Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 9th, 2008

Applying Boron Nitride (HBN) to Bullets

hexagonal boron nitride bullet coatingIn our recent article on Bullet Coating we covered the basic principles of applying dry lubricants to “naked” bullets. This article covered the three main coating options: Molybdenum Disulfide (Moly), Tungsten Disulfide (WS2 or “Danzac”), and Hexagonal Boron Nitride (HBN or “White Graphite”). All three compounds can be impact-plated on to bullets with relative ease, using inexpensive equipment. Moly is still the most popular choice, but many more shooters are considering HBN because it is ultra-slippery, it is less messy, and it offers some advantages over Moly or WS2.

After we published our Bullet Coating feature, many readers asked for more info on HBN. Some current moly users had questions about switching over to Boron Nitride. Recently Forum member Larry Medler published an excellent web article discussing the process of applying 70nm HBN using plastic jars and a Thumler’s rotary tumbler. If you are working with HBN currently, or plan to experiment with Boron Nitride, you should read Medler’s HBN-Coating Article.

After coating some bullets for his 6XC, Medler seems “sold” on the merits of HBN. Larry writes: “The coating process is much better than Moly — no black mess. My coating process times are the same as for Moly. Three hours of tumbling in the corn cob and three hours of tumbling in the steel balls with 3.0 grains of hBN Powder. The bullets look something like sugar-coated donuts when I dump the jar of steel balls with the freshly coated bullets into my sieve to separate. The coated bullets wipe clean to the touch with a little towel rub down and remain very slippery. So far I am very pleased with my coated bullets’ smoothness and appearance.”

hexagonal boron nitride bullet coating

Field Tests Are Very Promising
Interestingly, Larry’s HBN-coated bullets are shooting flatter, with tighter vertical, than his moly-coated bullets. Since he has also pointed the tips of this batch of bullets, it’s not clear whether the reduced drop is due to the pointing or the HBN coating, but the results are certainly encouraging: “I have shot the HBN-coated bullets a couple of times now at 600 yards and everything seems to be okay or a lot like Moly. Funny thing is the HBN-coated bullets are shooting higher by 7/8 MOA. I have to check the speed and see if it has changed enough for that POI change. Good news is I had a string of 15 shots with less than 1.5 inches of vertical which is the best I have ever seen with my rifles. Is that due to the hBN or bullet pointing?”

Boron Nitride 500gr Packs Available for $20.00
Larry acquired more HBN than he needs, so he is offering smaller quantities for other reloaders to try. Larry tells us: “If anyone would like to try using the 70 nm Hex Boron Nitride powder, I have made a few small bags with 500 grains of the HBN powder. That’s enough to coat 10,000 -16,000 bullets based on my results so far.” $20.00 includes shipping. Send email to anyrange [at] comcast.net to order or to check availability.

Photos courtesy Larry Medler, All Rights Reserved

Permalink - Articles, Bullets, Brass, Ammo 1 Comment »
August 22nd, 2008

Boron Nitride Sources and Application Procedures

Hexagonal Boron Nitride (HBN) is an advanced bullet-coating material. HBN, also known as ‘White Graphite’, has similar (hexagonal) crystal structure as graphite, though it is a much better lubricant. For those who prefer shooting coated bullets, HBN appears to have many advantages over molybdenum disulfide (moly). First, it is much more slippery, so it can reduce friction more effectively. Second, it goes on clear, and when applied correctly it doesn’t leave a dusty, chalky finish that can come off on your fingers. Most importantly, HBN will not react with moisture to leave potentially harmful chemicals in your barrel.

Hexagonal Boron Nitride Bullet Coating

Boron nitride-coated DTAC bullets are sold by Superior Shooting Sytems (David Tubb). Tubb’s company also offers HBN bullet-coating services for a fee (minimum quantity 1000). However, many shooters want to plate their own bullets with Boron Nitride. Lowerfriction.com sells hexagonal boron nitride dry lubricant powder in 1-lb and 10-lb quantities. The two particle sizes appropriate for bullet coating are 70 nm (MK-hBN-N70-Nano) and 0.50 micron (MKhBN-050). Some shooters prefer the smaller 70 nm version, while others say the larger 0.50 micron works fine. Lowerfriction.com sells 70 nm HBN for $90.00 per pound, and the 0.50 micron HBN for $79.00 per pound. CLICK HERE for order page.

Lowerfriction.com allows provides instructions for coating bullets with Tungsten Disulfide (WS2), but company technicians say the same procedure can be used with HBN:

Tumbling/Vibratory bowl coating
This method is ideal for bullets and other small parts. Speed and friction determine how effectively the material bonds to the part. The greater the speed and the pressure of application, the greater the bond. For best results use a power tool. A buffing wheel, Dremel tool or even a hone can be used.

Clean and degrease the part.
Take 5-6 small empty plastic bottles (empty aspirin bottles will do). Put few parts in the bottle and fill the bottle (up to 75%) with WS2 powder. Fill all bottles likewise.
Put the bottles in vibratory bowl/tumbler with sand or vibratory media.
Vibrate/Tumble for 4-5 hours.
Empty the bottles (you can reuse WS2) and wipe clean the parts with soft tissue/cloth.

Bullet Coating — Step by Step with Photos
A photo-illustrated Guide to Bullet Coating is available on the WrzWaldo website. This site is maintained by a Pacific NW shooter who retails 0.5 Micron Tungsten Disulfide (WS2) and will soon be offering Hexagonal Boron Nitride (HBN) as well. The website shows how to plate bullets using 0.177″ BBs in pill bottles, which are then agitated in a vibratory tumbler. This is a simple procedure that isolates the plating media from your tumbler, and covers the bullets very completely in 30-40 minutes. WrzWaldo says his method works equally well for both Tungsten Disulfide (WS2) and Boron Nitride (HBN). The photos below show bullets coated with WS2.

Permalink Reloading 1 Comment »