Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









June 9th, 2019

Sunday GunDay: 1000-Yard Prone Rifle — Corbin’s “Maple Marvel”

.243 Win 1000 yard Maple rifle

“I have molested that rifle on several different occasions over the years. It is more beautiful in person if that is possible. Fine craftsmanship in every aspect.” — Forum Member Matt K.

.243 Win prone rifle Corbin ShellToday’s Sunday GunDay feature is a “blast from the past”, part of our big Guns of the Week archive. Some years back, Forum member Corbin Shell told us he had a new, full-custom 1000-yard prone rifle. When he sent some photos of the maple-stocked masterpiece, our collective jaws dropped. Check it out — this is truly a “Maple Marvel”.

.243 Win 1000 yard Maple rifle

Corbin’s GunDay rig is an eye-catcher for sure. This is one handsome rifle, built with all-premium components and a stunning Curly Maple thumbhole stock with adjustable cheekpiece. The rifle is chambered in .243 Winchester. It features a custom stainless RBRP action Nesika R action, with keycuts in the bottom instead of recoil lug. A Grünig & Elmiger trigger has been specially modified (milled and pinned) to work with the Nesika action. The primary barrel is a 30″ Broughton 5R Palma-contour tube. Interestingly, Corbin has a second 30″ Broughton barrel chambered in 6mmBR for use at shorter ranges.

The trigger guard, fore-arm rail, cheek adjuster, and 4-way adjustable butt assembly are all custom metal, designed by Dan Gleason. The stock is cut from exhibition-grade fiddleback maple (from Cecil Fredi Gunstocks in Las Vegas) with a Gaboon Ebony tip wood and butt-plate spacer.

.243 Win Maple rifle

Fast and Accurate
Corbin tells us the gun will put five shots into the size of a quarter at 300 yards “when he does his part.” Corbin shoots pointed Berger 105gr VLDs and 45.5 grains of H4831SC. That load runs 3180 fps. He can push it faster, but “that’s where the node was and where it shoots best”, according to Corbin.

Forum member Jim Hardy has seen (and shot against) this beautiful rifle. Jim reports: “A casual observer might think that the trigger guard, cheek plate and butt plate hardware are Anschutz — as the stock takes on the Anschutz prone pattern. However, this is ALL custom metal. The G&E trigger breaks like a glass rod and will makes my BR triggers feel inferior at best. I had the pleasure of holding, shouldering, and lusting over this gun at Camp Perry last year, and it is even more impressive in person. The killer is that there is yet ANOTHER one in a beautiful, dark figured walnut owned by Corbin’s shooting partner. BTW, both guns will hammer at 1000 yards prone.”

.243 Win 1000 yard Maple rifle

Long Range Prone Shooting with the .243 Winchester
Is the .243 Winchester capable at 1000 yards? Absolutely. John Whidden has used the .243 Win to capture multiple NRA National Long-Range Championships. John selected the .243 Win because it offers excellent ballistics with manageable recoil. John says that, at least for a sling shooter, the .243 Win is hard to beat at long range. John explains that, while you CAN get somewhat better ballistics with a .284 Win or .300 WSM, you’ll pay a heavy price in increased recoil with those bigger cartridges.

John Whidden .243 Winchester Win National Championship Long Range Reloading Caliber Barnard Action Anshutz

Running at an impressive 3275 FPS from his .243 Win, Berger 6mm 105 grain Hybrids are hard to beat, according to Whidden: “My .243 Win shoots inside a 6.5-284 with 142-grainers. Nothing out there is really ahead of [the .243], in 1000-yard ballistics unless you get into the short magnums or .284s and those carry a very significant recoil penalty.” John has tried bigger cases: “In the past I did shoot the 6.5-284. I went to the .243 Win because it had similar ballistics but had much less recoil. It doesn’t beat me up as much and is not as fatiguing.” READ Whidden .243 Winchester Report.

Permalink Competition, Gear Review, Gunsmithing No Comments »
October 16th, 2009

Krieger Barrels Now Offers 5R Rifling Option

Krieger Barrels 5RKrieger Barrels, respected maker of cut-rifled match and hunting barrels, announced it will offer 5R rifling for 6mm, 6.5mm, 7mm, and .308 caliber barrels. This kind of rifling features 5 lands and 5 grooves, but the lands are angled (slanted) on the sides (rather than 90°) for a gentler transition between land and groove. Krieger’s 5R rifling slants BOTH the leading and trailing edge of the lands (unlike “ratchet” rifling which is angled on one side only). 5R rifling also places each land opposite a groove. Having lands opposing grooves, along with slanted sides on the lands, is thought to give a better gas seal and reduced fouling. Additionally, some folks believe 5R rifling reduces jacket deformation by displacing less jacket metal. Overall, proponents of 5R rifling say it helps a barrel foul less and deliver more velocity than conventional rifling.

5R rifling will add $30 to the cost of a Krieger barrel. Krieger will NOT offer 5R rifling for gas gun barrels. Additionally, 5R rifling is offered only for constant twist-rate barrels. So, you can NOT get a gain twist barrel with 5R rifling. At this time 5R rifling is limited to 6mm, 6.5mm, 7mm, and 30 caliber bores, as listed in Krieger’s official announcement:

“Thanks to approval by Boots Obermeyer, Krieger Barrels, Inc. is now offering the true Obermeyer 5-R rifling pattern as an option on limited calibers with our barrels. We are very proud of the fact that Krieger Barrels was chosen as the only Obermeyer-approved maker of his style of 5-R rifling in North America. At this time we are limiting the 5-R option to the calibers listed below, but may offer others in the future as greater demand arises. There is a $30.00 up-charge to the base cost of the barrel for 5-R rifling. Currently available calibers:

– 6mm (.236″ & .237″ bore diameters, .243″ groove)
– 6.5mm (.256″ bore, .264″ groove)
– 7mm (.277″ bore, .284″ groove)
– .30T Palma (.3065″, .3070″ & .3075″ groove diameters)
– .308 cal (.300″ bore, .308″ groove)

5-R rifling is ONLY available in standard bore/groove dimensions listed and standard twist rates at this time. Please call if you have questions about availability of a certain caliber/twist combination. Please note, we are not, and have no plans to offer 5-R rifling in our finished ‘Gas Gun’ lines of M14, M1 Garand, AR-15, and AR-10 variants.”

5R Rifling in Production Guns
In the past, limited runs of Remington 700 tactical rifles, including some LE and SS (stainless special) models, have been offered with factory hammer-forged 5R barrels. These rifles have a reputation for shooting faster and more accurately than Rem 700s with conventional factory barrels. The Remington 5R barrels, though based on Obermeyer designs and similar to Mike Rock 5R barrels produced for the Army’s M24 sniper rifles, are NOT cut-rifled, but are produced in-house using the hammer-forging process.

Krieger Barrels 5R

Thompson/Center (T/C) Icon and Venture rifles currently feature 5R factory barrels. On T/C 5R barrels, the sides of each land are cut at a 65° angle vs. a 90° angle for standard rifling. See diagram. T/C claims that “because the edges of each land do not cut into and deform the bullet jacket… there will be less jacket fouling in the grooves”. T/C says this produces “greater bullet stability over multiple shots, and ultimately a rifle that’s easier to clean[.]”

Permalink Gunsmithing, New Product, News 4 Comments »