Adapt .308 Precision Mic for 6BR Family and 6.5×47 Cartridges
The $52.99 RCBS Precision MIC is a well-made and useful tool for measuring cartridge headspace and bullet seating depth. The Precision Mic measures from a datum point on the case shoulder to the base. Unfortunately the Precision MIC is not specifically made for the 6mmBR Norma, 22BR, 6XC or 6.5×47 Lapua cases. Don’t despair. Reader Caduceus devised a clever way to adapt a .308 Win Precision Mic for short cases that match the .308 Win in rim diameter and case body diameter. He simply creates a spacer out of a pistol cartridge. He trimmed a 9mm case to 0.511″ and “found this to be a perfect fit which gave a zero micrometer reading when the FL-sized 6BR case was placed in it.” We expect many readers already own a Precision Mic for their .308s. Now you can adapt this tool for the 6BR family of cartridges, for no extra cost. Cut the spacer shorter for the 6.5×47 Lapua and 6-6.5×47 cartridges.
How to Use the Precision Mic with a Spacer
Caduceus explains: “I can use the .308 version of the RCBS Precision Mic to compare brass which has been fully sized in my 6BR body die with brass which has been fired in my chamber. With the spacer inserted, FL-resized cases mic 0.000″ at the datum point on the shoulder. Using the same set-up, fire-formed cases measure +0.005″. In other words, my chamber has a headspace of +0.005″ above minimum dimensions. This is fairly typical of a custom rifle set up for switch-barrel use. If I were to FL-resize my brass down to minimum spec each time, this excessive working would shorten its life-cycle and might lead to case head separation. Now that I know the headspace of the chamber, I can substitute the standard shell holder on my press with a Redding +0.004″ competition shell-holder. This ensures that my cases only receive 0.001″ of shoulder set-back.”
Click HERE for a full article explaining how to adapt an RCBS Precision Mic for use with a 6BR. You can do the same thing with a 6XC or 6.5×47 case–just cut the spacer to a shorter length (for an 0.000″ mic reading). Note: You can also use this procedure with an RCBS .243 Winchester Precision Mic.
Similar Posts:
- Adapting RCBS Precision Mic for 6BR and Similar Cases
- Cartridge Headspace — Understanding the Basics
- Cartridge Headspace 101 — Understanding the Basics
- How to Understand Headspace — What You Need to Know
- Headspace — How to Measure This and Set Dies Accordingly
Share the post "Adapt .308 Precision Mic for 6BR Family and 6.5×47 Cartridges"
Seems like an awful lot of trouble to get a Precision Mic to work, where a Stoney Point/ Hornady LnL insert will do the same thing with no improvisation… for less money. Or if you want to get picky about shoulder angles, the newer Sinclair inserts…
Just get a Stoney Point.
I would agree with Monte and my gunsmith just cuts me a cheater gauge by reaming the barrel stub that is removed prior to crowning a new barrel.
So, how do you cut the case? Dremel?