If the battery on your safe’s electronic lock is more than a year old, or if it is not giving you the right voltage, replace it today!
This time of year, many readers are putting their guns away in a safe for the winter. It’s easy to just tuck the guns away and forget about them. But there’s something you should do before you shut the safe door.
If you have a safe with an electronic keypad, you should replace the battery every year as a precautionary measure. Trust us, you don’t want to come back in a few months and find that the keypad memory is kaput, and you’re locked out. That can lead to an expensive locksmith visit.
NOTE: Some lock systems use more power and you may need to change your batteries TWICE a year. Batteries aren’t that expensive — you may want to replace batteries TWICE a year if you open and close your safes very frequently.
Low Voltage Battery? You May Be Locked Out…
Here’s a true story. I have one safe with a Sargent & Greenleaf (S&G) keypad. A couple years back, in early December, I went to get into the safe. I punched in the correct combination, but all I got was a rapid “beep, beep, beep, beep” after I finished the last combination entry. I tried again to ensure I entered the combination correctly (I did). But again, the locking system responded with multiple rapid beeps indicating something was wrong. And the safe would not open. Now I was worried….
I popped out the battery holder (which slides in from the bottom of the keypad housing on the door). I removed the battery and tested it with a volt-meter. The 12-month-old Duracell 9-volt battery only registered 6.1 volts.
Low voltage was the problem. I went down to the store and got a couple new 9V batteries. I tested the new batteries and both measured 9.4 volts output. I slipped one of the new 9V batteries into the keypad housing, punched in the combination and everything worked OK again. Eureka.
Most electronic locks for safes WILL “remember” the combination for a period of time even when the battery is low (and the keypad’s “brain” should retain the combination when you remove the battery for replacement). However, a dead battery, or extended periods of low voltage can give you problems. Don’t rely on wishful thinking…
Smith & Wesson has announced a new Long Gun Holiday Rebate for 2025. Now through the end of December 2025, you can save $50 to $100 on popular rimfire and centerfire rifles including AR-type long guns, compact tactical rigs, and even a folding 9mm rifle.
From November 1, 2025, to December 31, 2025, customers who purchase a new eligible Smith & Wesson long gun will have the chance to receive a prepaid card valued at $50 for select M&P 15-22 rifles, $75 for select M&P FPC and S&W Response carbines, or $100 for select M&P15 and M&P10 models. Whether you’re looking for a reliable MSR platform, a pistol-caliber carbine to complement your 9mm sidearm, or even a new .22LR rifle for training, you can get a significant price reduction via this Holiday Prepaid Card offer.
This limited time offer allows purchasers to claim one prepaid card per each new qualifying Smith & Wesson firearm bought during the promotional period. To qualify, the firearm must be purchased and transferred through a FFL within the specified dates. This offer must be redeemed online. For more details on eligible firearms and the rebate process, Smith-Wesson.com/rebates.
Thanksgiving is just three weeks away. We know many of our readers will be traveling by air during Thanksgiving week, and during the Christmas holidays. This article reminds folks who travel to always comply 100% with rules. Don’t make an oversight that can land you in jail.
Handgun Transport During Flights — How to Do It Properly
It IS legal to take a handgun on an airline flight in checked baggage (if you follow the rules). But for goodness sake — declare the weapon as required by law and comply with all TSA and Federal regulations. Do NOT just toss your pistol in your carry-on and expect to board the plane. About 4,000 pistols were discovered in carry-on luggage in 2017. That can result in seizure and confiscation of the weapon, and just might land you in jail!
Gun writer Dean Weingarten has written an excellent article about handgun seizures at airports. Remarkably, in a single week a few years ago, 97 handguns were found in carry-on bags at U.S. airports.
TSA gives a list of the pistols found. The list shows the make, model and caliber of most of the pistols. There were 93 pistols where the caliber was identified.
9mm pistols were still the most common, with 36 represented. .380 pistols, known in Europe as 9X17, 9mm Kurtz, or 9mm Corto, were the next represented, with 24 present. That is 70 pistols, or 75% of the pistols found. There were a smattering of other calibers. There were eight .40 caliber pistols, seven .22 LR rimfire, six .45 caliber, five .32 caliber, four .38 caliber, one .410, and one .22 magnum.
Most of the pistols were semi-autos, there were a few revolvers, and three derringers.
How does this happen? It is the principle of rare occurrences. While an event may be extremely rare for each individual, if enough individuals are involved, the occurrence of rare events becomes a statistical certainty. About 4,000 pistols were discovered in carry-on luggage in 2017. There were about 770 million travelers passing through TSA checkpoints in that year. That is one pistol found for about 194,000 passengers. Each passenger presumably went through TSA checkpoints at least twice, once going, once returning. Some passengers go through multiple checkpoints, depending on the route taken.
I believe it happens in ways most people do not consider, because they are RARE. One way is to be distracted at a critical moment. Perhaps a business owner has made the decision to move a pistol from his briefcase to his locked desk [but then is distracted] and he has to rush to make his flight. The pistol remains in the briefcase and is discovered by the TSA.
The quality of the pistols found suggest most were taken from people who can legally carry them in most places. There are over 17 million people with carry permits in the United States. There are 13 states where no carry permit is required.
No one is perfect. Everyone makes mistakes. It is part of the human condition.
Another rare scenario is for a third party to put the pistol in the carry-on without the carrier knowing about it. In at least one case, this was done to a school student, maliciously. In that case, it was put in a teens’ backpack[.]
Some [handgun violations] occur because the traveler borrowed a piece of carry-on luggage, and missed a small pistol tucked into a dark recess of the luggage, where another family member kept it. I suspect that most pistols are discovered precisely because the carriers are NOT attempting to smuggle them.
Most of these errors are recognized as honest mistakes by the TSA. The TSA is not the end of the legal problems for a person who finds themselves in this situation. The biggest players are the states. How the situation is handled depends on where the situation occurs.
When traveling, check your carry-on twice. If you discover you have made a mistake, correct it.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
⏺️ » Build a good PRS/NRL rig (that can also hunt) for under $1000
Want to get started in PRS/NRL competition? Here’s an option that can get you a competitive tactical rifle for under $1050 out the door. Choose a Howa M1500 barreled action and a MDT XRS Chassis, both available from Brownells. These Howa 1500 actions have a smooth-running bolt and excellent 2-stage HACT trigger. Choose from a variety of PRS-suitable chamberings including 6mm ARC, .243 Win, 6.5 Creedmoor (and more). The 6.5 Creedmoor barreled action is $493.00 while the MDT chassis is $549.95 so your complete rifle price is just $1042.95. Brownells also has complete Howa-action hunting rifles chambered in .243 Win, .270 Win, 7mm-08, 7mm PRC, .308 Win, and .300 Win Mag. Get a complete hunting rifle for $499.99 to $599.99 — quite a bargain.
2. Midsouth — RCBS Explorer Reloading Kit 2, $329.99
⏺️ » Great price for everything you need — press, powder measure, scale etc.
For folks getting started with hand-loading, a great basic package is the RCBS Explorer Reloading Kit 2. On sale for $329.99 at Midsouth, this RCBS Package features pretty much all you need to load rifle and pistol ammo: Reloader Special 5 single-stage press, Uniflow-III Powder Measure, 1500gr digital scale, hand priming tool, powder funnel, powder trickler, hex key set, deburring tool, loading block, and Case Slick spray lube. You even get a Speer Reloading Manual.
3. Midsouth — Timney Trigger Sale for 30+ Action Types
⏺️ » Great deals on quality Timney triggers, save 10+%
Looking to upgrade the trigger on your competition, hunting, tactical, or varmint rifle? Right now you can get significant savings on Timney triggers for a huge variety of action types, both centerfire and rimfire. There are Timneys for Rem 700s (and clones), Win M70s, ARs, Tikkas, Rugers, Savages, Mausers and more. Save up to $32, with typical 10% discounts. There are many great choices for Rem 700/Rem Clone triggers and AR triggers. CLICK HERE to view all Timney triggers on sale.
4. MidwayUSA — Vortex Diamondback Spotting Scopes, 45% Off
⏺️ » Save 45% on good Vortex spotters, 20-60x60mm or 20-60x80mm
Vortex makes quality spotting scopes that offer fine optical performance for the price, with good sharpness and light transmission. Right now Vortex 20-60x60mm and 20-60x80mm Vortex spotting scopes are currently 45% OFF at MidwayUSA. Chose the 60mm version for mobile field use and the 80mm version if you need enhanced low-life performance. Both offer 60-power max magnification — good enough to see bullet holes at 500 yards (or beyond). The 60mm spotter is in stock now, with the 80mm arriving shortly.
5. Primary Arms — Howa TRAKR Rimfire Rifle, $169.99
⏺️ » Amazing low price on a versatile .22 LR rimfire rifle
Here’s a good .22 LR bolt-action rimfire rifle at an amazingly low price. The lightweight yet rugged Howa TRAKR .22 LR Bolt Action Rifle works for NRL22, target shooting, plinking, and small varmint shooting. The barrel is fitted with iron sights, and the action has scope ring mounts on top. The 1:16″-twist barrel measures 18″ long. The rugged synthetic stock has a Flat Dark Earth (FDE) weather-resistant exterior.
6. MidwayUSA — ZEISS Conquest V4 Scopes, 27-40% Off
⏺️ » Save $300+ on ZEISS V4 scopes, plus $150 Gift Certificate
ZEISS makes outstanding optics with great sharp glass and precise controls. Right now MidwayUSA has knocked over $300 off the price of each of two impressive ZEISS SFP scopes. For general hunting use, consider the ZEISS Conquest V4 3-12x44mm. For target work, competition, and long range varminting, we can recommend the ZEISS Conquest V4 6-24x50mm. The current prices are 40% off the 3-12x44mm scope and 27% off the 6-24x50mm model. In addition, there is a special promo with a $150 MidwayUSA Gift Certificate with purchase of other ZEISS Conquest V4 scopes. Use CODE ZEISS1125.
7. Amazon — Plano AW2 All Weather Rifle Case Sale, $152.90
⏺️ » Excellent wheeled case big enough for F-Class and Palma rifles
Traveling with a long gun requires a quality case that protects your valuable firearm. If you need a new case for your next hunting or match trip check out the 52″ Plano All Weather Rifle/Shotgun Case (#ad). With a 52″ internal length, this is long enough for most F-Class, PRS, Palma, and Benchrest rifles. You can also fit two hunting rifles inside (see photo). This all-weather case is strong, tough, and seals out moisture. With a Durashell Plus outer shell, this case is relatively lightweight yet durable. If you don’t need a 52″ case, Plano also offers 36″-long and 42″-long cases capable of carrying two rifles or shotguns.
⏺️ » Versatile, well-designed gun vise with storage trays
Here’s an excellent gun vise on sale for just $35.99. The versatile MTM GV-30 CaseGard Gun Vise supports rifles and shotguns for cleaning/maintenance. High and low forks allow level or angled gun placement. The rubber-padded rotating stock clamp provides a firm hold. The base has 14 different compartments for tools/solvents, plus 11 slots for jags, brushes, and screwdrivers. On the side are tabs for two cleaning rods. This GV-20 vise is made from rugged, solvent-resistant polypropylene plastic. If this sells out on GunZoneDeals, Midsouth has the GV-30 Vise for $38.00.
9. Amazon — Car Battery Jump Starter, $99.99
⏺️ » Portable Car Battery Jump Starter with attachments
When you head out to the range or the backcountry stay prepared with the NEBO 1500A Portable Car Battery Jump Starter. With 1500 peak amps, the NEBO 1500A can help jump-start your 12-volt car, truck, or SUV battery. In addition, this unit has USB ports so it can also charge cellphones and tablets. This even boasts a flashlight for night work. This is a good tool — over 82% of buyer reviews are 5-Star. An “Amazon’s Choice”, this NEBO Charger is currently $99.99 on Amazon with FREE delivery.
When traveling by air with a handgun, the pistol must be in a case with a TSA-approved lock. The Snapsafe Treklite XL Lock Box complies with TSA rules. It will hold two compact pistols or one larger pistol with magazine (which must be UNLOADED). Made with a strong polycarbonate case, This lightweight (2.2 lb) lock box is one-third the weight of a steel box. Right now the Treklite XL FDE Lock Box is $32.99 at Midsouth, 17% OFF the regular price.
As an Amazon affiliate, this site can earn revenues through sales commissions.
2025 World Action Pistol Championship
Legendary shooter Doug Koenig recently secured a major victory at the NRA World Action Pistol Championships, which took place October 21-25, 2025 in Hamilton, New Zealand. This big win was the 8th Action Pistol World Championship title Doug has earned in his remarkable shooting career.
Koenig also competed at the New Zealand Action Pistol Nationals, held the weekend prior to the World Championships. Using the event as a warm-up, Koenig delivered a flawless Nationals performance, shooting a perfect 1920-179X score to secure the NZ national title. Doug then won the World Pistol Championship with another perfect score of 1920 with an X-count of 182X. That is mighty impressive!
The World Championship, hosted by the Hamilton Pistol Club, featured a unique format, with one event per day: Barricade (Tuesday), Plates (Wednesday), Practical (Thursday), and Mover (Friday). Using Vihtavuori N320 powder, Koenig once again rose to the occasion, shooting a perfect 1920 with 182 Xs. Koenig was the only competitor to shoot a clean match, earning him the top spot in the World Championship.
Koenig also helped win the Open Team Event at the 2025 World Pistol Championship in New Zealand. The 4-person USA-CMP Open Team claimed the vaunted Team World Championship. Team members were: Doug Koenig, Joey Deleon, Benito Martinez, and Bruce Piatt (who is also a Team Vihtavuori member).
Notably teammate Bruce Piatt earned 2nd Place Overall, 2nd in the High Master Division, and 1st in the Senior Division. Competing for the 10th time on the world stage, Piatt noted that “The competition was fierce through the four stages of fire”.
These two videos show Doug Koenig in action in past years at the Bianchi Cup Range.
A proud member of Team Vihtavuori, Koenig expressed gratitude to his sponsors and supporters. “None of this would be possible without the continued support of Vihtavuori and all of my sponsors who have stood by me throughout my career.”
Do you know which one of your eyes is dominant? It’s easy to determine eye dominance with a simple exercise. Pick an object about 6-10 feet away (a light switch or door knob works well). Make an “OK” sign with your right hand (see photo) and hold that about 18″ from your face. Now, with both eyes open, look through the circle formed by your thumb and index finger. Center the circle on the object, so you can see the object in the middle.
Now, here’s the important part — while still holding your hand up, centered on the object, first close your right eye. If you don’t see the object anymore, then your right eye is dominant. If you still see the object, then repeat the procedure with the left eye shut and right eye open. If you don’t see the object when your left eye (only) is closed, then you are left-eye dominant.
The digital archives of Shooting Sports USA contain many interesting articles. A while back, Shooting Sports USA featured a “must-read” expert Symposium on Eye Dominance, as it affects both rifle and pistol shooting. No matter whether you have normal dominance (i.e. your dominant eye is on the same side as your dominant hand), or if you have cross-dominance, you’ll benefit by reading this excellent article. The physiology and science of eye dominance is explained by Dr. Norman Wong, a noted optometrist. In addition, expert advice is provided by champion shooters such as David Tubb, Lones Wigger, Dennis DeMille, Julie Golob, Jessie Harrison, and Phil Hemphill. NOTE: If the story doesn’t open at the links, go to the ssusa.org home page first, indicate you are over 18, and then CLICK HERE.
Top Rifle Champions Talk About Eye Dominance:
David Tubb — 11-Time National High Power Champion
I keep both eyes open, always. Some use an opaque blinder in rifle or shotgun shooting. If you close your non-dominant eye, you will not get as good a sight picture. If your aiming eye is not your dominant eye, you have even more of a problem to overcome.
Lones Wigger — World, National and Olympic Champion Rifleman
Shooters should try to use the dominant eye unless the vision is impaired and the non-dominant eye has better vision. You should always shoot with both eyes open since this will allow the shooting eye to function properly.
Dennis DeMille — National Service Rifle Champion
I close my non-shooting eye initially. Once I pick up my sight picture, it’s not something I focus on. For those that use a patch, I recommend that they use something white to block their view, rather than cover the eye.
Bruce Piatt — 2025 World Action Pistol Team Championship — Member of Winning Team CMP-USA
Some shooters, especially those with nearly equal or cross-dominance, will naturally find themselves squinting one eye. When anyone does this, you are also closing your dominant eye to some extent and adding stress to your face.
That’s custom paint on the stock, NOT a Hydro-dip coating. Impressive paintwork!
Our Sunday GunDay showcase rifle belongs to Shane Sivertsen (aka SoDakDasher in our Forum). This eye-catching tactical rig was smithed by Travis Stevens at TS Customs in Miller, South Dakota. Shane tells us that Travis is a “top-notch builder who builds tack-driving rifles that are still extremely shooter-friendly. Plus he is one of the friendliest guys you’ll meet.”
This rifle features a Lone Peak Fuzion Action with Trigger Tech Diamond trigger (flat shoe). Up front is a Benchmark 26″ MTU barrel chambered in 6mm BRA (a 40-degree 6mmBR Improved “BR Ackley”). It’s all nestled into a McMillan A5 stock with adjustable cheekpiece. Getting him on target is a Vortex Razor 4.5-27x56mm optic in Hawkins rings with a Vortex throw lever on the power ring for quick magnification changes. The Atlas PRS Bipod rides on an Area 419 ARCA rail up front. The barrel is finished off with a Piercision 5-Port Self-Timing Muscle Brake.
Custom Camo-Pattern Paint Job
All work on this rig was performed at TS Customs, including Cerakoting the action. The pattern on the McMillan A5 stock is NOT a hydro-dip! That is a custom Kryptek camo paint-job done in-house by a TS Customs employee. Shane liked the Kryptek pattern from day one: “It’s always a good thing to do something a little different to your equipment to stand apart from the rest of the pack.” Shane says the paint pattern is the first thing everyone notices about the rifle.
6mm BRA Chambering
Shane spent quite some time trying to decide which 6mm cartridge to choose. After much deliberation with Travis, he chose the 6mm BRA (aka “6BRA” or “6 BRA”), mainly due to the reputation this little cartridge has earned for accuracy and ease of tuning. This rifle is Shane’s second TS Customs-crafted rifle: “the [other] is basically the same action/barrel combo but set in an MPA chassis and chambered in 6mm Dasher.”
Excellent Accuracy with Varget and Berger 105gr Hybrids
Shane’s 6mm BRA is showing impressive accuracy: “Thanks to Mother Nature this spring (with cold, snowy weather), I have only been able to get 100 rounds fire-formed and the barrel broken-in. I started with 30.5 grains Varget in Lapua BR brass with CCI 450s and topped off with Berger 105gr Hybrids. Velocity averaged 2830 FPS with an SD of 4.7 from 10 rounds randomly picked from the lot.”
Shane knows there’s still more load development to do. But this rifle is grouping under one-half MOA and Shane says the gun can definitely out-shoot his abilities. He admits it’s still a work in progress but he is happy with the gun’s performance so far.
Shane praised his Piercision 5 port Muscle brake. Shane tells us: “While I am a suppressed shooter by preference, I wanted to give this brake a try. It works very well — the control and ability to stay on target for followups is remarkable. This brake works perfect on my 18-lb 6mm BRA and will be used indefinitely. Plus it will be a little payback to the other big-braked shooters on the line.”
While it’s still such a new toy, Shane doesn’t expect to make any modifications in the near future. However he says he might “upgrade to a Tangent Theta optic by the end of this season.”
Below is a comparison between the 6mm BRA and the 6mm Dasher. The Dasher has slightly more capacity, but a much shorter neck. There is some evidence that barrel throat erosion may be slower with the 6mm BRA, and the 6mm BRA is easier to fire-form.
In this interesting video, Brownells Gun Tech Caleb Savant covers the topic of linear compensators, aka “blast diffusers” or “linear blast devices”. These are quite different in function from a typical muzzle brake and they are NOT a sound suppressor. Unlike a traditional muzzle brake, a linear compensator directs the muzzle blast forward, AWAY from the shooter. This is not only good for the shooter but also for folks next to the shooter, either at the range or in a CQB law enforcement or military situation.
A “Linear Compensator”, also known as “blast diffuser”, my look similar to a muzzle brake. But it works differently. A typical muzzle brake shoots blast out the side, and can be pretty annoying for someone positioned next to the shooter. By contract, the Linear Compensator direct blast force more forward. This helps reduce perceived recoil, and importantly doesn’t send hot gasses left and ring to nearby shooters or observes. Muzzle brake output can be very annoying. This Editor once was shooting next to a .338 Lapua Magnum with a brake, just a couple feet away. With each .338 LM shot I could feel heat on arms/hands and actually feel the bones in my forearm vibrate.
Attachment Methods — Direct Thread Mounting vs. Quick-Attach Mounting
Linear compensators have become much more popular in recent years as AR-15 pistols and SBRs have proliferated. Some linear comps, such as popular models from Midwest Industries and the Troy Claymore, attach directly to the muzzle, just like a traditional flash hider or muzzle brake.
Other Linear Compensators are slip-on, quick-attach components that mount OVER another muzzle device. For example, the VG6 Precision CAGE Device (Concussion Altering Gas Expansion) attaches directly over one of their standard muzzle devices. Almost every company that makes a sound suppressor also offers a linear compensator, which typically attaches to the muzzle the same way as the silencer.
Video find by Boyd Allen. We welcome reader submissions.
Need a top-notch Ballistics App for your iPhone or iPad? Start with Ballistic: Advanced Edition (AE), the number 1 (i.e. most installed) App for iOS systems (iPhones and iPads). Ballistics AE (Advanced Edition) is the most popular iOS ballistics program for many good reasons. It offers a full feature set with Ballistic Solver, Ballistic Comparison (with up to 8 projectiles), Target Log (records group sizes), Advanced WindKit, and more. The Ballistic: Advanced Edition software is easy to use, with nice controls. Underneath it all is the proven JBM Ballistics calculator. And here’s the kicker — this excellent mobile App software is now FREE to download and install on iPhones and iPads!
This Video Explains How to Set Up and Use Ballistic: Advanced Edition
Full-featured and easy to use, Ballistics AE has been refined over many years, and it supplies rock-solid solutions derived from JBM Ballistics solver (created by James B. Millard). Unlike some other Apps, Ballistics AE is STABLE on iPhones (with various OS levels). What’s cool is that Ballistics AE is now available for FREE for both iPhones and iPads. This software is now provided by Federal Premium Ammunition, with in-App purchase functionality.
We’ve used the Ballistic: Advanced Edition program on an iPhone 5S, iPhone 6, and iPad, and it performed well. Here are some of the features we liked:
1. Mirrors output from online version of JBM Ballistics we often use for initial calculations.
2. Controls are simple to use and (mostly) intuitive.
3. Handy comparison feature lets you compare ballistics for different projectiles side by side.
4. Advanced Wind Kit allows you to account for complex wind situations.
5. Projectile and BC Databases are very comprehensive.
6. Software is regularly updated to match Apple OS changes.
This article is Copyright 2025 AccurateShooter.com. No republication is authorized. Any appearance of this story on another site obliges that site to pay liquidated damages and/or licensing fees.
Hand-loaders have never had so many great choices in single-stage presses, with many different configurations and features. There are classic O-Frame presses, Coax-style presses, Open-front presses, Pyramid presses, and compact C-Frame presses. Here is our 2019 Single Stage Press Showcase with products from Forster, Hornady, Lee, Lyman, MEC, and RCBS. We’ve included short videos showing the features of these reloading presses.
If you are shopping for a new press you should look at the various features of each. You may prefer something classic like a Rock Chucker, or the innovative open-front MEC. If you are looking for a compact press to use at the range, the Lyman C-Frame is very impressive for the price. And the Forster Co-Ax remains a great addition to any loading room.
MEC Marksman Single-Stage Press
If you are looking for a new, full-size single-stage reloading press, definitely consider the MEC Marksman. Created by the makers of the popular MEC shotshell reloading systems, the MEC Marksman combines a sturdy cast-iron frame with a modern open-front design. If you are looking for a new, full-size single-stage reloading press, definitely consider the MEC Marksman. Created by the makers of the popular MEC shotshell reloading systems, the MEC Marksman combines a sturdy cast-iron frame with a modern open-front design. With a $245.49 street price, the MEC Marksman press now costs more than an RCBS Rock Chucker Supreme press, but the MEC offers some distinct advantages — such as an open front plus a floating shell-holder system.
Our friend Gavin Gear of UltimateReloader.com got his hands on a MEC Marksman press and put it through its paces. He came away impressed with the product, saying it delivers excellent performance, and has many impressive features. Gavin tells us: “Cast iron tools and machines are a lifetime investment. The made-in-USA MEC Marksman features ductile cast-iron construction, an open-front frame design for easy cartridge access, a new floating shell-holder design with a unique retention system, and ambidextrous handle setup.” MEC also offers a wide selection of accessories for the Marksman press, including a press riser/mount, shell-holder caddy, and die trays.
Forster Co-Ax Press
If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video above, a very thorough video review by Rex Roach. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.
In recent years, Forster Co-Ax® presses have been somewhat hard to find, as demand has out-stripped supply. The Co-Ax has many dedicated fans, given its unique features, such as the floating case-holder jaws, and easy, rapid slide-in/slide-out die placement. We’ve also found that Co-Ax presses load very straight ammo and we like the ability to switch between short handle (good for bullet seating) and long handle (ideal for heavy case-sizing tasks). We also think the Forster Co-Ax has one of the best spent primer capture systems on the market — a straight drop into a removable plastic cup. Simple and it works.
Lyman Brass Smith Victory Single-Stage Press
Lyman’s sturdy Victory Single-stage Press is a full-size unit that competes with the RCBS Rock Chucker Press. With beefy cast iron construction, the Victory’s strength and leverage rivals the Rock Chucker. The press operates smoothly and the handle can be mounted on either side.
If you like to prime cases using a press, this Victory press has a priming system that’s much easier to use than the RCBS Rock Chucker system. The priming tube is right up front, with multiple primers loaded vertically in a tube. Simply push the shuttle at the button of the tube to advance the primer into place.
For convenience, the entire primer-loading system can also be removed so it doesn’t interfere with case and bullet-handling operations. We generally prefer to prime cases separately using a dedicated hand- or bench-mounted tool, but the Victory press does the job nicely.
Overall, the Victory is a great value in a full-size “O-Frame” press with sturdy construction and a solid Lyman warranty. It is available now for $219.99 on Amazon.
RCBS Rock Chucker Supreme Single-Stage Press
Nearly every serious hand-loader has owned or used the RCBS Rock Chucker press. This Editor still uses a Rock Chucker passed down by his brother 20 years ago. And yes, it is still going strong. The latest Rock Chucker Supreme single-stage press features an improved “upside-down Y-path” dual-bin spent primer catcher. Otherwise the Rock Chucker Supreme remains big, strong, versatile and sturdy. It has very strong linkages, with a compound leverage system providing plenty of power — FL-sizing is a breeze even with large, magnum cases. The 1″-diameter ram has 12.5 sq. inches of ram-bearing surface.
The Rock Chucker offers a secondary 1 1/4″ x 12 thread for shotshell reloading dies and Piggyback 3 upgrade. The Rock Chucker Supreme retails for $234.99 now at Midsouth. The Rock Chucker Supreme combines easy operation, ambidextrous handle, and outstanding strength. It has a big 4.25″ loading window that works even for big magnum cases. The long handle and central pivot design provide outstanding leverage. The RCBS Rock Chucker is definitely a quality product that can last a lifetime. For heavy-duty sizing chores this remains one of the best choices in single-stage presses.
Lyman Brass Smith Ideal C-Frame Compact Press
The Lyman Brass Smith Ideal Press is a very affordable, cast iron C-Frame reloading press. We think it is the new “class leader” in compact presses. This works great as a secondary press for your reloading room or a small press you can take to the range. The large front opening allows you to access the shell holder without hitting the support bar on other types of presses. Unlike other compact presses made from aluminum, Lyman’s Ideal press is cast iron so it is rigid and strong. The high-quality steel ram is one inch in diameter. The Brass Smith is a true ambidextrous press that can be accessed from either side and mounted the same. This is a great choice for a second, auxiliary press for depriming and bullet seating. It is now just $134.99 at MidwayUSA.
Hornady Iron Single Stage (Open-front) Press
In this “Reloading with Rosie” video, the attractive female host loads some ammo using the Hornady Iron Press. With a beefy, pyramid-style cast-iron frame with an open front, this press offers some advantages over a traditional “O-Frame” type press. Access is considerably easier, for one thing. And the top of the press includes slots to hold dies and tools — that’s really a very nice feature that saves time. Also an optional “automatic” priming system shuttles primers from a vertical tube in the back to the shell-holder in the front. That’s clever. Over all the Iron Press is a nice piece of engineering — good job Hornady. It is offered for $289.99 at Midsouth.
Lee Classic Cast (Iron) Breech Lock Press
The Lee Classic Cast Breech Lock Press offers excellent value for the money ($190.99 at Midsouth). Based on the proven design of the Classic Cast press, the updated Breech Lock series adds the quick-change die bushing and an improved primer drop system. This press is strong, with cast iron frame, all-steel linkage, and 12 square inches of ram bearing surface.
Lee says this press has the “largest opening and the longest stroke in the industry” among O-frame type presses. The handle can be mounted on either side. We love the fact that the handle ANGLE can be adjusted, as well as the lever arm length — that allows you to adjust travel and leverage to suit your preference. Smart engineering.
The new spent primer drop features a large-diameter hollow ram with clear hose that drops primers straight to a bin — that’s simple and effective. The press is very rigid and the base is wide enough for good stability. We have one of these Classic Cast Breech Lock Presses in our reloading room and it works well.
This time of year, many readers are putting their guns away in a safe for the winter. It’s easy to just tuck the guns away and forget about them. But there’s something you should do before you shut the safe door.
Koenig also helped win the Open Team Event at the 2025 World Pistol Championship in New Zealand. The 4-person USA-CMP Open Team claimed the vaunted Team World Championship. Team members were: Doug Koenig, Joey Deleon, Benito Martinez, and Bruce Piatt (who is also a Team Vihtavuori member).
Do you know which one of your eyes is dominant? It’s easy to determine eye dominance with a simple exercise. Pick an object about 6-10 feet away (a light switch or door knob works well). Make an “OK” sign with your right hand (see photo) and hold that about 18″ from your face. Now, with both eyes open, look through the circle formed by your thumb and index finger. Center the circle on the object, so you can see the object in the middle.
Custom Camo-Pattern Paint Job
If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video above, a very thorough video review by Rex Roach. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.
Lyman’s sturdy Victory Single-stage Press is a full-size unit that competes with the RCBS Rock Chucker Press. With beefy cast iron construction, the Victory’s strength and leverage rivals the Rock Chucker. The press operates smoothly and the handle can be mounted on either side.
Nearly every serious hand-loader has owned or used the RCBS Rock Chucker press. This Editor still uses a Rock Chucker passed down by his brother 20 years ago. And yes, it is still going strong. The latest Rock Chucker Supreme single-stage press features an improved “upside-down Y-path” dual-bin spent primer catcher. Otherwise the Rock Chucker Supreme remains big, strong, versatile and sturdy. It has very strong linkages, with a compound leverage system providing plenty of power — FL-sizing is a breeze even with large, magnum cases. The 1″-diameter ram has 12.5 sq. inches of ram-bearing surface.
The Lee Classic Cast Breech Lock Press offers excellent value for the money (
