Bix’n Andy Savage TacSport Pro X and Savage Dakota Triggers
Article based on review by Les Voth
In 2012 benchrest shooter Chris Harris, owner of BulletCentral.com, brought Austrian gunsmith and engineer Andy Atzl’s Bix’n Andy triggers to America. Since then, their collaborative innovation has not slowed or stopped. Well known to the benchrest world, the Bix’N Andy Remington 700 Competition trigger with its frictionless ball trigger design, has broken records and surpassed previous trigger designs what came before The mechanism that replaced friction designs has gained favor among their shooters who have Bix’N Andy triggers on their rifles
Seeking to go beyond providing triggers for Remington 700s, Rem 700 clones, Tikkas, Sakos, and Barnards, BulletCentral.com now offers atop-quality, drop-in Bix’n Andy replacement triggers for the Savage 110 line of rifles. As these popular Savage rifles are offered in many configurations, including competition rifles, hunting rigs, and varmint rifles, it made sense to offer a top-quality Bix’N Andy trigger for Savage rifles.
Bix’N Andy Savage Trigger Review — UltimateReloader.com
In my association with Bullet Central, as their trigger repair and warranty guy, I’ve already seen these new Bix’N Andy Savage triggers installed on competition single shots, prairie dog rifles, truck guns, deer/hog hunting rifles, and varmint rifles. The appreciation shown by their new owners, for having access to the same technology as the most expensive ELR, PRS, F-Class rifles is great to witness.
Installation in Savage Action is Fast and Easy
Changing the trigger on a Savage 110 is as simple as removing the stock, pulling one pin to remove the stock trigger, and putting the new trigger in its place with the return of the pin.
Savage Tacsport Pro X (3.5 oz to 2.2 lbs) | Savage Dakota (1 lb. to 4.4 lbs.)
The Savage TacSport Pro X trigger has a pull force weight range from 3.5 ounces to 2.2 pounds, and the Dakota model starts at one pound and goes up to 4.4 pounds. With the TacSport Pro X model you can change the shoe, from curved, to straight, to the Gator grip shoe, without disassembling the trigger.
When using a Bix’n Andy Savage trigger for the first time, you’ll instantly sense how it precise and smooth it feels. Because you are not trying to “overcome” something with the trigger force it is set at. You’ll note that the movement feels smoother than a friction-based trigger (with the same pull weight).
When you set a trigger to your desired pull force, whether it is under 10 ounces, or over two pounds, the Bix’n Andy trigger will feel lighter than the others because of its inner mechanism. You are not trying to “overcome” you are “setting off” the trigger, if that’s how to describe it.
Also, when some triggers release the cocking piece, they stop at a wall. Bix’n Andy triggers do not. They follow through with slight over-travel, so the rifle is not upset during that time the bullet has not yet exited the barrel. This is a feature that the Bix’n Andy Savage TacSport triggers and also the Dakota share with the original Benchrest triggers from the same company.
Benefits of Trigger Replacement in Savage Rifles
Why would you replace the stock trigger on a Savage 110? Well, it’s like Chuck said on Friday when he came to pick up a truckload of prairie dog pills – “If yer gonna git serious about shooting prairie dogs, yer gonna change triggers!” Who’s Chuck? He’s a retired Vietnam vet/volunteer NRA Range Officer. When asked how many prairie dogs he shot on his last trip, he said “…about 400.”
That many trigger pulls demand a trigger that works, one that doesn’t distract you from the job at hand, and one that allows you to shoot little targets a long ways away.
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
For this Saturday Showcase, we feature some top-tier products that have set new standards for quality and effectiveness. First off is the impressive new NEXUS single-stage press from Short Action Customs. Then we feature Bix’N Andy triggers, which have found favor with competitors in many disciplines from short range Benchrest to ELR competition. Now that Jewell triggers are becoming harder to source, Bix’N Andy units will be seen on more rifles than ever. For those who turn case-necks, we feature the remarkable IDOD machine from F-Class Products — simply the best automated neck-turner ever created.
As a bonus we offer two very informative interviews from SHOT Show 2024. The first covers the product line at Bullet Central, while the second reviews the latest and greatest rifle actions from BAT Machine.
Short Action Customs NEXUS Press
Short Action Customs (SAC) has crafted a very impressive and innovative single-stage press. The innovative $875 NEXUS press has impressive design features. The NEXUS Press boasts dual cam-over pucks, which precisely stop the movement of the floating die block. SAC explains: “We wanted to have the Nexus press cam-over independently of the shell holder. Every single cycle of the press, your hard cam-over pucks limits the travel, which gives you the same amount of cam over every single cycle.” The press can adapt to various diameter dies with floating inserts in the top section (see video). The NEXUS also has a floating shell holder system, which is quick change and tool-less. SAC states that this shell holder system “allows .010″ more sizing than all other shell holders on the market”.
Bix’N Andy Triggers
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage designs, Bix’N Andy triggers are extremely precise, repeatable, and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference. Bullet Central is currently the exclusive official USA importer for Bix’N Andy triggers.
Bryan Blake, a very clever machinist and gunsmith, has created an ultra-precise and speedy neck-turning machine. Bryan, who runs Blake Machine, Blake Barrel, and F-Class Products has created a system that uses twin precision cutter tips to turn case necks inside and out quickly and efficiently, with superior precision. This advanced IDOD Neck Turning Machine holds cases securely in a precision-machined spindle attached to an electric motor. Twin blades move precisely during the cutting process, milling the necks inside and out. The turned necks come out perfect every time, with the shoulders trimmed exactly (with doughnut removed) as well.
If you turn hundreds of cases during a shooting season, you may want to buy an IDOD from F-Class Products. The secret to the efficiency of the Blake IDOD is a vibration-free motor, high-mass case-holder, precision OD/ID-adjustable cutter, along with an advanced tracking system that moves the cutter heads towards the case neck (and back again) with absolute, 100% repeatable precision.
Bullet Central — Major Product Lines
This F-Class John video features a lengthy interview with Bullet Central representative Zachery, covering the many products Bullet Central offers. Products featured include Bix’N Andy triggers (0:55 time-mark), Micron Dies (5:20); Dual-Ram Press (8:08); Custom Barrels (12:00); BAT Actions (14:57). During this video Zachery also explains the wide range of rimfire ammo Bullet Central carries.
BAT Machine Actions — Showcasing Different Sizes and Features
This video features the impressive, latest generation BAT Machine actions. The video covers the full range of actions from the smaller SV/DS actions, to Model B, then Model M with integral lug and Picatinny Rail. The BAT representative then explains the features of BAT’s Nuevo actions (2:28 time-mark), which BAT builds for Bullet Central. For ELR and large Magnums BAT makes the model L and Model EXS. You can see all the current BAT actions at BatMachine.com/bat-actions. NOTE: From that page, scroll down and then select your particular discipline, such as Short-Range Benchrest, F-Class, Long-range Benchrest. You can also select repeater actions for hunting and/or PRS/NRL.
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
Bix’N Andy triggers are available for a variety of actions and there are models for various competition disciplines. These triggers start at $210.00. We like the single-stage for benchrest rifles and the two-stage for Palma rifles and hard-hold competition disciplines.
Yesterday we featured nine major Black Friday Sales from leading vendors. With those sale programs you can save hundreds of dollars on firearms, gun safes, optics, reloading tools, ammo and more. Here are ten more Black Friday specials, many of which run through end of day on December 2, 2024, Cyber Monday. Benchrest and F-Class shooters check out the deals at Bullet Central and Precision Reloading. PRS/NRL shooters will like the MDT Black Friday sale, while hunters will find many great deals at Cabela’s and Sportsman’s Warehouse.
Sportsman’s Warehouse Black Friday Sale — Save Up to 60%
Sportsman’s Warehouse is running a major Black Friday Sale for just two days — 11/29/24 and 11/30/24. There are major savings on optics, firearms, ammo, hunting clothing, tents, outdoor supplies and more. Check out some of the best deals we found above, but there are hundreds of other bargains. If you need a new hunting rifle, this is a good time to buy.
Bullet Central Black Friday Sale
The Black Friday Sale at Bullet Central runs from Wednesday 11/27/2024 through Saturday 11/30/24. This is a great sale — there are significant savings on custom actions, stocks/chassis systems, pre-fit barrels, reloading dies, and optics.Top Deals include 25% Off Vortex products, 20% Off Bix’N Andy triggers, and 10% Off all actions. NOTE: We are not sure if the discounts have already been applied automatically to the listed prices. You should check with Bullet Central.
Precision Reloading is running a notable Black Friday Sale with a 12% discount on nearly the entire selection of products. Use CODE SAVE12 to get 12% off orders of $49.00 or more. Click Here to see popular sale items including powder, primers, ammunition, cartridge brass, and reloading tools.
MDT Black Friday Sale — 10% to 40% Savings on Everything
MDT Sporting Goods (MDT) is a major player in the tactical and precision rifle segments. MDT makes high quality chassis systems, buttstocks, bipods, grips, brakes, and other accessories. This Black Friday Sale is MDT’s only major discount program of the year. Grab big 10-40% savings now while you can.
Cabela’s Black Friday Deals — Savings Up to 50%
Cabela’s has been running an extended Black Friday Week Sale. There are major discounts on optics, hunting gear, tripods, gun safes and more. One super deal is the Garmin Instinct Solar GPS Smartwatch, a great accessory for hunters and hikers in the backcountry. This is now just $199.98, a $200.01 discount off the normal $399.99 list price.
Primary Arms — Huge Black Friday Sale — 25% to 35% Savings
Black Friday for Black Rifles — that’s a key theme for the Primary Arms Black Friday Sale. Enjoy major savings on uppers, lowers, barrels, triggers, rails and handguards. In addition, there are 15% discounts on optics and suppressors are discounted.
MidwayUSA — Cyber Week Sale Discounts on Optics and Gear
MidwayUSA runs a major 8-day-long “Cyber Week” sale from 11/25/2024 through 12/2/2024 at 11:59 pm. Every day since Monday 11/25 there have been new deals. Some of the best bargains are featured in the graphic above. Bargains include 28-60% off Vortex optics, 50% off SIG Rangefinders, 33% off Tripod combos, and 76% off Browning sleeping bags. MidwayUSA is also running a Cyber Sweepstakes Contest with $1000 worth of prize gift certificates.
Big Black Friday Sale at H&H — Every Firearm on Sale
H&H Shooting Sports is running a massive Black Friday sale with every firearm in the store discounted. Direct price cuts range from $25 to $95 on new guns plus all used firearms are discounted 15%. Along with the gun deals, H&H is running a Black Friday Sale on Liberty Safes. These Black Friday discounts are in effect through 11:59 pm on Sunday December 1, 2024.
The Safe Keeper Black Friday Sale — Two Days Only — Save $100s
Need a new gun safe? This is a great opportunity to save big bucks on a quality Liberty, Superior, Browning, or Champion gun safe from The Safe Keeper. Many sizes are available with discounts up to $1000.00. But don’t hesitate — this sale runs for two days only, ending at 11:59 pm on November 30, 2024.
BONUS: Black Friday Give-Away Contest at Midsouth
Here’s chance to win big this weekend. Midsouth is running a noteworthy Black Friday Give-Away Contest now through Monday 12/2/2024. Midsouth will draw 13 Lucky WINNERS to win a Hornady Ammo Plant, Hornady AP Progressive Press, a Frankford Arsenal F1 Reloading Press, or a many other shooting and reloading items. All totaled there are 13 Prize Packs. You can visit every day for another chance to enter and win. Note: No purchase is necessary. You must be 21+ to enter and dealers are excluded.
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
For this Saturday Showcase, we feature some top-tier products that have set new standards for quality and effectiveness. First off is the impressive new NEXUS single-stage press from Short Action Customs. Then we feature Bix’N Andy triggers, which have found favor with competitors in many disciplines from short range Benchrest to ELR competition. Now that Jewell triggers are becoming harder to source, Bix’N Andy units will be seen on more rifles than ever. For those who turn case-necks, we feature the remarkable IDOD machine from F-Class Products — simply the best automated neck-turner ever created.
As a bonus we offer two very informative interviews from SHOT Show 2024. The first covers the product line at Bullet Central, while the second reviews the latest and greatest rifle actions from BAT Machine.
Short Action Customs NEXUS Press
One of the most notable new products at SHOT Show 2024 was an innovative single-stage press from Short Action Customs (SAC). The new $775 NEXUS press has impressive design features. The NEXUS Press boasts dual cam-over pucks, which precisely stop the movement of the floating die block. SAC explains: “We wanted to have the Nexus press cam-over independently of the shell holder. Every single cycle of the press, your hard cam-over pucks limits the travel, which gives you the same amount of cam over every single cycle.” The press can adapt to various diameter dies with floating inserts in the top section (see video). The NEXUS also has a floating shell holder system, which is quick change and tool-less. SAC states that this shell holder system “allows .010″ more sizing than all other shell holders on the market”.
Bix’N Andy Triggers
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage designs, Bix’N Andy triggers are extremely precise, repeatable, and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference. Bullet Central is currently the exclusive official USA importer for Bix’N Andy triggers.
Bryan Blake, a very clever machinist and gunsmith, has created an ultra-precise and speedy neck-turning machine. Bryan, who runs Blake Machine, Blake Barrel, and F-Class Products has created a system that uses twin precision cutter tips to turn case necks inside and out quickly and efficiently, with superior precision. This advanced IDOD Neck Turning Machine holds cases securely in a precision-machined spindle attached to an electric motor. Twin blades move precisely during the cutting process, milling the necks inside and out. The turned necks come out perfect every time, with the shoulders trimmed exactly (with doughnut removed) as well.
If you turn hundreds of cases during a shooting season, you may want to buy an IDOD from F-Class Products. The secret to the efficiency of the Blake IDOD is a vibration-free motor, high-mass case-holder, precision OD/ID-adjustable cutter, along with an advanced tracking system that moves the cutter heads towards the case neck (and back again) with absolute, 100% repeatable precision.
Interviews from SHOT Show 2024
Bullet Central — Major Product Lines
This F-Class John video features a lengthy interview with Bullet Central representative Zachery, covering the many products Bullet Central offers. Products featured include Bix’N Andy triggers (0:55 time-mark), Micron Dies (5:20); Dual-Ram Press (8:08); Custom Barrels (12:00); BAT Actions (14:57). During this video Zachery also explains the wide range of rimfire ammo Bullet Central carries.
BAT Machine Actions — Showcasing Different Sizes and Features
This video features the impressive, latest generation BAT Machine sctions. The video covers the full range of actions from the smaller SV/DS actions, to Model B, then Model M with integral lug and Picatinny Rail. The BAT representative then explains the features of BAT’s Nuevo actions (2:28 time-mark), which BAT builds for Bullet Central. For ELR and large Magnums BAT makes the model L and Model EXS. You can see all the current BAT actions at BatMachine.com/bat-actions. NOTE: From that page, scroll down and then select your particular discipline, such as Short-Range Benchrest, F-Class, Long-range Benchest. You can also select repeater actions for hunting and/or PRS/NRL.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Amazon — Frankford Arsenal Intellidropper, $149.90
⏺ Save 22% or more on excellent powder scale/dispenser
A good electronic powder scale/dispenser lets you more precisely with greater charge-weight consistency. The Frankford Arsenal Intellidropper delivers 0.10 (one-tenth) of a grain accuracy. This modern, easy-to-use machine also connects via Bluetooth to a very handy App on your phone that stores your loads for various cartridge and bullet types. Priced at just $149.90 on Amazon, this is an awesome deal. This same Intellidropper Platinum sells for $229.99 elsewhere — $80 more than the Amazon price.
2. Sportsman’s Warehouse — Optics Clearance Sale
⏺ Big savings on optics from Nikon, Leupold, Crimson Trace, Burris and more
Once a year Sportsman’s Warehouse has a giant End-of-Summer Optics Clearance Sale. With this major sale you’ll find big discounts on a wide range of optics from leading manufacturers including Nikon, Leupold, Crimson Trace, Bushnell, SIG Sauer, Meprolight, Burris, and more. Save on riflescopes, binoculars, spotting scopes, laser rangefinders, and red dot sights.
3. Natchez — Lyman Labor Day Sale, Save up to 22%
⏺ Significant savings on Lyman tools and combo kits
Lyman makes quality products from brass tumblers to case trimmers. Check out the Lyman Sale over at Natchez. You can save on Lyman powder dispensers, case trimmers, Case Prep center, brass tumblers, trigger gauges, and more. In addition, the very complete Lyman Reloading Kit with Turret Press is discounted $72.50. This is a great opportunity to pick up some quality Lyman tools for your reloading room.
4. Natchez — Bushnell Optics Sale
⏺ Great fall deals on Bushnell scopes, LRFs, and binocs
Are you looking for a quality yet budget-priced scope for your hunting rifle, or perhaps a set of binoculars for that fall hunt? Check out this Bushnell Clearance Sale at Natchez. You’ll find Bushnell scopes, binoculars, and rangefinders at heavily discounted prices. For example the Bushnell 3-12x40mm Prime Multi-X scope is just $194.99, a $50 savings off the regular $244.99 price.
⏺ Excellent pistol plus Sierra ammo and 5 magazines
If you’re in the market for a good 9mm defensive pistol, check out the PSA Dagger Compact 9MM PistolCombo Kit. For under $400 you get the PSA Dagger pistol, five 15-rd PMAG Magazines, AND 100 rounds of Sierra Sports Master 9mm ammunition. This is a great combo for the money. NOTE: This pistol has an optics-ready slide and a threaded barrel for use with muzzle brake or suppressor.
6. Bullet Central — Bix’n Andy TacSport Pro-X Triggers
⏺ Big savings on excellent trigger for hunting and tactical rifles
Bix’n Andy makes some of the best competition triggers, much respected for their repeatability and reliability. The latest Bix’n Andy trigger is the TacSport PRO-X. This new model brings the feel of a Bix’n Andy Competition trigger to the TacSport family. This rugged trigger boasts an encapsulated housing that protects the stainless steel internals. The Pro-X will work very well for a variety of disciplines — precision (PRS/NRL) shooting, target shooting, and long-range hunting.
7. Amazon — HighWild Target Stand, $29.99
⏺ Use this sturdy metal stand with your wood target frame
At many ranges you need to set up your own rifle targets. A handy system combines a sturdy metal base with a wood frame. For under $30 you can get the Highwild Adjustable Target Stand Base. This adjustable metal stand base allows you to use wood frames of various sizes. This easy-to-transport metal stand adjusts from 8″ to 24″ in width, so it works with a variety of target frame sizes.
8. Amazon — Caldwell Front and Rear Filled Bag Set, $29.24
⏺ Good, inexpensive set-up for sighting-in hunting rifles
If you need an inexpensive set of bags to zero your hunting rifle this fall, consider the Caldwell DeadShot Front and Rear Bag Combo. The front bag can also be used in PRS/NRL matches for support. NOTE: Both front and rear bags come filled with corn cob media to allow for immediate use. These bags be used on virtually any surface, and are stable on wood, or concrete benches or rotating shooting stands.
⏺ Nice knife (three color options) with six replaceable blades
For hunters, a sharp and sturdy knife is essential. A good, affordable option is the Outdoor Edge 3.5″ RazorLite EDC Knife which comes with six (6) replaceable blades. Each blade is securely seated in a black oxide-coated steel blade holder, allowing fast blade replacement at the push of a button. This is also a good choice for campers and boat owners who need a razor sharp knife with easily-changed blades. NOTE: This knife is offered with three handle colors for the same $29.95 price: Orange (as shown), Blue, and Gray.
10. Midsouth — RCBS Case Tumbler, $134.99 with RCBS Rebate
⏺ Great price plus $25 further savings with RCBS Rebate
Need a tumbler to clean a large load of brass? Grab one of these RCBS Rotary Tumblers while they are on sale and RCBS offers a $25 Rebate. This unit has a 2-gallon capacity and ships complete with 5 pounds of stainless steel media. User reviews have been very positive. Price-wise, this is a very good deal at $159.99. The very same RCBS Tumbler is currently $199.97 on Amazon. The $25 RCBS Rebate lowers your final net price to just $134.99!
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
Do you occasionally get completely unexplained flyers, or have a shot land straight down at 6 O’Clock, right below your point of aim? That could be caused by poor or inconsistent trigger technique. How you pull the trigger can and does affect your accuracy.
Many gun enthusiasts start with pistols. When they later start shooting rifles they may carry over some not-so-good practices acquired from shooting handguns with heavy 4 to 6-pound trigger pulls. You may want to “re-learn” your trigger techniques to get better rifle results.
Shooting Sports USA has a good article on trigger technique that offers many useful tips. That article also has many helpful illustrations, including the one shown above. Another illustration shows different types of trigger shoes (straight vs. curved) and explains how each makes a difference: “With a lightly curved trigger, the shooter’s finger can contact the trigger either high or low according to preference. Higher contact will increase the resistance.” READ ARTICLE HERE.
The article analyzes common errors, such as pulling the trigger with the very tip of the finger rather than the pad of the index finger: “Using the tip of the finger can lead to lateral pressure on the trigger, which throws off the shot.”
The article also explains that you should check your trigger regularly to make sure it is functioning properly and is not out of adjustment: “Just like any other moving part, the trigger can suffer from wear. In such a precise mechanism, tiny amounts of wear can cause major problems.”
The ergonomics of the Eliseo Tubegun allow a nice, straight trigger pull.
Trigger Tips
Six Suggestions for Making your Trigger Control More Consistent.
1. If your triggers are adjustable, set the pull weight appropriate to the discipline. For a hunting rifle, you don’t want an ultra-light trigger pull. For High Power, you may want a two-stage pull, while on a Benchrest rifle you may prefer a very light trigger.
2. If you have a two-stage trigger, experiment with different combinations of First Stage and Second Stage.
3. Have a friend watch you as you pull the trigger, and maybe even take a close-up video as you pull the trigger. This can reveal a variety of flaws.
4. Practice dry-firing to see if flaws in trigger technique are causing gun movement.
5. As an experiment, try pulling the trigger with your middle finger. Ergonomically, the middle finger has a more straight alignment with the tendons in your hand. This exercise can help you identify alignment issues with your index finger.
6. For stocks with adjustable Length of Pull you may want to set the LOP differently for bench shooting vs. prone or F-Class shooting.
When Only the Best Will Do…
German-made Bix’N Andy triggers, available from BulletCentral.com, are among the very best you can buy. Available in both single-stage and two-stage, Bix’N Andy triggers are extremely precise, repeatable and smooth. The unique internal, friction-reducing roller ball system allows for extremely low reset force, yielding an ultra-crisp let-off. Bix’N Andy triggers can be fitted with a variety of trigger shoes according to shooter preference.
When Only the Best Will Do…
