Here’s a great YouTube video that shows the creation of a high-end, 22-250 varmint rifle from start to finish. The rifle was crafted by Chad Dixon for O’Neill Ops. Once the build is complete, the video shows the rifle being tested at 440 yards. With the camera filming through the scope, you can even watch the trace, starting at the 2:36″ time mark (this is very cool).
Watch this Video in HD!
Any person with an interest in gunsmithing should watch this video. It shows barrel profiling, tenon-thread cutting, chambering, CNC stock inletting, bedding, and stock painting. This is one of the best short videos of its kind on YouTube.
For this build, Chad Dixon of LongRifles, Inc. teamed up with O’Neill Ops. The video shows the “Coyote Rifle” build, step by step, from the cutting of the tenon threads, to the 440-yard field test at the end of the build. To learn more about this rifle’s components and its performance in the field, contact James O’Neill, www.oneillops.com, (605) 685-6085.
Chad Dixon of LongRifles, Inc.
Chad Dixon’s introduction to firearms began in 1991 as a marksmanship instructor and competitive shooter in the U.S. Marine Corps. Chad began building rifles in 2000 at the Anschutz National Service Center, where he worked with U.S. Olympic shooters. In 2003 Chad took a position with Nesika Bay Precision/Dakota Arms. After leaving Nesika, Chad deployed to the Middle East as a security contractor for the U.S. Dept. of State. On his return to the USA, Chad started LongRifles Inc., a custom rifle-building company.
Dixon-built rifles combine modern CNC manufacturing methods with traditional expert craftsmanship. Chad’s rifles have won major int’l and national level competitions in Smallbore, Smallbore Silhouette, High Power, and Long Range Palma disciplines.
Share the post "Building a Great Varmint Rifle — Superb Video Shows Process"
At the Berger SW Nationals this week many of the nation’s top sling shooters will be competing in the Palma (full-bore) class. You’ll see a scores of .308 Win Palma rifles on the firing line in Phoenix. However, we doubt any of those Ben Avery rigs will be more eye-catching than this Barnard-actioned beauty in an stunning Turkish Walnut stock…
In our Shooters’ Forum, there’s a long-running thread entitled Pride & Joy Rifles. There you’ll find dozens of fine firearms — from hunting handguns to long-range benchrest rigs. A while back, Forum member John L. (GunDog64) posted this handsome Palma rifle, built by Chad Dixon.
John reports: “Here is my new ‘Pride and Joy’ Palma rifle. The action is a chrome-moly Barnard supplied by MT Guns. The gun is set up for switch-barrel use with two Medium Palma-contour Bartlein barrels, one chambered in 6CM, the other in .308 Winchester. Both barrels feature 5R rifling. Up front is a Riles 30mm front sight, while the rear sight is a Warner. The stock was crafted from a superb Turkish walnut blank supplied by Luxus Gunstocks in Mt. Orab, Ohio.
Gunsmithing by Chad Dixon — Stock Finish by Owner
All gunsmithing and assembly work was performed by Chad Dixon at Long Rifles Inc., Sturgis, South Dakota. Chad designed the trigger guard, handstop rail, recoil lug, and cheek-piece adjuster. John, the rifle’s proud new owner, completed the finish work on the stock. John reveals: “This project was a year in the making but well worth the wait”.
Share the post "Palma Pride — Stunning Turkish Walnut-Stocked Match Rifle"
If you own a Ruger Precision Rifle (RPR), or are considering purchasing one, you should watch this short video from Sniper’s Hide. The Hide’s head honcho, Frank Galli (aka “LowLight”), added some upgrades to his RPR, to enhance looks and ergonomics. Frankly we think the RPR is pretty good right out of the box. Our friend Gavin Gear of UltimateReloader.com is seeing near-half-MOA accuracy with his “box-stock” RPR in .243 Winchester. Nonetheless we know some RPR owners will want to swap barrels or otherwise “hot rod” their rifle. Here’s how it’s done…
Video Shows New Barrel, Stock, Grip and Handguards Installed on Ruger Precision Rifle:
Galli unbolted quite a few factory parts, replacing them with proven aftermarket components. That’s one of the advantages of the RPR — it’s modular nature allows the owner to make changes with simple tools. Off came the handguards, stock, and grip. While we’ve been fairly impressed with the accuracy of some RPR factory barrels, Galli decided to fit a custom barrel, courtesy Chad Dixon of LongRifles Inc. (LRI). All totaled, the new components cost more than the original rifle. Galli figures he now has about $2400 in the gun. A new RPR (if you can find one) will run you about $1100-$1200.00.
The new barrel was a good investment, but the other items could be considered indulgences. But we like the fact that Galli demonstrated how easily the RPR can be modified by anyone with basic mechanical skills. (The Ruger’s barrel-mounting system allows you to run a “Pre-fit” barrel with headspace set by clamping nuts.) CLICK HERE for details of the build.
New Components for LowLight’s Ruger Precision Rifle
Magpul MOE Grip
Magpul PRS Stock
Seekins Precision “Triangle” Handguards
LongRifles Inc. (LRI) Aluminum Bolt Shroud
Custom K&P “Pre-Fit” Barrel from LRI (chambered in 6.5 Creedmoor)
Share the post "Sniper’s Hide Boss Hot Rods His Ruger Precision Rifle"
Just another YouTube video … NOT. This video is a winner. If you want to see state-of-the-art 21st Century rifle-building, with advanced CNC milling operations, watch this clip. It shows how man and machine combine to create a fine custom rifle.
One of the best short features of its kind, this video shows the creation of a high-end, 22-250 varmint rifle from start to finish. All aspects of the build are covered. The rifle was crafted by Chad Dixon for O’Neill Ops. Once the build is complete, the video shows the rifle being tested at 440 yards. With the camera filming through the scope, you can even watch the trace, starting at the 2:36″ time mark (this is very cool).
Watch this Video in HD!
Any person with an interest in gunsmithing should watch this video. It shows barrel profiling, tenon-thread cutting, chambering, CNC stock inletting, bedding, and stock painting.
For this build, Chad Dixon of LongRifles, Inc. teamed up with O’Neill Ops. The video shows the “Coyote Rifle” build, step by step, from the cutting of the tenon threads, to the 440-yard field test at the end of the build. To learn more about this rifle’s components and its performance in the field, contact James O’Neill, www.oneillops.com, (605) 685-6085.
Chad Dixon of LongRifles, Inc.
Chad Dixon’s introduction to firearms began in 1991 as a marksmanship instructor and competitive shooter in the U.S. Marine Corps. Chad began building rifles in 2000 at the Anschutz National Service Center, where he worked with U.S. Olympic shooters. In 2003 Chad took a position with Nesika Bay Precision/Dakota Arms. After leaving Nesika, Chad deployed to the Middle East as a security contractor for the U.S. Dept. of State. On his return to the USA, Chad started LongRifles Inc., a custom rifle-building company.
Dixon-built rifles combine modern CNC manufacturing methods with traditional expert craftsmanship. Chad’s rifles have won major int’l and national level competitions in Smallbore, Smallbore Silhouette, High Power, and Long Range Palma disciplines.
Share the post "Master Gun-Maker (with CNC Mill) Builds a 22-250 Varminter"
In our Shooters’ Forum, there’s a long-running thread entitled Pride & Joy Rifles. There you’ll find dozens of fine firearms — from hunting handguns to long-range benchrest rigs. A while back, Forum member John L. (GunDog64) posted this handsome Palma rifle, built by Chad Dixon.
John reports: “Here is my new ‘Pride and Joy’ Palma rifle. The action is a chrome-moly Barnard supplied by MT Guns. The gun is set up for switch-barrel use with two Medium Palma-contour Bartlein barrels, one chambered in 6CM, the other in .308 Winchester. Both barrels feature 5R rifling. Up front is a Riles 30mm front sight, while the rear sight is a Warner. The stock was crafted from a superb Turkish walnut blank supplied by Luxus Gunstocks in Mt. Orab, Ohio.
Gunsmithing by Chad Dixon — Stock Finish by Owner
All gunsmithing and assembly work was performed by Chad Dixon at Long Rifles Inc., Sturgis, South Dakota. Chad designed the trigger guard, handstop rail, recoil lug, and cheek-piece adjuster. John, the rifle’s proud new owner, completed the finish work on the stock. John reveals: “This project was a year in the making but well worth the wait”.
Share the post "“Pride & Joy” Palma Rifle in Turkish Walnut"
Here’s a great YouTube video that shows the creation of a high-end, 22-250 varmint rifle from start to finish. The rifle was crafted by Chad Dixon for O’Neill Ops. Once the build is complete, the video shows the rifle being tested at 440 yards. With the camera filming through the scope, you can even watch the trace, starting at the 2:36″ time mark (this is very cool).
In our 
Just another YouTube video … NOT. This video is a winner. If you want to see state-of-the-art 21st Century rifle-building, with advanced CNC milling operations, watch this clip. It shows how man and machine combine to create a fine custom rifle.
