Lyman BoreCam Review by Vince Bottomley

Lyman’s digital BoreCam is one of the hottest rifle/gunsmithing accessories on the market right now. The product sells out quickly whenever a vendor gets a few in stock. Make no mistake, this is a good product that works well, and, at around $300.00, is it affordable for most shooters. The BoreCam provides vital information about your bore and chamber, and has the ability to save images to an SD card.

Our British friend Vince Bottomley recently obtained a Lyman BoreCam and put it through its paces. Vince came away very impressed. He says it is an easy-to-use and very capable bore inspection tool at a fraction of the cost of a high-end optical borescope (such as the Hawkeye). Vince says serious shooters should definitely acquire one of these tools: “In my opinion, this product is one of the very best to come along in recent years and I predict that the demand for these [Lyman BoreCams] will be very heavy. I would advise you to place an order as quickly as possible if you want one.”

READ Full Review by Vince Bottomley for Target Shooter Magazine

Here are highlights from Vince’s review of the Lyman BoreCam: “If I were to replace my [Hawkeye optical borescope] today with another Hawkeye, it would cost me well over £700 – stick on a video adapter and we are looking at four figures. That’s what makes the new Lyman digital borescope so attractive – at around £250 including a monitor – it’s an absolute steal!

But £250 – with a video attachment and photo-capture facility – can this really be a useable borescope? Trust me it is! But what use is a borescope. Why do you need one? Well, whatever you shoot, the condition of your rifle’s bore is critical. And I’m not just talking about a bore that’s ‘shot-out’ – maybe you just aren’t cleaning it thoroughly. Or maybe some defect within the chamber or rifling is preventing your rifle delivering the kind of performance you expect. Even at £700, a borescope can be cost-effective – if it saves you the cost of just one new barrel.”

Vince explained how the BoreCam can quickly diagnose problems in a barrel: “A customer started to have difficulty chambering rounds in his 308 Target Rifle…. The borescope quickly revealed the problem – a hard ring of copper and carbon had built-up immediately in front of the chamber. When you use a bore-guide (and you always should do) it can sometimes ‘protect’ this first bit of the bore from the cleaning-brush. Although the rest of the bore was spotless, this tiny section was not. Once we knew where the problem was, it was simple matter to carefully clean it up.”

“A borescope will tell you if your cleaning regime is effective, or inspect for throat-erosion and the general condition of the rifling. In addition, it’s very useful to the gunsmith for inspecting newly-cut chambers – making sure they are free from scoring and other machining defects.” Vince also recommends using the BoreCam to inspect barrel crowns: “Tiny burrs can often be present on newly-cut crowns and even the minutest of damage to a crown… can play havoc with accuracy. For the serious shooter, you could say that a borescope is the equivalent of a doctor’s stethoscope.”

CLICK HERE to Read Full Review (with detailed Specs and more photos).

The Ugly Truth Revealed
Here are some inside-the-barrel photos Vince took with the Lyman BoreCam. Vince notes: “This barrel came out of the scrap-bin, but someone had actually been shooting this rifle before he finally gave up and came in for a new barrel. Shooting a barrel in this condition is really throwing good money down range! Buy a borescope and stop shooting long before your barrel gets into this state!”