Revive Your Brass with DJ’s Brass Service & Restoration
With top-quality cartridge brass approaching $1.00 per case, it’s more important than ever to get maximum life from your match brass. Annealing can extend the useful life of your brass, and ultrasonic cleaning allows you to eliminate carbon build-up inside cases that have been fired numerous times. You can certainly do annealing and ultrasonic cleaning yourself, but to get the best (and most consistent) results, you’ll need to invest in quality equipment and spend a good deal of time and effort learning how to use it properly. Likewise, turning case necks requires expensive tools, and it takes time and practice before you’ll get perfectly-turned necks.
DJs Brass Offers Annealing, Cleaning, and Neck-Turning
If you don’t have the resources to purchase annealing and ultrasonic cleaning machines, or if you don’t have the time to neck-turn hundreds of cases — don’t fret, there is an affordable option. DJsBrass.com, run by benchrest shooter Darrell Jones, offers annealing, ultrasonic cleaning, neck-turning, and complete brass prep services (including OAL trimming) at very reasonable rates. Darrell will anneal 100 cases for $15, and he’ll neck-turn your cases (any caliber), starting at $30.00 per hundred. Even if you’re a skilled neck-turner, if you just acquired a new caliber, it might make sense to send the work to Darrell, instead of purchasing new expander mandrels and turning arbors.
False-Shoulder Forming for Wildcats
Do you shoot an “improved” short-necked wildcat like the 6mm Dasher? Want your fire-forming to go without a hitch? Darrell can take your parent brass and create a false shoulder so you get a good crush fit in the chamber. If you’re running a tight-necked chamber he can create a false shoulder AND turn the top half of the neck to fit your chamber.
Video Shows Annealing Process
In the video below, Darrell explains the wide variety of brass restoration services he offers. Darrell says he can “bring your brass back to life” and we have found that to be true. We had some 6mmBR brass with no-turn necks that started to lose their “competitive edge” after just 7-8 loadings. The neck tension had become inconsistent from case to case, and bullet seating force (measured with a gauge-equipped K&M arbor press) varied widely. We were seeing unexplained flyers, and ES had nearly doubled compared to when the brass was fresh. Annealing the cases really made a difference. The neck tension was much more consistent and bullets seated more uniformly with less “spiking” of seating force. Paying $15 for annealing is a lot cheaper than buying a new box of brass for $80.00 or more!
Darrell offers a variety of services at affordable rates. To order work by Darrell, visit DJsBrass.com, or call (205) 461-4680:
Case Annealing Only
Cost: $15.00/100 for standard cases; $20.00/100 for magnum cases.*Combination Service (Cleaning and Annealing)
Ultrasonic Cleaning, Check for split necks, Anneal case necks.
Cost: Starting at $20.00/100 standard and $25.00/100 for magnum cases.*Full Service (Case Prep, Cleaning, Annealing)
Uniform primer pockets, Chamfer, Ultrasonic cleaning/polishing, Anneal case necks.
Cost: Starting at $30.00/100 and up.*Neck Turning or Trim-to-Length Custom Order Service
Cost: Starting at $30.00/100 for standard cases.*
(Darrell can also resize necks or false shoulder your cases. Call for quotes.)Muzzle Brake Ultrasonic Cleaning
Removes carbon buildup to restore critical bullet clearance requirements.
Cost: $15.00 + flat rate USPS actual shipping.*Add USPS flat-rate return shipping. Call (205) 461-4680 for quotes on miscellaneous, military bulk brass or high volume discount. Note: Prices subject to change.
The new Bench-Source automatic case neck annealing machine processes 500-600 cartridges per hour, from 22 Hornet up to the big magnums. Heating time from 1.5 to 10 seconds is precisely controlled by a microprocessor with both a manual mode and “Automatic” mode. Note that the cartridge spins in place when it is at the annealing position, giving a uniform anneal. After annealing, the case exits via a gravity-fed drop port, so you don’t have to handle hot cases. Note: In the video below, the flame you see on some cases is burn-off of temp-indicating marker. Watch carefully and you can see that the case being annealed spins while being heated.
