|
|
May 19th, 2010
 Forum member and long-range shooter Jerry Brandon has launched a new company, Ballistics Edge Mfg., which produces cartridge annealing machines for use by home reloaders. Brandon, a talented designer and fabricator, first tried annealing to maintain the quality of his own match brass. Brandon then built and tested a series of prototype annealing machines, working with a variety of brass sizes. Now Ballistics Edge Mfg. offers a full line of four annealing machines: the manually-operated Model 200 ($250), the motorized twin-torch Model 300 ($345), the motorized triple-torch Model 350 ($395), and the motorized Model 400 ($475), a beautifully-machined carousel design.
Brandon’s most versatile machine, and the one he recommends for annealing both normal- and magnum-sized cases, is the Model 350. Like the Model 300, the Model 350 features all-metal construction and motorized case transport. The Model 350 uses three torches rather than the Model 300’s two. The triple-torch system does a better job heating the large-diameter necks on .338, .416 and .50-caliber cases. The triple-torch design also ensures fast, uniform heating of the case-necks on smaller cases. The video below shows the Model 350 in action, annealing jumbo-sized .50 BMG cases.
 For PPC, 6mmBR, and .308-sized cases, you can use the Model 200, the Model 300, or the Model 400. The Model 200 is a simple, one-at-a-time annealer that works remarkably well using a sliding arm. Simply slide the case into the flame, then slide it out after the required dwell time. For the average reloader, the Model 200 may be more than adequate. If, however, you plan to anneal hundreds of cases a week, you may want to consider the beautifully-machined Model 400 carousel, which will anneal 100 cases in less than 15 minutes. The Model 400 features both .308-size and magnum/ultra magnum-size holes to accept both .47X and .56X diameter cases. Just choose the correct size hole and adjust the torch height to match your case. The .75″-thick shell-plate top acts as a heat-sink to protect the lower case body. View the Model 400 carousel annealer in the video below.
Ballistics Edge Website Offers Good Technical Advice on Annealing
Anyone interested in learning about cartridge annealing should visit www.AnnealingMachines.com, Jerry Brandon’s website. There you’ll find a helpful, authoritative discussion of annealing, including the all-important factors of time and temperature. As Brandon observes, much MISinformation about annealing can be found. Brandon will set you straight. Read Brandon’s How to Anneal article and you can avoid making costly (and potentially dangerous) mistakes, whether you anneal manually or use an annealing machine. In the video below, Jerry Brandon reviews the features of Ballistics Edge annealing machines. He also provides some good, basic advice for shooters who are looking to try their hand at annealing for the first time.
Share the post "New Annealing Machines from Ballistics Edge Mfg."
November 4th, 2009
Temperature, Atmospheric Pressure, and Altitude — all these things can and do affect bullet ballistics. Moreover, temperature changes can alter powder performance and chamber pressures. The smart reloader takes the predicted ambient temperature into account. And when calculating your come-ups and windage click values, you need to factor in Temperature, Air Pressure, AND Altitude.
 How do you keep track of these important variables when you’re shooting? The Kestrel 4000 Pocket Weather Tracker®, is compact and provides a wealth of information: atmospheric pressure, altitude, density altitude, temperature, humidity, wind speed, wind chill, dew point, and heat index. We like the Kestrels and recommend them. But at $279.00, a Kestrel 4000 is too expensive for many shooters.
Timex now offers a solution. Selling for about $60.00-$75.00 (street price), the Timex Expedition® Adventure Tech™ watch (item T41501EA) displays Altitude, Barometric Pressure, and Temperature (ABT). The thermometer function records temps from 14° F to 140° F. The Altimeter reads from -2,296 feet to +29,520 feet with 10-foot resolution. The Barometer tracks current and sea level pressure, and provides a graph of pressure changes over time.
Encased in a stainless housing with a resin band, the Timex watch is water resistant to 50 meters, and offers many other nice features, including dual time zones, countdown timer, alarm, and backlit nightlight (very handy). The countdown timer is very easy to set and activate; and yes the timer can be used effectively in a shooting match.
There are other quality watches, such as the Suunto Core, that provide Altitude, Atmospheric Pressure, and Temperature read-outs. But, at under $70.00, the Timex is one-fourth the price of the Suunto. Amazon.com is currently offering the Timex Temp/Altitude/Barometer watch for $62.88. It is offered with a silver band as well as the black shown above.
Useful Tool or Just Another Gadget?
Is this watch really useful or just another piece of male jewelry? Well just last week a friend was developing loads and he wanted to input the ambient temperature, and current air pressure. The Timex gave us the desired data. (Note: it’s best to take the watch off your arm when gauging air temp). For this editor, the Timex ABT watch is a useful tool. I bought one and use it during load development and when shooting competitively. Negatives? Well the Timex IS big and thick, really thick, but then it’s much handier than carrying BOTH a digital thermometer/altimeter AND a separate count-down timer.
Here’s an owner’s review: “I have been through a Nike ABT, a Swiss Army ABT, and a High Gear ABT watch this year alone. None of them, which cost quite a bit more, have been as accurate and durable as this Timex. It has a better fit, was easy to use and read and just plain ‘on the money’ as far as forecasting weather and altitude. Also, I have not had to take it off my arm for 10-15 mins to get a decent temperature rating. It has always been within 1-3 degrees of actual temp. And I live in the Carribean in a tropical climate… so, for it to be this accurate is a statement in itself.”
Share the post "Affordable Timex Offers Temp, Air Pressure, Timer Functions"
September 20th, 2008
Bad things can happen if your barrel gets too hot. First, with some barrels, the point of impact (POI) will shift or “walk” as the barrel heats up excessively. Second, even if the POI doesn’t change, the groups can open up dramatically when the barrel gets too hot. Third, if the barrel is very hot, the chamber will transfer heat to your loaded cartridge, which can lead to pressure issues. Finally, hot barrels wear out faster. This is a very real concern, particularly for varmint shooters who may shoot hundreds of rounds in a day. For this reason, many varminters switch among various guns, never letting a particular barrel get too hot.
How do you monitor your barrel temperature other than guessing by “feel”? Neconos.com offers Bar-L Benchrest strips that visually display heat readings from 86 to 140 degrees. Think of these strips as compact, unbreakable thermometers. With adhesive backing, they can also be used to monitor barrel heating. Put a strip on the side of the barrel and the barrel’s temp will be indicated by a stripe that changes from black to green. There is also a “general purpose” strip that reads to 196 degrees (bottom row). The Benchrest strip (86F to 140F) is in the middle. Bar-L temp strips cost $9.00, or $25.00 for a 3-pack.
Value-Priced Temp Strip 10-packs
If you have many rifles, McMaster.com (a large industrial supply house) offers the same reversible, 7 temperature, 86F to 140F strip (item 59535K13) for $11.86 per pack of ten (10) strips. That’s an excellent value. Thanks to reader Josh B. for this tip!
Controlling Ammo Temperature is Important Too
Keeping your loaded cases at a controlled temperature is vital for maintaining good ES and case life. At a late summer varmint match we observed pressure signs with cases that had been sitting in direct sunlight for about 15 minutes. As we were running a “moderate” RL15 load, the pressure indications were surprising. Testing over a chronograph, cases that had been sitting in direct sunlight showed velocities up to 70 fps higher than those that had been kept in the shade. Using QuickLoad’s temperature function, we calculated from the rise in velocities that case pressures had increased by over 4,000 psi–just from 15-20 minutes in direct sunlight!
Share the post "Keep That Barrel Cool — Temp Strips Display Barrel Temperature"
June 21st, 2008
Temperature, Atmospheric Pressure, and Altitude — all these things can and do affect bullet ballistics. Moreover, temperature changes can alter powder performance and chamber pressures. The smart reloader takes the predicted ambient temperature into account. And when calculating your come-ups and windage click values, you need to factor in Temperature, Air Pressure, AND Altitude.
How do you keep track of these important variables when you’re shooting? The Kestrel 4000 Pocket Weather Tracker®, is compact and provides a wealth of information: atmospheric pressure, altitude, density altitude, temperature, humidity, wind speed, wind chill, dew point, and heat index. We like the Kestrels and recommend them. But at $279.00, a Kestrel 4000 is too expensive for many shooters.
Timex now offers a solution. For about $56.00-$80.00 street price, the Timex Expedition® Adventure Tech™ watch (item T41501EA) displays Altitude, Barometric Pressure, and Temperature (ABT). The thermometer function records temps from 14° F to 140° F. The Altimeter reads from -2,296 feet to +29,520 feet with 10-foot resolution. The Barometer tracks current and sea level pressure, and provides a graph of pressure changes over time.
Encased in a stainless housing with a resin band, the Timex watch is water resistant to 50 meters, and offers many other nice features, including dual time zones, countdown timer, alarm, and backlit nightlight (very handy).
There are other quality watches, such as the Suunto Core, that provide Altitude, Atmospheric Pressure, and Temperature read-outs. But, at under $70 street price, the Timex costs one-fourth the price of the Suunto. Amazon.com is currently offering the Timex Temp/Altitude/Barometer watch for $55.97 – $79.95 (depending on source). It is offered with a silver band as well as the black shown above.
Useful Tool or Just Another Gadget?
Is this watch really useful or just another piece of male jewelry? Well just last week a friend was developing loads for his PPC. While chronographing his loads he wanted to input the ambient temperature, and current air pressure in his log. We just had to guess on those numbers. It felt like 90°+, but it may have been in the mid-eighties. With the Timex we’d have had reliable data (Note: it’s best to take the watch off your arm when gauging air temp). For this editor, the Timex ABT watch is a useful tool. I bought one and will be using it during load development and when shooting competitively.
Here’s an owner’s review: “I have been through a Nike ABT, a Swiss Army ABT, and a High Gear ABT watch this year alone. None of them, which cost quite a bit more, have been as accurate and durable as this Timex. It has a better fit, was easy to use and read and just plain ‘on the money’ as far as forecasting weather and altitude. Also, I have not had to take it off my arm for 10-15 mins to get a decent temperature rating. It has always been within 1-3 degrees of actual temp. And I live in the Carribean in a tropical climate… so, for it to be this accurate is a statement in itself.”
And here’s an interesting comment from one purchaser: “I bought this watch to set the jetting on my racing go kart. I needed to know field elevation, and temperature. Plus changes in barometric pressure as the day went on. Most teams use a weather station and computer that cost over $700 for this purpose. My watch and accompanying chart (for the motor) has given me the same results.” If this watch works for racers, it can work for our “internal combustion” precision bullet-launching machines as well.
Share the post "Timex Altimeter, Barometer, Thermometer Watch"
|
