Carlito’s Way: High-Tech Benchrest Shooting in Argentina
This story has all the ingredients: exotic location, exotic hardware, cool POV video (with John Lee Hooker blues soundtrack), plus something you’ve probably never seen before — a gravity-fed cartridge caddy that loads a PPC round into a benchrest rig with the push of a button. Watch this video to see Benchrest in Argentina with some very cool equipment:
Soundtrack includes John Lee Hooker’s blues classic “Boom, Boom” (starting at 0:28).
This video was filmed by our friend, Frenchman Pascal Fischbach, during his recent visit to Argentina. In Buenos Aires, Pascal met with action-maker extraordinaire Carlos (“Carlito”) Gonzales, creator of the CG Thunderbolt action. The video shows Carlito shooting groups with his CG-actioned benchrest rifle and MCF (“Manual Cartridge Feed”) ammo caddy. Look for the push-button control at the 1:15″ time-mark. The five-shot groups, shown at 1:20″, are pretty impressive. Even more impressive is how flawlessly this trick cartridge-fedding system works.
About Carlito’s Benchrest Rifle
The rifle features Carlito’s CG thunderbolt action, in a low-profile carbon-fiber stock also made by Gonzales. Up front is a Bukys-style tuner. If you watch the video carefully, you may wonder “how do the cartridges get into the action?”, since you won’t see the shooter (Carlito) pulling rounds from a loading block. Well the secret is that metal contraption to the left of the gun. It is a gravity-fed caddy connected, via cable, to a hand control. After working the bolt to extract a fired case, the shooter can push a button and the next round drops down from the upper left into the left port/right eject action. Simply close the bolt and you’re ready to roll. For more information, visit Benchrest.com.ar or email casagonzalec [at] benchrest.com.ar .
External Horizontal Cartridge-Feeder
The Gonzales loading device is an open-ended, covered metal tray situated on the left side of the action (but it does not touch the gun — it is supported by an arm attached to the front rest). This feeds into the left-side loading port. The cases are gravity-fed, but the shooter has positive control over feeding. A cable with a push-button control runs from the magazine down to the rear foot of the pedestal rest. You just push the button to drop one cartridge from the magazine. We don’t know exactly how the cartridge is released in the magazine itself, but in the video below you can see how the push-button works. This device has been approved for competition by USA and International benchrest sanctioning bodies.
Photo by Rich Pollock of Benchrest.ca
Video Shows Cable-Operated Cartridge Feeder in Action
