Could you hit an 18″ x 24″ target at a distance of 435 yards (roughly 400 meters)? Sure, you’re thinking, that would be easy with a good rifle fired from the bench or prone position. OK, now think about making that shot, OFF-HAND with a pistol. That’s something entirely different. We doubt many marksman would wager they could hit a plate 400 meters away with a handgun.
That’s exactly the challenge legendary shooter Jerry Miculek undertakes in this interesting video. Shooting a Smith & Wesson 9mm M&P pistol with a red-dot optic, Jerry makes the 400m shot look easy, hitting the steel plate with his first shot. This takes good eyes, a solid grip, perfect trigger control (and a bit of luck). Jerry was shooting 115gr Hornady HAP® ammunition.
25 Feet Hold-over to Make Shot at 435 yards
The shot wasn’t dead center, but Miculek still hit the steel plate on the first try. This is doubly impressive because Miculek had to hold well over the target. In fact Jerry figured he was aiming “25 feet over [the target]”. The lesson to be learned here is that a good pistol, in the hands of a master, may be capable of astonishing long-range accuracy — as long as you work out the ballistics in advance. Jerry knew that he had to hold high to arc the bullet into the target.
This story, from our Gun of the Week Archives, offers a good intro to the 30 BR cartridge, which is still the leading chambering for short-range Score Benchrest.
What’s better than one custom-built 30 BR with gorgeous wood and top-shelf components? A matching pair of course. Just ask Australian shooter Greg Roche (“Caduceus” in our Forum). A decade ago, Greg spent two years living and working in the USA. While in America, he commissioned two matched custom rifles to bring back to Australia for Hunter Class BR matches. Though the look-alike rigs are both chambered in 30 BR, one is designed for the Australian “Traditional” centerfire Hunter Class (10-lb limit), while the other is purpose-built for the “Custom” centerfire Hunter Class (14-lb limit). The 10-lb Traditional rifle features a fully-functioning two-round magazine and a 6-power scope. In contrast the Custom Class rifle is a single-shot action, with a 45X Leupold scope. The Custom weighs 13.5 pounds so it can also be used in traditional Heavy Varmint Benchrest matches if desired.
Tale of Two Rifles Story and Photos by Greg Roche (“Caduceus”)
The USA boasts some of the finest precision rifle-builders and Benchrest parts suppliers in the world. Before returning to Australia after two years in the States, I decided to have two special BR rifles built using American components and skilled labor. I wanted a matched pair–twin guns that would be as handsome as they were accurate. The heavier gun of the pair, the 13.5-lb Custom Class rifle, features top-of-the-line (but well-proven) technologies and components. With the 10.5-lb Traditional Class rifle, we had to develop new solutions to allow the 30 BR cartridge to feed from a functional two-round magazine. Here is my saga of how my twin 30 BRs were conceived and built, and how they have performed in competition.
BACKGROUND — The 30 BR for Score Competition
The 30 BR is a wildcat cartridge based on a necked-up version of the 6mmBR Norma case. It originated in U.S. Benchrest circles where it found its niche in Varmint For Score (VFS) matches. Unlike traditional Benchrest, where group size determines the winner, VFS matches are shot on a target with multiple, concentric-ringed bullseyes. Point total is based on “best edge” shot location (one shot per bull). In score competition, the 30 BR’s “supersized” .308-diameter hole offers an advantage over the 6mm hole created by a 6 PPC, the dominant group BR chambering.
The starting point for loading the 30 BR wildcat is Lapua 6mmBR brass. These are necked up as a single-step operation using a .30 caliber tapered expander ball (or dedicated expander mandrel). This will leave a bulge in the neck, so the expanded case neck is normally turned to bring the thickness down to the correct dimension for the chamber. I turned these necks down to .010″ wall thickness using a Stiller neck-turning tool. It features an eccentric mandrel similar to the Nielson “Pumpkin”. Loaded rounds measure .328″ neck diameter. This gives minimum clearance in my .330″ neck chamber, so very little neck resizing is needed after firing. Cases are trimmed to 1.500″ prior to turning to ensure consistency since the Stiller tool indexes the length of cut off the case mouth. Other than that, cases are just chamfered, loaded and made ready to shoot. No special fire-forming is required.
17-Twist Barrels for Both Rifles
Texan gunsmith Mike Bryant chambered both barrels. Mike also polished both barrels to a high-gloss to match the receivers. In this game, barrels are consumables, much like powder and primers, so most owners wouldn’t bother to polish their barrels. However a 30 BR barrel can provide up to 5000 rounds of accurate life (unlike a 6PPC barrel which might be tossed after 800-1000 rounds.) So, these barrels are likely to be on the rifles for many seasons. Given the high-gloss finish of the Grizzly actions and the beauty of the Red Cedar stocks, it would have been an injustice to leave a dull finish on the barrels.
The chambers were both cut with the same reamer supplied by Dave Kiff of Pacific Tool and Gauge. Randy Robinett, one of the originators of the 30 BR wildcat, specified the reamer dimensions. Randy’s 118gr, 10-ogive custom BIB bullets and the 30 BR cartridge enjoy a winning track record in the USA. The 30 BR Robinette reamer has zero free-bore and a .330″ neck, and is optimized for the BIB 118s. The bullets perform best when seated far enough out to jam firmly into the rifling as the bolt is closed. The long ogive means the bullet’s bearing surface is very short.
Slow Twists for Maximum Accuracy
You may note the unusually slow twist rate of both barrels. In most .30-caliber chamberings, the barrel twist rate is 1:11 or 1:12 to stabilize 150gr to 200gr bullets. The 30 BR is optimized for 115gr to 118gr flat-base bullets and 1:17 provides sufficient stability at muzzle velocities around 2900-3000 fps. In competitive Benchrest, where every thousandth of an inch counts, over-stabilization of projectiles can hurt accuracy, so “just stable enough” is the goal; hence the 1:17 twist.
Case Forming, Case Prep, and Reloading Methods
A Sinclair case neck micrometer indicates neck thickness of 0.010″ after neck turning.
30 BR dies are readily available from a number of manufacturers. I personally use Wilson neck and seating dies with a Sinclair Arbor press, but Redding and Forster both supply high-quality threaded dies for use in a conventional press. For under $100.00 US, custom full-length dies can be obtained from Hornady and CH Tool & Die by sending them reamer prints or a couple of fired cases. Harrell’s Precision offers “semi-custom” dies. Just send them some fired cases and they select a pre-made CNC-cut die that ideally fits your chamber. You can ask the Harrell brothers for a die that’s tighter at the shoulder or base, or otherwise customized to your preferences.
Load Development and Accuracy Testing
With cases formed and bullets selected, load development is simply a matter of choosing the right primer, powder and charge weight, and loading the most consistent ammunition possible. The Lapua BR cases use a small rifle primer. The choice here was Federal 205 Match primers vs. CCI BR4 Benchrest primers. Some shooters have also had success using CCI 450 Magnum primers but it is very unlikely the small case needs this much spark to light off regular extruded powders. In my case, I selected Federal primers because availability tends to be better in Australia.
The relatively large bore-to-capacity ratio of the 30 BR case means that fast burning powders are the order of the day. Once again, US experience suggests H4198 (the Hodgdon equivalent of ADI AR2207) is the choice of match winners. The fact that H4198/AR2207 is an Australian-made product is an added bonus. So, I loaded up test rounds with AR2207 from 32.5 grains to 35.0 grains in approximately 0.3 grain increments. All bullets were seated to jam +0.010″ into the lands. This places the bullet base about two-thirds of the way down the neck and well short of the neck-shoulder junction.
Scary stuff — AK-74 after firing corrosive ammo and not being cleaned for a week.
Image courtesy ADCOFirearms.com.
No doubt you’ve heard the term “corrosive” used with respect to ammunition. But what exactly is “corrosive ammunition” (and how does it different from non-corrosive ammo)? What is the chemistry that leads to corrosion, and what cleaning procedures should you follow if you shoot corrosive ammunition? Brownells has come up with answers to these and other questions in a helpful TECH TIP video about corrosive ammo.
In this informative video, Brownells gun tech Steve Ostrem explains the primer-related chemistry that makes some ammo corrosive. The video then reviews suggested cleaning procedures you should follow after you have fired corrosive ammo through any firearms.
What Is “Corrosive” Ammunition?
What makes ammo “corrosive”? Generally speaking, primers are the problem. When corrosive ammunition is fired, the ignited primers leave a residue of corrosive salts. Typically these primers contain potassium chlorate, or sodium petrochlorate which, when burned, change into potassium chloride or sodium chloride. Sodium chloride is also known as common table salt.
Potassium chloride and sodium chloride are both very hygroscopic (i.e. they attract water). Because of that, these alkalis are rust generators. When exposed to the hydrogen and oxygen in the air (and moisture) potassium chloride and sodium chloride can form an acid that quickly causes metal rifle parts to rust and pit.
Given a choice, you may wish to avoid corrosive ammo altogether. However, for some types of fire-arms, particularly older military-style rifles, the most affordable ammunition may be corrosive. If you choose to use corrosive ammo, it is important to clean the gun thoroughly after use. After firing, you want to use an element that will neutralize the primer salts. Brownells suggests a water soak (see video above). Alternatively, Windex with ammonia can help neutralize the salts, but that doesn’t finish the job. After the salts have been neutralized and flushed away, basic anti-corrosion protectant (such as Eezox or other gun oil) should be applied to all metal parts.
This video ahows the effects of Corrosive Ammo after one month without cleaning:
To learn more about the proper procedures for cleaning rifles exposed to corrosive ammo, we suggest an article by Paul Markel on Ammoland.com. Markel, host of the popular Student of the Gun TV series, states that: “Windex (with ammonia) is the Corrosive Ammo shooter’s best friend. After you are done shooting your corrosive ammunition for the day, squirt the window cleaner liberally from the chamber down the barrel. Pull the bolt / bolt carrier / op rod if there is one and douse them as well. A couple of old cotton t-shirts will come in handy. A cotton barrel swab is a nice accessory but you can make do with patches. Some folks will rinse all of the ammonia and loosened corrosive salts off with hot water. Others prefer to wipe it all down and let the ammonia evaporate. Either way, once the corrosive salts have been tackled with the window cleaner, it is time for an all-purpose brush (old toothbrush) and some gun oil.” READ Full Article by Paul Markel.
Video Tip from EdLongrange. We welcome reader submissions.
How would you like to represent the United States in top-level International Shooting competitions? Well, if F-Class is your game, here is your opportunity. F-Class Team USA will be conducting try-outs for the United States squads who will represent our country in F-TR and F-Open divisions (plus Under-25) at the 2021 World Championships. The try-outs are open to any competitive shooter with a class-compliant rifle and the will to win. Team leadership expressly welcomes newcomers.
Initial and primary tryouts are planned during the 2018 U.S. National Championships in Raton, NM, and the 2019 SW Nationals in Phoenix, AZ. There may also be an early 2019 tryout date at Butner, NC.
Dan Bramley Invites Shooters to Team USA F-Class Try-Outs
Official Invitation to Team USA F-Class Try-Outs To the F-Class Community–
On behalf of Team USA 2021, we are pleased to invite the best of USA F-class to consider joining our effort for the 2021 World Championships in Bloemfontein, South Africa. We are reaching out with this invitation to provide some general information on our plans for 2021 and for upcoming try-out dates for the unified Team USA: F-TR, F-Open, and Under 25.
We are moving forward with F-Open, F-TR, and Under 25 unified as one USA F-class 2021 Team. This will allow us to take advantage of each team’s strengths and provide needed purchasing power and coordination for event and logistic costs. We also believe this will help encourage and grow our sport. We will share ideas, event/facility dates and best practices within this unified team, however, individual team segments will make their own decisions. Therefore, please direct your responses and inquiries to the appropriate team leadership.
Being part of Team USA is a major commitment of time and resources. We do have wonderful and sizable sponsorship partners who we thank and rely on for moderating individual team member costs. However, due to the location of this World Championship effort, one can expect to help cover a commensurate level of the costs.
We are now moving into the USA “development team” stage of the process. This team is open to newcomers… there are many newer names showing up on the top of leader-boards and many new teams that are making positive impacts. If you are interested in being part of Team USA, please consider making that commitment. We would like to hear from you by March 23, 2018.
Team Time Expectations
Attendance at SWN and US Nationals will be expected for 2019 and 2020. We will also likely expect the final team to attend the Berger SWN in 2021 or have an alternative site for a final practice prior to our trip. We will try to have afternoon or evening team sessions during these events however we may have team days just prior or after these events to maximize the use of individual travel dollars and time. We will also likely have additional team training dates in 2019 and 2020, likely on east coast ranges to facilitate best availability for all.
Shooting/Coaching Position Opportunities
We are equally passionate about developing coaching/shooting teams for winning gold medal efforts in both the Richardson Cup (8-man) and Rutland Cup (4-man) World Championship Events. Obtaining a shooting or coaching spot on one of these teams is an absolute gauntlet of a commitment and consistent strong results will be required as the USA is blessed with wonderful depth. We encourage all, with proven success in our sport, to test themselves at this highest of levels.
Team Try-Out Dates and Locations
Initial and primary tryouts are planned during the 2018 US National Championships in Raton, NM and the 2019 SW Nationals in Phoenix, AZ. There may also be an early 2019 tryout date at Butner, NC.
If you are interested in further information, please contact our Team USA leadership:
Dan Bramley, Captain USA F-Open
usrifleteam2021fopen [at] gmail.com
Phil Kelley, Jr., Captain USA F-TR
usarifle2021 [at] gmail.com
Rick Jensen, Captain USA U25
U25USAFclass [at] gmail.com
There were some interesting new Euro-Rimfires on display at SHOT Show 2018. We were impressed with the new Tikka T1x along with the handsome Steyr Zephyr II. Both these rifles are offered in .22 LR and .17 HMR rimfire chamberings, and the Zephyr comes in .22 WMR as well. Our friends at Varminter.com have created preview videos showcasing the notable features of these new rifles. We hope to test one of these Tikkas this spring — one great feature is the action has the same footprint as the Tikka T3/T3X centerfire rifles. That means you can drop the rimfire barreled action into any stock that fits a T3 or T3X.
Tikka T1x MTR Rimfire Rifle (.17 HMR, .22 LR)
Varminter.com Reports:
Tikka has built a reputation for offering quality firearms, for an affordable price. Up until now, they have focused on the centerfire platform. However, they are now entering the rimfire market with the new Tikka T1x MTR rimfire rifle. This rifle is loaded with everything we love about Tikka’s T3 centerfire rifles, in a rimfire. Unique to the T1x is the ability to place the barreled action into one of their T3, or new T3x, rifles. This truly gives this rimfire a centerfire feel, in the calibers we love (.22 Long Rifle and .17HMR).
Linked above is Varminter.com’s video with Miikka Tammlnen from SAKO in Finland from the floor of the 2018 SHOT Show, where he discusses this new rifle in length. READ Varminter.com Review.
Steyr Arms showed off a handsome rimfire rig at SHOT Show. The Zephyr II sports a handsome walnut stock with good ergonomics and nice checkering on grip and fore-end. This is not an inexpensive rifle — MSRP is $995. The .22 LR version is shipping now, and other the .22 WMR and .17 HMR versions should be available before summer. The rifle is trim and easy to carry — overall length is 39.2″ (with 19.7″ barrel) and the rifle weighs just 5.8 pounds without scope. You’ll find more product photos on Guns.com.
Varminter.com has prepared a preview video highlighting features of this attractgive rimfire varmint rig. View the video below. For more details read the FULL Varminter.com Review.
Product description from Steyr Arms
The Steyr Mannlicher Zephyr II is the rebirth of the original Zephyr rifle, which was produced from 1955 through 1971. This new rifle features a classic European walnut stock with a Bavarian cheek piece and fish-scale checkering. The Zephyr II has a tang safety, detachable 5-round box magazine, and comes with a threaded barrel option for all calibers. The cold hammer forged barrel with Mannox finish make for tough, reliable design that will withstand the elements while out in the field. This lightweight bolt-action, is available in .17 HMR, .22 LR, and .22 WMR.
Chamberings: 17 HMR , 22 Long Rifle, 22 WMR
Magazine: 5 Round, Detachable
Stock: European walnut with fish scale pattern
We know many of you guys have a Forster case trimmer (hand lathe) sitting on your reloading bench. This tool does a good job of trimming cases to length. But did you know that an inexpensive accessory will allow your Forster case trimmer to chamfer while it cuts? Here’s the skinny on the 3-way head for the Forster case trimmer.
Tool Cuts Brass to Length, and Chamfers Inside and Outside
Forster’s 3-in-1 Carbide Case Mouth Cutter works with all existing Forster case trimmers. This unit does three jobs at the same time. It trims the case to length, it puts a 14-degree chamfer on the INSIDE of the neck, AND (last but not least), it cuts a 30-degree chamfer on the OUTSIDE of the neck. It does this all quickly and efficiently — in a matter of a few seconds. We tested the new tool ourselves on a few cases. The tool is solid and well made. The carbide cutting tips do perform a very clean cut. Be aware, however, if you have turned your necks already, you may have to reset the blade positions before you start trimming your brass.
Forster’s CFO, Robert Ruch, demonstrates the 3-in-1 case trimming/chamfering tool in the video above. As you can see, the tool turns very smoothly (no chatter). The actual cutting time, per case, is just a few seconds. The tool has an MSRP of $88.00, but it sells for around $65.00 to $70.00 at major vendors. Forster’s 3-in-1 Carbide cutting tool works with all existing Forster case trimmers and other hand lathes with a .490″ shaft diameter. The unit fits over the cutter shaft and secures with one set screw. The 3-in-1 cutter is available for five (5) calibers: .224, .243 (6mm), .264 (6.5mm), .284 (7mm), and .308.
Wouldn’t it be cool if you could record what you see through your riflescope, without interfering with the normal view through the eyepiece (ocular)? That is now possible with a new, scope-mounted accessory from Phone Skope. The new Skoped Vision Adapter ($149.95 MSRP) holds your smart-phone on the right side of the riflescope. The “shooter’s eye view” through the scope ocular is NOT obstructed. This way you can video a hunt, or a target shooting session. Watch this video to see how it works.
Ed Mobley of 65Guys.com checked out the new Skoped Vision riflescope adapter at SHOT Show. In this 6.5 Guys video, the Skoped Vision product feature starts at the 1:50 time-mark:
Ed asked the Phone Skope Sales Rep about recoil and G-forces. No one wants to harm an expensive smart-phone. The Sale Rep said that today’s smart-phones are pretty tough, so no problems have been encountered: “We have tested on 7mm, .300 Win Mag. We haven’t had any issues with recoil or damage to the phone. So it looks very promising.”
The Skoped Vision riflescope adapter should be available by early summer 2018. Phone Skope says the adapter will sell for $149.95. The Skoped Vision adapter mates with a regular Phone Skope smart-phone holder which costs about $50.00. So your total price will be roughly $200.00.
This safe has a simple, combination dial lock. While slower to open, mechanical dial locks are more trouble-free than battery-powered keypad locking systems.
This is the best deal we’ve seen in a long time on a medium-sized, fire-resistant gun safe. If you don’t have a decent safe yet, this is a very good value. You get a 24-gun, fire-rated safe delivered to your doorstep for $459.00. No extra shipping charge. Hard to beat that. This safe usually costs over $675.00. It measures 55″ tall x 29.25″ wide x 20.25″ deep. Weight is 418 pounds. While that’s heavy enough to deter a “smash and grab”, we strongly recommend you bolt the safe in place.
Word to Wise about Rated Capacity
While this safe is rated for 24 long guns up to 54″ tall, realistically you can store 10-12 scoped rifles comfortably. You can also split the interior, using the provided shelves. Put rifles on one side and other valuables (cameras, jewelry, electronics, photo albums) on the other side.
Stack-On 24 Gun Fire Resistant Safe — Product Description
With a combination lock that is reinforced with a steel plate, this hunter green gun security safe ensures that your guns will stay securely locked up. The gun safe with combination lock has been tested and is verified to be fire-resistant for 30 minutes up to 1400 degrees Fahrenheit. The door stripping on the safe expands when exposed to high temperatures, sealing the contents inside from harm during a fire. The Stack-On 24 Gun Fire Resistant Safe has reinforced steel doors that are filled with fire retardant material, creating a protective firewall. This gun security safe has 2-way locking 1″ steel live action locking bolts and up to 5 locking points. Inside, the gun security safe is fully carpeted with 4 adjustable shelves to give you ample storage space. This durable Stack-On Gun Fire Resistant Safe is especially designed to resist deterioration and compression over time.
Delivery Information
This item is shipped via a freight trucking service. The company will call you to schedule a delivery appointment, so ensure someone is home at the scheduled delivery time. Please note that this item is available for curbside delivery only, and will not be moved into your home or garage. We recommend you have help available to move the item to its final location. Safe Weight is 418 pounds. That requires a pretty sturdy dolly.
Dick’s Sporting Goods, a major sporting goods retail chain, will stop selling AR-platform rifles, and require a minimum age of 21 years to purchase ANY and all firearms, not just handguns. In addition, the company will stop selling “high-capacity magazines”. The Chairman/CEO of Dick’s Sporting Goods, Edward W. Stack, announced these new policies yesterday (2/27/2018), while appearing on the Good Morning America TV show. Stack said the ban would begin immediately, with ARs and other mag-fed semi-automatic rifles being removed from all Dick’s stores (and deleted from the company’s website).
The action was prompted by the recent school shooting in Parkland, Florida. Stack stated: “As we looked at what happened in Parkland, we were so disturbed and saddened by what happened we felt we really needed to do something. When that happened we realized … we did everything by the book. We did everything that the law required, and he was still able to buy a gun. And when we looked at that, we said the systems that are in place across the board just aren’t effective enough to keep us from selling someone a gun like that.” Notably, Stack revealed that Nikolas Cruz, the Florida school shooter, had purchased a shotgun from Dick’s last year (however, that shotgun was NOT used in the shooting).
Dick’s Sporting Goods will no longer sell AR-platform rifles and other similar, semi-auto, mag-fed rifles. It is unclear if other, more traditional semi-auto centerfire rifles will still be sold.
Stack also urged elected officials to enact “common sense gun reform” by banning “assault-style” firearms (his terminology, not ours); raising the minimum age to purchase all firearms to 21; banning high-capacity magazines; banning bump stocks; and requiring more complete universal background checks that include relevant mental health information and previous interactions with law enforcement. Stack also hopes that a universal database of those banned from buying firearms is created, and that private sales without background checks are disallowed. (Source: IndyStar.com)
Previously, in late 2012, Dick’s removed semi-auto AR/AK-type rifles from its main retail stores in response to the school shooting at Sandy Hook. However, after a few months, sales of ARs and similar rifles resumed at Field & Stream stores operated by Dick’s.
There will be no going back this time, Stack said, emphasizing that the policy changes will be permanent. In an open letter, Stack announced: “We support and respect the Second Amendment, and we recognize and appreciate that the vast majority of gun owners in this country are responsible, law-abiding citizens. But we have to help solve the problem that’s in front of us.”
What do you think about this action by Dick’s Sporting Goods? You can express your views by clicking the Post Comment link below…
Do you have a smart idea for a new shooting-related product? Or have you figured out how to improve/enhance a popular item already on the market? If so, Creedmoor Sports wants your product ideas. Creedmoor Sports invites its customers to conceive the next great Creedmoor Sports product. Many of Creedmoor’s most creative ideas come from shooters who are out using products every day and know how to make them better. That’s why Creedmoor Sports wants to hear from you. You can email your ideas to: shoot [at] creedmoorsports.com.
Dennis DeMille, Creedmoor’s V.P. of Operations, tells us: “We love it when a customer calls or emails us with an idea. If the idea has merit we will immediately try to put it into play. If a soft-good (such as clothing) we try to take it from idea to sample within a couple days. The idea is walked back to our designer, it’s cut and sewn on the spot in our Anniston, Alabama facility and we start testing. If a hard-good (such as a metal product), we start designing the product on our mill and lathe and see what it would take to bring to market.”
Success Stories of Customer-Inspired Products
Creedmoor Sports products based on customer “bright ideas” have included the handy Scope Kennel. Made with a top strap for easy rifle carry, it serves to protect a rifle scope.
Another customer-suggested product is Creedmoor’s Quad-Fold Shooting Mat. This thickly-padded mat provides a comfortable, stable base for elbows and knees. When folded, it measures just 2.5″ x 19″ x 29″. The new Bench and Field Shooting Mat is another customer-inspired product. This unique mat is designed to work both on the ground and on a shooting bench. Check it out HERE.
NEW! First-Ever Reloading Catalog from Creedmoor Sports (Print and Digital)
Just this week, Creedmoor Sports released its first-ever Reloading Catalog. Equipment lines include Redding, Forster, L.E. Wilson, Hornady, RCBS and many more. Many additional component suppliers have been either added or enhanced including Berger, Lapua, Sierra, Hornady, and Nosler.
“We get calls and emails every day asking us to carry more reloading supplies. We decided it was time to make the investment into adding equipment that our customers demand. We didn’t want to jump into the reloading game without extensive research on what brands and philosophy that would set us apart from larger suppliers. We feel our mix of equipment, components and technical will satisfy everyone from the beginner to the expert.” Says Greg Kantorovich, President, Creedmoor Sports.
About Creedmoor Sports
Creedmoor Sports has been serving the competition/precision rifle shooting community since 1979 — nearly four decades. Creedmoor Sport’s key mission has been to supply great products that help shooters win at every level of competition. For more information, visit CreedmoorSports.com and the Creedmoor Sports Facebook page. Also check out the Creedmoor INFOZone for helpful Video Tips on shooting and reloading.
30 BR dies are readily available from a number of manufacturers. I personally use Wilson neck and seating dies with a Sinclair Arbor press, but Redding and Forster both supply high-quality threaded dies for use in a conventional press. For under $100.00 US, custom full-length dies can be obtained from 
No doubt you’ve heard the term “corrosive” used with respect to ammunition. But what exactly is “corrosive ammunition” (and how does it different from non-corrosive ammo)? What is the chemistry that leads to corrosion, and what cleaning procedures should you follow if you shoot corrosive ammunition? Brownells has come up with answers to these and other questions in a helpful TECH TIP video about corrosive ammo.
Being part of Team USA is a major commitment of time and resources. We do have wonderful and sizable sponsorship partners who we thank and rely on for moderating individual team member costs. However, due to the location of this World Championship effort, one can expect to help cover a commensurate level of the costs.
