Competing at the Camp Perry National Matches is a “bucket list” item for every serious marksman. The National Matches were first held in 1903, moved to Camp Perry, Ohio, in 1907 and continue to take place every summer at Camp Perry. The National Matches have become a huge, national shooting sports festival with well over 6,000 annual participants.
Year 2019 Camp Perry NM Competition activities begin with NRA/CMP pistol matches on July 8-14, 2019. The CMP Junior Rifle Camp, USAMU SAFS, and Smallbore matches run the next week, with the hugely popular Rimfire Sporter Match on July 21. High Power Rifle events kick off on July 23 with the 4-Man Team Match and rifle events run continuously for the next two and a half weeks.
Here are some key dates for RIFLE events:
July 27 – CMP/USAMU Rifle SAFS
July 29 – President’s 100 Rifle Match
July 30 – National Trophy Individual Rifle Match
July 31 – National Junior Team Match
August 1 – National Trophy Team Match, National Carbine Match
August 2 – National Trophy Infantry Team Match (“Rattle Battle”)
August 3 – M1 Garand Match, Springfield/Vintage Bolt Rifle Match
August 4 – M1A Match, Springfield/Vintage Bolt Rifle Match
August 5 – CMP Vintage Sniper Rifle Match
August 5-8 – CMP Long Range Individual Matches
August 9 – Camp Perry Palma Match
Larry Medler has come up with a smart little invention — a simple, inexpensive Empty Chamber Indicator for rimfire rifles. It is made from a section of plastic “weed-wacker” line and a wooden ball from a hobby shop. Larry says he was inspired by Juniors who used something similar for their 17-Caliber Air Rifles.
At a Rimfire Sporter match like this, all shooters must have an Empty Chamber Indicator.
Construction Method: First, drill a 7/64″ diameter hole all the way through the 1″-diameter wooden ball. Then enlarge half of that 1″-long hole using a 13/64” diameter drill. Next insert an 8″ piece of heavy duty (0.095″ diameter) weed wacker line through the ball, leaving about 2″ on the side with the bigger-diameter hole. Then, with the short end of the line, fold over the last half-inch so the line is doubled-over on itself. Then slide the line into the ball, stuffing the doubled-over section through the 13/64″ (large) hole. Finally, pull the longer end of the line until the doubled-over section is flush with the outside of the ball. This gives you a sturdy line attachment without messy adhesives. When the assembly’s complete, hold the ECI by the tail and dip the ball in yellow paint. If you’re making more than one ECI, you can drill horizontal holes in a spare block of wood and use that as a drying rack.
The Empty Chamber Indicator for Smallbore Rifles
Larry explains: “At all Highpower rifle matches, silhouette matches, and other shooting events I have attended, Open Bore Indicators (OBI), or what are now called Empty Chamber Indicators (ECI) have been mandatory. The NRA’s yellow ECI for Highpower rifles is easy to use and has been well-received by the shooters. However, I had not seen a truly workable ECI for 22 rimfire rifles — until I visited Michigan’s Washtenaw Sportsman’s Club where I saw juniors using ECIs for their 17 Caliber Air Rifles. Someone at the club made the empty chamber indicators by attaching an 8″ piece of weed wacker line to a 1″-diameter wooden ball, painted bright yellow. I now make similar ECIs for the 22 rimfire silhouette matches I run.”
Here’s a cool deal just in time for Father’s Day. Buy any new SIG Sauer P226 pistol now through June 30, 2019 and get a SIG STORE Rewards Coupon for a free X-FIVE Air Pistol. SEE DEAL HERE.
This special 2 for 1 Father’s Day Promotion offer runs from 06/01/2019 until 06/30/2019. Mail all required documentation to the address listed on the mail-in form or upload required documentation directly to SIG’s website. Submissions must be submitted or uploaded by 07/31/2019. Please allow up to 7 business days for processing. CLICK HERE for more details.
Claiming your rewards is easy, just visit Sigsauer.rebateaccess.com, follow the instructions to complete the form, and upload or mail your receipt. Once validated you will receive a promo code that can be redeemed at Sigsauer.com for an X-FIVE Air Pistol.
Applied Ballistics, LLC is proud to announce that its founder and owner Bryan Litz, has received the National Defense Industrial Association (NDIA) 2019 Carlos N. Hathcock II Award. Bryan was given this honor on June 4, 2019 at the NDIA Forum in Virginia.
The Hathcock Award honors an individual who, in the opinion of the Small Arms Committee Executive Board, has made significant contributions in operational employment and tactics of small arms weapons systems which have impacted the readiness and capabilities of the U.S. military or law enforcement.
Not just a brilliant ballistics expert, Bryan Litz is also a Championship-winning marksman.
Litz’s contributions to the U.S. Military include his numerous publications to help snipers understand complex external ballistic problems, promoting the advanced G7 ballistics model vs. the older G1 drag model, and developing Applied Ballistics solvers for Kestrel weather meters and other devices in widespread use by snipers for the U.S. Military and NATO allies. Bryan is also a frequent speaker at DoD forums and conducts ballistic seminars across the country.
Bryan stated: “It is truly humbling and deeply gratifying that my work has value to our nation’s Armed Forces. Being selected for the Hathcock award is the highest honor I’ve received in my career.”
Bryan received the award on June 4, at the NDIA 2019 Armament Systems Forum in Fredericksburg, Virginia. Past winners of the Hathcock Award include Todd Hodnett, Buford Boone, and SGM Pete Gould (U.S. Army Retired).
Bryan Litz helped develop global-leading ballistics solutions for civilian and military marksmen. Now Applied Ballistics solvers are integrated into Kestrel Weather Meters as well as advanced electro-optical devices. Bryan also helped create the successful Applied Ballistics APPs for iOS and Android smartphones.
Here’s the super-speedy way to turn case-necks. Our friend Erik Cortina figured out how to turn his match cartridge case-necks using his milling machine. Erik told us: “While in Raton, Mid Tompkins told me that he turns his brass on milling machine. He said he could do about 500 in two hours, so I decided to try it.”
Erik fitted a Don Nielson “Pumpkin” neck-turner to the mill, and he used a modified 21st Century case holder to secure the brass. As you can see from this video, Erik was very successful with the process. The tool spins at 1500 rpm, turning Lapua 6.5-284 cases that have been necked up to 7mm.
Video Shows Erik Cortina Neck-Turning Cases with Milling Machine:
Cartridge Brass: Lapua 6.5-284 necked up to 7mm
Lubricant: Lithium grease inside and outside of neck
Neck-Turner: Nielson Pumpkin running at 1500 RPM
It’s hard to argue with Erik’s results. Here are his turned Lapua cases, which have neck-wall thickness consistent to two ten-thousandths of an inch. Think you could do better turning manually?
Some of Erik’s Facebook friends had questions about this process:
Q: Who makes the shell-holder?
Erik Cortina: I did! The shell-holder you can get from 21st Century. I Tig-welded a punch as a handle.
Q: I love the idea of working smarter not harder! Any galling issues? What are your mitigation techniques?
Erik Cortina: No issues. I use lithium grease in spray can. Makes a foam that I dip necks into.
Q: Shouldn’t either the case or the cutter be floating to allow most precise neck turning?
Erik Cortina: Up until [I tried this] I believed the same thing. I was going to build a floating case holder but decided to try rigid setup on a few cases before I built it. Results were great. Neck thickness doesn’t vary more than .0002″, which is same as when I was doing it with floating case holder on the lathe.
Q: Any problems with the Pumpkin changing the cut as it heats up?
Erik Cortina: No — there were no issues with that.
NOTE: Erik Cortina is a very skilled machinist who custom-crafted fittings used for this process. This kind of neck-turning with a milling machine may not be for the everyday hand-loader!
Nielson “Pumpkin” Neck-Turner
The circular orange cutting fixture on Erik’s Milling Machine is a Don Nielson “Pumpkin” neck-turning tool. Don designed this tool to be used by hand or with power. The Pumpkin boasts an eccentric mandrel that allows the cut to be adjusted easily in precise .0001″ increments. Benchresters like this as it allows for very precise control of cut depth and neck-wall thickness.
Jason C., commenting on Erik’s YouTube video stated: “I have a couple of those too. Nothing cuts like a Pumpkin. [Don Nielson] made the best cutter tool ever.” These are still available if you ask around. The photo shows Don with a case-holder mounted to a power assembly. A talented machinist and tool-maker, Don has also been a successful short- and long-range benchrest shooter, who has won NBRSA 600-Yard Championships. CLICK HERE to read about Don’s success with the 6.5×47 Lapua.
Nielson Neck Turner with carbide mandrel. Photo Courtesy Butch’s Reloading.
Imagine if a man was asked to leave a restaurant for wearing a Gay Pride shirt. Or if a women was refused service because she was wearing a headband with a #MeToo message. The mainstream media would be in a frenzy. The incident would make national news. Liberal politicians would be holding angry press conferences, and CNN talking heads would be loudly demanding new legislation.
But guess what, there is another kind of discrimination in our society, a form of intolerance that the mainstream media actually emboldens — hatred towards gun owners. Intolerance towards those who support the Second Amendment — even those who have served their country in uniform.
Recently in Maui, HI, a restaurant manager demanded that disabled Vietnam veteran Jimmy Barber and his wife leave the establishment solely because Jimmy was wearing a shirt that said “Ultimate Reloader” and included a logo with the outline of a cartridge between the letters U and R.
Jimmy Barber served in Vietnam as a Navy Seabee “in-country” from 1970-71. He now suffers from heart disease because of exposure to agent orange. And the Maui eatery demanded that he (and his wife) leave the premises simply because his shirt said “Ultimate Reloader”. That’s despicable.
Isn’t it ironic that this intolerance occurred in Hawaii? Were it not for the sacrifice of American service men and women in the Pacific during WWII there is a good chance that the Hawaiian islands would no longer be part of the United States.
In a letter to Gavin Gear of UltimateReloader.com, Jimmy revealed: “My wife and I are in Maui. We were asked to leave a restaurant because I was wearing one of your t-shirts. I did not make a scene and I was very proud to leave.” Jimmy, by the way, is a dedicated pistol and rifle shooter who reloads a dozen cartridge types.
After learning of this incident, Gavin Gear contacted Starline Brass. Starline has decided to send Jimmy 250 new brass cases — just a way of saying “thanks” to Jimmy for his service to his country.
How to Stand Up for Your Rights
We all need to do our part to preserve our gun rights. Gavin Gear has collaborated with The Gun Collective on YouTube to explain what we can do to preserve our gun rights. Gavin states: “I do appreciate everyone out there in the gun community that is fighting for our rights. We need to stand together! And thanks Jimmy for ‘representing’ Ultimate Reloader!”
Folks have asked if there is a tool that can remove obstructions from a Lapua small, BR-sized flash hole without opening the hole size. The Lapua PPC/BR flash hole is spec’d at 1.5mm, which works out to 0.059055″. Most of the PPC/BR flash-hole uniforming tools on the market use a 1/16″ bit which is nominally 0.0625″, but these often run oversize — up to 0.066″.
If you want to just clear out any obstructions in the flash hole, without increasing the flash hole diameter, you can use an inexpensive, five-dollar “pin vise” with an appropriate drill bit. For $1.00, eHobbyTools.com sells a 1.5mm pin vise bit, item 79186, that matches the Lapua flash hole exactly. Other vendors offer a #53 pin vise bit that measures .0595″ or .060″ (depending or source). An 0.0595″ bit is close enough. You can find pin vises and bits at hobby stores, and eHobbyTools sells pin vises for $4.99 to $7.99.
Precision rifle shooters don’t have to hit a big-league fastball, or launch a top-fuel dragster in the blink of an eye. Nonetheless, reaction times are important in our sport — both for competitive shooters and hunters. Want to catch that prairie dog before he slips down his hole? You’ll need to be quick. Want to win at short-range benchrest? Then you’ll need to watch your windflags and respond quickly to a change. Miss a major wind-shift and you could ruin your whole weekend.
Here’s a fun test of reaction times from HumanBenchmark.com. The way it works is that, after clicking “Start”, you wait until the background color changes from red to green. The instant you see green, immediately click your mouse. The average (median) reaction time is 215 milliseconds.
Tips for Faster Times
Here are three tips to speed up your reaction times:
1) Respond to the color change, rather than wait to read “CLICK!”.
2) Try focusing at the corner of the colored box, rather than the center.
3) Have your index finger “poised and ready” over the left button–you can shave milliseconds by very slightly depressing the button before you actually click.
Shooters from across the nation and many foreign competitors will compete this year at the CAAFTC held at the Rochester Brooks Int’l Skeet and Trap Club.
Upstate New York heats up in the summer with the largest field target event in the country — the Crosman All-American Field Target Championship (CAAFTC). This very popular airgun event takes place June 21-23, 2019 in upstate New Yorkat the Rochester Brooks International Skeet and Trap Club in Rush, New York. 0ver 100 air rifle and air pistol competitors will participate in the big event hosted by Crosman. This event attracts top Airgunners from across the nation (and some foreign countries). Along with regular Field Target matches, there will be specialty side matches, plus a factory tour. The event is free to the public.If you are a Field Target Shooter and want to attend, don’t hesitate — registration closes soon.
After getting squared away with check-in and some practice rounds on Friday, take part in the pistol match and the Quigley Bucket Challenge (see video below). For the Quigley Bucket Challenge, competitors must try to hit a 1.75″ target from 55 yards away, using open sights (no scopes).
The three-day competition features multiple shooting matches including the main two-day rifle event. There are four divisions for competitors: Open, Hunter, WFTF, and Pistol. In addition to the main rifle event, this year will also feature a pistol match, the Quigley Bucket Match and the Pyramyd Air Gunslinger match. The Bucket match re-creates famous scene in the movie Quigley Down Under in which the lead character shoots a bucket at 700 yards. Here the distances are scaled down a wee bit (wink). Competitors, using iron sights only, get 5 shots at a 1.75″ bucket placed at 55 yards.
Tech Talk: Why the Big Side-Wheels on the Scopes?
Field Target rifles shoot pellets propelled by compressed air. These light-weight, low-BC projectiles drop very quickly, with a looping trajectory. In order to hit targets at distances out to 50 yards or so, you have to adjust your scope to compensate for pellet drop. But you can’t set the scope correctly without knowing the precise range to the target. This is the function of the big wheels on the side of the scope. Field Target Competitors use the parallax adjustment on high-magnification scopes to determine target range. The big wheel allows quick, yet precise parallax adjustment. Markings on the wheel show the shooter the scope settings required for the distance “dialed-in” via the over-size parallax wheel.
The CAAFTC is sanctioned by the American Airgun Field Target Association and is a featured AAFTA Grand Prix event. The 120-shot match has competitive rifle divisions based on allowable gun and support equipment. Here are the main air rifle classifications:
Hunter Division – rifle fires at a maximum 20 foot pounds of energy (FPE), shooter may use a non-attached bipod, non-restrictive clothing, and sitting stool. Open Division - maximum 20 FPE maximum rifle, shooter may wear a body harness, no bipod, 6″ maximum height seat. World Field Target Federation (WFTF) – similar to Open but shooters compete according to international standard of maximum 12 fpe for rifles. Freestyle Division – 20 FPE maximum rifle, no other restrictions. (This is new for 2016).
The pistol competition includes similar divisions based on shooting styles. Both rifle and pistol divisions include sub-classes based on the air rifle powerplant: piston driven or pre-charged pneumatic.
“If you want to see some of the country’s finest airgun shooters, this is the hottest event of the summer and it’s free for the public,” says Chip Hunnicutt, Marketing Manager for Crosman. “Alongside the world-class shooters, we’ll have enthusiasts simply having a good time and even parents bringing their kids for some good fun outdoors.” (NOTE: Click framed images below to zoom.)
Father’s Day is Sunday, June 16, 2019, so now’s the time to shop for a great gift for the “Old Man”. If your father enjoys the shooting sports and hunting, here are some recommended items. There are a couple items for home use as well. All selections cost less than $100.00. If you have an Amazon Prime membership, you can get two-day shipping in most areas of the country.
TEN Great Father’s Day Gifts for Dad Under $100.00
Protect Dad’s hearing — Howard Leight Impact Pro Electronic Muffs offer an impressive 30 dB Noise Reduction Rating (NRR). These high-tech muffs provide sound protection with the ability to still hear conversations and range commands. They also offer Headphone Functionality so Dad can listen to music.
Lyman’s new Ideal compact press works great as a second, lighter-duty press. It also is a good choice for loading at the range. It can easily be mounted to a bench with C-Clamps. This cast-iron press is stronger than other presses in its price class. The Lyman Ideal costs just $79.99 at Midsouth Shooters Supply.
The Fospower Battery Pack can charge your smartphone, tablet, and other USB-compatible devices. This is a great as a backup power source for a LabRadar chrono, or if you are using a tablet to monitor a TargetCam. Waterproof and shockproof, the rugged Fospower unit is built for outdoor use. On sale at Amazon.com for $24.99, this 10200 mAh Power Bank has been popular with our Forum members.
Plano’s AirGlide case is a unique, top-loading rifle case. Ideal for benchrest guns with wide forearms, the AirGlide case puts no side-pressure on scopes. We like the ease of loading. This fits rifles with barrel up to about 28″ max.
We’ve used Bog-Pod shooting supports on varmint hunts. They’re great for down-angle shots from a ridge or kneeling shots to get above terrain obstacles. Bog-Pods adjust from 17″ to 39″.
This Columbia Bahama II guide shirt is durable and comfortable. More importantly it provides UPF 30 protection from the sun’s damaging rays. The added cape over the shoulder area provides extra protection for shooters in the prone position. This is offered in 17 colors in breathable nylon. This is popular for fishing, sailing, hiking and other outdoors sports.
The versatile MTM Range Box includes cradles so you can do gun maintenance while at the range. A lift-out tray holds small items such as patches and jags. This is a durable product that can hold ammo and other gear.
Walkie-Talkies are “must-have” items for long-range shooting. The 22-CH Motorola T100 Two-Way Radio is an Amazon Favorite in FRS/GMRS Handheld Radios.
If you’re like most guys, you’re constantly looking for your smartphone and keys in the house. “Where’d I put it now?” we ask all too often. With this convenient Phone, Wallet, and Watch Station from Amazon, “Pops” can keep his most important items all in one place. This handy stand can also serve as a phone charging station.
This cleverly-designed Shotshell thermos will make Dad smile. Styled just like a 12ga shotgun shell, the Stansport thermal bottle holds 25 oz. of hot or cold liquids.
The circular orange cutting fixture on Erik’s Milling Machine is a Don Nielson “Pumpkin” neck-turning tool. Don designed this tool to be used by hand or with power. The Pumpkin boasts an eccentric mandrel that allows the cut to be adjusted easily in precise .0001″ increments. Benchresters like this as it allows for very precise control of cut depth and neck-wall thickness. 
Upstate New York heats up in the summer with the largest field target event in the country — the Crosman All-American Field Target Championship (CAAFTC). This very popular airgun event takes place June 21-23, 2019 in upstate New Yorkat the Rochester Brooks International Skeet and Trap Club in Rush, New York. 0ver 100 air rifle and air pistol competitors will participate in the big event hosted by Crosman. This event attracts top Airgunners from across the nation (and some foreign countries). Along with regular Field Target matches, there will be specialty side matches, plus a factory tour. The event is free to the public.If you are a Field Target Shooter and want to attend, don’t hesitate — registration closes soon.
