For many riflemen, reading the wind is the toughest challenge in long-range shooting. Wind speeds and directions can change rapidly, mirage can be misleading, and terrain features can cause hard-to-predict effects. To become a competent wind reader, you need range-time and expert mentoring. In the latter department, Frank Galli, founder of Sniper’s Hide, has just released a new digital resource: Wind Reading Basics for the Tactical Shooter.
Wind Reading Basics is much more than an eBook — it has charts, instructions for ballistic calculators, and even embedded videos. Galli explains: “We break down the formulas, walk you through using a ballistic computer, and give you all the information in one place. From videos, to useful charts, we make it simple to get started. It’s all about having a plan, and we give you that plan.”
Galli’s Wind Reading Basics, priced at $11.99, can be downloaded from iTunes for iPads, iPhones and iOS compatible devices. Here are sample sections from the eBook (which includes videos):
Gunsmith Nat Lambeth (“RustyStud” on our Shooters’ Forum) offers the following advice for readers who need to ship rifles or major gun components (actions, barrels etc.) to gunsmiths or repair facilities.
You have several options when shipping your guns to and from a gunsmith. Nat Lambeth has tried them all and had problems with them all. Here are some pointers:
1. Always package your unloaded firearm so that it is not loose and can’t work itself loose during transport. I recommend, at minimum, you use a hardcase inside a cardboard box. You can order a hard case from any of the major gun gear web vendors or get one at Walmart. It will come in a nice cardboard box. Just open the end and slide it out. Put your gun in the plastic hard case (after oiling the metal parts) and slide it back into the box. Then tape and relabel the box. Make sure marking on the box does NOT identify the contents as a gun. (You may be required to identify the contents to the shipping company or U.S. Postal Service clerk however.) For a very expensive gun, consider using a wood shipping crate. I will be making some shipping cases from plywood and foam line them. I will have to charge my customer a deposit and when they return the shipping crate I will return their deposit.
2. Pack individual components carefully, and enclose them in separate bubble wrap (or styrofoam) if there is any chance the parts can contact one another. Your editor had an experience where the finish of a fine, blued handgun was ruined because the repair facility had placed old, replaced trigger parts loosely in a foam-lined case with the handgun. During shipping these spare parts worked back and forth, gouging and scratching the pistol.
3. Confirm the recipient’s address BEFORE you ship. Individuals and businesses change locations all the time. Don’t assume an address you used a few months ago is still valid. It’s tempting to use old addresses that are pre-configured in the UPS or Fedex web-based shipping programs, but you should always confirm address validity prior to shipping.
You probably know by now that David Tubb has introduced a new two-stage trigger for Remington 700 rifles, the Model T7T. Priced at $385.00, the new T7T Trigger is a true two-stage design: first and second stages are independently adjustable for both weight and feel. Overall (combined stage) trigger pull weight can be adjusted from just under 1 pound to slightly over 3.5 pounds.
If you are interested in the 7ZT, watch these two videos. The first shows how to adjust pull-weights for both stages. The second video shows how to modify your stock to provide clearance for the T7T.
This video shows how to adjust the new Tubb T7T two-stage trigger for Remington 700s:
If you have an interest in historic arms, or just enjoy a diversion from the world of precision centerfire rifles, muzzle-loaders can be fun. There are also many states where hunters with muzzle-loaders enjoy a longer (and/or earlier) hunting season.
If you want to learn more about muzzle-loaders, the NRA and the National Muzzleloading Rifle Association have created an excellent new book, the NRA How-To-Series on Muzzleloading. This 132-page handbook ($12.00) covers muzzleloading safety, fundamentals of muzzleloader shooting, black powder basics, shooting positions, cleaning, storage and more. The “how-to” guide covers rifle, pistol, and shotgun muzzle-loaders.
The How-To book is a good starter publication for anyone interested in muzzle-loaders. Along with the book, the NRA recommends that novices attend a muzzleloading course to learn safe shooting practices from qualified instructors.
Some folks think you need a new (or nearly-new) barrel to win a benchrest match. That may be true in the centerfire game, but in the world of rimfire benchrest, things are different. Good barrels can remain accurate for a long, long time. That was demonstrated by our friend Joe Friedrich who recently set a new ARA 4-target Aggregate record. Joe was shooting his trusty old “Sweet Pea” rifle with a very well-worn barrel. In fact, Joe’s record-setting Benchmark barrel has logged well over 100,000 rounds. That’s right, a barrel with over 100K rounds shot the best 4-target ARA Agg ever. Will wonders never cease…
In this video, Joe talks about his rifle, the amazing longevity of his Benchmark barrel, and the ELEY ammo he used to shoot two 2500s on the same day (with a 2475 average for four targets):
The Remington 700 is the most popular bolt-action rifle in America, at least according to Gunbroker.com sales figures for new and “previously-owned” rifles. So, chances are that you (or a close family member) may have a Rem 700 of some vintage sitting in the gunsafe. But do you have a copy of the latest Remington 700 product manual in digital PDF format? Probably not. And do you have the official Rem 700 factory target? Again, probably not.
Most of us have a single-stack pistol in our collection. If you want to see how quickly (and accurately) a single-stack can be shot, check out the two videos below showing Jessie Duff at the 2015 Single Stack Nationals, a big event with 400+ competitors. Jessie won the 2015 Ladies’ Division Single Stack Championship this past weekend. The victory marked Jessie’s third straight Single Stack Nationals title. Duff secured her “Three-Peat” with a dominant performance, winning 8 out of 14 stages!
With the end summer, the shooting season in full swing. When you head to the range you’ll want to be prepared. That means collecting all the gear you’ll need at the range. It’s easy to forget small, critical items, so we’ve provided a checklist of the small “extras” you should pack before you head out to the range. In addition to rifle, rests, ammo, targets, and cleaning gear, here are a dozen essentials you should include in your range bag.
• Shell-Holder — If you don’t have calipers, you can use a shell-holder to check for excessive case expansion from hot loads. If a fired case doesn’t slip into the shell-holder easily, your load is definitely TOO HOT.
• Extra Earplugs — Always use ear protection when shooting. We bring a 35mm film canister with extra sets of foam earplugs.
• Hex Wrench or Screwdriver for action screws — Action screws can work loose with time. Always bring the appropriate hex wrench or screwdriver whenever you go to the range.
• Small Wrench for Scope Rings — Check the tension of your scope base and ring fasteners before you go. Bring along a small Torx wrench for the ring screws (or other tool that fits your fasteners).
In the not-too-distant future, U.S. military snipers may be able to steer bullets right to the target, thanks to DARPA, the Defense Advance Research Projects Agency. Believe it or not, DARPA has developed a guided .50-caliber projectile fired from a conventional rifle action. DARPA’s Extreme Accuracy Tasked Ordnance (EXACTO) system combines a maneuverable bullet and a real-time guidance system to track and steer the projectile to the target. Inside EXACTO bullets are optical guidance systems, aero-actuation controls, and multiple sensors. The top-secret technology permits the trajectory of the bullet to be altered in flight, allowing the bullet to move left or right, or even fly in an arc around an obstacle.
Here’s an interesting product, offered by Creedmoor Sports. The innovative MOA Tactical Shooting Bag (MOA TSB) combines plastic pellets with an inflatable, inner air chamber to provide a very lightweight (and adjustable) rear support for your rifle, when shooting prone. Designed for “tactical” shooters, we think the MOA bag would work equally well for hunters and varminters. Costing $59.95, the MOA inflatable bag is priced competitively with basic rear sandbags, but it weighs much, much less than a leather or cordura bag filled with sand.
These MOA bags are built tough, with a durable inner air bladder, surgical-quality tubing, and rugged outer fabric. To help stabilize the bag, lightweight polymer (plastic) pellets are used inside. The air pump then inflates the air bladder to the degree of hardness/softness you prefer. An air valve allows you to deflate the MOA bag for more compact transport and storage.
With the end summer, the shooting season in full swing. When you head to the range you’ll want to be prepared. That means collecting all the gear you’ll need at the range. It’s easy to forget small, critical items, so we’ve provided a checklist of the small “extras” you should pack before you head out to the range. In addition to rifle, rests, ammo, targets, and cleaning gear, here are a dozen essentials you should include in your range bag.
• Shell-Holder — If you don’t have calipers, you can use a shell-holder to check for excessive case expansion from hot loads. If a fired case doesn’t slip into the shell-holder easily, your load is definitely TOO HOT.
• Hex Wrench or Screwdriver for action screws — Action screws can work loose with time. Always bring the appropriate hex wrench or screwdriver whenever you go to the range.
Here’s an interesting product, offered by 
