Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









December 15th, 2012

No More Excuses — Get a Safe for Your Guns

In light of the tragic events in Connecticut, we strongly urge all readers to secure their firearms so they cannot be accessed by juveniles or mentally unstable persons in the household. If you don’t have a gun safe, get one. Don’t procrastinate because of cost factors — here is an affordable option you can get from Walmart. The $597.00 24-gun Cannon Safe is big enough to hold a large collection of arms and heavy enough that it would be difficult to remove — particularly if it is bolted down. Yes, there are better-built safes. But this $597.00 Cannon is a viable option if you can’t afford anything of higher quality. You want a safe that is big and heavy enough that it can’t be easily hauled off with a hand truck. For more information on Gun Safes, read our Gun Safe Buyers’ Guide

The Cannon Safari Series 24-Gun Capacity gun safe comes with a built-in door panel organizer, electronic lock, and a 30-minute fire rating. The interior is fully lined with lint-free fabric and the bottom is pre-drilled for bolting the safe to the floor. The electronic lock allows the owner to change the combination and a 9-volt battery is changed from the outside. Its door is locked with steel-active locking bolts on the left side and door wraps around the inside right side.

  • 30-minute fire protection rating
  • Internal hinges and expandable smoke seal
  • Adjustable shelving
  • Dimensions: 59″H x 26″W x 22″D (depth includes handle and lock)
  • Model# 5926BLKEDOK

UPDATE: Bulletin Reader Michael found that TractorSupply.com has a similar 60″ x 26″ x 20″ Cannon TS6026E Challenger Gun Safe on sale for just $449.99 through December 18th, 2012. That’s the web price, but if you need delivery you have to add $100.00 for oversized shipping. If you can get to a local Tractor Supply Co. outlet near you and pick the safe up yourself, this may be an amazing deal if the store honors the web price. Don’t dawdle — Sale ends December 18th!

Cannon Safe Tractor Supply Sale

Permalink Hot Deals 4 Comments »
December 14th, 2011

Colt Opens New Factory in Florida and Sells ARs in California

Colt’s Manufacturing Company LLC (“Colt”) announced that it will open a new firearms production facility in Kissimmee, Florida. Colt’s announcement did not discuss plant closures elsewhere, but we expect that some of Colt’s production (and jobs) will be moved from New England to Florida. Colt’s press release states: “The new 16,000-square foot facility will allow Colt’s Manufacturing Company to expand into new markets and business lines in parallel with the company’s existing 100,000-square-foot facility in Connecticut. Specific information on facility renovations and employee requirements will be determined over the course of the next several months.”

Colt Florida

Colt Introduces New California-Compliant ARs
In related news, Colt has introduced a series of California-compliant AR15s. This is good for “black rifle” fans in the Golden State. Colt’s CA-legal ARs include: a 16″ barrel M4 Clone (LE6920CA) with adjustable stock; an Accurized rifle with 24″, 1:8″ twist heavy barrel (CR6724CA), and a “Patrol Rifle” that features Magpul furniture (6920CMP-B). All of Colt’s new California-compliant rifles are test-fired at the factory, and they all have mil-spec barrel, chamber, and bolt carrier group. In addition, Colt’s ARs receive special metal testing. Steve Comus, who reviewed Colt’s new ARs for Western Outdoor News, explains: “There is a magnetic particle inspection test done on all Colt rifles. After a rifle passes the MP (Magnetic Particle) test, MP is stamped on the bolt and barrel, as is C for Colt and MP on barrel. To pass, every single barrel and bolt goes through an over pressure test of 70,000 psi to make sure it can handle high pressure. Colt then takes rifle barrel and bolt and does a magnetic particle test on them. Barrels on mil spec barrels are chrome-lined. Accurized barrels are not chrome-lined.”

CLICK HERE for Full Field-Test of Colt California ARs (12/7/2011). Article from WONews.com.

Colt California compliant AR15

Permalink New Product, News 3 Comments »
March 26th, 2010

Marlin to Shut Down Connecticut Plant and Lay Off 265 Workers

Marlin Firearms LogoMarlin Firearms, now owned by Remington Arms (part of Cerberus Capital Management’s Freedom Group), is going to shut down its North Haven, Connecticut manufacturing facility. This marks the end of a legendary period of gun-making in New England. Marlin has produced firearms in Connecticut since 1870, when the company was founded by John M. Marlin.

A Marlin spokesman indicated that the plant will be closed by June, 2011, and all 265 employees will be terminated via phased lay-offs starting in May, 2010. The Marlin plant closure, announced late Thursday (March 24th), came as a surprise to both Marlin employees and North Haven community leaders. Marlin plant workers reported being “blindsided”. One worker told WTNH Channel 8 that: “We never saw this coming… we were told to attend a mandatory meeting at 3:30… And then boom [that was it].” Remington has not yet issued an official statement about the factory closure, but one insider speculated that the plant was closed to “avoid union wage pressure driving retail cost upward and making the product less competitive in the modern firearms market.”

Marlin is currently head-quartered in Madison, North Carolina. There is no indication that the production of Marlin rifles will be halted — production will likely be shifted to Freedom Group factories in other states. The Shooting Wire reports that: “According to Remington Arms sources, the facility is being decommissioned and the manufacturing relocated to Remington’s Ilion, New York facilities; the Marlin lines are not moving offshore.” The production relocation will apply to Marlin products, and, presumably, to the other brands made by Marlin: Harrington & Richardson, New England Firearms, and L.C. Smith.

Marlin’s founder, John M. Marlin, learned his trade during the Civil war, working at the Colt plant in Hartford, Connecticut. In 1870, according to Marlin’s website, Marlin “hung out his sign on State Street in New Haven, manufacturing his own line of revolvers and derringers.” The Marlin enterprise was purchased by Frank Kenna in 1924, and the Kenna family maintained ownership until Remington acquired Marlin in 2008.

Click Arrow Lower Left to Play Report from WTNH-TV Channel 8 in New Haven:

Permalink - Videos, News 19 Comments »