The Great Northern Gun Grab is About to Begin
Article By Larry Keane, NSSF Gen. Counsel and Sr. VP (Gov’t Affairs)
New Gun Control Measures
Prime Minister Trudeau fulfilled his ill-advised promise by announcing the introduction of a bill in Canada’s Parliament, labeled C-21, that would usher in crushing gun restrictions. Included in the bill is everything from a provision to allow anyone to petition a police chief to revoke a firearm license and the courts to seize firearms for up to 30 days. The bill includes a magazine ban for handguns with a capacity greater than 10 rounds and centerfire rifle magazines with a capacity greater than five rounds. It would impose a strict regimen for those who choose not to participate in the confiscation program with onerous and nearly impossible requirements to keep their firearms. A two-year amnesty period for owners of these now-banned firearms will expire in April 2022.
Gun Confiscation
The biggest concern of this gun control push is the outright confiscation of firearms by the government. Prime Minister Trudeau and his allies are labeling it as a government “buyback.” However, this is using Canadian taxpayer funds for the government to buy back something it never owned in the first place.
More shocking is that no government official will put a price tag on what this would cost. Public Safety Minister Bill Blair said the government will have a better picture of the cost when it knows how many owners want to “sell” their firearms and for how much, according to a Canadian Broadcasting Channel (CBC) report. Minister Blair guessed it would run between $300-400 million if 150-200,000 gun owners demand $1,300 per firearm. Minister Blair earlier pegged the cost at $600 million.
Critics argue the cost would be much higher. Those critics were right about Canada’s previous gun registration scheme being a colossal failure with an enormous price tag. That was pitched at costing only $2 million but ran over $2.7 billion before being scrapped. The same critics are pointing to New Zealand’s confiscation model and [estimate] the Canadian cost at $1.6-$5 billion in just the first year. That’s just administrative costs, not including the bounty Prime Minister Trudeau would pay for each firearm.
Noncompliance — Are There Alternatives?
Canadians who don’t participate in surrendering their firearms to the government will be forced to endure a rigorous set of rules and inspections to keep their firearms – while they can and while they’re alive. Those who don’t hand over their firearms could keep them under strict conditions to not use, import, further acquire, sell or bequeath them. Those individuals would also be required to complete the Canadian Restricted Firearm Safety Course and upgrade their licenses to a “Restricted Possession and Acquisition Licence.” Of course, this would incur all associated course and license fees, along with registering any firearms with the Firearms Registrar, complying with enhanced storage requirements and periodically providing information on firearm storage to ensure compliance.
But Wait, There’s More
The proposed confiscation law would be so much more than just a gun grab. It would also give municipalities the option of enacting their own local ban on handguns. Some local laws might not go that far. Local laws might only regulate home storage of handguns, requiring them to be stored at shooting clubs and ranges. This would create a patchwork of differing gun control laws and pitfalls for Canadian gun owners. Enforcement would become a nightmare.
Matt DeMille of Ontario Federation of Anglers and Hunters, told the CBC, “Adopting measures across the province in a patchwork is going to be very difficult for people to understand.” Conservative public safety critic Shannon Stubbs added, “This part of the bill doesn’t address the major problem, which is the illicit use of illegal guns in crime.”
Another provision in the bill would make it illegal to advertise a firearm that depicts violence against a person. Read strictly, that would make it a crime to advertise a gun as a self-defense tool. Instead of taking on the criminals who misuse firearms, Prime Minister Trudeau would lock up advertisers who tell his citizens they don’t have to be willing victims and can use firearms to defend themselves.
“Gun ownership in Canada is a privilege… not a right.” — Public Safety Min. Bill Blair
This sounds like a dystopian fairy tale, but the reality is this is happening on the doorstep of the United States. Minister Blair made it clear why Prime Minister Trudeau is able to get away with it: “Gun ownership in Canada, in this country, is a privilege and not a right,” Minister Blair explained to Canada’s Global News. It’s a privilege that’s predicated on the strict adherence to our laws, our regulations, and our restrictions.”
Opposition to Confiscation Program
That’s not stopping opponents from saying Prime Minister Trudeau is overstepping. The Canadian Association of Chiefs of Police said it won’t support a plan for handgun bans. Vancouver police chief Adam Palmer heads the organization and previously said there are laws against the illegal use of handguns. Further gun control laws won’t solve this problem.
Manitoba Premier Brian Palliste said the handgun ban is “not going to work.” Saskatchewan Premier Scott Moe is critical of Prime Minister Trudeau’s gun grabs. Alberta Premier Jason Kenney denounced the moves for targeting law-abiding gun owners and not criminals. Ontario’s Premier Doug Ford said the national government should focus on enforcing laws and putting criminals behind bars, not seizing guns from law-abiding citizens.
In light of President Joe Biden’s gun control wish list, it’s worth nothing the importance of the 27 words of the Second Amendment. It’s also worth watching the cost of dollars and rights an out-of-control gun control agenda can do to a nation’s citizens.
If you are a F-Class competitor or use machine tools, chances are you know Shiraz Balolia. Shiraz is one of America’s top F-Class shooters, an all-star competitor who has won major titles, including three straight Canadian F-Open National Championships. Shiraz also owns Grizzly Industrial Inc., a large, successful enterprise he founded in 1983. For 38 years, Grizzly has provided quality tools to wood-workers and metal workers. Grizzly’s catalog is now over 700 pages.
Shiraz’s life story is an interesting one. He came to the USA from Kenya, and then became a very successful businessman, building Grizzly Industrial into a major player in the tools/parts/machinery business. Shiraz also founded Bullets.com, which sold firearms accessories and reloading components for some years. Shiraz’s effort to start Bullets.com was an outgrowth of his desire to “give back” to the shooting sports, the hobby he loves.
To cover his noteworthy business career and life, Shiraz has written an impressive 288-page autobiography, entitled A Bad Case of Capitalism (referring to his love for the world of selling products). This book covers Shiraz’s early years though the present, providing a “tale of travel through war-torn countries, courtroom battles, success, failure, and everything in between.” It explains the challenges of starting direct-to-consumer businesses, first via mail-order and then adapting to the new online world.
We enjoyed the book because it provides a clear inside look at the challenges of starting a business. And we are grateful that Shiraz, through his businesses, has been a strong supporter of AccurateShooter.com for more than a decade. Balolia’s autobiography has been described as “equal parts business primer, history, and collection of life lessons”. The book shows how vision and determination can create a true American success story.
Readers have enjoyed the book and the lessons it offers on how to build a business:
“As someone who loves to create things with his hands, I was immediately drawn to this book, as Mr. Balolia is basically the father of machinery for woodworkers like me. It’s a great read that opens your eyes to a place and time I’d never heard of before, and it paints a great picture of determination and grit…. This book is certainly a motivating tale, and it shows that with a supportive family and vision (and a ton of hard work) you can do anything you dream.” — Jameson H.
“This is as much a story of Mr. Balolia as it is of Grizzly Industrial. In this book, and probably real life, the two are inseparable. From humble beginnings to a substantial empire of industrial equipment you have to admire and applaud the success story and this chronicle of hard work and perseverance. Impressive, very impressive.” — Own One
Grizzly Lathes for Gunsmiths
In this video, Shiraz talks about Gunsmithing Lathes sold by Grizzly.com:
Shiraz Uses the Machines That He Sells
Shiraz is not just a talented business leader and ace marksman. He is also a very skilled fabricator and woodworker. He has crafted guitars, and worked on his own gunstocks. This shows an F-Class Stock Shiraz upgraded using Grizzly Industrial machinery. The modified stock has a significantly lower Center of Gravity, riding 1/2″ lower in the front bag. Shiraz says the modified stock performed great.
Shiraz Balolia (left) and Norma Managing Director Paul-Erik Toivo.
Do you enjoy shooting pistols for sport, or perhaps you carry a handgun for self-defense? If you’re like most of us, you might benefit from a “refresher course” on the fundamentals of handgun shooting. The NRA has created a useful Infographic that covers important basics of handgun marksmanship — key things such as Sight Alignment and Trigger Control.
Here are the first two (2) lessons. Click the link below to see all SIX (6) training topics: Sight Alignment, Sight Focus, Trigger Control, Breath Control, Hold Control, and Follow-Through.
Video Shows Sight Alignment, Grip, Stance, Trigger Control and More
In this USAMU video, SGT Shane Coley talks about the basics of sight alignment and trigger control. But then SGT Coley talks about other important control factors such as grip, arm position, and body stance. For rapid-fire shooting, you need to have a good arm and body positioning to control recoil and get back on target quickly. This video is a valuable complement to the NRA Infographic because it demonstrates all the important pistol fundamentals during live fire, at the range.
Modular Driven Tecnologies (MDT), known for its rifle chassis systems for PRS/NRL disciplines, has a new ultra-lightweight chassis for hunters. The new HNT26 Chassis System is MDT’s first truly purpose-built hunting chassis. The HNT26 weighs a mere 26 ounces for the fixed model, a few ounces more for the folding-stock version. This new hunting chassis includes V-Block bedding, LOP and comb adjustment, and a “snag free design” to help hunters moving through brush. The HNT26 chassis will be offered in a Cerekote finish in either Black Carbon Fiber or Cobalt Green starting at $1299.95. Ini
The MDT HNT26 Chassis is constructed with a magnesium alloy base, carbon fiber fore-end, carbon fiber grip, and foam-filled carbon fiber buttstock. The HNT26 chassis will fit: Rem 700 Short Action (and clones), Rem 700 Long Action CIP 3.850 (and clones), Savage Short Action, Savage Long Action CIP 3.850, Tikka T3 Short Action and Tikka T3 Long Action. Initially, these are all right bolt version only.
CLICK photo to see full-screen BIG version.
Tripod Compatibility with ARCA rail: “With the increased number of hunters using ARCA tripods, we have included an option to choose a carbon fiber fore-end with an integral ARCA rail, as well as a foldable buttstock version for compact storage.”
MDT HNT26 Hunting Chassis System SPECIFICATIONS:
Ultralight design weighs between 26 oz. and 31 oz. depending on configuration
V-Block bedding system with free floating barrels up to 1.25″ diameter
Fixed and folding buttstock version available (folding 31 oz.)
Chassis body machined from AZ61A magnesium alloy
Carbon fiber-enclosed fore-end with MLOK, QD mount, Sling Swivel Mount
Foam-filled carbon fiber buttstock deadens sound and vibrations
Low profile mag latch integrates seamlessly into trigger guard
Option for ARCA rail integrated into carbon fiber fore-end
Compatible with AICS-style mags (MDT 3-RD Polymer mag fits flush)
Front and rear sling swivel mounts and front and rear QD
Vertically adjustable cheek riser with soft touch foam pad
Accepts AR Grips and MDT ultra lightweight carbon fiber grip
12.5” minimum LOP with adjustable spacer system
Titanium action / grip screws
The MDT HNT26 Chassis System is sold as a complete chassis kit including magnesium alloy base, foam filled carbon fiber buttstock, carbon fiber enclosed fore-end and a carbon fiber grip. Modular Driven Technologies (MDT) is precision rifle chassis manufacturer with offices and production in Chilliwack, BC Canada and Everson, WA USA.
Allen Company has introduced Hardrock AR500 Targets, a new series of affordable steel targets suitable for rimfire rifles and pistols as well as centerfire pistols. Note, these targets are NOT designed for centerfire rifles (you can damage the targets with repeated impacts). Most Hardrock targets are supplied with frames with front legs that slide into the ground for added stability.
Allen Hardrock Steel Target Systems
Allen’s Hardrock family of targets are constructed from heavy-duty 1/4″-thick AR500 hardened steel. They are all finished with a high-visibility cross/bulleye pattern that makes aiming easier. After a bit of shooting, however, you will need to paint the targets, and/or supply your own pasters. However we do like the red ring/black diamond/orange center graphics supplied on these Hardrock targets out of the box.
Allen AR500 Hardrock Steel Target Products:
Circular gong targets 4″, 8″, 10″ diameter
Note: These must be hung with chains or straps you supply*
MSRP $19.99 to $44.99
Allen Self-Healing Polymer Targets — Reactive Movement without the “Clang” of Steel
Along with its new AR500 targets, Allen offers some unique “self-healing” orange polymer reactive targets. These will move when hit, but the bullet hole will then close up, as the rubbery, orange polymer heals itself. There are 10 different EZ-Aim Self-Healing Targets including ground rollers, Spinners, and Silhouette-style “critter” targets. Here are three versions:
*To mount the Hardrock Gongs, Allen offers a Quick-set Steel Target Stand and a Rubber Strap Gong Hanging Kit, priced at $62.99 and $16.99 respectively.
Precision Rifle Challenge on Shooting USA This Week
This week, Shooting USA TV features a show that should interest PRS/NRL fans, tactical marksmen, and long range hunters. Run in Utah’s backcountry, the Hornady Precision Rifle Challenge is a unique long range competition with serious wind and elevation changes.
This isn’t a typical PRS Pro Series match by any means. Participants in this challenging Precision Rifle match encounter tough conditions not typically seen in other tactical matches.
This video is great — lots of equipment closeups, stage set-ups, plus drone footage of range.
This Shooting USA episode airs Wednesday, February 24, 2021, at 9:00 PM Eastern (8:00 PM Central) on the Outdoor Channel. If you miss that, it runs again on Thursday afternoon. In addition, you can watch all episodes of Shooting USA on the VIMEO channel by subscription. Each episode is just $0.99.
Former Army Ranger sniper instructor Ryan Cleckner is the author of the best-selling Long Range Shooting Handbook. Cleckner hosts a series of videos that cover shooting techniques appropriate for tactical and PRS-type disciplines. Here are five short videos that cover various aspects of shooting techniques and rifle set-up. We think PRS/NRL competitors (and long-range hunters) can benefit from these videos.
“Consistency is the key to accuracy.
You need to think about a system of how you’re going to shoot that is not only comfortable, but [is] repeatable when you’re shooting.” — Ryan Cleckner
In this first video, Cleckner explains proper scope position. Ryan finds that some shooters place the scope too far forward or too far rearward. If the scope is too far back you may have issues with eye relief and stock reach to shoulder. If it is too far forward, you may have cheek-weld problems or get neck strain.
Cleckner offers a simple method to check your scope position: “To see if your scope is set up properly … close your eyes, lay your head on your gun, get completely comfortable, and only when you are set-up, then open your eyes. If you can’t see clearly through your scope, CHANGE something [such as comb height or scope position]”. “When you open your eyes, if you see some scope shadow [i.e. the black ring around the edge of the scope picture], figure out which way you need to move your head to get rid of that shadow, and then make adjustments to either your position, the rifle, or the scope.”
Cleckner prefers shooting off a bag when in the prone position, when that is practical. The bag provides a more stable support than a small Harris-type bipod, doesn’t require pre-loading the rifle, and there is less bounce or hop on recoil.
Former Army Ranger sniper team leader Ryan Cleckner explains how important it is to keep your rifle straight up and down when long-range precision shooting. Cleckner demonstrates with an AR-10 modern sporting rifle how slight cant to your rifle can cause a miss over long distances.
Here Cleckner covers some of the basic points of trigger control on tactical-style rifles. These basic principles apply to both single-stage and two-stage triggers. NOTE: For benchrest rigs, with ultra-light pull weights, more refined techniques may be appropriate.
In tactical events, when you’re shooting on the clock and loading from a detachable magazine, you should manipulate the bolt smoothly but strongly. Here Cleckner demonstrates how to cycle a tactical-type rifle. He says, “You should be running the bolt on your rifle with authority. Run it like you mean it!” NOTE: Completely different techniques are appropriate for custom benchrest rifles that manually feed.
Long Range Shooting Handbook — A Good Resource
Cleckner’s Long Range Shooting Handbook covers a wide range of topics important for precision marksmanship — both shooting skills and technical matters. You can view Sample Chapters from Ryan’s Book on Amazon.com. Cleckner’s book is designed as an intro to key concepts such as MOA vs. Mils, External Ballistics, and Environmental Effects. Included are personal tips and advice based on Cleckner’s years of experience as a sniper instructor and special operations sniper.
The Long Range Shooting Handbook is divided into three main categories: What It Is/How It Works, Fundamentals, and How to Use It. “What It Is/How It Works” covers equipment, terminology, and basic principles. “Fundamentals” covers the theory of long range shooting. “How to Use It” gives practical advice on implementing what you’ve learned, so you can progress as a skilled, long range shooter.
In the archives of The First Shot (the CMP’s Online Magazine), SGT Walter E. Craig of the USAMU discusses physical conditioning for competitive shooters, particularly High Power competitors. Fitness training is an important subject that, curiously, is rarely featured in the shooting sports media. We seem to focus on hardware, or esoteric details of cartridge reloading. Yet physical fitness also matters, particularly for High Power shooters. In his article, Craig advocates: 1) weight training to strengthen the Skeletal Muscle System; 2) exercises to build endurance and stamina; and 3) cardiovascular conditioning programs to allow the shooter to remain relaxed with a controlled heart beat.
SGT Craig explains: “An individual would not enter a long distance race without first spending many hours conditioning his/her body. One should apply the same conditioning philosophy to [shooting]. Physical conditioning to improve shooting skills will result in better shooting performance[.] The objective of an individual physical training program is to condition the muscles, heart, and lungs thereby increasing the shooter’s capability of controlling the body and rifle for sustained periods.”
In addition to weight training and cardio workouts (which can be done in a gym), SGT Craig advocates “some kind of holding drill… to develop the muscles necessary for holding a rifle for extended periods.”
For those with range access, Craig recommends a blind standing exercise: “This exercise consists of dry-firing one round, then live-firing one round, at a 200-yard standard SR target. For those who have access only to a 100-yard range, reduced targets will work as well. Begin the exercise with a timer set for 50 minutes. Dry-fire one round, then fire one live round and without looking at the actual impact, plot a call in a data book. Continue the dry fire/live fire sequence for 20 rounds, plotting after each round. After firing is complete, compare the data book to the target. If your zero and position are solid, the plots should resemble the target. As the training days add up and your zero is refined, the groups will shrink and move to the center.”
Fitness training and holding drills help position shooters reach their full potential.
Training for Older Shooters
Tom Alves has written an excellent article A Suggested Training Approach for Older Shooters. This article discusses appropriate low-impact training methods for older shooters. Tom explains: “Many of the articles you will read in books about position shooting and the one mentioned above are directed more toward the younger generation of shooters in their 20s. If you look down the line at a typical high power match these days you are likely to see quite a few folks who are in their middle 30s and up. Many people in that age range have had broken bones and wear and tear on their joints so a training program needs to take that into account. For instance, while jogging for an extended period for heart and lung conditioning may be the recommended approach for younger folks, it may be totally inappropriate for older people.”
Tired of carrying old-fashioned paper Score Books? Well now you can go digital — Creedmoor Sports offers a full-featured Scoring Book App that lets you plot your shot locations/scores using an Android device or Apple iPhone or iPad. The price is right — FREE! Just visit the Apple App Store or Google Play Store to download the App for FREE.
Record Match and Practice Data
This new App, available for free in the Apple App Store, and the Google Play Store provides all the same functions and capabilities of the traditional, spiral-bound print-format Creedmoor Rifle Data/Score Book, but with the convenience and ease of recording your match and practice information with your mobile device. With this App you can break your 20 shot slow-fire segments into either 10- or 20-shot targets, and also opt for sighting shots. All the specific event data can also be recorded, such as location, wind, light etc., along with wind and elevation adjustments.
COMMUNICATIONS Restrictions: In some matches you are not allowed to have electronic communication ability, so you may have to set your iPhone to “Airplane Mode”, or use this only with an iPod (which does not have two-way communication capability).
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. KYGUNCO — Anderson AM-15 (AR) Lower Receiver, $89.99
⏺ More gun control is coming — get an AR lower while you can
With the developments in Washington, it will likely become more difficult to purchase an AR-platform rifle in the future. You may want to get an AR lower now, while you can, at a reasonable price. KYGUNGO (Kentucky Gun Co.) is selling the Anderson AM-15 AR15 Lower Receiver for just $89.99 (cash price) or $92.69 (credit card). This is a mil-spec 7075 T6 Forged aluminum lower, Type 3 Hard Anodized. Flat-Rate Shipping to your FFL is just $11.99. These will probably sell out quickly.
2. Midsouth — Delton AR-15 Lower Parts Kit with Grip, $52.99
⏺ Very complete AR-15 parts kit at low price
Here’s what you need to fill up that AR-15 lower receiver featured above. This Delton Complete Lower Receiver Parts Kit contains all the attachment pins, trigger system parts, and springs you need, along with a classic AR grip. Installation is straight-forward with instructions available online.
3. Amazon — Tipton Best Gun Vise, $84.84
⏺ Versatile, stable, works with all rifles, including ARs
You need a stable platform when cleaning your long guns, but most gun cradles are too light or unstable to do the job properly. If you’re looking upgrade to a better solution, grab the Tipton Best Gun Vise. The vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance, or gunsmithing. This vise is easily configurable to handle bolt-action rifles, break-open shotguns, AR-15s, and handguns. You can also purchase this excellent Gun Vise for $89.99 at Midsouth Shooters.
⏺ Hard to beat bench at this price; swivel seat, 60-lb total weight
The Caldwell® Stable Table, a 60-lb tripod-style bench, offers a 34″L x 23″W top surface with a bench seat that adjusts from 16″ to 22″ in height. The polymer top has two integrated carry handles. These handles double as anchors for two gun-holding forks that can be used when cleaning your rifle. Leg adjustments keep the table and seat parallel even on uneven ground. The overall unit breaks down into seven pieces using a quick-release pin system. Maximum weight capacity is 350 pounds. This bench has earned 80% 5-star reviews from actual purchasers.
⏺ Great deal on easy-to-use, accurate, barrel-attached Chronograph
Priced at just $159.99 at MidwayUSA, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetospeed’s XFR adapter (sold separately), data can be transferred easily to your mobile device. READ Magnetospeed Sporter Review. NOTE: You MUST add the item to cart to see the $159.99 SALE price. This typically sells elsewhere for around $180.00.
6. EuroOptic –$100 Rebate on Leupold SX-4 Spotting Scopes
⏺ Instant $100 savings on excellent HD Glass spotting scopes
Get Instant Savings of $100 with the purchase of any SX-4 Pro Guide HD Spotting Scope. Offer valid February 1, 2021 through April 4, 2021, while supplies last. Leupold offers SX-4 HD spotters in 65mm objective and 85mm objective models, with both angled and straight versions. If you can’t find your preferred SX-4 in stock at EuroOptic, this Rebate will be available at other authorized Leupold dealers such as Grafs.com.
7. MidwayUSA — Caldwell Rock BR Rest + Bag, $99.99
⏺ Good inexpensive system for varminters or sight-in duties
Here’s a great bargain for someone looking for a basic functional benchrest set-up. This Caldwell Rock BR Rest and Bag Combo could be a gift to a family member or a junior shooter. Or this $99.99 combo would suffice for someone testing a hunting rifle. The front rest adjusts for both windage and elevation.
⏺ Owners say it is sharp with good features for price
This Sawback Bowie spring-assisted folding knife, just $10.95 on Amazon, has a 3.5″ blade. There is a curved cutting edge with a serrated section near the handle. Actual purchasers state: “This knife is very well made with a tight feel. No play at all. The assisted open is excellent [and] they come very sharp too”, and “This is a good quality knife. It’s solid and a bit heavy, really good looking and comes pretty sharp. Overall its a great knife.”
⏺ Great accessories for safes — light alone is worth the price
This Lockdown Safe Accessory Package includes one Large Organizer, a Vault Light, and a Large Document Holder. The bright LED Vault light runs on AAA batteries so no wiring is needed. The Document holder easily mounts to your safe’s door or sidewall. And the Large 18″x12″ Organizer will secure valuables, knives, and even small handguns. It comes with hooks for carpeted interiors and magnets for metal interiors. This KIT normally sells for $49.99 so it’s a STEAL at $12.99 — that’s 74% OFF.
Gun Confiscation
In the archives of 
Tired of carrying old-fashioned paper Score Books? Well now you can go digital — 
