HOME PAGE
Shooters' FORUM
Daily BULLETIN
Guns of the Week
Articles Archive
BLOG Archive
Competition Info
Varmint Pages
6BR Info Page
6BR Improved
17 CAL Info Page
20 CAL Info Page
223 Info Page
22BR Info Page
30BR Info Page
6PPC Info Page
6XC Info Page
243 Win Info Page
6.5x47 Info Page
6.5-284 Info Page
7mm Info Page
308 Win Info Page
FREE Targets
Top Gunsmiths
Tools & Gear
Bullet Reviews
Barrels
Custom Actions
Gun Stocks
Scopes & Optics
Vendor List
Reader POLLS
Event Calendar
HELP PAGE
> Contact Us
> ADVERTISING














Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 18th, 2015

How To Install a Scope on Your Hunting or Field Rifle

scope alignment tactical rifle scope level

Hunting season is right around the corner. That means its time to inspect all your hunting gear, including your scope set-up. A proper scope installation involves more than just tensioning a set of rings — you need to consider the proper eye relief and head position.

scope alignment tactical rifle scope levelIn this NSSF video, Ryan Cleckner shows how to set up a scope on a hunting or tactical rifle. Ryan, a former U.S. Army Sniper Instructor, notes that many hunters spend a small fortune on equipment, but fail to set up their rifle to use the optics optimally. Cleckner likens this to someone who owns an expensive sports car, but never adjusts the seat or the mirrors.

Ryan notes that you want your head and neck to be able to rest naturally on the stock, without straining. You head should rest comfortably on the stock. If you have to consciously lift your head off the stock to see through the scope, then your set-up isn’t correct. Likewise, You shouldn’t have to push your head forward or pull it back to see a clear image through the scope. If you need to strain forward or pull back to get correct eye relief, then the scope’s fore/aft position in the rings needs to be altered. Watch the full video for more tips.

Tips on Mounting Your Scope and Adjusting Your Comb Height:
1. Normally, you want your scope mounted as low as possible, while allowing sufficient clearance for the front objective. (NOTE: Benchrest shooters may prefer a high mount for a variety of reasons.)

2. Once the scope height is set, you need to get your head to the correct level. This may require adding an accessory cheekpad, or raising the comb height if your rifle has an adjustable cheekpiece.

3. Start with the rifle in the position you use most often (standing, kneeling, or prone). If you shoot mostly prone, you need to get down on the ground. Close your eyes, and let you head rest naturally on the stock. Then open your eyes, and see if you are too low or too high. You may need to use a cheekpad to get your head higher on the stock.

4. If your scope has a flat on the bottom of the turret housing, this will help you level your scope. Just find a flat piece of metal that slides easily between the bottom of the scope and the rail. Slide that metal piece under the scope and then tilt it up so the flat on the bottom of the scope aligns parallel with the flats on the rail. Watch the video at 8:40 to see how this is done.

Video find by EdLongrange. We welcome reader submissions.
Permalink - Videos, Hunting/Varminting 4 Comments »
October 5th, 2013

Tech Tip: How to Mount a Scope for a Tactical or Hunting Rifle

scope alignment tactical rifle scope levelIn this NSSF video, Ryan Cleckner shows how to set up a scope on a tactical or hunting rifle. Ryan, a former U.S. Army Sniper Instructor, notes that many shooters spend a small fortune on equipment, but fail to set up their rifle to use the optics optimally. Cleckner likens this to someone who owns an expensive sports car, but never adjusts the seat or the mirrors.

Ryan notes that you want your head and neck to be able to rest naturally on the stock, without straining. You head should rest comfortably on the stock. If you have to consciously lift your head off the stock to see through the scope, then your set-up isn’t correct. Likewise, You shouldn’t have to push your head forward or pull it back to see a clear image through the scope. If you need to strain forward or pull back to get correct eye relief, then the scope’s fore/aft position in the rings needs to be altered. Watch the full video for more tips.

Tips on Mounting Your Scope and Adjusting Your Comb Height:
1. Normally, you want your scope mounted as low as possible, while allowing sufficient clearance for the front objective. (NOTE: Benchrest shooters may prefer a high mount for a variety of reasons.)

2. Once the scope height is set, you need to get your head to the correct level. This may require adding an accessory cheekpad, or raising the comb height if your rifle has an adjustable cheekpiece.

3. Start with the rifle in the position you use most often (standing, kneeling, or prone). If you shoot mostly prone, you need to get down on the ground. Close your eyes, and let you head rest naturally on the stock. Then open your eyes, and see if you are too low or too high. You may need to use a cheekpad to get your head higher on the stock.

4. If your scope has a flat on the bottom of the turret housing, this will help you level your scope. Just find a flat piece of metal that slides easily between the bottom of the scope and the rail. Slide that metal piece under the scope and then tilt it up so the flat on the bottom of the scope aligns parallel with the flats on the rail. Watch the video at 8:40 to see how this is done.

scope alignment tactical rifle scope level

Video find by EdLongrange. We welcome reader submissions.
Permalink Hunting/Varminting, Optics 2 Comments »
April 8th, 2012

Creedmoor Sports Releases New 2012 Catalog

Creedmoor Sports recently released its new 2012 catalog — with 2011 NRA High Power Champion Carl Bernosky on the cover. Last year Carl won his NINTH National High Power Championship*. There is both a traditional print version of the new Creedmoor catalog, as well as a new digital version online. In the online digital catalog, you can flip the pages just like a real catalog, view page thumbnails, and easily print out catalog pages for future reference.

In the new Creedmoor Catalog, we found some cool products you guys may not have seen before. Of course this is just a small sample of the thousands of items in the current catalog.

Malcolm Hi-Lux M73G2 Rifle Scope
Item HL-M73G21, $399.95
Modern repro vintage-style scope ideal for Vintage Sniper Rifle Matches. If you shoot a 1903 Springfield or old Mauser in the sniper matches this is just what you need. Fine cross-hair reticle with multi-coated lenses. The M73G2 features internal 1/2-MOA per click elevation and windage adjustment, with 60 clicks (30 MOA) per full turn. Total adjustment for both Elevation and Windage is 50 MOA each, i.e, 25 MOA up and down and 25 MOA left and right from the reticle’s centered position.

Blank Eyepiece
Item C1038, $6.95
This semi-opaque eye-shield clips on your shooting eyewear on either right or left side. This allows you to shoot with both eyes open, reducing eyestrain and fatigue. For cross-dominant shooters who don’t want to hold their rifle or pistol with their weak-side hand, this device can be very helpful.

Holland’s Scope Level
Item HOL-LEVEL, $49.95
There are many leveling devices on the market, but we think this is one of the best designs yet (when mounted properly). The T-6 aluminum alloy level fits on your scope tube, with the bubble level set to the side for easy viewing when in firing position. The unit, offered in 1 inch, 30mm, and 34mm sizes, can be flipped so you can place the bubble on either the right side or left side. This unit is easier to see with your left eye than levels mounting in the center of the scope.

The Score Keeper and Pit Puller (by Jim Owens)
Item JOSKPP, $11.95 (Book on CD/DVD)
Can you explain the 11 Hit Rule, the Excessive Hits Rule, the Insufficient Hits Rule, and what to do for a withdrawn target? If not, and you compete in High Power matches, you need this DVD. This useful resource can help match directors and score keepers, and it is an effective training tool for new pit workers. The DVD features over 300 color slides and shows scoring situations from both the Pit Puller’s POV and the Score Keeper’s POV.

Anschütz Shaker Pellet Box
Item AHG-1001, $19.95
With this handy item airgun shooters can sort, count and arrange pellets. This is the best set-up for holding 100 match pellets in rows, and protected from damage. (It’s easy to ding the tails of pellets, which can really harm accuracy.) To quickly fill the box, just pour some pellets into the box, press down on the side tabs, and shake gently back and forth. If you sort pellets by weight (or other criteria), you can also place the pellets individually.

*Bernosky has won the High Power Championship in 1977, 1978, 1979, 1980, 1992, 2000, 2007, 2008, and 2011. *In 1981 Carl won the Match Rifle division, but D.I. Boyd, a Service Rifle shooter, had the highest overall Aggregate.
Permalink Gear Review No Comments »