We are often asked, “Can you recommend a good reloading book that picks up where the typical reloading manual leaves off — something that goes into more detail about the processes involved.” There is such a book, and it’s fairly recent: Metallic Cartridge Handloading: Pursuit of the Perfect Cartridge, by M.L. (“Mic”) McPherson. Released in 2013, this 425-page book goes into greater depth than McPherson’s popular intro reloading guide, Metallic Cartridge Reloading. McPherson’s latest reloading treatise covers all aspects of the reloading process: the cartridge case; maintaining, improving and loading the case; the seating and reading of primers; the loading of propellant; bullets and the loading of bullets; accurate load development; internal and external ballistics; bullet making and casting; and reloading presses.
With hundreds of photos and illustrations, this book is a good reference for shooters getting started in precision reloading for accuracy. Compared to some other books on reloading procedures, McPherson’s new resource is more up-to-date, so it references more modern reloading tools and techniques. NOTE: This is NOT a reloading manual containing specific load data. Rather, it is a how-to book that covers the process of cartridge reloading from start to finish.
Reviews by actual book buyers: A great resource for handloaders although a little technical for beginners. I have been reloading for 40+ years and picked up some good ideas. — Loren R.
This is a book intended for people who have been reloading for a while. The book contains very detailed information about reloading. — Kaj H.
About the Author, M.L. (“Mic”) McPherson:
Mic McPherson, Technical Editor of Hand Loader’s Digest, is the author of numerous firearms resource books including Metallic Cartridge Reloading and Accurizing the Factory Rifle. He has written scores of articles for leading gun periodicals including Precision Shooting, The Accurate Rifle, Rifle Shooter, and Varmint Hunter Magazine. Mic also served as an Editor of the 8th and 9th Editions of Cartridges of the World.
Cabela’s, the large sporting goods enterprise, is sponsoring a six-month sweepstakes with some serious prizes. To enter, you shoot a target, take a photo of the target, and upload the photo with your entry info. For the next six months, February through July, there will be prize drawings each month. Monthly prizes will include firearms, NRA Life Memberships, ammo, shooting accessories and more. For example, this month (February), Cabela’s will give away a new Savage A17 Rifle and 200 rounds of 17 HMR ammo, plus an NRA Life Membership. Next month, the awards include TWO S&W rimfire guns (both rifle and pistol), 1000 rounds of .22LR ammo, plus an NRA Life Membership.
How to Win Prizes
To enter the contest, first shoot a Cabela’s Target, then upload a photo of the target via Twitter, Instagram, on Cabela’s Online Entry Form. You can submit a new entry each month for the February-July period. There will be different winners each month.
Photos must show an official Cabela’s Shooting Park Target to be eligible. The Cabela’s Shooting Park Target can be downloaded for free by clicking on the image at right or THIS LINK.
No purchase necessary. Open to legal residents of U.S./DC who are at least 21 years of age. Void in RI and where prohibited. Sponsored by Cabela’s Marketing and Brand Management, One Cabela Drive, Sidney, NE 69160. Odds depend on number of eligible entries received. Approximate value of February prize is $2,069. For details, see Official Contest Rules.
Here’s a tale that should make you chuckle. This is the kind of boo-boo any shooter can make (but hopefully only once). Our friend Vu Pham from Sacramento was out testing his .260 Rem tactical rifle. Now Vu, an ace NorCal Tactical marksman, is a darn good shooter — but his first three-shot, 200-yard group looked like a shotgun pattern. Vu was puzzled to say the least. (His actual reaction, as noted on the target, was “WTF?!”)
But there was a simple explanation for the rifle’s miserable accuracy — Vu forgot to tighten the crossbolts attaching the rings to his scope rail. Consequently, his scope was moving after each shot. According to Vu, stunned disbelief followed by embarrassment happens “the moment you realized you forgot to torque your scope rings to the base after moving [the scope] the night before. [I felt like a] Freaking nooooob.”
This image shows a barrel in the process of hammer forging. Watch this operation starting at 1:15 in the video linked below.
You have probably heard the term “hammer-forged barrel”. But do you know how the cold hammer-forging process works? In this interesting video from Ruger, you can see the full barrel making process, including cold hammer-forging on a massive machine. Watch long rods of steel barrel material get cut to length, then drilled. After that Ruger uses CNC machines to contour the barrels before hammer forging.
Anyone with an interest in barrel-making should watch this video:
As the barrel is cold hammer-forged, a giant machine literally pounds the barrel from all sides around an internal carbide mandrel, which forms the rifling inside the bore. The actual hammer-forging is illustrated starting at 1:15 in this video. Through the process of cold-working the barrel around the mandrel, the barrel ends up with a longer length, a smaller outside diameter, and a higher hardness.
Before hammer forging, the barrels are deep-hole drilled, four at a time, with a bit that is slightly larger diameter than the caliber planned for the barrel.
Following the drilling, the barrel rod is placed in CNC machines to be turned down to the correct outside shape and size and both ends are trimmed.
Appeals Court Remands Decision for ‘Strict Scrutiny’ of Second Amendment Issue.
Earlier this week, the U.S. Court of Appeals for the Fourth Circuit overturned a Federal District Court decision finding the 2013 State of Maryland Firearm Safety Act (FSA) to be constitutional under “intermediate scrutiny” review. In the Case of Kolbe v. Maryland, the Appellate Court held that Maryland’s FSA should, as a matter of law, be subject to “strict scrutiny” under the Second Amendment of the U.S. Constitution. The Kolbe v. Maryland case was filed to challenge Maryland’s 2013 ban on so-called assault weapons and high-capacity magazines.
The National Shooting Sports Foundation (NSSF), which helped challenge the Maryland law, explained that this bodes well for those seeking to nullify portions of Maryland’s 2013 FSA which imposed broad restrictions on firearms including semi-automatic rifles. The NSSF reports:
The [Appellate Court] vacated the District Court’s denial of the plaintiffs’ claims and remanded the case to the lower court, ordering that it apply the appropriate strict standard of review.
Writing for the three-judge appellate court panel that heard the case, Kolbe v. Maryland, Chief Judge William B. Traxler wrote: “In our view, Maryland law implicates the core protection of the Second Amendment — ‘the right of law-abiding responsible citizens to use arms in defense of hearth and home, District of Columbia v. Heller, 554 U.S. 570,635 (2008), and we are compelled by Heller and McDonald v. City of Chicago, 561 U.S. 742 (2010), as well as our own precedent in the wake of these decisions to conclude that the burden is substantial and strict scrutiny is the applicable standard or review for Plaintiffs’ Second Amendment claim.”
“We are greatly heartened by the Fourth Circuit panel’s ruling today,” said Lawrence G. Keane, NSSF Senior Vice President and General Counsel. “As this important case goes forward, NSSF will continue to work with our co-plaintiffs to ensure that our citizens’ Second Amendment rights are protected and that the lawful commerce in firearms is restored in support of this constitutional protection.”
Response from NRA Institute for Legislative Action
Chris W. Cox, the executive director of the National Rifle Association’s Institute for Legislative Action, issued the following statement in reaction to the 4th Circuit Court of Appeals decision in Kolbe v. Maryland: “The Fourth Circuit’s ruling is an important victory for the Second Amendment. Maryland’s ban on commonly owned firearms and magazines clearly violates our fundamental, individual right to keep and bear arms for self-defense. The highest level of judicial scrutiny should apply when governments try to restrict our Second Amendment freedoms.”
Dry-firing practice can benefit all competitors, particularly sling-shooters. However, for AR15 Service Rifle shooters and High Power competitors using AR-based “spaceguns”, dry-firing is complicated by the charging handle location — pulling back on the handle requires that you move your head placement on the rifle. In addition, extensive AR dry-firing can cause pre-mature wear of an AR’s firing pin. AR shooters take heart — now there are products that allow you to dry-fire your AR more easily, without breaking position, and with no adverse effects on the firing pin.
Creedmoor AR15/M16 Dry-Firing Device Creedmoor Sports offers a Delrin dry-firing device that allows you to reset your AR trigger with a very short pull of the charging handle — plus you don’t have to break position. Machined from solid Delrin, the dry-fire device is inserted into the bolt carrier and limits the swing of the hammer, allowing unlimited dry-firing without the risk of firing pin damage. The trigger pull is unchanged and the shooter can reset the trigger mechanism by cycling the charging handle a mere one-quarter inch or so. The shooter can reset his trigger without breaking position and the lessened impact of the hammer allows the shooter to better evaluate his sight picture and follow-through. Creedmoor’s AR-15/M16 Service Rifle Dry-Fire Device, item #C1051, retails for $18.95
Other AR Dry-Firing Devices MidwayUSA offers a similar Delrin dry-firing device for ARs. Like the Creedmoor unit, this TMA-made device fits in the bolt carrier group and protects the firing pin from damage. The orange unit slips between the buffer and bolt, and permits the trigger reset with only a quarter-inch movement of the charging handle. During storage the device can also provide a safety function by preventing the hammer from hitting the firing pin. But, we caution, don’t leave your gun loaded presuming this device, by itself, will make the gun safe. MidwayUSA’s orange Delrin AR dry-firing device, item #872223, costs $17.29.
Story tip by Boyd Allen. We welcome submissions from our readers.
Here’s an AR configuration suited to the new AR Mid-Range Prone Discipline: Moderate-length barrel, Harris Bipod, Leupold Mark AR MOD 1 4-12x40mm scope. Photobucket image by Ingo1978.
The NRA has created a new mid-range, target-shooting discipline for AR owners. The provisional rules for the new AR Mid-Range Prone Competition will allow calibers from .22 up to .308. Rifle weight will be limited to 14 pounds. Competitors may use Harris (or similar) compact, “tactical” bipods, and optics up to 12-power will be allowed (but iron sights can also be used). The goal of this new competition is to get the many AR owners to the range to compete.
The NRA’s Information Sheet for the new mid-range discipline explains: “These rifles are of the ‘AR-Platform’ variety, semi-automatic, chambered in any caliber from .223 cal./5.56mm. up to and including .308 cal./7.62mm. The courses of fire will be the same courses of fire currently used for other NRA Mid-Range (Prone) High Power Competition (300, 500, and 600 yards) and are designed to be fired concurrently with other forms of Mid-Range competition. The targets will be the same targets that are used for Service Rifle, Match Rifle, and Palma Rifle Mid-Range Prone competition. Mid-range telescopic sights will be allowed, but not required. Because this is prone competition, shooters may use tactical front rests such as Harris-type bipods and limited rear rests of the type one might find used in military or police tactical situations.”
A very prominent NRA member who works with the Competition Committee recently posted this explanation of the new AR discipline on our Forum:
NRA Mid-Range (Prone) Tactical Rifle (AR)
For those clubs and match directors who have members with ARs who want to shoot Mid-Range Prone but who don’t want (or can’t afford) to shoot traditional “sling” or F-Class, we have a new opportunity to get those ARs out of the closet and onto the range with very little in the way of additional costs:
It’s called Mid-Range Tactical Rifle (AR). A copy of the description and the Rules (Provisional) are attached as a PDF file and should be published by the NRA very soon. CAUTION — these are NOT official — but I think they are accurate:
In brief, here’s how it works:
1. The event will be fired concurrently with any other Mid-Range event, alongside of F-Class and “sling” divisions.
2. The Event will be fired on the “sling targets”.
3. AR Rifle General Standards:
Calibers: 223/5.56 up to and including .308/7.62mm
Weight: Overall weight not more than 14 pounds
Support: Harris-type “tactical bipod” (no large F-Class bipods).
Optics: Scope not more than 12X
Barrel: Not more than 20″
Trigger: Trigger pull not less than 4.5 pounds
4. This is NOT F-Class — this is designed to be closer to “tactical”. F-Class competition gear is generally illegal; competition stocks are generally illegal. [The event] is designed to attract more law enforcement and/or military (maybe local National Guard?) and other “tactical shooters” out to the range shooting for precision. For more info, check out the attached PDF file.
You’ll find a discussion of this new AR Mid-Range discipline in our Shooters’ Forum, HERE: AR Mid-Range Match Forum Thread. Here are some interesting comments from that thread:
“Opening up mid-range matches for ARs is a great idea. I’m not an AR guy myself, but I have lots of shooting friends who are. They tend to have a lot of ideas what their guns are capable of out to 600 yards, but most don’t take many opportunities to shoot them at those ranges, and none of the existing High Power disciplines are very appealing. Until now. I hope it doesn’t become an equipment race. A 185/200 is a respectable score even with a 12″ 10 ring. I hope everyone is supportive — helping get these guys on the paper and providing positive feedback even for scores that seem modest by F-Class standards.” — Comment by Berger.Fan222
“It looks like the recommended targets will be the same as conventional shooters use (i.e. ~1 MOA X-ring). Given the specifications for rifles/bipods/scopes/etc., I think this would be an appropriate level of difficulty to start. It will be challenging, particularly at 600 yards, but by no means impossible. Of course, at 600 yards, anyone shooting an AR15 (.223/5.56) will be at a disadvantage to ballistically-superior calibers unless they come up with a good way to load 80+ grain bullets that will mag-feed. Personally, I’d like to see this limited strictly to .223 ARs. Almost everyone has one and the mag feed requirement would really keep things even across the board. The inclusion of other calibers will allow this to become a ‘caliber race’ in that .223 will have a very hard time keeping up with other, better calibers at 600 yards.” — Comment by gstaylorg
“Looks like a great new addition. The PDF document says rule 7.20 for course of fire which is mid-range slow fire. I believe all slow fire is currently ‘one round loads’. The PDF explicitly states 10-, 20- or 30-round magazines and no sleds. Does anyone know if this new discipline would be fired from magazine or one-round loads? Shooting from magazine would be keeping with the ‘tactical’ aspect and enforcing mag-length loads. But it does not seem to jive with the ‘one round load’ currently stipulated for slow fire?” — Comment by Highpower-FClass
The NRA Blog has published a nice set of super-sized playing card targets. These boast a variety of aiming points (large and small) so they work well for rifles as well as pistols. On the Queen of Diamonds, aim for the large bull-style designs in the “red zone” or aim for the smaller dots on the periphery. For a real challenge, try to shoot each one of the 26 small red diamonds in the curved, central white stripes.
On the Five of Clubs target, you can aim for the smaller club symbols, or shoot for the orange, purple, and green “dripping paint” bulls in the large, central club. The Ace of Spades target offers a colored bullseye in the center, plus a very small bullseye in the letter “C”. Last but not least, the Eight of Hearts is a perfect choice for a trip to the range on February 14th, Valentine’s Day.
Our nominees for the “Hardest-working Heroes” of SHOT Show 2016 are our friends Ed and Steve, aka the 6.5 Guys. Over the course of four days, this tireless duo completed over FIFTY short videos. They visited dozens of manufacturers, finding the “latest and greatest” rifles, stocks, actions, scopes and other hardware. While in Vegas, the 6.5 Guys managed to visit most of the top-flight optics-makers. Here are videos reviewing products from Nightforce, Vortex, and March. To see 50+ more videos, visit the 6.5 Guys YouTube Channel.
2016 SHOT Show Highlights — OPTICS
Nightforce Optics — New SHV 4-14x50mm (FFP)
The new 4-14x50mm SHV scope from Nightforce is available with either 0.1 Mil or 1/4-MOA clicks, with two reticle choices: MIL-R and MOAR.
Vortex Optics — New Razor 6-24x50mm AMG (FFP)
The new 6-24x50mm Razor HD AMG is a made-in-USA scope with a full 25 MOA of elevation in one turret rotaion. Vortex says this scope rivals anything on the market in its category.
March Optics — 3-24x52mm (FFP)
March’s popular 3-24x52mm scope is offered with either 0.1 Mil or 1/4 MOA clicks. The particular model featured in the video has 0.1 Mil clicks and an illuminated reticle. March Optics USA also offers a remarkable 5-50x56mm scope that can work for everything from short-range practical matches to extreme-long-range shooting. One of our staffers has the 5-50X March and he uses it for both Tac Comps and 1000-yard F-Class matches.
The 2016 Berger Southwest Nationals event is less than a week away. If you need some last-minute practice before this match and you don’t have the time (or money) to load a couple hundred rounds of centerfire ammo, consider rimfire practice. Past F-TR National Champion James Crofts attributes much of his success to plenty of trigger time with his rimfire training rifle.
Rimfire Training for F-Classers
2014 and 2012 U.S. National F-TR Champion James Crofts is one of America’s top F-Class shooters. A member of the 2013 World Championship-winning F-TR Team USA squad, James knows a thing or two about long-range shooting, that’s for sure. But you may be surprised to learn how James sharpens his shooting skills at relatively short distances. You see, James often practices with a .22 LR rimfire rifle at distances from 50 to 200 yards. James tells us: “Shooting my F-Class rimfire trainer saves me money and improves my shot process and wind-reading abilities.”
Remington rimfire 40X barreled action in PR&T LowBoy stock with PT&G bolt.
Rimfire Training Teaches Wind-Reading Skillsby James Crofts
Training with the rimfire is extremely useful and can be done from 25 yards out to 200 yards. I am lucky and can shoot 50 yards right off my back deck. That is far enough that any miscue on rifle handling will show up on the target. I use a two dry-fire to one actual shot routine for my practices. This gives me much more positive reinforcement without any negative reinforcement.
Wind reading is extremely important with a .22 LR rifle. I use a set of smallbore flags to aid my wind calls. The smallbore flags are a must and force you to look at the flags and mirage on each and every shot. If you think the flags at Camp Butner move a lot, try smallbore flags around tall pine trees.
James Crofts — Photo by Kent Reeve.
Rimfire Training Is Cost-Effective
Rimfire ammunition is much less costly than centerfire ammo. Though .22 LR prices have risen in recent years (and rimfire ammo is harder to find), even now I can get a 500-round brick of .22 LR ammo for less than $75.00. That works out to fifteen cents a round. That’s a fraction of the cost of handloading .308 Win match ammo. Heck, you can pay 40 cents a piece for match-grade .308-cal centerfire bullets. Then you have to figure in brass, primers, and powder.
My CMP 40X Rimfire F-TR LowBoy Clone
My quest into the .22 LLR rimfire field started with an email from the Civilian Marksmanship Program (CMP) announcing Rem 40X stripped barreled actions for sale. I thought, “Hmmm… Could one of those little 40X barreled actions be turned into a F-Class training rifle?” My gunsmith Ray Bowman of Precision Rifle & Tool was brought in at this point.
After conferring with Ray, it was decided that he could indeed turn this into a F-Class training rifle. Ray contacted Dave Kiff of PT&G and ordered a new bolt for the Remington 40X rimfire action. Next was the stock decision. I decided to go with a PR&T Low Boy F-Class stock — this is an exact clone of the stock for my .308 Win F-TR competition rifle. Then a Jewell trigger was acquired to complete the components. Ray built this just like he would any custom rifle, other than using the stock barrel. The project turned out awesome. The rifle was a hammer from the beginning even with the stock barrel.
Here’s a tale that should make you chuckle. This is the kind of boo-boo any shooter can make (but hopefully only once). Our friend 
