AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.
NRL22 and PRS rimfire competition is hugely popular. And we’re seeing great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire shooting. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for 10 to 20 cents a round. Compare that to $1.00 (or more) for centerfire handloads and as much as $2.00 per round for factory ammo such as Hornady 6.5 Creedmoor.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page.
Modern Rimfire Tactical Rifle with MPA BA Comp Chassis and Vudoo V-22 action.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
This Vortex Nation video features an 80-minute interview with Travis Ishida, one of the original founders of the NRL22 and NRL22-X disciplines. Travis told us that the NRL now runs 7-8 times as many rimfire matches as centerfire matches.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
Share the post "FREE Targets for NRL22 and Precision Rimfire Cross-Training"
AIM SMALL, MISS SMALL: At 25 yards, this is a fun rimfire plinking target. At longer distances it can be a great training target for precision centerfire shooters.
NRL22 and PRS rimfire competition is hugely popular. And we’re seeing great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire shooting. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for 10 to 20 cents a round. Compare that to $1.00 (or more) for centerfire handloads and as much as $2.00 per round for factory ammo such as Hornady 6.5 Creedmoor.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page.
Modern Rimfire Tactical Rifle with MPA BA Comp Chassis and Vudoo V-22 action.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
This Vortex Nation video features an 80-minute interview with Travis Ishida, one of the original founders of the NRL22 and NRL22-X disciplines. Travis told us that the NRL now runs 7-8 times as many rimfire matches as centerfire matches.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
From Popping Paper to Slamming Steel…
After you’ve trained with these printable paper targets you might want to switch to steel. Shooting steel reactive targets is fun as you get instant gratification when you hear the clang and see the steel plate move. This video reviews a NRL22 steel target kit produced by JC Steel targets from strong AR500 steel.
Share the post "FREE Targets for NRL22 and Tactical Rimfire Cross-Training"
The new Tunable Ultimate Recoil Device from MDT allows you to shoot smaller calibers with nearly 3.14 times more recoil. This is a big deal for tactical competitors who want to cross-train with rimfire rifles that use much more affordable .22 LR ammo. (Good .22 LR ammo can be purchased for under $0.15/round.)
With this new MDT reverse-pulse muzzle brake, a .22 LR rig will feel like a .223 Rem, and a .223 Rem can feel like a .308 Win. The added recoil provides realistic training, stressing perfect body position while allowing you to save money on ammo.
Watch Video to See Tunable Ultimate Recoil Device in Action
With very large calibers (.338 and above), the MDT-TURD can increase felt recoil up to 900%. This heavier recoil pulse can help a shooter build muscle strength during training.
Built with marine-grade submarine steel and reverse baffles, the MDT-TURD creates parabolic concussion forward and to the side. The unique patent-pending design removes the need for hearing protection for the shooter while creating disorientation for competitors at your match.
The above image shows a .22 LR tactical rifle on recoil-measuring slide platform. (See Video at 1:15 time-mark). With the MDT-TURD fitted, the rimfire rifle shows significantly greater recoil — 314% more compared to the same rig with bare muzzle. This allows more effective cross-training, as the device-equipped rimfire rifle will have a recoil pulse more similar to a centerfire PRS/NRL rig.
This image show how the forward-angle brake ports INCREASE the felt recoil by venting the explosive energy FORWARD. This effectively pushes the rifle backward, increasing felt recoil. This way a .223 Rem can recoil like a .308 Win, and a .22 LR rimfire rifle can recoil like a .223 Rem.
About MDT ▬▬▬▬▬▬▬▬▬▬▬▬
MDT was born with a single purpose — to provide better value and better accuracy for precision rifles. The first MDT chassis was developed from the ground up based on the needs of shooters. Our engineers verified every function and feature based on the input from competitive shooters. The end result was a game-changing product called the TAC21 that continues to perform at the range, in the field and in competitions around the world.
Today, MDT chassis systems, magazines, and accessories are still developed the same way. We collaborate, question and verify our concepts with precision shooters from around the globe to ensure that every MDT product is designed with the same single purpose — to provide our customers with the absolute best product possible.
Share the post "Tunable Recoil Device Aids Cross-Training with Smaller Calibers"
CLICK HERE for Full Review of Ruger Precision Rimfire by True Pearce of GunsAmerica.com. This particular rifle shot dime-sized groups at 50 yards with CCI Mini Mags and Federal AutoMatch.
Affordable, Versatile, Chassis-Style Rimfire Rifle
There has been a lot of interest in the Ruger Precision Rimfire Rifle, particularly among PRS shooters looking for an affordable, chassis-style cross-training rig. Ruger Precision Rifle owners also favor the .22 LR rimfire “baby brother” because it shares similar ergonomics with the bigger, centerfire RPRs.
The popular Ruger Precision Rimfire rifle is now available in two additional rimfire chamberings: .17 HMR and .22 WMR. This makes the rig more suitable for use in varminting. Both cartridge types, .17 HMR and .22 WMR, also offer higher velocities, less wind drift, and flatter trajectory than the .22 LR. This is a benefit when cross-training. You can shoot at more distant targets with considerably less elevation dialed in your scope. And the windage corrections will be less extreme. We really like the .17 HMR — it’s our favorite rimfire cartridge for small varmints out to 160 yards.
Ruger says: “Faster, flatter and with high-performing bullets, .17 HMR and .22 WMR cartridges expand the capabilities of the Ruger Precision Rimfire platform. Like its .22 LR predecessor, these new magnum offerings maintain the same ergonomics, trigger and manual of arms as the larger centerfire Ruger Precision Rifle.”
Both Ruger Precision Rimfire rifles feature 18″ hammer-forged barrels threaded for muzzle devices, including the Ruger® Silent-SR®. The 15″ free-float handguard with Magpul M-LOK slots provides generous scope clearance and easy mounting of M-LOK-compatible rails and accessories. Like
Like its .22 LR version, the magnum Ruger Precision Rimfire models featured an adjustable bolt throw (that can emulate a centerfire action if desired), along with trigger that adjusts from 2.25 to 5 pounds. The .17 HMR and .22 WMR models ship with a 0 MOA Picatinny rail and one, 15-round BX-15 Magnum magazine or one, 9-round JMX-1 rotary magazine. The BX-15 Magnum is a natural pairing for the new Ruger Precision Rimfire in magnum calibers. It is also compatible with Ruger 77/17®, Ruger 77/22® and Ruger American® Rimfire rifles chambered in .17 HMR and .22 WMR.
Share the post "NEW — .17 HMR and .22 WMR Ruger Precision Rimfire Rifles"
The dots and dashes are Morse Code for the shooter’s initials. The wood is Mango with Walnut fore-end wing inlays. The barreled action is an older Anschutz Model 54 that spent years in a prone stock.
Build Report by Doan Trevor
How do you build a stock for the grand-daughter of an award-winning shooter? Over the years I have built five or six rifles for this shooter, and now his grand-daughter had taken an interest in F-Class. He wanted her new rifle to mirror his own F-Class rifle, and he provided me with an old Anschutz Model 54 barreled action. Her new rifle would get her started in rimfire with the possibility of graduating to High Power (centerfire) shooting. The dots and dashes on the sides of the stock are Morse Code for his grand-daughter’s initials — “AMS”.
Rimfire F-Class Stock Design Factors
Typically when I build a rimfire F-Class stock I use the same pattern as I do for High Power stocks. The pattern has evolved from my prone stocks, as it has proven very successful with time. Also, there is a known issue of using wood for a stock in F-Class. The wood needs to be cured, and unfortunately, finding wood in the specific dimension for the stock is near to impossible. Therefore, I inlay pieces in the fore-end making sure that it is straight and on center. Other materials can be used for an F-Class stock, but keeping them straight and centered can be very difficult. Using cured wood during the build process, I continually check the centerline from fore-end to the rear slider, ensuring that the stock stays centered. This helps ensure good tracking and return to point of aim.
Adapting Prone Stock for F-Class Use
There is a current trend of older Palma and prone shooters to convert their rifles for F-TR and F-Open due to eyesight problems and other disabilities. The stocks that they have been using (and loving) can be recycled to their new shooting styles with a few design changes. I have been doing this successfully for the last several years. Whether it be a new shooter or an older one, you can either plan for the future or adapt older equipment so that all can shoot the style that they want. My philosophy in rifle building is to create every rifle with the potential to win a national or world championship. I am proud to say that I have build rifles for Derek Rodgers, Trudie Faye, Lige Harris, Barry Smith, Eric Rhodes, Kent Reeves, Terry Glen and many more award-winning shooters. And I look forward to many more.
What the Heck is .22 LR Rimfire F-Class?
There is no official NRA F-Class rimfire discipline (at least not yet). However, many F-Class shooters (both F-0pen and F-TR) employ .22 LR rifles for low-cost training. For example, James Crofts practices extensively with his 40X rimfire F-TR rig. In addition, many shooting clubs offer F-Class style rimfire fun matches, shot prone with front rest or match bipod. This rifle was built for an F-Class fun match hosted regularly by the Los Angeles Rifle & Revolver Club (LAR&R).
The photo below displays a different Doan Trevor-crafted rifle, a rimfire benchrest rig with Turbo action. This shows how Doan makes the 3-inch-wide fore-end. Outboard left- and right-side wings are bonded to the central stock material, then the wings are carefully shaped for straightness. Getting the geometry “just right” helps the rig track perfectly.
Share the post "Custom Rimfire F-Class Rifle for a Grand-Daughter"
Are you looking for a .22 LR Rimfire rifle that has the look and feel of a centerfire rig? Then check out the CZ 455 rimfire rifle featuring a black-finished, laminated wood stock. This gun, dubbed the “Varmint Tacticool” by CZ-USA, features a 5-round detachable magazine and adjustable trigger. And recently CZ added a Suppressor-Ready version fitted with a 16.5″ barrel and threaded muzzle.
The original CZ-455 Varmint Tacticool was built as an affordable tactical trainer with the ergonomics and stock profile of a full-size centerfire tactical rig. The Tacticool’s stock looks similar to the Manners Composites stock on CZ’s 455 Varmint Precision Trainer, but the wood-stocked ‘Tacticool’ version is much less expensive. The CZ 455 with Manners stock retails at $940.00 MSRP while the latest suppressor-ready Tacticool model lists for $549.00 MSRP. The $391.00 you save will buy a LOT of ammo (or a scope).
Tacticool Accuracy Demo — Nailing Match-Sticks at 30 Yards — Five for Five
We like the looks of the CZ-455 ‘Tacticool’, and the stock has some nice features. The butt-hook stock has ambidextrous palm swells on the grip and a raised comb to provide a comfortable cheek weld for shooting with a scope. The fore-end features a wide, beavertail swell for greater stability on a front sandbag. There are two (2) sling swivel studs so you can attach both a sling and a bipod.
At $940 MSRP, the CZ 455 Precision Trainer in Manners Stock is much more expensive.
Share the post "Smart Choice: CZ 455 for Rimfire Cross-Training"
Right Click and “Save as” to download printable PDF versions of target.
The popular Ruger Precision Rimfire rifle is now available in two additional rimfire chamberings: .17 HMR and .22 WMR. This makes the rig more suitable for use in varminting. Both cartridge types, .17 HMR and .22 WMR, also offer higher velocities, less wind drift, and flatter trajectory than the .22 LR. This is a benefit when cross-training. You can shoot at more distant targets with considerably less elevation dialed in your scope. And the windage corrections will be less extreme. We really like the .17 HMR — it’s our favorite rimfire cartridge for small varmints out to 160 yards.
