Match-Winning Rifle: Shiraz Balolia’s .300 WSM F-Open Rig
After Shiraz Balolia (President of Grizzly Industrial) won the F-Open Division at the 2013 Berger Southwest Long Range Nationals, folks wanted to know more about Shiraz’s match-winning .300 Winchester Short Magnum (WSM) rifle. That gun is a great piece of work, we can assure you. The Masterclass stock was extensively customized by Shiraz himself, who is a talented wood-worker (as well as a superb F-Class trigger-puller). CLICK PHOTO to see large “centerfold” shot of rifle.
The rifle features a BAT Machine ‘M’ action, with a 32″, 1:10″-twist Bartlein barrel. Metal work was done by Gordy Gritters. The scope is a March 10-60x52mm, which sits on a +20 MOA angled rail. The primary stockwork, including fitting of the adjustable cheek-piece and buttplate, was done by Alex Sitman of Masterclass Stocks. Shiraz customized the stock with finger grooves, fore-end channel, and a bottom rear slide. Shiraz did the final stock finishing as well.
[haiku url=”http://accurateshooter.net/Video/shirazmemo1.mp3″ title=”Shiraz Talks about F-Open”]
Q&A with Shiraz Balolia
Q: Is the .300 WSM the “next big thing” in F-Open Competition?
Shiraz: The .300 WSM takes a bit to get used to. With more powder you have a bigger bang next to your head, plus you have to deal with the mule kick. My gun recoils so hard that it was coming to rest down on the neighbor’s target. I had to be careful about not cross-firing. Once you get these behind you it can be a very accurate caliber to shoot because of the great .30 cal bullet choices. There were about five .300 magnums in Phoenix, but only one in the top ten. You still have to read the wind!
Q: What’s your match load for the .300 WSM?
Shiraz: I use Norma brass with turned necks. At the Berger SW Nationals I used Berger 215gr Hybrids, Fed 215 LR magnum primers, and a stout load of Hodgdon H4831 SC. This drives the 215s at around 2910 FPS. If that sounds fast, remember I’m using a a 32″-long barrel.
Q: Can you tell us about your chamber and your fire-forming process?
Shiraz: On the .300” WSM [I run] a tight-neck .336” chamber for turned necks. Basically, I fire-form all my brass in a fire-form barrel and save the good barrels for matches. Gordy is so good that he can chamber different barrels to within .0002” in the headspace dimension. That way I can have several same-caliber barrels and can use the same brass for all those barrels. I use a .0005″ shoulder bump for my brass. I load the bullets so that the bearing surface sits above the doughnut ring.
Q: Do You Think Tuners Will Become Popular in F-Class?
Shiraz: Tuners are a double-edged sword. In order to use them most efficiently you need to load test the barrel in many different conditions and record the results, fine tuning and turning the dials to find the best harmonic of that barrel in a given condition. When you encounter a similar condition at a match to what you tested previously, you would look up your notes and turn the dials so that it matches your tested condition. I am over-simplifying this, as it is quite complex and there are many articles about tuners. I do not see tuners catching on in F-Class as 99% of the users would not want to go through the aggravation.
Q: The stock looks highly customized. What special work did you do?
Shiraz: The stock is a Master Class F-Class stock that was highly modified by me. I channeled out the fore-end so the stock would ride on two “rails” on the front bag and not rock. I also added a wide 1.25″ base on the bottom of the stock that rides on the rear bag. There is a matching rear bag with a wide slot in it. The gun slides back and forth nicely and is very stable. I wanted finger grooves that fit my hand so I carefully filed those by hand with a round file, making sure to fit it many times during the process. Once all the modifications were complete I sanded and sprayed the stock with clear UV lacquer. My UV booth cures the spray in minutes. I usually assemble the gun the same day I spray it. As you know, I build guitars as a hobby as well.
I have been looking for a bag that can securely carry a large spotting scope as well as chronograph hardware, wind meter, and camera gear — all the extra stuff I typically take to the range in addition to the essential cleaning and shooting products that go in my regular range kit. The folks at 
Watch the video to see how much stuff will fit in this bag. NOTE: If you carry a tripod or windflag stand using the straps under the case lid, be sure to position the foam padding carefully to prevent any direct contact with a spotting scope in the main compartment. Overall, the 20″ Range Bag is a remarkably capable gear-hauler. With the nicely-padded interior it will safely carry expensive items such as laser rangefinders, and binoculars. There is also a slash pocket on the rear side (not shown in video) that will hold thin items such as target stickers and shooting log-books. The 20″ Range Bag is offered in four (4) different colors: Red, Black, Green, and Camo. Price is $59.95 for solid colors and $61.95 for camo.
