Modular Low-Profile Competition Stocks from Wayne Young

Texas stock-maker Wayne Young has created an innovative modular stock. The fore-end side-plates bolt on to an aluminum sub-chassis so you can alter the width, or run an offset on either side of center. You can transform the stock from 3″ wide to 5″ wide in a couple minutes. Or, if you want to experiment with offset (i.e. having more fore-end width on one side of the barrel than the other side), you can simply remove a few bolts, and stack up the sideplates on one side.

The ability to quickly (and inexpensively) transform a stock from 3″ wide to 5″ wide is a definite plus for shooters who want to use the same rig in both F-Class and benchrest. You can run your rifle at max-legal 3″ width for F-Class, then bolt on additional fore-end “wings” to run at 5″ for bench competition. The 5″-wide stocks are now legal for 600-yard and 1000-yard benchrest, at both IBS and NBRSA registered matches. Those folks who have tried out 5″-wide stocks on Light Guns have been impressed with the results. The extra width stabilizes the rifle on the bags, reducing perceived twist (torquing) and hop. There is less “Rocking and Rolling”. With the gun torquing less, the tracking during recoil normally shows an improvement as well. (But we should say that, even with the standard 3″ width, these stocks track great.)

Video Demonstrates Superior Tracking
How does a Wayne Young stock track? Straight and true — with virtually no hop. You can see for yourself. In the video below, Wayne shoots a test rifle chambered in .284 Winchester, a popular F-Class cartridge. The load is a 175gr Berger XLD bullet pushed at 3010 fps by Reloder 17 powder. That’s a stout, fast load — the recoil force easily meets or exceeds a typical F-Open match load. To better demonstrate the gun’s handling characteristics, Wayne deliberately shoots the gun free-recoil style — without gripping hard or shouldering the stock*. As you can see, the gun recoils straight back. The forearm and buttstock also slide perfectly in the bags, without “grabbing”. (Note: In the video, the rifle’s front bag-rider section is aluminum without polymer “wings”. This particular gun was built with a wider aluminum channel to fit a large-diameter, straight-contour barrel).

Stock Specifications and Design Features
Finished stocks weigh approximately 7 pounds, 4 ounces. If needed, stocks can be lightened to just under 7 pounds. Overall length is 36″. Length of pull is adjustable from 13 to 13.75 inches with standard two-way adjustable butt pad. The main chassis is machined from billet 6061-T6 (Tee Six) aluminum, while the fore-end chassis section is 6063-T5 (Tee Five). The black side sections, fore-end plates, and buttstock lowers are CNC-machined from high-grade HDPE, a rugged, chemically-resistant polymer.

The chassis for round actions features a “V-Block” seating area. There is a flat configuration for Panda and Stiller flat-bottom actions. With either the round- or flat-bottom configuration, actions can be mounted directly on the 1.25″-square aluminum chassis, using supplied action bolts. (Skim bedding is optional.) No inletting, pillar-installation, or stock finishing (painting) is required. Just bolt your barreled action into the chassis and head to the range.

Wayne’s stocks come with two-way adjustable butt-plate, adjustable cheekpiece, trigger guard, and all fasteners. If you consider all that standard equipment and the fact that Wayne’s gunstocks require no inletting and no finishing, these stocks are attractively priced. Wayne’s F-Open/Benchrest Stock, with 3″ fore-end, costs $499.00 plus $25.00 S/H. There is also a $499.00 F-TR version with a fore-end set up for bipod attachment. (Wayne produces an integral, adjustable and removable F-TR bipod for $75.00.) Add $100.00 extra if you want the aluminum components hard-anodized. With long actions or Savage actions, there is an extra charge to configure the central chassis to fit. For more information visit WaynesGunstocks.com or call (210) 288-3063 from 8:00 am to 4:30 pm Monday through Friday.

Similar Posts:

• Go BIG: Wider Stocks for Mid-Range and Long-Range Benchrest
• Super-Wide Forearms Add Stability to Benchrest Rifles
• Hammerhead Stocks for Long-Range Benchrest
• MDT Offers Field Stock for CZ, Savage, and Tikka Rimfire Rifles
• New Sako S20 Hybrid Rifle with Interchangeable Stocks

Tags: Aluminum, F-Class, F-TR, Gunstock, Modular, offset, Texas, Wayne Young, Wayne's Gun Stocks