Ruger has just introduced a new compact version of its Ruger American Pistol. We predict the new American Compact will become popular with CCW-holders. With a 3.55″ barrel, and 6.65″ length, Ruger’s new 9mm carry gun is similar in size to a S&W M&P9C, and slightly smaller than a Glock 19. At 28.7 ounces, the new Ruger Compact is heavier than the M&P9C (21.7 oz.), and the Glock 19 (23.6 oz.), but the Ruger is the slimmest of the three, with a slide width of just 1.05 inches.
We’re pleased to see the American Compact is offered either with or without an external frame-mounted safety, to suit the buyer’s preference. Also, the gun offers easy take-down with no trigger pull required (by contrast, you have to pull the trigger to take-down a Glock).
Ruger’s new Compact American Pistol is offered either with 10+1 capacity*, or 17+1 capacity. The 17+1 version employs magazines from the full-size Ruger American pistol, with a sleeve or “boot” to fit the shorter grip. With either type of magazine, the gun has proven 100% reliable, according to writer Rich Grassi, who tested the new pistol for The Shooting Wire.
The grip ergonomics on the Compact American Pistol could be described as “Walther-esque”. Rich Grassi says that’s a good thing — this little pistol is comfortable in the hand: “You also don’t pinch a finger when inserting a magazine – either magazine – into the American Compact. Like the service-size gun, three grip modules (back strap with palm swells) are included. The gun has the Novak Low Profile carry sights with the ‘3-dot’ pattern thereon.” Grassi said his test pistol shot low with a standard sight picture, but otherwise the accuracy was good.
NRA testers say the new Compact Ruger American Pistol is extremely reliable and very accurate.
Ruger says this pistol “combines a recoil-reducing barrel cam… with a low-mass slide, low center of gravity and a low-bore axis to provide better balance, less felt recoil, and less muzzle flip[.]” The Ruger Compact American Pistol also features a pre-tensioned striker system, which allows for a short-take-up trigger with positive reset. Like its bigger brother, the Compact American Pistol features a modular wrap-around grip system that fits a wide range of hand sizes.
*Some early reviews have stated the “standard” capacity as 12+1. However Ruger’s website and the official Spec Sheet lists 10+1.
Ballistics Guru Bryan Litz needed all of his wind-reading skills in Lodi, WI. Conditions were challenging!
Bryan Litz of Applied Ballistics won his second straight Mid-Range F-TR National Championship this past weekend. Likewise the Michigan F-TR Team won its second Championship in a row. So it was a heck of a showing by the Michiganders overall. With a strong individual performance, Phil Kelley finished second with his fellow X-Men teammate James Crofts in third. The X-Men Team also garnered second-place in the F-TR Team event. Kelley told us: “It sure is fun to compete with the best in the business — to share the individual overall podium with Bryan Litz and James Crofts is an exciting honor.”
It was a bit cold in Lodi, Wisconsin, photo by K. McSparron.
F-Class Goes High-Tech with Electronic Targets
This was the first-ever F-Class National Championship that used electronic Targets. Litz offers his perspective on the new E-Targets in the Q&A section below — Bryan is mostly positive about the E-Targets but he says there are still some minor bugs to be worked out.
Bryan, a sling-shooter at heart, has really taken to this F-TR game. He won both the Mid-Range and Long Range F-TR National Championships in 2015 and now he has one 2016 title in the bag. Bryan tells us: “Many thanks go out to all those who’ve supported me in winning my second F-TR Mid-Range National Championship. My serious pursuit of F-TR shooting began the day I called John Pierce and requested: ‘John, build me one like yours’. That rifle and others built by Pierce Engineering are at the top of the game. Thanks also to my many great team-mates on the Michigan and U.S. Rifle Teams who have taught me a lot about this sport. As always the competition was stiff and mother nature gave us some drastically different looks. The challenging weather, combined with the introduction of electronic targets to this sport at the national level, required shooters to be highly adaptable. Thanks to the match organizers and technical staff who did a great job.”
John Pierce (left) and Bryan Litz with his Championship-winning Pierce-built F-TR rifle (2014 photo).
Litz Loads Vihtavuori N140 with 215gr Berger Hybrids in his .308 Win
Bryan told us: “Load data is always a common question and I keep no secrets –I’m running the same basic load I shot the past few years with the exception that I’m now burning 43.0 grains of Vihtavuori N140 instead of Hodgdon Varget in new Lapua brass with Fed 210M primers and 215 Berger Hybrids seated about 0.005″ off the riflings. This gets 2520 fps in a 28-inch barrel. I use this same load for both mid-range and long range.”
Team Competition — Michigan Wins F-TR Division with X-Men in Second
Michigan F-TR Team won its second consecutive Mid-Range National Championship. Congratulations to team-mates Al Barnhart, Doug Boyer, Bryan Litz, and John Roethlisberger. Al and Doug are experienced veterans but this is John’s first experience in a national-level event. Michigan actually fielded two teams in this event and the second squad also won a medal in one of the matches. Byran Litz noted that the Michigan F-TR Team “has been working hard to develop our shooters and many have made it onto the U.S. Rifle Team. We have many great sponsors including: Applied Ballistics, Berger Bullets, Bartlein Barrels, Marksmanship Training Center, Nightforce Optics, Pierce Engineering, and Vihtavuori Powder.” Bryan added: “I also thank Team X-Men for the spirited competition. You guys (James Crofts, Tracy Hogg, Phil Kelly, Ian Klemm, and Ken Klemm) are great and make these team matches very fun.”
Bryan Litz with Michigan F-TR team-mates Al Barnhart, John Roethlisberger, and Doug Boyer.
Q & A with the Champ — Litz Talks Targets and Match Strategies
We asked Bryan how the new Electronic Target technology used in Lodi alters the F-Class game. As the Long Range Nationals are underway now, we also asked Bryan to comment on Mid-Range vs. Long Range strategies — what does he do different at 1000 yards vs. 600 yards.
1. How did you like the electronic targets? Did this require/allow a change in your shooting style or rhythm (e.g. can competitors shoot faster now with less wait time between shots)?
LITZ: I really like the E-Targets for many reasons. Not pulling pits is the biggest one but the E-Targets also bring a level of fairness that human pullers could never achieve in the sense that everyone gets the same speed ‘service’.
For the 2016 FCNC in Lodi, WI, all the targets are programmed with a 7-second delay which is equivalent to “very good” target service. The system actually shows your shot value immediately, but doesn’t plot the location of the shot for 7 seconds. So if you want to “machine gun” a shot following an X with the same hold, you can take your chances without knowing where the X was.
The E-Targets require some adaptation from regular pit service. For those with many years of experience on traditional targets, it’s just WEIRD that the target doesn’t go up and down or have a spotter in it. All the information you need is on the tablet. This isn’t better or worse, just different. Occasionally the tablets lose signal for a few seconds and it can be frustrating, but this is not different than when a puller missed a shot and you had to “call for a mark”. I think that very soon the connectivity issues will be fully resolved and the systems will operate flawlessly. I know it would be impossible to get all the shooters through on such a small range any other way. The E-Targets have enabled a medium-sized range like Lodi to host a National Championship.
Q: How is the mid-range F-TR game different than long-range F-TR competition?
LITZ: Usually Mid-Range is about consistent precision — not having any fliers and not dropping any points. Mid-Range matches are usually decided by a narrower point spread than long range. Conditions aren’t typically big enough to move you out of the 10 ring very much at mid-range. The first couple days of the 2016 Mid-Range Nationals was just like this. I won the first two days, dropping only 3 points in total. But then the wind picked up on Day 3 and it was totally different! It became more like a Long Range match with all the points falling like rain and [conditions] very difficult to read. Many more 8s and 7s appeared at 600 yards and the field really spread out. In the end I was able to hold onto my lead and win the tournament.
Q. Why the change to Vihtavuori N140 powder? Was it more available or were you seeing lower ES/SD?
LITZ: I’m seeing the same ES/SDs with VV N140 as what I was using before (Varget) and N140 may burn a little cleaner. Also availability has been improving on the Vihtavuori powders in recent years. We (the Michigan F-TR Rifle Team) are very fortunate to have Vihtavuori as a sponsor and look forward to winning many matches with Vihtavuori products.
Editor’s Note: If any readers have results for the F-Open Mid-Range Nationals, please post in the comments section below and we will update this story.
Ready for some action in Arizona? The 13th Annual Western CMP Games and Creedmoor Cup Matches will be held at the Ben Avery Shooting Facility in Phoenix, Arizona. The CMP Games run 7-11 October while the Creedmoor Cup Matches take place 12-16 October. All interested shooters are invited to participate in these prestigious, national-level competitions. NOTE: Registration for the Creedmoor Cup matches must be done online via www.creedmoorsports.com.
The CMP Western Games will include the Garand, Springfield, Vintage Military, Modern Military, Rimfire Sporter, Carbine, and Vintage Sniper matches. Along with the shooting matches, the CMP will offer a special CMP Games Match Clinic plus a Small Arms Firing School (Rifle). These training programs can benefit novices as well as experienced shooters. If you need to buy ammo or hardware, the CMP will operate a Sales Booth at Ben Avery all 4 days of Western Games.
Creedmoor Cup Schedule and Events
The Creedmoor Cup Matches will begin on October 12th and conclude on October 16th. A great Bar-B-Q on Saturday is included with entry. This year’s Creedmoor Cup schedule includes the following events: High Power Rifle Clinic, Creedmoor Cup Match (2400 point aggregate), 4-Man Team Match, and Creedmoor EIC Match. The Special High Power Shooting Clinic will include lectures, demonstrations and dry-fire training by some of the world’s most talented service rifle marksmen.
Western CMP Games Matches
Garand & Springfield Match Clinic
John C. Garand Match
Springfield Match
Vintage Military Rifle Match
Small Arms Firing School/M16 Match
Rimfire Sporter Match
Carbine Match
Vintage Sniper Match
Modern Military Rifle Match
Western Creedmoor Cup Events
High Power Rifle Clinic
Creedmoor Cup (2400 point aggregate)
4-Man Team Match
Creedmoor EIC Match
To see a real pro shooting Service Rifle, check out the above video. That’s former National Champion (now Creedmoor Sports G.M.) Dennis DeMille, shooting 300-yard Rapids from the prone position. This was filmed at the 2010 Berger Southwest Nationals at Ben Avery. You’ll see Dennis adjusts his sights while looking through the spotter. Then watch how calm and steady Dennis stays from shot to shot. That comes with years of practice and training.
The third annual Pyramyd Air Cup attracted nearly 100 amateur and professional shooters from around the nation, making it the best-attended AAFTA Grand Prix Field Target event in the USA this year. Hosted September 9-11 at the Tusco Rifle Club in New Philadelphia, Ohio, the Pyramyd Cup featured multiple airgun shooting disciplines including Field Target, the rapid-fire GunSlynger benchrest event, and the PayDay Challenge. Watch this video to see all the events:
Reigning AAFTA National Champion Ken Hughes stated: “What a weekend! The Field Target courses were challenging, and the wild, rapid-fire style of the Gunslynger event was difficult in its own right. It was great getting to meet new airgun buddies and check out the new gear from the many vendors in attendance. I really enjoyed the PA Cup!”
Field Target Discipline Is Challenging
“Field Target is one of the most difficult shooting disciplines out there,” says Pyramyd Air Cup Match Director, Tyler Patner. “Combine the multiple skills required to rise to the top of your game, with the myriad of factors you take into account at each lane, and you’ve got a challenging sport.”
“Targets are small, metal silhouettes of animals that consist of a kill zone and a colored paddle,” explains Patner. “Placed at unknown distances from between 10 yards to as far as 55 yards, the targets have kill-zones ranging in size from 3/8 inch to 1 1/2 inches. When the pellet passes through the kill zone and hits the paddle, the target falls and you’re awarded a point. It’s a game of precision and practice. You range-find with your scope, dope for distance, take the wind into account, and then you have to execute. There are different restrictions based upon your selected class, but the challenges remain the same. Wind-doping, range-finding, and remaining mentally tough over the entire course of fire are the biggest hurdles competitors face.”
Huge Prize Table for Competitors
Competition prizes were donated by many airgun and optics manufacturers including: AirForce Airguns, Air Arms, Beeman, Crosman, Birchwood Casey, Diana, Feinwerkbau, H&N, Hawke Sport Optics, JSB, Leapers, Plano, Predator, Umarex, UTG, and Walther. “You’d be hard-pressed to find an airgun competition with a better selection of prizes for its winners,” says says Pyramyd Air CEO, Joshua Ungier. “Our winner’s packages help assure shooters that if they’re limited to traveling to only one competitive shooting event, they recognize the Pyramyd Air Cup as the industry’s premier event.”
Here’s a tip for guys who shoot the 6 PPC, 6 Dasher, or other wildcat cartridges that require fire-forming. Use your fouler shots to fire-form new cases. That way your fouler shots do “double-duty” and you get your brass fire-formed without putting extra rounds through your expensive barrel.
This procedure is recommended by Joel Kendrick, the 2004 IBS 600-yard Shooter of the Year. After he cleans his barrel, Joel knows it takes two or three shots to foul in the bore before accuracy returns. When shooting his PPC, Joel uses those fouler shots to fire-form his new brass. Joel explains: “I like to have relatively new brass always ready. By fire-forming a couple cases after each barrel-cleaning during a match, by the end of the weekend I’ve got a dozen or more freshly fire-formed cases to put into the rotation. If you do this with your fouler shots you get your fire-forming accomplished without using up any extra barrel life.”
We thank Joel for this smart suggestion. For those who do not have a dedicated barrel for fire-forming, this should help keep your round-count down. Joe currently works as the Supplier Quality Process Engineer for MMI-TruTec, a company that offers barrel surface coatings that can further extend your barrel life.
Most bolt-action rifle shooters work the bolt with their trigger-pulling hand. This is because most rifles sold to right-handed shooters come with right-side bolts, while “lefty” rifles come with left-side bolts. This “standard” configuration requires the shooter to take his dominant, trigger-pulling hand off the stock to cycle the bolt, then re-position his hand on the stock, and “re-claim” the trigger. Often the shooter must lift or move his head to work the bolt, and that also requires him to re-establish his cheek weld after each and every shot. Not good.
This really doesn’t make much sense for precision shooting with fore-end support*. There is a better way. If you leave your trigger hand in position and work the bolt (and feed rounds) with the opposite hand, then you don’t need to shift grip and head position with each shot. All this requires is a weakside-placed bolt, i.e. a left bolt for a right-handed shooter or a right bolt for a left-handed shooter. The video below shows a “Lefty” working a right bolt. Note how efficient this is:
As our friend Boyd Allen explains: “If you think about it, if you are going to work with a factory action where your options are left bolt and left port or right bolt and right port, and you are building a rifle that will only be shot from a rest, using the left/left for a RH shooter or using a right/right for a LH shooter works better than the conventional configuration”.
Shoot Like a Champ and Work the Bolt with Your Weakside Hand
Derek Rodgers, the only person to have won BOTH F-Open and F-TR National Championships, runs this kind of “opposite” bolt set-up, shooting right-handed with a left bolt. Though Derek is a right-hander, he shoots with a Left Bolt/Left Port (LBLP) action. He shoots with his right hand on grip, while manipulating the bolt (and feeding rounds) with his non-trigger-pulling hand. He pulls the trigger with his right index finger, while working the left-side bolt with his left (weakside) hand. This allows him to stay in position, and maintain his cheekweld.
2013 National Championship-Winning Derek Rodgers Left Bolt/Left Port Rifle.
*For true standing, off-hand shooting (whether in competition or on a hunt), a conventional strongside bolt placement makes sense, since the non-dominant arm must support the front of the rifle all the time. When shooting from bipod or rest, it’s a different story.
If you have a Remington bolt-action rifle, you may qualify for a trigger upgrade, a voucher, or reimbursement of costs spent changing out your trigger mechanism.
These benefits result from the settlement of a class action lawsuit which alleged that Remington trigger mechanisms with “trigger connectors” and X-Mark Pro® triggers could have accidental discharges without the trigger being pulled. The settlement involves two classes. The first class includes owners of firearms that utilize a trigger connector. The second class includes owners of firearms that utilize the X-Mark Pro trigger mechanism that is the subject of a voluntary safety recall. The settlement allows owners of Remington models 700, Seven, and related models to have their trigger replaced free of charge, among other benefits.
WHO IS INCLUDED?
The Settlement provides benefits to: Current owners of Remington Model 700, Seven, Sportsman 78, 673, 710, 715, 770, 600, 660, XP-100, 721, 722, and 725 firearms containing a Remington trigger mechanism that utilizes a trigger connector; Current owners of Remington Model 700 and Model Seven rifles containing an X-Mark Pro trigger mechanism manufactured from May 1, 2006 to April 9, 2014 who did not participate in the voluntary X-Mark Pro product recall prior to April 14, 2015; and Current and former owners of Remington Model 700 and Model Seven rifles who replaced their rifle’s original Walker trigger mechanism with an X-Mark Pro trigger mechanism.
WHAT DOES THE SETTLEMENT PROVIDE?
Settlement Class Members may be entitled to: (1) have their trigger mechanism retrofitted with a new X-Mark Pro or other connectorless trigger mechanism at no cost to the class members; (2) receive a voucher code for Remington products redeemable at Remington’s online store; and/or (3) be refunded the money they spent to replace their Model 700 or Seven’s original Walker trigger mechanism with an X-Mark Pro trigger mechanism.
HOW CAN I OBTAIN BENEFITS?
If you are in the affected class you can submit a claim form electronically by clicking the link below:
Even if you do nothing you will be bound by the Court’s decisions. To keep your right to sue the Defendants yourself, you must exclude yourself from the Settlement Class by November 18, 2016. If you stay in the Settlement Class, you may object to the Settlement by November 18, 2016. For more info, or to make a claim, call 1-800-876-5940 or visit www.remingtonfirearmsclassactionsettlement.com.
Are you from a Northern state that’s snowbound in the winter? Looking for a fun December diversion (and a break from cold weather)? Then consider a trip to Talledega, Alabama. This December, the Civilian Marksmanship Program (CMP) hosts the Second Annual Talladega 600, “A Southern Classic”, at the Talladega Marksmanship Park. This event for rifle, pistol, and shotgun shooters kicks off Tuesday, December 6, 2016, and concludes Sunday, December 11th. It should be fun for the whole family. For more info, visit the Talladega 600 Webpage.
Competitors of all ages and skill levels are welcome at the Talladega 600. Events will include popular CMP Games Matches: Garand, Springfield, and Vintage Military Match, as well as the Vintage Sniper, Carbine and Rimfire Match. There will be a Small Arms Firing School with an M16 Match, the Congressional 30 (similar to President’s Rifle Match), the Dixie Double Highpower Match, and an EIC Rifle Match. Pistol events will include the .22 Rimfire EIC Pistol Match, the Service Pistol EIC Match, the As-Issued 1911 and the Military & Police Matches. Shotgunners can enjoy a Sporting Clays Shoot and a 5-Stand Shoot.
Talladega Marksmanship Park
The 500-acre CMP Talladega Marksmanship Park is one of the most impressive shooting venues in North America. Talladega boasts superb facilities and state-of the-art electronic target systems. Each rifle firing point is equipped with a modern KTS electronic target and scoring monitor. Located beside each shooter on the firing line, these monitors allows competitors to see shot locations and scores instantly — no more waiting for targets to pulled and then marked with with a spotter disc.
For spectators following the action, large monitors inside the comfortable 13,000-square-foot Clubhouse will display scores from the shooting matches as they are being fired. Scores are also viewable online through the CMP’s Competition Tracker.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Amazon — Caldwell Long Range Target Camera System, $349.49
Forum members have purchased this Caldwell Target Cam System and they’ve found that it works reliably, providing a clear signal to any WiFi-enabled mobile device (smartphone, iPad, Laptop). One member specifically tested the unit at 1000 yards and it functioned fine. NOTE: This system does NOT have a zoom camera lens, so you need to position the camera within 10 yards or so of the target. But if you place it to the side a bit, this shouldn’t be a problem. This system comes with a nice, fitted carrying case that holds camera, transceivers, antennas, and stands. You get a very capable system for under $350.00 (Amazon price includes free shipping for Prime members). You can also get this system from Midsouth for $357.02 (shipping extra).
2. Midsouth — Lyman BoreCam Digital Borescope, $222.46
Note: We are repeating this special because it is the best deal we’ve found on an excellent product in high demand. The Lyman BoreCam is an electro-optical borescope with a digital display. You can record “stills” on a SD card. This is one of the hottest products on the market right now — and users really like the BoreCam (although some wish the digital view-screen was larger). Midsouth Shooters Supply now has the Lyman BoreCam for $222.46. Grab it while you can at that price. Other online vendors are charging a LOT more (e.g. MidwayUSA price is $259.99).
We like reactive targets. It’s fun to “ring steel” and see a target move instantly when hit. For just twenty bucks (including shipping), it’s hard to go wrong with this 8″ AR500 Steel Gong. The 8″-diameter size is big enough for zeroing at 200 yards, yet offers a nice challenge at 500 yards and beyond. There is also a 6″-diameter model for $16.00.
Here’s a rifle with a smooth three-lug action and good trigger that can take any game in North America. The Browning A-Bolt is justifiably respected as a solid hunting rifle. The 300 Winchester Magnum chambering offers serious hitting power, even at long range. This rifle, with a blued barreled action, normally retails for $600.00+. Now it’s on sale for under $500.00. To sweeten the deal even more, right now Browning is offering $50 CASH BACK on Browning centerfire rifles purchased between August 1, 2016, and September 30, 2016. CLICK HERE for $50.00 REBATE FORM.
5. ULINE.com — 200 Pairs of NRR32 Ear Plugs for $19.00
Every shooter needs good hearing protection, and when you buy in bulk you can save big. Right now Uline.com is offering 200 pairs of NRR32-rated tapered foam ear plugs for $19.00. That’s a steal. Corded (linked) models are $36.00 for 200 pairs. This Uline offer is a great way to supply your local shooting club or youth marksmanship training program. NOTE: This deal expires 10/9/2016.
This is quality, CCI made-in-USA ammo with reloadable, brass casings. We have used this CCI-made Blazer 9mm ammo in Sig, HK, and Glock pistols and it performed very well. This stuff won’t last long at this price (less than $0.20 per round). If you need 9mm practice ammo, order soon — this very same 1000-round case of Blazer 9mm ammo costs $60.00 more at MidwayUSA. Blazer Brass is loaded in boxer-primed, reloadable brass cases for added value.
Here’s a good deal on the new Lyman 50th Ed. Reloading Manual. Our Forum members have rated this as the best Loading Manual for starting hand-loaders. This 50th Edition, the first to be produced in full color, includes more load data, and covers more cartridge and bullet types than ever before. This handbook has a strong heritage, starting with the Ideal/Lyman reloading manuals from the early 20th Century. Midsouth offers an excellent price — MidwayUSA sells this for $24.99.
Every gun owner should have a work mat to protect valuable firearms during cleaning and maintenance operations. Right now you can get a quality 36″x16″ mat for under ten bucks. The non-slip polyvinyl chloride (PVC) surface won’t harm gun’s finish, and its absorbent features keep the fluids from going through your work surface. This week Amazon is offering the Printed Version (shown above) for $9.99 and a Plain Black Version for just $8.09. That’s an excellent value either way.
Over the past few years, participation in F-Class competition has grown dramatically. At the 2013 SHOT Show we had a chance to talk about F-TR competition with then-U.S. National F-TR Team members Mike Miller and Stan Pate, two of America’s top F-TR shooters. With the U.S. F-Class Nationals underway this week (in Lodi, Wisconsin), we are reprising this interview for readers who may have missed it the first time around. If you shoot F-TR (even if you’re a High Master), we think you’ll learn a few things from this interview.
In this interview, Mike and Stan agreed to share their vast store of knowledge about long-range shooting. In a wide-ranging dialog, we discussed many topics of interest to F-Class shooters: position set-up, bipod shooting techniques (and hardware), gun-handling, and bullet selection. In addition, Mike and Stan offer some great advice on wind reading and precision reloading. These general tips will benefit all competitors, no matter what their discipline.
Watch Video for Tips from past U.S. National F-TR Team Members Mike Miller and Stan Pate
If you shoot F-TR or you are considering getting involved in this fast-growing shooting sport, definitely watch this 14-minute video interview from start to finish. Mike and Stan are true F-TR gurus whose knowledge of the F-TR game has been gleaned from years of top-level competition. If you shoot a .308 from a bipod, we guarantee you can learn much from Mike and Stan. If you follow their advice, we bet you’ll see your scores improve in future matches.
Ruger’s new Compact American Pistol is offered either with 10+1 capacity*, or 17+1 capacity. The 17+1 version employs magazines from the full-size Ruger American pistol, with a sleeve or “boot” to fit the shorter grip. With either type of magazine, the gun has proven 100% reliable, according to writer Rich Grassi, who tested the new pistol for The Shooting Wire.
Here’s a tip for guys who shoot the 6 PPC, 6 Dasher, or other wildcat cartridges that require fire-forming. Use your fouler shots to fire-form new cases. That way your fouler shots do “double-duty” and you get your brass fire-formed without putting extra rounds through your expensive barrel.
Over the past few years, participation in F-Class competition has grown dramatically. At the 2013 SHOT Show we had a chance to talk about F-TR competition with then-U.S. National F-TR Team members Mike Miller and Stan Pate, two of America’s top F-TR shooters. With the U.S. F-Class Nationals underway this week (in Lodi, Wisconsin), we are reprising this interview for readers who may have missed it the first time around. If you shoot F-TR (even if you’re a High Master), we think you’ll learn a few things from this interview.
