at the designated zero point. Simple, easy, effective.
Here’s something that may benefit pistol shooters, especially those who shoot steel and often shoot at indoor ranges. Federal Syntech bullets are now available as reloading components in 9mm, .40 Cal (10mm), and .45 Caliber. These bullets feature a total synthetic jacket (TSJ) polymer coating. The potential for reduced wear and fouling is real — when tested against conventional FMJ ammunition, Federal claims Syntech produced an average of 12% less barrel friction and 14% less heat. By eliminating the conventional bullet jacket, the Syntech design greatly lessens bullet “splashback” when shooting steel. Note, however, Syntech bullets still have a conventional lead core. This means they may not be allowed in ranges with lead restrictions.
Syntech Bullet Features & Benefits
• Polymer-encapsulated Syntech bullet prevents metal-on-metal contact in the bore.
• Eliminates copper and lead fouling.
• Decreases heat and friction, extending barrel life.
• Significantly reduces the required frequency of cleaning.
• Absence of a copper jacket minimizes splash-back on steel targets.
For years this Editor has loaded his .45 ACP and .44 Mag handguns with polymer/moly matrix-coated bullets from Precision Bullets in Texas. Those poly/moly-encased lead bullets shot VERY accurately and I found that my barrels fouled much less than with conventional lead bullets. Likewise, there was much less cylinder fouling on my revolvers. If the American Syntech bullets work as well as those Precision bullets, I think the Syntech line will be a winner. Syntech bullets should benefit any high-volume pistol shooter, particularly competitors who shoot steel.
PMA Tool offers lightweight yet sturdy cleaning cradles that are handy, affordable, and easy to transport. PMA’s single-gun cradle, priced at $75.95, is ideal for benchrest rigs. It measures about 17″ in length and weighs about one pound. PMA now also offers a two-gun cradle for $119.95. Both single and double cradles secure your rifle(s) in a muzzle-down position that allows easy cleaning and prevents solvents from running back into the action. The front “saddle” and all contact surfaces are covered by thick silicone rubber padding which grips the rifle securely yet protects the stock and components from scratches.
These cradles are currently available either with a 3″-wide front saddle for Benchrest and F-Open style stocks, or a 2.5″-wide front saddle for rifles with narrower narrower, flat fore-ends such as those found on Hunter Class and modern varmint stocks.
Double Rifle Cradle is a Smart, Versatile Design
PMA’s double rifle cleaning cradle was was designed from the ground up to work perfectly for two rifles side-by-side. Using the same tie bar and protective saddles found on the single cradel, PMA widened the base and created new uprights to support the saddles, making the cradle as narrow and light as possible, while retaining all the protective and non-slip features from our single unit. This unit is available in double 3″ front saddles, double 2.5″ front saddles or combination 3″ / 2.5″ front saddle configurations to accommodate multiple classes of rifles for centerfire and rimfire benchrest competition.
Product Tip by EdLongrange. We welcome reader submissions.
In the PRS game, the 6.5 Creedmoor has ruled the roost. However more and more serious competitors are moving to the 6mm Creedmoor cartridge because it offers lower recoil and a flatter trajectory (with some bullets). If you are a fan of the 6mm Creedmoor — take heart. Lapua has started production of 6mm Creedmoor cartridge brass, which should hit American shores later in the year. Yes this 6mm Creedmoor brass has small primer pocket and small flash hole — allowing it to stand up to repeated loading cycles with stout pressures.
Here is the official announcement…
Lapua 6mm Creedmoor Cartridge Brass
Lapua is pleased to announce the new 6mm Creedmoor case, a necked down version of the extremely popular 6.5mm Creedmoor designed to produce higher velocities, flatter trajectories, and reduced recoil.
Customer demand for a 6mm version followed almost immediately after the release of the original Creedmoor case. Aside from the neck dimensions, our new 6mm Creedmoor cases shares the same features and characteristics that make Lapua the standard for 6.5 Creedmoor brass. It is a beautifully-drawn case, properly annealed at the neck and shoulder, with head metallurgy specifically chosen for durability, and the same small rifle primer, small flash-hole design that delivers the ultimate accuracy edge. The smaller 6mm bore diameter offers an excellent selection of proven low-drag match bullets that offer outstanding long range performance with even less recoil.
While the original 6.5 Creedmoor was designed with NRA High Power competition in mind, other disciplines, including the Precision Rifle Series (PRS), were quick to see the positive attributes of this cartridge. We know Lapua’s latest offering will find a niche with discerning shooters in demanding competitive disciplines.
We expect Lapua’s new 6mm Creedmoor cartridge brass to be favored by High Power shooters and serious varminters as well as tactical competitors. The Lapua 6mm Creedmoor cases will be available in the USA later in 2018.
The new Lapua 6mm Creedmoor Brass will definitely be a hit with PRS Competitors…
Photo from Ramia Whitecotton’s GAP GRIND 2016 photo album.
New product tip from Boyd Allen. We welcome reader submissions.
You have probably never seen a handgun like this before. This ain’t no compact pistol that’s for sure. The new Model 48 Nosler Custom Handgun (NCH), designed for handgun hunting/varminting and long-range silhouette duties, features a rifle-size bolt action, combined with a 15″ barrel. The billet aluminum stock takes AR-type pistol grips. The fore-end is long enough to work well on a front rest. We like the rakish lines of Nosler’s new Model 48 but the $2495.00 MSRP is not inexpensive.
Still, the compact size (21″ OAL) and relatively light weight (5.4 lbs.) make this an interesting option for hunters and varminters who venture far afield.
Early production versions have been well-reviewed: “Over the last 40 years, I have shot every conceivable configuration of single-shot handguns including high-end custom rigs. The new Nosler handgun will keep up with the very best of them. In my experience, I have found this handgun to be extremely accurate, well-designed, and user-friendly. The Nosler handgun will be most welcome with handgun hunters, target and steel shooters, or anyone looking to add an exciting dimension to their shooting experience.” — Mark Hampton
The new Nosler Model 48 handgun is offered in a variety of versatile chamberings: 22 Nosler, 24 Nosler, 6mm Creedmoor, 6.5 Creedmoor, 7mm-08 Rem, and .308 Winchester. CLICK HERE for a discussion of M48 NCH options in our Shooters’ Forum.
Nosler Custom Handgun Model 48 Features
1. Shilen Barrel — The M48 NCH features a free-floated Shilen 416R stainless heavy-contour barrel threaded at the muzzle, and supplied with a thread protector. Standard barrel length is 15″ with other lengths between 12″-18″ available on request. Barrel fluting is also available for an additional charge.
2. Aluminum Stock — The CNC-milled billet 6061-T6 aluminum stock will take any grip that fits an AR15. We suggest adding a grip with a broad flat base to provide more stability.
3. Size and Weight — The M48 NCH is 21″ long with 15″ barrel (no brake) and weighs 5.4 pounds — quite a bit lighter than typical hunting rifles.
4. Cerakote Finish — The M48 NCH barreled action and stock both feature Cerakote® finishes. The barreled action and stock are coated separately, allowing for a wide variety of color combinations.
5. Muzzle Brake Option — A Harrell’s Precision Tactical 4-Port Brake (shown below) is available as an extra-cost addition.
For 2018, Lyman has introduced a new 8-station turret press, the All American 8. There are two other new Brass Smith presses from Lyman — a compact C-Frame Ideal Press and a sturdy O-Frame Victory single-stage press that competes with the RCBS Rock Chucker. With its eight-station capacity, strong cast iron construction, we think the All American 8 will become popular. With a $195 street price, the 8-station Lyman is $100 cheaper than the 7-station Redding T-7. No question, that’s a significant price advantage, and we believe Lyman will take sales from Redding.
Our friend Gavin Gear of UltimateReloader.com got his hands on one of the new All American 8 presses, and he’s created an informative video showing press set-up and loading function. Gavin was excited to work with this beefy new turret press: “Why has this Lyman press been anticipated so highly since its announcement? A few reasons are: the 8-station capacity, cast iron construction, on-press priming system, ambidextrous design, and turret rear support for repeatable sizing and bullet seating. Plus, it’s made right here in the USA!” To learn more about the All American 8 turret press, watch Gavin’s video:
More Stations = More Reloading Options
Gavin said the press works well — he liked having 8 stations, because this offers more flexibility. With eight stations, you can have four two-die sets, or three two-die sets plus a dedicated decapping die and a powder measure. Gavin notes: “I’ve owned many reloading presses, including 3-station, 4-station, 5-station, and 7-station variants, but I’ve never owned an 8-station press until the Brass Smith All-American 8 came to the shop. I’ll have to say… you can’t get too many stations, especially on a manually-indexed turret. I love the idea that you can leave dies on the press, and load multiple calibers/chamberings using the same turret setup.”
Primer Function Works Well
Gaving also seated small and large primers using the on-press priming system. The Lyman All-American 8 turret press comes complete with all of the parts needed to seat both large primers and small primers. Gavin observed: “The All-American 8 loads quite well! Once I cleaned out the primer tube (always do that on a new press) the priming system worked perfectly, and I had no issues getting up to ‘full turret speed’ after getting into the groove.”
Why Use a Turret Press
This Editor has used a six-station RCBS Turret press for many years. I keep a dedicated decapping die on that press, as well as sizing and seating dies for pistol cartridges. My high-volume 9mm and .38 SPL reloading is done on a progressive press, but the RCBS turret allows me to have dies for two larger pistol chamberings — .44 Magnum and .45 ACP — at the ready. While we recommend single-stage presses for precision rifle reloading, the turret press offers great flexibility for handgun hand-loaders who shoot numerous cartridge types. And if having six die stations is good — having eight is even better. Advantage Lyman.
USA GunClub also offers an Over-Under Hanger that holds two handguns — one above the shelf, and one below. A two-pack of Over-Under Hangers (capable of holding four handguns) costs $7.99. This may be a good solution for you. This Editor personally prefers the standard Handgun Hanger, so I can use the upper surface of the shelf to hold odd-shaped items such as cameras, binoculars, and miscellaneous valuables.
A punt gun is an extremely large shotgun used in the 19th and early 20th centuries for shooting large numbers of waterfowl for commercial harvesting operations and private sport. Punt guns could have bore diameters exceeding 2 inches (51 mm) and fire over a pound of shot at a time. A single shot could kill over 50 waterfowl resting on the water’s surface. Punt guns were too big to hold so they were often mounted directly on the punts (boats) used for hunting, hence their name. Generally the gun was fixed to the punt, requiring the hunter to manuever the entire boat to aim the gun. Firing the gun often propelled the punt backwards from recoil. Sometimes fleets of punt gun-boats were used together. In the United States, this practice depleted stocks of wild waterfowl and by the 1860s most states had banned the practice. In the United Kingdom, a 1995 survey showed fewer than 50 active punt guns still in use. UK law limits punt guns to a bore diameter of 1.75 inches (1 1/8 pounder). Learn more at 
Imagine if you could “steer” your bullet to the target, after the projectile leaves the muzzle. That has been a dream of marksmen ever since the first rifle was invented. Well that dream is now one step closer to reality, thanks to DARPA.
The electronic reticle level and other advanced VX-6HD features were praised by Petersen’s Hunting magazine, which awarded the VX-6HD an Editor’s Choice award. Leupold put a lot of advanced optics technology in this scope. Leupold says: “We gave it new high-definition lenses for sharpened clarity, Twilight Max Light Management System, an in-scope cant indicator, a throw lever for fast magnification changes, and a more robust erector system.”
Customer demand for a 6mm version followed almost immediately after the release of the original Creedmoor case. Aside from the neck dimensions, our new 6mm Creedmoor cases shares the same features and characteristics that make Lapua the standard for 6.5 Creedmoor brass. It is a beautifully-drawn case, properly annealed at the neck and shoulder, with head metallurgy specifically chosen for durability, and the same small rifle primer, small flash-hole design that delivers the ultimate accuracy edge. The smaller 6mm bore diameter offers an excellent selection of proven low-drag match bullets that offer outstanding long range performance with even less recoil.
