Competitive shooting is one of the few sports where people with physical disabilities and handicaps can compete side-by-side with their able-bodied counterparts. The NRA’s Disabled Shooting Services Program helps disabled shooters participate in NRA rifle and pistol competitions. The NRA’s Special Authorization Card allows disabled competitors to shoot from a modified position or wheelchair based on the type of disability or handicap.
Jessi McClain, NRA Disabled Shooting Services Coordinator explains how allowances are made: “Physical limitations may prevent a shooter from getting into a certain position to compete. For example, a paraplegic person can’t shoot from the standing position, so [he] would use an adaptive shooting position to compete”.
To obtain a Special Authorization Card, competitors can download two forms online. The first is to be completed by the shooter, and the second by his/her doctor. Forms can then be sent to NRA Headquarters along with pictures of the modified shooting position and/or adaptive device being used to compete. The Manager of the specific shooting discipline (rifle, pistol, air gun, etc.) then reviews the request. If approved, a temporary card good for one year is issued. For juniors, Special Authorization Cards are issued for several years at a time so that re-evaluations can be completed as children’s bodies change.
The medical waiver application is fairly simple and consists of two documents. The first form, the Competitor Application, should be filled out by the shooter. The second document is a Medical Form that must be completed by the competitor’s physician.
Once received, the applications are reviewed by the NRA. After approving the application, the competitor will receive a card authorizing him/her to use the adapted position or equipment. The Authorization Card must be shown to the Match Director prior to the start of any competition.
More guns were sold on November 25, 2016 (Black Friday), than on any other day in the history of the United States (based on NICS numbers). According to the NRA Blog: “On Black Friday 2016, the FBI processed 185,713 background checks through their National Instant Criminal Background Check System, breaking last year’s record by about 400 checks. Leading up to November’s Presidential election, gun retailers nationwide reported record sales in the month of October.”
In fact 2016 has been a record-breaking year for U.S. gun sales so far. It looks like, if gun sales continue at the current pace, more guns will have been sold in 2016 than in any other year in American history. The question remains, will gun sales remain high with a Republican in the White House?
The continuing record-setting volume of gun sales after the November election surprised some experts, who opined that the Republican election victory would ease concerns about future gun control. Such fears certainly drove gun sales in the first three quarters of 2016 as most “experts” predicted that Hillary Clinton would be the next President, and that she would push for restrictive gun laws.
Fast and Furious — FBI Processes Three NICS Checks Per Second
On Black Friday 2016, NICS Background Check processing topped Black Friday 2015 when the previous single-day record of FBI-processed gun transactions was set. In fact, so many Americans lined up to purchase firearms on Black Friday 2016 that the FBI was processing three background checks every second.
Think about that — three gun sales per second. That’s triple the normal rate of gun sales. The website The Blaze reported: “The typical Black Friday boom in gun sales doubles the number of background checks handled by the FBI’s National Instant Criminal Background Check System (NICS), from one per second on an average day to two per second.” On Friday afternoon November 25th, that figure had reached three checks per second.
It’s December, time to decorate your Christmas tree with sparkling lights. Maybe you should do the same thing with your gun safe…
Few, if any, gun safes come with adequate factory-installed lighting. Even if you have overhead lamps in the room where your safe resides, you’ll still find that the inside of your safe is dark, making it difficult to find small items. By adding interior lighting to your gun safe, you’ll lessen the chance of “bumping and grinding” your precious firearms as you move them in and out of the safe.
Here is a simple, do-it-yourself project that costs very little money. String LED lighting is now available at low cost. Called “rope lights” or “string lights”, these are strings of LEDs in lengths of plastic tubing. Gunsafe vendors sell strings for up to $35.00 per coil, but you can buy the same products at discount chains for under $5.00. Brian J. from Virginia reports: “I just went to Wally World’s Christmas clearance section and picked up two strands of Rope Lights for $3.50 each!” He then installed the strings behind the shelves of his gunsafe, as you can see in the photos.
LED string lights draw very little electrical power and have a very long life-span so you can leave your Rope Lights running continuously in winter. In addition to illumination, LED strings will provide some warming of the air in the safe, which helps prevent rust by raising the dew point. We still recommend that you use a GoldenRod or similar warming unit, placed at the bottom of your safe, plus desiccant packs to actually absorb moisture.
As you can see, Rope Lights provide a great lighting solution that illuminates even the small dark corners of internal shelving units. Rope Lights are easy to install. Just string the lights behind your shelves. Most safes come with a pre-drilled hole in the bottom for a dehumidifier. Just slip your Rope Light power cord through this hole and plug it into the wall.
Gun Safe Buyers’ Guide
For more tips on how to illuminate your safe and protect its contents from rust and corrosion, read our Gun Safe Buyers’ Guide. The most comprehensive Gun Safe Resource on the web, this article covers a multitude of topics including lock selection (electronic vs. manual dial), fire-proofing, door hinge design, water-proofing, wall construction, rust prevention, handgun storage options, and gun safe installation.
Gun safe interior photos by Brian J., used with permission.
This Sunday, December 4, 2016, Tom Gresham’s GunTalk Radio will feature a discussion of suppressors, aka “silencers”, “cans”, or “sound moderators”. With firearms industry experts, Tom will discuss the current regulations for suppressors, as well as efforts to remove silencers from the list of NFA items requiring expensive tax stamps and cumbersome paperwork. With the Republican gains in the November election, there are renewed calls for changes in the laws regulating suppressors. In fact, many suppressor advocates say now is the time for sound moderators to be removed from NFA control altogether, so that suppressors could purchased “over the counter” just like scopes, slings, or other common shooting/hunting accessories.
How Suppressors Work — The Science of Silencers
Suppressors are a valuable accessory for general-purpose rifles, so we would like to see suppressors legal in all 50 states. In addition, we believe the USA should follow the lead of European nations which promote the use of sound suppressors for safety reasons. In most European countries, for example, you can purchase a suppressor easily. There are no difficult barriers to ownership, onerous background checks, or special taxes. The Europeans seem to understand that suppressors protect the hearing of shooters (and bystanders), while suppressor use also dramatically reduces “noise pollution” concerns for shooting ranges in urban/suburban areas. The Europeans also understand that sporting/hunting use of suppressors does NOT increase criminal or gang activity. It is time for the USA to adopt these more enlightened viewpoints.
About Tom Gresham’s GunTalk Radio:
In its 21st year of national syndication, Tom Gresham’s GunTalk radio show airs live on Sundays from 2:00 PM to 5:00 PM Eastern, and runs on more than 200 stations every week. Listen live on a radio station near you or via live streaming from one of GunTalk’s Syndicated Audio Stations. After airing live, all GunTalk Radio Shows can also be downloaded as podcasts.
Want a preview of the hot new products of 2017? Then check out the just-released December 2016 Digital Edition of Shooting Industry Magazine. This free, digital eZine contains a 25-page Product Showcase with dozens of new products — rifles, pistols, optics, reloading tools, hunting gear and more. The product showcase article reveals many new-for-2017 firearms, including new guns from Ruger, Springfield Armory, and Walther. Along with the product guide, the December issue includes a 4-page preview of SHOT Show 2017, coming up in January.
Shooting Industry Buyer’s Guide Lists Thousands of Companies
The December Edition of Shooting Industry Magazine also contains a very comprehensive Shooting Industry Buyer’s Guide, starting on page 80. This 80-page resource lists 2500+ companies, complete with address, phone number(s), email, and website link. All the major precision shooting suppliers, such as Berger Bullets, Lapua, Hodgdon, McMillan, Nightforce, Redding, Sierra etc. are listed. In addition, you’ll find an easy-to-search, stream-lined version of the Buyers Guide at http://sibuyersguide.com/.
The Legal Brief is a feature of TheGuncollective.com that focuses on firearms rules and regulations. In this Legal Brief video, Attorney Adam Kraut explains key State and Federal regulations governing firearms, and explains how to ensure compliance with all applicable laws.
This five-minute video explains barrel length rules for rifles and shotguns, and also explains the best (and most fool-proof) methods to measure your barrel. In addition, the video explains how to measure firearm overall length. A rifle or shotgun which is less than 26 inches overall can also be classified as a “Short-barreled” rifle/shotgun subject to the NFA. NOTE: Under federal law “If the rifle or shotgun has a collapsible stock, the overall length is measured with the stock EXTENDED”.
Highlights of LEGAL BRIEF Discussion of Barrel Length and Firearm Overall Length
The ATF procedure to measure the length of a barrel is to measure from the closed bolt or breech face to the furthest end of the barrel or permanently attached muzzle device. ATF considers a muzzle device that has been permanently attached to be part of the barrel and therefore counts towards the length.
How to Measure Barrel Length: Drop [a] dowel or rod into the barrel until it touches the bolt or breech face, which has to be closed. Mark the outside of the rod at the end of the muzzle crown (if you don’t have a permanently attached muzzle device) or at the end of the muzzle device if it is permanently attached. Remove the rod and measure from the mark to the end of the rod. That is your barrel length[.]
Remember, if the barrel length is less than 16 inches, it is possible that the firearm could be a short barrel rifle (if you are building a rifle or it is already on a rifle) and if the barrel length is less than 18 inches, it is possible the firearm could be a short barrel shotgun (again if you are building a shotgun or it is already a shotgun). Both of these firearms would be subject to the purview of the National Firearms Act and would require the firearm to be registered accordingly.
How to Measure Overall Length:The overall length of your rifle or shotgun may also classify it as a Short Barrel Rifle or Short Barrel Shotgun. The overall length of a firearm is the distance between the muzzle of the barrel and the rearmost portion of the weapon measured on a line parallel to the axis of the bore. … If the rifle has a permanently attached muzzle device, that is part of the overall length. … If the rifle or shotgun has a collapsible stock, the overall length is measured with the stock extended.
Who wouldn’t like to save a cool hundred bucks, particularly on a BAT action? BAT Machine Co. in Idaho produces some of the most beautifully-machined, and smooth-running custom actions you can buy. There’s a reason so many world Benchrest and F-Class records have been set with BAT actions — they really are THAT good. The quality of machining, smoothness of bolt operation, precision of firing pin function, and general fit and finish are top-flight.
Right now you can SAVE $100.00 on all BAT Machine actions in stock at Bruno Shooters Supply. NOTE: This is a limited-time offer that applies to current, in-stock inventory only. All listed BAT action prices are a check or money order price. Any action purchased with a credit card will incur an additional 4% service fee. Moreover, there is an additional $40.00 for shipping per action, which must be shipped to a FFL dealer since the action itself is considered the “firearm” under Federal law.
The 6.5 Guys have been testing the bargain-priced Magnetospeed Sporter chronograph. This compact chrono offers great utility at an affordable price — you can buy the Sporter for under $180.00. Strapped on your barrel, the MagnetoSpeed Sporter records velocities accurately without requiring any hardware to be placed downrange. Everything is self-contained at your shooting station, so you no longer have to waste time setting up tripods and aligning the bullet path through old-fashioned chrono skyscreens.
Watch Video Review of MagnetoSpeed Sporter by the 6.5 Guys:
The 6.5 Guys give the MagnetoSpeed Sporter two thumbs up:
“Optical chronographs have been in use for decades but can be cumbersome to deploy and don’t work well in certain weather conditions. The folks at MagnetoSpeed have addressed these shortcomings with a completely different technology that is extremely compact, cost effective, convenient to use, insensitive to weather conditions and, best of all, accurate.
We’ve been using the MagnetoSpeed since V1 and the only reason we use our optical chronographs is for situations where we cannot hang the bayonet from the gun barrel. This is the most convenient, accurate, and portable chronograph system that we have come across. You’re also less likely to damage your MagnetoSpeed when compared to optical chronographs (which seem to attract bullets). There are also a number of useful accessories available. As discussed in the video, the XFR adapter and associated smartphone application allows users with MagnetoSpeed Sporter and V3 displays to download their current (un-archived) shot series to their Android or iOS device.”
CLICK HERE for MagnetoSpeed Sporter specifications and operating instructions.
MagnetoSpeed Sporter in Stock Now at Grafs.com for $179.99
Priced at just $179.99 at Grafs.com, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people, the Sporter model contains all the features they need. READ Magnetospeed Sporter Review.
Hodgdon Chief Executive Officer to Retire in One Year
How would you like to run one of the most respected firearms industry enterprises in the world? Well there will be a job opening at the top, the very top, in one year. Hodgdon Powder Company today announced the future retirement of Hodgdon Chief Executive Officer (CEO) Tom Shepherd. On December 31, 2017, Shepherd will retire from his current position and transition into his new role as Chairman of the Board of Directors of Hodgdon Powder Company.
“Tom has been our Chief Executive Officer for nearly 15 years, serving in this role since 2002,” said Bob Hodgdon, current Hodgdon Chairman of the Board. “In his tenure, Tom has lead us to record sales growth and positioned Hodgdon for the future. We have been working on this succession plan for some time now, and the entire Hodgdon family, the Hodgdon Board and all Hodgdon employees are excited for Tom as he prepares for the next stage of his career with Hodgdon.” Bob Hogdon and J.B. Hodgdon, sons of company founder Bruce Hodgdon, will continue to serve on the Hodgdon board.
As part of the succession planning process, Hodgdon is now moving forward with a search for a new Chief Executive Officer. This search will include both internal and external candidates and is expected to conclude by mid-year 2017.
About Hodgdon Powder Company
Established in 1947 by Bruce and Amy Hodgdon, today, sons Bob and J.B. have grown Hodgdon Powder Company into the largest US supplier of smokeless, blackpowder and blackpowder substitute propellants. The company distributes gunpowder under the Hodgdon®, IMR®, Winchester®, Goex® and VihtaVuori® brands.
Barnard makes great actions, many of which come complete with superb two-stage triggers. For a long-range competition rifle, a Barnard action is a very good choice. And now you can save up to $150.00 on Barnard Precision actions, complete with trigger. Our friend, 4-Time National Long-Range Champion John Whidden, decided to offer a special Holiday Promotion for shooters. A wide selection of Barnard actions have been discounted 10% (ten percent). This is a great opportunity to save money.
Whidden Gunworks has many Barnard actions on sale. These include repeater actions and actions that will fit large magnums — so there’s something for every application. John Whidden tells us: “As a part of this sale, Whidden Gunworks is offering $50 off barrel installations for any in-stock action sold. We have in-stock barrels from both Bartlein and Lilja. If you hurry, there is time to have your barrel installed on your new action by Christmas!”
This sale is limited to the models shown below and the inventory on hand:
Barnard Action Q & A with John Whidden
Q: In addition to the Model P, What Other Actions Does Barnard Produce?
Whidden: Many shooters familiar with the Barnard Model P, but we now carry six (6) other Barnard actions. These include the PC action with multiple bolt/port options, the Model SM repeater (with Rem 700 footprint), and the PLM which is a perfect fit for the big .338 Lapua Magnum cartridge.
Q: What Are the Key Features of Barnard Actions?
Whidden: Barnard actions have won a reputation for accuracy, robustness, and exceptional straightness and quality in manufacture. Their design is very rigid and stiff. The three-lug bolt gives a short bolt-lift. These qualities are available in the full line of of Barnard actions. The fact that many models include the excellent Barnard trigger make them a good value among custom actions.
Q: What Barnard Actions Do You Recommend for Particular Disciplines?
Whidden: For those interested in F-Class and Long Range Benchrest shooting styles the Model PC is very attractive. The PC is the same size and footprint as the familiar Model P except that the PC offers different bolt/port configurations. Available in the PC are right bolt/left port, left bolt/right port, and dual ports. The Model S and SM actions will accept Remington pattern triggers and fit into stocks inletted for the Rem 700. This gives PRS shooters the chance to have a superb action with a three-lug configuration for their use. The PL and PLM are sized for the .338 Lapua Magnum cartridge and wildcats based on that case-head size.
Competitive shooting is one of the few sports where people with physical disabilities and handicaps can compete side-by-side with their able-bodied counterparts. The NRA’s Disabled Shooting Services Program helps disabled shooters participate in NRA rifle and pistol competitions. The NRA’s Special Authorization Card allows disabled competitors to shoot from a modified position or wheelchair based on the type of disability or handicap.
Jessi McClain, NRA Disabled Shooting Services Coordinator explains how allowances are made: “Physical limitations may prevent a shooter from getting into a certain position to compete. For example, a paraplegic person can’t shoot from the standing position, so [he] would use an adaptive shooting position to compete”.
