Barrel nut system allows “Pre-Fit” barrel installation on a Remington action. CLICK photo to zoom.
REMAGE Project Report by Bill, Rifleshooter.com Editor
Installing a new barrel on your Remington 700 (especially without a lathe) may seem like a daunting task, but thanks to companies like McGowen Precision Barrels and Criterion, there are easier alternatives. By adopting a Savage-style barrel nut on a 1 1/16″ thread for a Remington 700 receiver, pre-chambered (aka “pre-fit”) barrels can be easily swapped with just a few hand tools. This system is sometimes called a REMAGE conversion (for “REMington savAGE”). With simple tools a “Pre-fit” 6mmBR-chambered barrel was installed on the author’s Remington action — no machining or lathe-work required.
The existing barrel is simply removed from the action (normally the hardest part) and the new barrel is screwed on with the Go Gauge in place. After headspace is verified with the Go Gauge, the barrel nut is tightened against the action and you are off to the range. It takes all of the machine work out of the barreling process.
Note: Because barrel nut has a slightly larger diameter, some stocks may require minor inletting. Also, if you are shooting fired brass from another rifle with the same chambering, you should FL-size the brass before loading it for your new pre-fit barrel. And always check the set-up with a dummy round loaded to normal cartridge length BEFORE you head to the range. With Pre-Fits, the freebore should be adequate for your cartridge, but always check and adjust your seating depth as needed.
Bill has been a serious shooter for over 20 years. A former Marine Corps Sergeant, he’s competed and placed in High Power Rifle, ISPC, USPSA, IDPA, 3-Gun, F-Class, and precision rifle disciplines. In addition to being an NRA-certified firearms instructor and range officer, Bill has hunted big game in North America, South America, and Africa. Bill writes extensively about gunsmithing, precision rifles, and the shooting sports on his Rifleshooter.com website.
If you are looking for a versatile, well-crafted semi-auto .22 LR pistol, here’s an option you should definitely consider — the SIG Sauer P322. Introduced in 2022, this .22 LR rimfire pistol that should be popular with SIG’s centerfire handgun owners and anyone who wants a quality, polymer-framed .22 LR pistol. Th P322 offers excellent ergonomics and 20+1 capacity, making it good for cross-training and fun rimfire shooting.
This VIDEO explains the features of the new P322 (Loud Volume — turn down at work):
The new P322 was designed and built by SIG Sauer in the USA. It has many premium features, including an optics-ready removable rear sight plate allowing installation of a red dot optic without adapter plates. The P322 offers ambidextrous controls, interchangeable flat and curved triggers, and fiber optic front and rear sights. The P322 even comes with a threaded barrel adapter making it suppressor-ready right out of the box. And with a 20-rd magazine for 20+1 total capacity, the new P322 is the highest-capacity .22 LR pistol in its class. (And a mag extension is offered for 25-rd capacity).
Though it may look like a striker-fired pistol, the SIG P322 is a hammer-fired, single-action-only design (the hammer is enclosed by the rear of the slide). The P322 is blow-back operated with a fixed (non-tilting) 4″ barrel. This helps contribute to excellent accuracy and reliability.
Hands-On P322 Testing by 22Plinkster
SIG Sauer P322 Pistol Features:
Ambidextrous Controls With Reversible Magazine Catch
Optics-Ready Removable Rear Sight Plate
Fiber Optic Front and Rear Sights
Hammer-fired, Single-Action-Only, Fixed 4″ Barrel
Suppressor-Ready With Included Threaded Barrel Adapter
Interchangeable Trigger Shoes (flat and curved included)
20 Round Magazine Capacity (with +5 optional mag extension) SEE PRODUCT PAGE
Will you compete at this year’s NRA National Matches at Camp Atterbury, Indiana? Then there’s an excellent digital magazine you should read. Shooting Sports USA has a guide to the 2022 NRA National Matches with great photos, match results, and interviews with top shooters. Featuring complete coverage of last year’s competitions at Camp Atterbury, including the High Power Rifle, Smallbore Rifle, and Precision Pistol National Championships, the recap can be viewed for free online. CLICK HERE to READ.
2022 NRA National Matches — Full Report
At the NRA National Matches at Camp Atterbury, high-level competitive shooters from around the nation can test their skills and celebrate their achievements with medals and trophies. The 2022 NRA National Matches special edition magazine, published digitally by Shooting Sports USA, celebrates the 2022 NRA National Rifle and Pistol Championships at Camp Atterbury, Indiana.
SSUSA’s 2022 digital recap begins with the opening day festivities, including the First Shot Ceremony with Indiana First Lady Janet Holcomb, and goes on to cover the three different phases of the NRA National Matches. Plus, there is special coverage of the 2022 Pershing International Trophy Match, where the U.S. smallbore rifle team recorded a historic victory over Great Britain.
The home of the NRA National Matches since 2021, Camp Atterbury is an active National Guard training facility located south of Indianapolis, near Edinburgh, Indiana. For the 2022 National Matches, Camp Atterbury employed 30 Silver Mountain electronic targets for the Rifle Range Six. The moder e-targets allow faster, more efficient matches, with no pit duties for competitors.
The USAMU’s SFC Brandon Green shot superbly last year at Camp Atterbury. Green won numerous matches, capturing the Long Range Rifle Championship and many other honors. Here’s Brandon with his trophies from 2022.
Here are Cadets Hayle and Jesse Mayer, from the Texas A&M Reserve Officers’ Training Corps (ROTC), at the 2023 U.S. Army Small Arms Championships at Fort Benning, Georgia in March 2023. The annual, live fire training event is open to Army ROTC cadets and all soldiers in the active duty, Army Reserve, and National Guard, and is therefore commonly called the ‘All Army’. CLICK HERE to Read Full Story on USAMU website. (Photo by Lt. Col. Michelle Lunato.)
Cadet Sisters Compete at the U.S. Army Small Arms Championships Story by Lt. Col. Michelle Lunato U.S. Army Marksmanship Unit
This year’s U.S. Army Small Arms Championships was more than just a unique training event for two Texas A&M ROTC cadets, it was a family affair. Cadets Hayle Mayer and Jesse Mayer, who are sisters, participated in the week-long, comprehensive, live-fire marksmanship training event that brings together more than 250 soldiers from across the U.S. Army to the Maneuver Center of Excellence.
The annual event, which is commonly called the “All Army”, is hosted by the U.S. Army Marksmanship Unit (USAMU) and begins with All Army competitors receiving a variety of classes from the USAMU champions and experienced trainers.
After that, the soldier competitors, who were a mix of service members from active duty, Reserve, National Guard, and ROTC, competed in 11 different courses of fire during the week … both rifle and pistol matches, with and without combat gear, as well a 4-stage multi-gun match.
As a senior, All Army 2023 was Jesse’s second year to compete and the cadet said each year has been extremely helpful in developing her soldier skills. “I think both times that I have come here, I have really grown as a marksman … just learning the basics, what I am capable of, watching improvement each year, and just learning how complex marksmanship is. It’s been really incredible each time.”
For her sophomore sister, Hayle, it was her first All Army experience. With limited prior marksmanship experience … Hayle said she was trying to absorb all that she could. “I am just learning basically everything you can about shooting.”
Cadet Hayle Mayer, with Texas A&M ROTC, competes in the Bullseye Pistol Match at the 2023 U.S. Army Small Arms Championships at Fort Benning, Georgia.
Sisters Come from a Multi-Generation Military Family
Though Hayle and Jesse may at be different levels of marksmanship knowledge, the sisters say that military life in general is nothing new to them. In fact, they were born into that life since both their parents were Marines, both grandfathers were soldiers, and a grandmother was an Airman.
That meant that military life was just always there. It’s what we saw and respected, Jesse explained. “Everyone was so disciplined and so patriotic. There was just such a higher purpose to the military that I always saw, and I wanted to be part of that.”
So when it came time for college, joining an Army ROTC program was nothing out of the ordinary because both our parents instilled a strong sense of independence and strength in us, Jesse said.
“Growing up, I watched it — the honor, the sacrifice, and what it meant to give back and serve other people, your Country and your family.”
With all that, Jesse is proud to say that she is contracted to commission in May of 2024 and looks forward to carrying on her family’s tradition of service.
“It means a lot to me to serve my Country, to push myself in any way that I can, and it is part of a family legacy — being in the military — and I just want to complete that and do that for my family.”
Berger Twist-Rate Stability Calculator On the Berger Bullets website you’ll find a handy Twist-Rate Stability Calculator that predicts your gyroscopic stability factor (SG) based on mulitiple variables: velocity, bullet length, bullet weight, barrel twist rate, ambient temperature, and altitude. This cool tool tells you if your chosen bullet will really stabilize in your barrel.
How to Use Berger’s Twist Rate Calculator
Using the Twist Rate Calculator is simple. Just enter the bullet DIAMETER (e.g. .264), bullet WEIGHT (in grains), and bullet overall LENGTH (in inches). On its website, Berger conveniently provides this info for all its bullet types. For other brands, we suggest you weigh three examples of your chosen bullet, and also measure the length on three samples. Then use the average weight and length of the three. To calculate bullet stability, simply enter your bullet data (along with observed Muzzle Velocity, outside Temperature, and Altitude) and click “Calculate SG”. Try different twist rate numbers (and recalculate) until you get an SG value of 1.4 (or higher).
Gyroscopic Stability (SG) and Twist Rate
Berger’s Twist Rate Calculator provides a predicted stability value called “SG” (for “Gyroscopic Stability”). This indicates the Gyroscopic Stability applied to the bullet by spin. This number is derived from the basic equation: SG = (rigidity of the spinning mass)/(overturning aerodynamic torque).
If you have an SG under 1.0, your bullet is predicted not to stabilize. If you have between 1.0 and 1.1 SG, your bullet may or may not stabilize. If you have an SG greater than 1.1, your bullet should stabilize under optimal conditions, but stabilization might not be adequate when temperature, altitude, or other variables are less-than-optimal. That’s why Berger normally recommends at least 1.5 SG to get out of the “Marginal Stability” zone.
In his book Applied Ballistics For Long-Range Shooting (3rd Ed.), Bryan Litz (Berger Ballistician) recommends at least a 1.4 SG rating when selecting a barrel twist for a particular bullet. This gives you a safety margin for shooting under various conditions, such as higher or lower altitudes or temperatures.
Story idea from EdLongrange. We welcome reader submissions.
New Deluxe Extra-Long Shooting Mat with Extended Sides
Creedmoor Sports now offers a new Deluxe Long Range Shooting Mat with extended right- and left-side wings. This 32″ x 106″ mat was designed with feedback from long-range shooters who needed features not found in conventional shooting mats. The mat is available now for $199.95 at Creedmoor Sports.
Deluxe Long Range Shooting Mat Features
Centrally located, non-slip MegaGripII rubber pad to prevent rear bag from slipping
Increased overall length and width (at 106″ OAL, the mat is 8.8 feet long!)
Side flaps with storage compartments for increased space when shooting
Rear extension flat to keep shooter’s entire body on the mat
Front flap to lessen dirt and debris from muzzle blast
This roll-up style Deluxe Long Range Shooting Mat has a 1000 denier Cordura Nylon upper with a water-resistant vinyl bottom. Stake pockets and stakes are included to keep the mat in-place on windy days.
Creedmoor Sports Deluxe Long Range Double Mat
The Deluxe Long Range Double Mat gives shooters more real estate on the firing line. Measuring 56″ x 67″, this double-sized mat features the same construction as conventional Creedmoor Sports mats, but is twice the size. The increased footprint provides increased space for equipment (spotting scope, ammo box, shot log, tablet for electronic target viewing).
This 56″-wide Double Mat can comfortable support two (2) individuals. This has many benefits:
Shooter and spotter can be side-by-side by for improved communication
Mat allows coaching from alongside the shooter
Mat works for Pair Firing in team competitions
Price for the Deluxe Double Mat (as shown) is $249.95. Or you can order a custom, made-to-order version with various color fabrics for $289.95. This item is hand made to order at the Creedmoor Sports Alabama facility and can take 14-20 business days to ship.
Running out of space in your gun safe? Here’s a clever product that will allow you to store more long guns in your current vault. The plastic Rifle Rods from Gun Storage Solutions slip in long-gun barrels and then grip the shelf above using Velcro pads. This allows you to nestle your rifles and shotguns much closer together than with the conventional racks provided with most gunsafes.
The handy Rifle Rods are offered in bright orange or basic black. We prefer the orange rods (shown above with the Velcro “receiver” shelf liner provided with the Rod Kit).
Rifles with narrow furniture (such as lever guns) can be placed very close together, saving lots of space. For benchrest or varmint rifles with wider fore-ends, you won’t benefit as much. Note that, in the photo above, all of the guns are fairly slim — none have wide fore-ends. Still we think these Rifle Rods could open up 12″ or more horizontal clearance in a medium-sized safe — that could easily allow you to store six (6) more guns in two rows, as shown.
Rifle Rod Kits Starting at $22.95
A kit with 5 Rifle Rods and loop fabric shelf liner costs $22.95 on Amazon.com, while the 10-Rod Kit with liner costs around $34.95. That’s a lot cheaper than buying a new safe. A six-pack of additional Rifle Rods costs $19.95 on Amazon. You can also purchases rods and fabric directly from Gun Storage Solutions.
WARNING: Always REMOVE Rod from barrel before taking gun to the range. Never place live ammunition in a gun with storage Rod in the barrel!
Product tip from EdLongrange. We welcome reader submissions.
Powder Valley now offers RCBS Reloading tools and components as part of PV’s large selection of shooting sports and reloading products. So now, when ordering powder, primers, brass, ammo, and bullets, you can also add dies, reloading tools, and even a RBCS reloading press. “Powder Valley already offers an extensive line of reloading components, including Federal, Speer, and Remington bullets, CCI and Federal primers, and Alliant powders. The expansion of our Reloading Tools and Equipment line makes perfect sense” said Bill Clinton, CEO of Powder Valley. “This is one more way we can [benefit] our Customers and serve their reloading needs”.
CLICK HERE to see the wide variety of RCBS products now in stock at Powder Valley. You’ll find powder dispensers, priming tools, reloading presses, case prep tools, plus a wide selection of reloading dies.
A Short History of RCBS (And the Origin of the “RCBS” Name) RCBS was founded in 1943 by Fred T. Huntington in Oroville, California. Huntington was a dedicated shooter but found it difficult to obtain quality varmint bullets. However, after reading about making a die to swage .22 rimfire cartridge cases to form jackets for bullets, he began to craft his own dies in the back room of his father’s Oroville laundry and dry-cleaning business. Because the resulting bullets were used to shoot rock chuck varmints, he named them Rock Chuck Bullet Swage dies, later shortened to RCBS.
RCBS soon outgrew this modest beginning. By 1958, RCBS expanded to a 7,500-sq-ft factory that quickly grew to 50,000 square feet. With time, more expansions have occurred, but RCBS stayed near its roots. Oroville is still the major location for RCBS production. RCBS is now a subsidiary of Vista Outdoor, which also produces Federal and CCI ammunition and primers, Alliant powder, and many other products.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Powder Valley — Shooter’s World Powders, $25/lb and up
⏺ These SW powders can replace hard-to-find Varget, H4350, and more
With the popular ADI-produced Hodgdon powders — H4198, Varget, H4350, H4381sc — being in short supply, many shooters are turning to Shooters World (SW) powders. These are now available from Powder Valley and Midsouth at decent prices. For a Varget substitute, check out Shooters World Precision Rifle powder. Get 8 lbs. for $333.00 or 1 lb. for $44.00. For a slower powder there is SW 4350, with a burn rate similar to H4350 and Reloder 17. This is in stock now at Powder Valley at $344 for 8 lbs. or $45.50 for 1 pound. [NOTE: Bruno’s currently has Hodgdon H4350 1-pounders in stock at $48.50/lb — grab them while you can.] If you need a faster burn rate (similar to H4198), check out SW Tactical Rifle, a spherical powder (with H335 burn rate) that works great in .223 Rem. Available now at Powder Valley SW Tactical Rifle powder is very affordable — $195.99 for 8 lbs. and just $25.00 for one pound. Check with Midsouth for other Shooter’s World powder options in stock.
2. Grafs.com — Frankford Arsenal F-1 Press, $122.99
⏺ Versatile press, good primer exit, plus built-in light
Here’s a handy, single-stage press with some cool features. The new Frankford Arsenal F-1 press has an open front for easy case placement, plus a built-in LED lamp at the top (great for inspecting cases). And after decapping, spent primers go straight down a tube into a handy, clear, twist-off catch cylinder (as on a Forster Co-Ax). We think this would be an excellent secondary press used for decapping or bullet seating. This intro price — just $122.99 at Graf & Sons — is a great deal. NOTE: This press does NOT have priming capability — you must prime cases with a separate tool. Also, the power cord for the LED light is NOT included. For more details see Frankford Arsenal F-1 Press Review.
3. MidwayUSA — Vortex 5-25x50mm and ZEISS 6-24x50mm SALE
⏺ Great deals on two fine optics — choose FFP Vortex or SFP ZEISS
Right now you can save hundreds on two great medium-magnification optics — one from Vortex and one from ZEISS. If you want a Milrad FFP scope, consider the Vortex Viper PST Gen II 5-25x50mm scope for $699.00, $400 (36%) off the regular $1099.99 price. Or, if you prefer a traditional Second Focal Plane (SFP) optic with 1/4-MOA clicks, get the ZEISS Conquest V4 6-24x50mm scope for $849.99, $300 (26%) off the $1149.99 normal price. This ZEISS scope has great low-light performance, and a nice ZMOA-1 reticle — good for targets or hunting. Both these scopes get FREE shipping.
4. Lock&Loaded — 300 Rds Winchester 5.56×45 Ammo, $111.99
⏺ Good American-made 5.56x45mm ammo with major 20% rebate
Here’s a great deal for AR15 owners. Locked&Loaded is selling 300 rounds of 55gr Winchester FMJ ammo for just $139.99. But right now Winchester is offering a 20% Off Ammo Rebate. That lowers your 300-rd price to $111.99! With the rebate, you’re paying just $0.37 (thirty-seven cents) per round — quite a deal.
5. Amazon — Dragon AR500 Steel Targets, $16.99 and Up
⏺ Good prices on strong versatile AR500 steel gongs, 4″, 6″, 8″, 10″, 12″.
Shooting steel is fun — you get instant gratification from hearing the “clang” and seeing the gong swing. Shooting steel is also good practice for PRS/NRL events and ground-hog matches. Right now, you can get some great deals on quality AR500 steel targets. These Dragon Target Gongs start at just $16.99 for a 4″-diameter, 3/8″-thick gong. Larger 6″, 8″, 10″, and 12″ gongs are offered in 3/8″ and 1/2″ thicknesses, and a 3-pack of 8″ gongs is available. A 6″-diameter gong is $25.99 (3/8″ thick) or $32.99 (1/2″ thick). The largest 12″-diameter gong in the heavy 1/2″ thickness is $76.99. NOTE: All these Dragon gongs have a center hole allowing more hanging options.
6. SMKW — Browning .22 LR, 400 Rounds, $24.88
⏺ Good American-made .22 LR ammo at exceptionally low price
Everyone can use some good plinking .22 LR ammo for pistol and rifle range sessions. Check out this Browning BPR .22 LR ammo with 40gr LRN bullets. You get 400 rounds for just $24.99 — the equivalent of just $3.11 per 50-ct box — a great deal! The same 400-rd box ammo sells for $38 at Bass Pro.
7. Locked & Loaded — Savage A22 FV-SR, $287.56
⏺ Good deal on reliable, semi-auto .22 LR rimfire rifle
NRL22 and PRS 22 disciplines are America’s fastest-growing forms of rifle competitions. If you want to try your hand at NRL22 without sinking a fortune, check out the Savage A22 FV-SR now on sale for $287.56, 18% OFF. This semi-auto rifle has shown good accuracy, and it comes complete with a Picatinny rail on top. The .22 LR Savage FV-SR model upgrades the original A22 platform with a button-rifled, 16.5″ medium-contour barrel, and threaded muzzle. The A22 FV-SR features a user-adjustable AccuTrigger and reliable straight blowback semi-auto action for fast follow-up shots.
8. Creedmoor Sports — PRS/NRL Support Bags — Save 10%
⏺ New support bags for PRS/NRL tactical competitions
Creedmoor Sports has introduced a new line-up of support bags for PRS/NRL competitors. Chose the Huggie Forend Support Bag, Freezer Support Bag, or Wingman Positional Bag, starting at $79.95 for the Huggie (or $71.96 with SAVE10 Promo Code). Now through April 3, 2023 (at 11:59 pm Central), use Code SAVE10 to save 10% on Creedmoor Sports products, including these PRS/NRL Tactical Bags, which are made in the USA at Creedmoor Sports’ Alabama headquarters.
9. Graf’s — Blue Book of AR-15s, $10.00 (57% Off)
⏺ Save 57% on the definitive guide to AR Modern Sporting Rifles
If you own an AR-platform “modern sporting rifle”, we recommend you get this detailed print resource. With 384 pages of information, The Blue Book of AR-15s & Variations is the definitive guide to ARs. Packed with diagrams and technical information, this book provides vital maintenance tips along with guides for starting an AR project. Regularly $22.99, this book is now just $10.00 at Grafs.com — a real steal.
10. Amazon — Universal Gun Cleaning Kit, $39.99
⏺ Great value for cleaning kit for pistols, rifles, and shotguns
This Universal Gun Cleaning Kit has just about everything you need to clean any firearm, all packed in a handy transport case. The kit includes jags, brushes, bore mops, slotted tips, and lots more. The fitted jags and slotted tips are made from solid brass and marked by caliber. The cleaning rods and accessory adapters are also made from brass. Included in this easy-to-carry kit are: 6 gun rods, 13 gun jags, 4 slotted tips, 9 gun mops, 14 bore brushes, 3 muzzle guards, 3 utility brushes, 3 accessory adapters, 4 polishing cloths, 100 cleaning patches, 2 oil bottles (empty), and even a gun cleaning mat. NOTE: For competition rifles, we recommend using high-quality ONE-PIECE cleaning rods.
When you make a reloading mistake, you may need to “pull down” assembled ammo. The embedded UltimateReloader.com video demonstrates how to use the Hornady Cam-Lock bullet pulling system.
When Reloading Goes Bad — The Danger of Over-Charging
Our friend Gavin Gear of UltimateReloader.com was recently reloading some 9mm pistol ammo with his Hornady progressive press. As part of his reloading procedure, he visually checks the cases — and he noticed that the charges seemed high. Sure enough, his most recently-produced rounds were about two grains over spec. He diagnosed the issue: “I was using a powder measure without a baffle. What happened was, over the course of the loading session, things settled in, and the charge level increased.”
Not knowing just when his powder measure started delivering too much powder, Gavin decided, for safety’s sake, to pull down all the ammo he had just reloaded. Yes that’s time-consuming, but it’s better than the alternative — having a dangerous Kaboom while shooting. With fast-burning pistol powders, a two-grain over-charge could cause a blown case, damaged firearm, and/or serious injury.
Watch Cam-Lock Bullet Puller Used to Remove Bullets from Loaded Ammo:
Use of Bullet Puller starts 4:00 minutes into video.
Gavin says it is vitally important to perform safety checks during the reloading process: “You’ve got to do it — check every single round to make sure there IS powder, and that there’s not too MUCH powder. Double, Triple, Quadruple check your components… and your powder charges. You can’t be too careful.”
To pull down a loaded round, first place the cartridge in the shellholder on your press ram. Then raise the round up into the bullet puller device installed where a die would go. The Hornady Cam-lock bullet puller works by clamping the bullet in a collet when you flip down the red-coated lever. Then, with the case held by the rim in the shell-holder, the bullet exits the cartridge as the press ram is lowered. It takes time, but it’s pretty fool-proof once you get the hang of it. This entire process is illustrated in Gavin’s video, starting near the four-minute mark.
The Hornady Cam Lock Bullet Puller has four (4) key components: 1. Cam-Lock die body; 2. Cam-Lock lever; 3. Stem; and 4. Collet (Caliber-specific).
NOTE: In order to use this tool, you’ll need the appropriate collet for each diameter range of bullets you intend to pull. For example use collet #3 for 6mm, collect #6 for 7mm, and collet #7 for .308 Caliber.
RCBS Lock-Out Die
A good safety option for users with progressive presses is the RCBS Lock-Out Die. This has a charge detection rod that dips into each case after powder has dropped. You adjust the die to the proper charge height for your desired load. If the actual dispensed charge is too high or too low, the Lock-Out Die senses the problem and stops the press from advancing to the next case (it does this by preventing the ram/shellplate from fully elevating). We’ve used the Lock-out die with success for both pistol and rifle cartridges. It’s sensitive to about one-half grain with pistol powders.
This Lock-Out Die works with Hornady and Dillon progressives as well as with RCBS progressives. It does take up one die station on the press.
RCBS was founded in 1943 by Fred T. Huntington in Oroville, California. Huntington was a dedicated shooter but found it difficult to obtain quality varmint bullets. However, after reading about making a die to swage .22 rimfire cartridge cases to form jackets for bullets, he began to craft his own dies in the back room of his father’s Oroville laundry and dry-cleaning business. Because the resulting bullets were used to shoot rock chuck varmints, he named them Rock Chuck Bullet Swage dies, later shortened to RCBS.
RCBS Lock-Out Die
