Seibel’s Slick, 6-6.5×47 Varminter Delivers Speed and Accuracy

A while back, John Seibel, creator of the Varmints for Fun website, put together a 6-6.5×47 Varminter with a Lilja 10-twist barrel and BAT RBRP three-lug action. Richard Franklin smithed the gun using a Model 10 Varminter stock, one of Richard’s own stock designs.

Varmint Loads with 75gr and 87gr V-Maxs
Our Forum readers have asked for recommended 6-6.5×47 Lapua loads for the lighter bullets. Well, John has some useful load data that should provide excellent starting points for 75gr and 87gr projectiles. John writes: “The 75s and 87s will be my main groundpig/varmint rounds. I have worked up loads for all of them but I need to work on the 95s to fine tune them for the egg shoot. I used CCI 450 primers for all loads. They have shown to reduce ES greatly. This case has a small primer pocket and I reasoned with the slower burning powders I wanted to get my velocity as high as possible. I had plenty of H414 and N550 … so that’s what I tried. Velocities and case fullness seemed to be pretty dang good.”

John favored Vihtavuori N550 for the 75 V-Max, while H414 was his powder of choice for the 87gr V-Max. John found these two powders offered near 100% fill density. There are other good powder choices for these bullets. For pure accuracy, you may want to try the 80gr Berger Varmint bullet — it has shot superbly in our 6BRs.