|
|
January 18th, 2015
Can you fill a 30-round AR15 magazine in the blink of an eye — less than half a second? Well watch this video to see how it’s done, using the Israeli-designed Maglula Range BenchLoader™. In fairness, it takes about 20 seconds to fill the cleverly-designed device with thirty 5.56x45mm cartridges, but once they’re in place, a quick swipe of the hand is all it takes. Thirty rounds are zipped into the mag in 0.3 seconds (by our stopwatch). Don’t believe us? Watch the video. The magic happens at 0:42 and again at 1:17. Don’t blink — you’ll miss it.
CLICK HERE to Download Product Spec Sheet.
Maglula Benchloaders are rugged CNC-machined tools designed to load 5.56/.223 Rem magazines in a single hand stroke. In the video below, a manufacturer’s rep demonstrates the speedloader, along with the “Lula” lever-action plastic loader/unloader.
Frankly, we prefer using the original straight 10-round and 20-round magazines in our ARs since they extract easier and feed flawlessly. But, if you use 30-round mags for 3-Gun matches or other tactical disciplines, these Benchloaders look like they can really speed up the loading process.
January 18th, 2015
Editor’s Note: We originally ran this story in 2010. Since then we have had many reader inquiries about using .22-250 Lapua brass for a 6mm cartridge. Well our friend Robert Whitley worked hard on that concept a few years back, when Lapua .22-250 brass first became available. He came up with a nice 30°-shoulder wildcat that matches the accuracy of the best mid-sized 6mm cartridges. Read all about Whitley’s 6mm-250 Imp 30 below.
 Our friend Robert Whitley of 6mmAR.com has come up with a new, accurate 6mm wildcat based on the new Lapua .22-250 brass that has just started arriving. Robert provides this report:
“I just received a box of the new Lapua .22-250 cases — beautiful brass! My real desire with it was to make it into a 6mm version, preferably something that was ‘no neck-turn’ with a .308 Win-type body taper that would work well in bolt gun and semi-auto magazines and would have a capacity to allow superior velocities. I considered the 6XC, but since you have to bring a whole lot of the shoulder of the brass up into the neck (when you re-form the brass from .22-250 to 6XC) that would necessitate neck-turning it because with Lapua brass the shoulder metal is thicker than neck metal of the brass.
I wanted a simple ‘neck it up and shoot it’ approach so I made up a 6mm-250 Improved 30 cartridge (i.e. 6mm-250 Improved with a 30 degree shoulder) and this thing works great — just neck up the brass, load it and shoot it! The case is like a 6XC with a .030″ longer body and a .030″ shorter neck, which works out fine if you are going to be shooting mainly the 105-108 gr bullets (which it will do very well shooting 2950 – 3000 fps). If you want to hot-rod things, which I do not, I am certain the case can push the 105-108 gr bullets a fair amount faster.
I set it up and throated the reamer for the Sierra 107s and the Berger or JLK 105 VLDs (i.e. a .090″ free bore on the reamer) and it works great with them. If I was going to use it with the Lapua 105s or the Berger 108s I would add about .025″ – .030″ to the freebore of the reamer (i.e. make the freebore around .115″ to .120″).
The great thing is you can use a 6XC die set for it without modification, and all you need to do is keep the dies about .030″ up off the shell holder from their normal position and use them as is. You can make a spacer washer about .030″ thick that you can put on and take off the 6XC dies and use the dies for both cartridges (i.e. 6XC and 6mm-250 Imp 30).
 6mm-250 Imp 30 Shows Great Accuracy
Fire-forming loads are real accurate. Here is a 10-shot group I shot prone at 100 yards shooting fire-forming loads with it — the group is the size of a dime. For fire-forming I use a milder, but still very accurate load: 32.0 grains of N140 with a Sierra 107 and a BR2 primer. For fire-formed cases you can jump up to N160 (around 38-40 grains — depending on lot) and it will push the 105-108 gr bullets real accurately in the 2950-3000 fps range, with low ES and SD. This cartridge has a neck length of .268″ which is plenty long for a 6mm shooting bullets with varying bearing surface lengths. The reamer diagram (link below) leaves about a .003″ neck clearance over a loaded round, which seems to work out very well for a ‘no-turn neck’ set-up.
So there you have it … the 6mm-250 Imp 30 is simple, easy to make, accurate as all get out, there are available factory die sets you can use, and it uses great new Lapua brass — what’s not to like!”
CLICK HERE to download Whitley 6mm-250 Imp 30 Reamer Print.
January 17th, 2015
Gear Report by Kip Staton
Magpul jumped feet-first into the bolt-action precision rifle market by dropping a teaser video of their Hunter 700 chassis/stock system. Feast your eyes on this video that shows Magpul’s new chassis system in action:
The Hunter 700 (MSRP $259.95) is built around a ruggedly anodized aluminum bedding block, and utilizes a standard Magpul SGA cheek riser and spacers (from the shotgun line). It also features forward M-LOK slots, as well as multiple points to mount swivel studs and QD sockets. Weight is a svelte 2.9 pounds, and the system is compatible with factory Remington 700 bottom metal. And that’s not all.
By removing a spacer in the stock, end-users can convert the rifle to feed from the company’s new steel/polymer Bolt Action Magazine Well, which accepts standard AICS pattern magazines. MSRP for the conversion is an impressive $69.95, and that price even includes a mag. But — hold on — it gets even better (look at the photo carefully).
Yup. It feeds from PMAGs. New, AICS-compatible PMAGs. The PMAG-5 7.62 AC is a fully-featured polymer magazine, with an anti-tilt follower and MSRP of $34.95. Interestingly, the magazine holds five (5) rounds to comply with hunting regulations, but the follower features a trimmable, pre-scored stop that allows users to increase capacity by a single round for other purposes.
Magpul promises that this is just the beginning for their precision rifle accessory line, hinting at a larger-capacity PMAG-10 7.62 AC in the future, as well as other calibers. Anybody running AICS pattern mags (and that’s quite a few serious precision rifle guys) should be stoked about these new products.
 About the Writer
Kip Staton is a freelance gun writer based in North Texas, and loves to blog about news within the firearms industry and his perceptions on marksmanship at KipStaton.com. He served as the weekend range manager of the North Texas Shooter’s Association from 2010-2012, at which point he began performing sales consultations for a major online firearms retailer. Currently, Kip is a content marketer, copywriter and digital strategist for an award-winning Dallas marketing agency.
To read more gear reviews by Kip, visit KipStaton.com.
January 16th, 2015
Magnified Optic + Laser RF + Ballistics Computer. What if you could combine all that in a single, compact package. Impressive eh? Well Steiner-Optik (a Beretta-owned company), has done that. Steiner just announced its new “Intelligent” Combat Sight (ICS). The 6x40mm ICS, a true electro-optical aiming device, provides trajectory compensation by automatically calculating the point of aim based on ammunition ballistics, measured distance, and angle to the target out to 800 meters. The ICS combines a 6X optic with a laser rangefinder and a microprocessor-controlled ballistics solver.
Function Similar to Burris Eliminator
Steiner’s ICS is not the first integrated scope/LRF/ballistics calculator. The Burris Eliminator has been around for a few seasons, and it works much the same way. A laser senses the distance to the target, the required hold-over is calculated, and a red dot appears in the scope view. Put the dot on your target and pull the trigger. So Steiner isn’t bringing us something really new, it is just providing this technology in a smaller, ruggedized, waterproof package. (Steiner claims the ICS is waterproof down to 1 ATM – 10 m, which is actually pretty impressive.)
Ballistics Profiles for 7.62x51mm, 5.56x45mm, .300 BLK, .300 WinMag
While the magnification is optimized for the 7.62X51mm (.308 Win), the ICS’s internal ballistic calculator offers settings for other popular chamberings: 5.56x45mm, 300 Blackout, and .300 Win Mag.
The new ICS is easy to use according to Steiner VP Tom Frane: “Just feed the ICS your cartridge’s ballistic info and the scope’s computer and inclinometer instantly calculate perfect hold-over at your exact distance and gives you a bright red dot in seconds — all at the push of a button.” The 6x40mm ICS offers 120 MOA of total elevation. The illuminated reticle adjusts from dim to bright for daylight conditions. A Picatinny base on top of the ICS allows for the addition of a CQB sight, and there is a back-up iron sight on the right side of the unit.
January 16th, 2015
It may be cold and wintry in Camp Perry, Ohio. But it’s warm inside — inside the Gary Anderson CMP Competition Center that is. And dozens of competitors will be there for the next three days (Jan. 16-18) at the Ninth Annual Camp Perry Open Air Gun Tournament.
The Camp Perry Open is one of the biggest mid-winter air gun events in the nation. This year’s match will include a three-position air rifle competition, a 60-shot standing air rifle event, a 60-shot Air Pistol event as well as a Clinic. The 3X20 plus final three-position air rifle competition will take place on Friday, 16 January 2015. A clinic for interested junior shooters will be held on Saturday afternoon. The 60-shot international events will be fired on Saturday and Sunday (January 17th and 18th).
Electronic Targets with Results Streamed Online
The Gary Anderson Center boasts state-of-the-art electronic targets that record scores the instant each shot is fired. Shot-by-shot feeds are then displayed online through as Live Target Images that can be viewed anywhere there is an Internet connection. CLICK HERE to See Live Target Feeds
How Electronic Targets Work
Each electronic target is equipped with four microphones — one in each corner of the target. As the pellet strikes the target, it generates a sound wave that propagates to the microphones. The sound waves are used to determine the shot location by calculating the amount of time it takes for the sound to reach the microphones. That’s physics so the results are precise — machine-calculated shot locations are accurate to one hundredth of a millimeter.
January 15th, 2015
After we posted Erik Cortina’s video featuring the trimming of 7mm Shehane cartridges with a Giraud Power Trimmer, many of our readers asked: “What’s a 7mm Shehane? How does it differ from a standard .284 Winchester?” To answer that question, we’re reprising a “cartridge profile” we ran a couple seasons back. This talks about the qualities of the 7mm Shehane, and includes a reamer print. The 7mm Shehane is an excellent “upgrade” to the .284 Win. The added capacity may not seem like much, but it allows some Shehane shooters to reach a higher, optimal velocity node.
 7mm is the caliber to beat in F-Class Open Division (though many guys are looking hard at the big 30s.) With a standard .284 Winchester, or better yet, a .284 Improved, you can drive the high-BC Berger 180gr bullets to competitive velocities. A .284 Improved will shoot well inside a 6.5-284, and you’ll probably get significantly longer barrel life (at least 1800 rounds vs. as little as 1200 for the 6.5mm).
The straight .284 Win is a good cartridge, but in most barrels, it can’t push the 180s at 2900-2950 fps velocity levels*. A lot of barrels will top out at about 2850. That’s where the .284 Shehane comes into play. The .284 Shehane is a slightly modified wildcat that retains the same 35° shoulder as the parent case. However, by blowing the sidewalls out 0.010″, the .284 Shehane picks up about 3.3 grains of extra case capacity. That enhancement makes a BIG difference. The extra boiler room is enough to drive the 180s at 2900-2950 fps with H4831sc. With N560 or Reloder 17 you can go even faster.
Scotland’s Grant Taylor used the .284 Shehane to finish 3rd overall in the 2009 individual F-Class World Championships at Bisley, England. Grant reports: “I have a .284 Shehane and it’s very accurate with superb vertical spreads at 1000 yards. I have to thank Jim Hardy for putting me onto the caliber, it has awesome accuracy. I’m getting 2930-2950 fps with spreads in the 3-5 fps range. I use Hodgdon H4831sc powder, CCI BR2 primers, and pointed 180gr Bergers.”
Forum member Jim Hardy has shot the .284 with great success. He tells us: “In my humble opinion, the .284 Shehane is the best balanced long range round there is — bar none. I (perhaps_ have shot more of this chambering than anyone else, and it has proven better than I ever expected. Here is why:
You have to shoot a 30 Cal magnum with a 240gr bullet to equal the performance of most 7mm chamberings with the 180 Berger VLD. With the .284 Shehane, you have a .308 bolt face, medium action, and Lapua brass. You use less powder than the 7 mags, and have great accuracy and ballistics even while fire-forming. The .284 Shehane shoots inside the 6.5 AND the straight 284, the 300 WSM, and the 300 Win Mag with less recoil. The .284 Shehane offers twice the competitive barrel life of the 6.5-284, an easy 2950 fps with H4831 SC, [and it] can run 3000+ with N560 and Reloder 17, which is right there with the 7mm WSM. What is not to love about the 284 Shehane? It is a no-brainer for long range — F-Class or Prone or 1000-yard Benchrest.”
*Some exceptional barrels chambered in straight .284 Win can reach 2900 fps with the 180s. Ryan Pierce, who recently set a 450-24X Pending F-Open record, has a 32″ Brux barrel that is delivering 2900 fps with the straight .284. However, Ryan acknowledges that his velocities are not typical: “A lot of .284 Win barrels top out at around 2850 fps with the 180s.”
January 15th, 2015
Is that target good enough? Yes that’s really five (5) shots. This amazing group was shot, in competition, with 6 PPC cartridges loaded with Accurate LT-32 powder. If you’d like to try out this powder in your rifle, Western Powders has released loading data for the LT series of powders. LT-32 is a good choice if you’re currently using propellants with burn rates similar to Vihtavuori N133 or Hodgdon Benchmark powders. (Caution: NEVER simply substitute loads powder for powder. Always start low and work up when trying a new powder). The other powder in Accurate’s LT series, LT-30, has a burn rate similar to Hodgdon H4198. LT-30 is a superb performer in the 30 BR cartridge. LT-30 also is a good choice for small varmint cartridges such as the 17 Rem Fireball.
Download FREE Reloading Guide for Accurate and Ramshot Powders
You can also download the complete Western Powders Reloading Guide in PDF format. This covers Accurate and Ramshot propellants.
January 15th, 2015
Story by T. Logan Metesh for NRABlog.com
Since beginning in 1979, SHOT Show has become one of the premier firearms industry event of the year. As I was packing up amazing and historic guns from the NRA Museums for SHOT Show, I was led down a path of historical whimsy — what would SHOT Show have been like 160 years ago in 1855?
 All of the today’s household names in firearms would have been in attendance: Remington, Colt, Smith & Wesson, Winchester, and others. Some of them were already well established; others were on the edge of greatness. Eliphalet Remington (right) would have been there. Already a well-known and respected businessman, he would have been representing the company he founded 39 years before in 1816.
Samuel Colt would have been in very good spirits. He had just renamed his company — Colt’s Patent Fire Arms Manufacturing Company — and had broken ground on a new factory that would open the following year in 1856. His revolver patent was also set to expire in 1856. Colt had recently fired Rollin White, a trivial matter at the time, but it would come back to haunt him.
Horace Smith and Daniel Wesson would have been there, too. At this point, the now-venerable firearms company had only been a partnership for three years. They would likely have been joined by one of their investors, Oliver Winchester, and showcasing their lever-action “Volcanic” arms.
Very shortly, Winchester would buy Volcanic, Rollin White would patent a bored-through cylinder that Colt had rejected, and Smith and Wesson would form Smith & Wesson Revolver Company utilizing White’s new patent.
As you can see, many of the technologies we consider antiquated were, at the time, revolutionary. Some of the designs we take for granted today were in their infancy in 1855.
Other lesser-known (and less successful) gunmakers hoping to capitalize on their new products would have been there as well. After all, there’s no better place to unveil new designs than at SHOT Show!
Thomas Wright Gardener Treeby (often known as T.W. Treeby) would likely have been at SHOT Show displaying his new 14-shot, .54 caliber chain rifle. Designed in 1854 and patented in 1855, these rifles were made in an attempt to create a successful repeating rifle design. The British military tested the gun with a 30-round chain, but the idea never caught on.
Rare, Antique Firearms on ForgottenWeapons.com
See the Treeby Chain Gun and other rare firearms on ForgottenWeapons.com. It is believed that only two Treeby Chain rifles were ever made. The 14 chain-linked “chambers” rotated into place via a sprocket (like on a bicycle), and each had a separate percussion cap. Watch this ForgottenWeapons.com video to see how it worked.
January 14th, 2015
Handgun owners have debated the comparative merits of the 9mm, .40 S&W, and .45 ACP cartridges for decades, ad nauseum. If one focuses on downrange energy, there IS an answer to the age-old 9mm/40SW/45ACP debate, namely “none of the above”. Bottom line, if you really want the most powerful, widely available semi-auto handgun cartridge, the 10mm Auto beats the other three contenders. Don’t just take our word for it — check out the ballistics comparisons on GunData.org:
9mm vs. .40 S&W Summary and Ballistics | .40 S&W vs. 10mm Auto Summary and Ballistics
The .40 S&W has more energy than the older 9mm Parabellum cartridge, but the .40 S&W is trumped by the larger 10mm Auto. In fact, the .40 S&W is actually just a “detuned”, shortened 10mm. The .40 S&W was developed when the original 10mm Auto proved a bit too snappy for FBI agents.
Fans of the original hard-hitting 10mm Auto, have reason to celebrate. Now one of the great semi-auto handguns, the Sig P220, is available in 10mm Auto. “A 10mm version of the legendary P220 is at the top of the list of ‘most requested products’ from fans of our products,” said Jeff Creamer, Executive Director and General Merchandise Manager for SIG SAUER, Inc. “We heard the demand, and created a P220 that will make full use of the cartridge’s potential.”
Four different 10mm P220 models will be offered, all with 5˝ barrels. There will be one DA/SA model and three single-action-only (SAO) models. The Match Elite Reverse Two-Tone P220 is the one DA/SA model. It features match sights, G-10 grips, an Elite Beavertail, and a stainless finish with front cocking serrations
The Stainless Elite P220 and Stainless Elite Nitron® P220 are single-action only pistols featuring the Elite Beavertail, Siglite night sights, and front cocking serrations. Last but not least, the SAO “Hunt Ready” P220 comes with Sig Sauer Romeo1 mini red-dot sight installed, black G-10 Piranha grips and a Kryptek® Highlander camo pattern finish.
Sig Sauer Introduces 10mm Auto Pistol Ammo
To feed its new 10mm P220s, Sig Sauer will offer two new types of 10mm pistol ammo: 1) 180gr Elite Performance Full Metal Jacket (FMJ) target load; and 2) 180gr Elite Performance V-Crown™ Jacketed Hollow Point (JHP) and for self-defense and hunting. “We are pleased to add this accurate, powerful round to our Elite Performance Ammunition line,” said Bud Fini, Sig Sauer Marketing VP.
January 14th, 2015
 The NRA Gunsmithing Guide contains 336 pages of solid, comprehensive gunsmithing info drawn from articles originally published in the American Rifleman magazine.
The $24.95 book includes 116 articles by expert smiths who build, repair, accurize, and customize all types of firearms (with a strong emphasis on rifles). The three main subject areas are: improving rifle accuracy, customizing fine rifles, and restoring old rifles. Roughly one-third of the articles cover these three topics.
As you would expect from content that first ran in American Rifleman magazine, the articles in the NRA Gunsmithing Guide are richly illustrated with photographs, charts, drawings, diagrams, and data tables. Not Available in bookstores, the NRA Gunsmithing Guide is sold online through Palladium Press, the NRA’s Book Publishing Affiliate.
Click Here for NRA Gunsmithing Guide ORDER Page
|
