For you guys competing at the Berger SW Nationals this week, we’re repeating an excellent article by Steven Blair on wind reading. Steven, a top F-Class shooter, talks about mirage, topography effects, tail winds, and other subtle factors that can cause frustration for shooters. Steve explains that wind effects can be complex — there’s more going on than just velocity and angle. You need to notice things like berm locations and effects of temp changes over the course of the day.
Wind Reading Tips for Competitive Shooters by Steven Blair, 2012 California State Long Range F-Open Champion
Assess the Terrain and How the Wind Will Interact with It
Before you begin a match, take a few minutes to look around the range at the terrain, any obstructions, range topography (berms and backstop), and trees, buildings or structures that could affect wind flow over the range. Imagine what might happen if the wind was from the left or right, headwind or tailwind. Depending upon the direction, significant effects may be seen on range. A head or tail wind may ripple across the berms, causing elevation changes, both high and low. A tall side berm, like the east side berm at Ben Avery, may cause turbulence when the wind comes from that direction. Blocking features might shield most of the wind but a break along the range can funnel strong gusts through the gap with no other indications. Take a few notes about the effects of different wind directions and refer to them if the prevailing direction changes. (Tip courtesy Tony Robertson.)
Use a Spotting Scope, Even When Shooting a Scoped Rifle
A good spotting scope can “see” mirage much more clearly than even an expensive rifle scope. Take your spotting scope to the line and position it as sling shooters do, close enough to use without much movement. Focus the scope approximately 1/3 of the way down range or where the most significant wind effects are likely to occur. Take a quick look while waiting for pit service, glance at the flags and compare to your scope sight picture. I often see ambiguous indications at the target through the rifle scope, but see a clear indication of wind direction and speed through the spotting scope at the shorter distance. When shooting the Arizona Palma Championship at Ben Avery last weekend, I was scoring while the wind was coming from the east. Shooters up and down the line were out to the left, losing points. Mirage at the target looked moderate and the flags weren’t indicating strong wind. As I focused the spotting scope back, the mirage suddenly looked like it was flowing twice as fast around 500 yards than it was closer or farther. It wasn’t until I realized that the access road cut through the berm there that I understood what was happening. (Tip courtesy Gary Eliseo.)
Don’t Over-React to Something That May Be an Anomaly
On ranges with sizable berms, a headwind or tailwind can cause significant elevation problems. It is generally not possible to see or predict when this will occur. When the conditions exist that cause elevation changes and other competitors are experiencing the same problem, the best strategy is to ignore it. Certainly, avoid shooting when the head or tail wind is gusting, the same as you would in a crosswind. But, if you react to random, range-induced elevation changes, the only likely result is to make it worse. Whether the problem is caused by range or ammunition, maintain your waterline hold until you have evidence that something has fundamentally changed.
My .284 Shehane will usually require a click or two down during a string as the barrel warms. That is normal and manageable. But, if your shots are just bouncing up and down in the 10 ring, leave it alone. The same is also true of an occasional gust pushing a shot into the 9 ring. If the conditions have not changed and one shot just went out, it may be the result of a random occurrence that was not predictable. (Tip courtesy “School of Hard Knocks”.)
Adjust Spotting Scope Focus and Magnification as Needed to View Mirage vs. Target Details
In F-Class we only need to see mirage, spotters, and scoring disks. That does not take a lot of magnification. My scope is a Nikon 25-75x82mm ED. It is a superb scope for the money and makes it trivial to see minor variations in mirage. It is good to have the high magnification available, and it can always be reduced if necessary. I use different power settings for different situations.
Setting Magnification Levels
During a match, in very good viewing conditions, I set my spotting scope at 75X, full power. The mirage is more subtle in the morning and greater magnification is needed.
During a match with heavy mirage I set my spotting scope at about 40X. I have no problem seeing mirage, even at this magnification.
When practicing at 300 yards or closer I set my spotting scope at max power (75X) so I can see the little 6mm holes from my 6BR rifle. I usually need to focus back and forth between shots to see both bullet holes and mirage.
Steven Blair, 2012 California State Long Range F-Open Champion, has been shooting since childhood and competing for over 30 years. Before retiring, Steve spent 16 years in Engineering and IT with General Atomics. He has held Engineering and Marketing positions with several firearms companies and worked on projects from pistols to 155mm howitzers.
If you shoot a pistol, you should watch this video. It covers the key fundamentals of handgun shooting: stance, arm position, grip, sight alignment, and trigger control. This excellent video features USAMU shooter SGT Shane Coley.
Arm/Elbow Position: You should not lock your elbows says SGT Coley: “Because my elbows are slightly bent, it allows the recoil to transfer into my shoulders, down my core, into my legs and to the ground, allowing me to maintain a flat-shooting gun … on multiple targets.”
Grip (Hand Position): SGT Coley explains how to divide the support between both hands: “In terms of grip pressure, I’m applying about 60% to my support hand, and 40% to my strong hand. This is because I need to maintain dexterity with my strong hand to operate the trigger at high rates of speed.”
Trigger Control: The placement of your finger on the trigger blade itself is very important notes Coley: “Putting too much (or not enough) of your finger on the trigger can cause you to pull or push your shots. When you squeeze the trigger, make sure to squeeze it all the way to the rear, in one smooth motion. A quick dry-fire drill to help you with this is to take an empty piece of brass and place it on the front of your slide. Aim at the target, and with the proper trigger control, you should be able to break the shot without the piece of brass falling.”
Pistol Pointers
On the web, you’ll find hundreds of pistol shooting videos — some good, some not helpful at all. In some of those “not helpful” videos the featured shooter has bad habits, or more often than not, he exhibits poor accuracy on target. You won’t find those kinds of shortcomings in this USAMU-sponsored video. SGT Coley doesn’t make foolish mistakes, nor does he exhibit bad habits when shooting. And his accuracy is outstanding. When you look for a pistol trainer — stick to someone like SGT Coley, who has solid fundamentals, the complete skill set, and superior accuracy. A trainer can’t teach a skill that he doesn’t understand himself.
The Berger Southwest Nationals (SWN) kicked off with a two-day shooting clinic held Monday and Tuesday, February 6-7, 2017. Competition at the Ben Avery range begins with a 600-yard Mid-Range Match on Wednesday, followed by long-range matches Thursday through Sunday. Three classes of competitors will be on the firing line: Palma (.308 Win sling), F-TR, and F-Open. This is one of the most popular matches of the year, drawing competitors from around the nation (and a few foreign countries).
The Berger SW Nationals event has become the premier long-range match of the year in the Western United States. This prestigious rifle competition, hosted at the Ben Avery Shooting Facility, outside Phoenix, Arizona, draws the nation’s top F-Class and sling shooters. Over 360 shooters have already registered for the SWN.
2017 Berger Southwest Nationals Schedule of Events
Monday, 6 – Tuesday, 7 February 2017, 9:00 AM
Shooting Clinic: Two-Day clinic includes instruction in both classroom and live fire settings. Instruction will start at 9:00 AM.
Wednesday, 8 February 2017, 9:00 AM
Mid-Range Match – Three, 20-shot matches at 600 yards.
Divisions: Palma, Any Rifle/Any Sight, F-Open, F-TR
Thursday, 9 February 2017, 9:00 AM
4-Man Palma Team Match – 15 shots for record at 800, 900 and 1000 yards.
Divisions: Palma, F-Open, F-TR
Practice available to those not shooting with a team.
Friday, 10 February 2017, 8:30 AM – Start of Grand Agg
Individual Palma Match – 15 shots for record at 800, 900 and 1000 yards.
Divisions: Palma, F-Open, F-TR
Swap Meet – after conclusion of fire at 1000-yard line.
Saturday, 11 February 2017, 8:30 AM
Individual 1000-Yard Matches – Two 20 shots matches at 1000 yards. Any Rifle-Iron Sight (Any sight for F-Class shooters). (Divisions – Palma, Any Rifle-Iron Sight, F-Open, F-TR)
4 Man Team Match – 20 shots at 1000 yards. Any Rifle-Iron Sight (Any sight for F-Class shooters). (Divisions – Palma, Any Rifle-Iron Sight, F-Open, F-TR)
Banquet Dinner – Approximately 5:00 pm at Indoor Range.
Sunday, 12 February 2017, 8:30 AM
Individual 1000-Yard Matches – Two 20 shots matches at 1000 yards. Any Rifle-Any Sight (Any sight for F-Class shooters). (Divisions – Palma, Any Rifle-Any Sight, F-Open, F-TR)
Awards Ceremony at the Indoor Range.
To help you prepare for the Berger SW Nationals, here are some competition tips from Bryan Litz. Bryan knows the Ben Avery range well. He won the Mid-Range and Long-Range F-TR National Championships there in 2015. And twice he has won the sling division at the Southwest Nationals. Here are wise words from Bryan:
Competition TIP ONE. Improving your scores in long range competition is a constant process of self-assessment. After each match, carefully analyze how you lost points and make a plan to improve. Beginning shooters will lose a lot of points to fundamental things like sight alignment and trigger control. Veteran shooters will lose far fewer points to a smaller list of mistakes. At every step along the way, always ask yourself why you’re losing points and address the issues. Sometimes the weak links that you need to work on aren’t your favorite thing to do, and success will take work in these areas as well.
Competition TIP TWO. Select your wind shooting strategy carefully. For beginners and veterans, most points are typically lost to wind. Successful shooters put a lot of thought into their approach to wind shooting. Sometimes it’s best to shoot fast and minimize the changes you’ll have to navigate. Other times it’s best to wait out a condition which may take several minutes. Develop a comfortable rest position so you have an easier time waiting when you should be waiting.
Competition TIP THREE. Actively avoid major train wrecks. Sounds obvious but it happens a lot. Select equipment that is reliable, get comfortable with it and have back-ups for important things. Don’t load on the verge of max pressure, don’t go to an important match with a barrel that’s near shot out, physically check tightness of all important screws prior to shooting each string. Observe what train wrecks you and others experience, and put measures in place to avoid them.
Sinclair International has a good article on Case Lubrication which shows the various products and application methods available. Part of Sinclair’s Step-By-Step Reloading series, the article shows how to apply Spray Lube, Die Wax, or conventional lube from a Pad. The story also explains how to use dry lube to slick up the inside of your case necks.
Spray Lubes
High-volume reloaders often turn to spray-on lubricants such as the RCBS Case Slick (#749-001-341) or the Hornady One Shot (#749-001-065) to quickly lubricate large numbers of cases at once. An indispensable piece of gear that helps make spray lubing easy is a lube rack (#749-011-550) — a polymer block that holds cases upright and arranged to maximize their exposure to the spray.
Editor’s Note: Ballistol Aerosol is other good spray product for regular full-length sizing (not heavy case-forming). It goes on clear (no chalky residue), it is ultra-slippery, and it will remove the carbon from your case necks as you apply Ballistol with a patch. This is my primary spray lube — but many folks dislike the distinctive Ballistol smell. Try before you buy.
Sizing Die Wax
Over the years, many benchrest shooters have come to trust Imperial Sizing Die Wax (#749-001-052) for their case lube needs. It offers high lubricity and easily wipes off with a paper towel. In fact, its lubricity makes it a popular choice for case forming, for those wildcat folks who need to form their own unique or obsolete cartridges. Unlike lube pads or spray lubes, sizing wax is applied more naturally. You just put a little on your fingers and transfer it to the cases by handling them. As simple and easy as Imperial Sizing Die Wax is to use, it’s probably best for low-volume applications.
Dry Lubricant
Redding’s Imperial Application Media (#749-001-166) is a dry neck lube used to lube the inside of the neck, whether you’re full-length sizing or neck-sizing only. It consists of ceramic spheres coated with a fine graphite-based powder. You simply dip the neck into the container for a second to pick up the right amount of lube. This lube enables the expander ball to work smoothly throughout the case neck –instead of “grabbing” or “chattering” — to minimize case neck stretching.
Editor’s Note: Dry Lube is also very useful if you ultrasonically clean your cases. After the ultrasound process, the inside of the case neck can be so “squeaky clean” that bullets don’t seat smoothly. A quick application of dry lube will help bullets slide into the neck easier and the neck “grip” on the bullets should be more consistent from round-to-round. Consistent neck tension is key to accuracy and uniform velocities.
Story Tip from EdLongrange. We welcome reader submissions.
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Here’s the best deal we’ve found on an excellent product in high demand. The Lyman BoreCam is an electro-optical borescope with a digital display. You can record “stills” on a SD card. This is one of the hottest products on the market right now — and users really like the BoreCam (although some wish the digital view-screen was larger). Amazon.com now has the Lyman BoreCam for $200.48. Grab it while you can at that price. Other online vendors are charging a LOT more (e.g. MidwayUSA price is $259.99).
2. Anschutz MSR RX22 .22 LR Semi-Auto (Desert Tan), $329.99
Looking for a rifle for the new Practical Rimfire Challenge series (aka “PeeWee PRS”). Here’s a great deal on a semi-auto Anschutz. This semi-auto rifle features modern ergonomics, an AR-type detachable magazine, and a full rail on top (allowing a wide selection of optics). The MSR RX22 features a button-rifled barrel crafted to the same exacting tolerances as Anschütz’s target barrels. The single-stage trigger can be adjusted from 3.3 to 5.5 pounds. The stock adjusts for length of pull and also folds. A front, lower rail allows many options for mounting bipods, barricade stops, and other accessories.
3. Amazon — RCBS Partner Press, $65.99
We own and use the compact RCBS Partner press. Small and easy to transport, the RCBS Partner press is great for loading at the range. It also makes a good secondary press in your loading room for depriming cases or seating bullets. That lets you dedicate your bigger, full-size press for heavy-duty chores such as case sizing. At most vendors, the RCBS Partner Press sells for $80.00 or more. Right now it’s on sale at Amazon.com for just $65.99.
4. Precision Reloading — Berger Bullets Sale
Now through February 8, 2017, Berger Bullets are on sale at Precision Reloading. Score substantial savings on Match, Hunting, and Varmint bullets, including the popular Berger Hybrids. For example, the excellent 7mm 180gr Hybrid is marked down from $51.99 to $45.84, while the .30-Cal 185gr Hybrid is marked down from $52.99/box to $46.75/box, and the 6mm 105gr Hybrid is marked down from $37.49/box to $33.18/box. NOTE: Berger Bullet Sale is limited to current inventory.
5. Grafs.com — Magnetospeed Sporter $179.99
If you have been waiting to get a Magnetospeed… wait no longer. Priced at just $179.99 at Grafs.com, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetospeed’s XFR adapter (sold separately), data can be transferred easily from the display module to your mobile device. READ Magnetospeed Sporter Review.
This EC Technology 22400 mAh Power Pack is what AccurateShooter’s Editor uses to run a LabRadar Chronograph and recharge smartphones and his iPad on the road. This unit charges cell phones very rapidly, and will give an iPad three charges. One nice feature is an LED light near the three (3) ports. NOTE: This unit can recharge itself faster than most battery packs since it has a 2 Amp-capable input port. The $32.99 price is very good — we’ve seen this 22400 mAh Power Pack sell for $45.00 elsewhere.
7. Cabela’s — Federal .22 LR Ammo, 325 Rounds $19.99
Good news — .22 LR rimfire ammo supply is catching up with demand so prices are starting to return to pre-hoarding levels. Here’s a great deal on good basic fodder for fun plinking and plate shooting. We’ve tried this copper-nosed .22LR rimfire ammo in pistols, boat-action rifles, and semi-auto rifles and it functioned fine. Hard to beat this price — $19.99 for 325 rounds with no limit on the amount you can purchase. This 325-round Federal Value Pack is loaded with 36-grain hollow-point bullets.
We like reactive targets. It’s fun to “ring steel” and see a target move instantly when hit. For just twenty bucks (including shipping), it’s hard to go wrong with this 8″ AR500 Steel Gong. The 8″-diameter size is big enough for zeroing at 200 yards, yet offers a nice challenge at 500 yards and beyond. There is also a 6″-diameter model for $16.00.
When shopping for a new riflescope or spotting scope it’s easy to get confused by all the technical terminology. Do you wish you had a better way to compare scopes — beyond just size, weight, and price? Well Swarovski Optik can help. The Swarovski Hunting Blog offers a helpful guide to technical terms used when comparing scope specifications. Here are some important definitions, expressed in layman’s language:
Objective Lens Diameter
The objective lens diameter determines the size of the optical system’s entrance pupil. The bigger the objective lens diameter, the more light the system can capture. However, the size of the objective lens does not determine the size of the field of view.
Exit Pupil
The size of the Exit Pupil is determined by the objective lens diameter and the magnification. If you look at the eyepiece from a distance of around 30 cm (11.8 in), the Exit Pupil appears as a bright disc.
For calculating the Exit Pupil the formula is:
Exit Pupil = objective lens diameter ÷ magnification (expressed in power number).
The larger the Exit Pupil, the more light will reach the eye.
Field of View
The Field of View is the size of the circular section of the area which can be observed when you look through a long-range optical device. In the case of rifle scopes, it is specified at a distance of 100 meters or 100 yards. For example, 42.5 m at 100 m or 127.5″ at 100 yards. As an alternative, the Field of View can also be stated in degrees (e.g. 6.6°).
NOTE: The technically-feasible size for the Field of View is essentially determined by the magnification. The higher the magnification the smaller the Field of View.
Twilight Factor
The Twilight Factor defines the optical system’s performance in poor light. The statement “the greater the twilight factor, the better the suitability for twilight” only applies if the exit pupil is larger than or at least as big as the eye’s pupil. The pupil in the human eye can only open to around 8 mm. As we get older, our eyes become less flexible, which limits our ability to see things in twilight or at night. Therefore [an optic’s] exit pupil cannot always be fully utilized.
For calculating the Twilight Factor the formula is:
Twilight Factor = root of ( magnification x objective lens diameter ).
NOTE: Spotting scopes have extremely high twilight factors because of their high magnification and large objective lens diameter. But [when used at high magnification] their small exit pupil can make them [somewhat difficult] to use in twilight.
The latest 7th Edition of the Firearms Guide is now available as a handy USB Flash Drive, as well as DVD. In addition, you can access the information on the web via an online subscription. (NOTE: the DVD Edition is FREE in combo with a 1-Year Online Database subscription.)
“We listened closely to the market,” says Firearms Guide editor Chris Mijic, “and saw that our online users still want to have a tangible backup copy of Firearms Guide. A lot of them like the DVD Edition which is free with the Online Edition but some of them don’t have a DVD drive in their new computers any more so we created a super-fast USB Flash Drive edition for them.” The Firearms Guide 7th Edition is also published on DVD-Rom for Windows and there is an online subscription service at www.firearmsguide.com.
Choose Multiple Options
USB Flash Drive Edition comes in combo with a 1 Year Online Edition with free updates for only $39.95.
1-Year Online Edition with free updates is only $29.99.
DVD Edition is FREE in combo with a 1-Year Online Edition.
The Firearms Guide 7th Edition represents the world’s largest, fully-searchable firearms, air guns and ammo database, covering 920 manufacturers from 50 countries. Published since 2009, the Firearms Guide covers over 64,000 antique and modern guns, with gun values, photos, and high-resolution gun schematics and blueprints. The Firearms Guide allows up to 14 different search criteria: caliber, year, country, manufacturer, stock, action, price, and more.
The amount of imagery is amazing — there are tens of thousands of photos and over 6300 schematics, which help you work on a firearm or identify key components/parts. Guns and ammo are presented with prices, specifications, features, ballistics, and up to 12 high-rez zoom-able color pictures.
GUN VALUES are provided for dealers and gun collectors. You can access thousands of printable and zoom-able GUN SCHEMATICS (diagrams or exploded views) with parts lists and blueprints for professional gunsmiths.
This shocking photo of destroyed AR-15 bits and pieces was posted on Facebook by William Walter, a firearms instructor. William said this was “The worst AR-15 blow-up I have ever seen. Has anyone else seen one this bad?” It is indeed catastrophic. Seeing the above image, our friend Grant Ubl wrote: “that is most definitely THE most FUBAR’d AR15 that I have ever seen”.
Luckily the shooter sustained only minor injuries — nothing worse than a broken finger tip. But his AR-15 is certainly toast. The lower was polymer. Note the past tense. According to Walter: “It was a polymer lower and polymer magazine. Pieces of both were distributed up to 25 feet from the bench he was firing from.”
The cause of the Kaboom is somewhat mysterious. The Kaboom occurred on the 4th round fired — the first three went OK, and there is NO evidence of a squib load (i.e. no bulge in barrel). This was definitely NOT a .300 BLK round in a .223 Rem Chamber. William Walter suspects that pistol powder may be involved, but that has not been confirmed.
First thing I suspected was bore obstruction, but there wasn’t any sign of it. The case head literally atomized…you can see the brass residue on the parts. The bolt was split in two also. This was number four fired during load testing. The previous three were fine…no high pressure signs on the primer. — William Walter
One Facebook poster noted: “We had one similar here in PA about 14 years ago. The guy used Winchester 231 instead of Winchester 748 and ended up with a pile of parts very similar looking. The rifle went Kaboom on his first sighter in offhand and no one was injured surprisingly. The carrier looked like someone cut it down the middle with a torch very similarly to this picture. It also cut the bottom of the carrier and all three pieces look like a peeled banana.”
Walter stated that here: “[The shooter] had fired four rounds of the same load. He was shooting Win 748…24 grains with a 77 Sierra. I will reserve my theory until after we discuss as to not steer the conversation.
On reading that, Dennis Santiago posted: “Did you mean WW 748? That’s on the fast side powder for a .223 meant for lighter bullets. 24 grains with a long bullet like a Sierra 77 would be way too much.”
Walter noted that there was a possibility of some pistol powder getting into the catridge that detonated: “[The shooter] said he does load pistol and this was first time loading rifle. He said he used his 650 powder measure, but also a funnel and trickler.” Considering that, one poster suggested that maybe pistol powder was still left in the bottom of the powder measure.
It will be interesting to determine what exactly happened here. The remaining rounds from the same loading session will be pulled down and analyzed. A discussion of this incident appears on the Precision Shooting Journal Facebook Page.
Question to our readers: What do you think was the probable cause of this catastrophic Kaboom?
H.R. 788 will help States build and maintain shooting ranges with Federal funding assistance.
Federal Legislation has been introduced that will help build and maintain shooting ranges. H.R. 788, the Target and Marksmanship Training Support Act of 2017, was introduced in Congress by Rep. Duncan Hunter (R-CA) and a bipartisan group of 23 co-sponsors. The provisions of H.R. 788 will help States fund public shooting ranges with Federal Firearms Excise tax revenues.
“This legislation [H.R. 788] would provide state fish and game agencies more flexibility to use Pittman Robertson excise taxes dollars raised from the sale of firearms and ammunition to enhance existing public shooting ranges and to build new ones to meet the growing need for additional places for target shooters to participate in their sport,” said Lawrence G. Keane, NSSF Senior V.P. and General Counsel. “Public shooting ranges provide hunters a place to sight-in rifles and shotguns before hunting seasons, for people to take firearm safety and hunter education courses, and for recreational target shooters to enjoy their sport.”
Since 1937 almost $11 billion has been raised for wildlife conservation through the Pittman-Robertson excise tax on the sale of firearms and ammunition. States are permitted to use some of those funds for hunter education courses and for public shooting ranges under a restrictive formula that has largely discouraged state agencies from building and enhancing public shooting ranges. H.R. 788 will help states use Pittman Robertson revenues by increasing the limit on Federal funding of shooting ranges from 75 to 90 percent. This means states could begin work on range facilities with 10 percent State-supplied funding, instead of the current 25 percent. It would also allow Federal Excise funds to be made available and accrue for five years for land acquisition or range construction.
In addition, the legislation would limit frivolous lawsuits arising from the use of Federal land for target practice and encourage Federal agencies to cooperate with state and local authorities for maintenance of ranges on federal lands.
Story by NRAHuntersRights.org and NRAblog.com
Shown above is the Belfast Wildlife Area rifle range in Kindards, SC. Belfast was the first public, unmanned shooting range opened and paid for completely with funds raised by NRA Grants and the Wildlife and Sportfish Restoration Program … an act made possible through Pittman-Robertson grants. Several other state Natural Resource Departments have followed suit.
Legislative History: The Target and Marksmanship Training Support Act was previously introduced as H.R. 2406, the SHARE Act (Title II), and the Bipartisan Sportsmen’s Act in the last Congress, as well as a stand-alone bill H.R. 2463 in the 113th Congress.
Photo Credit: Top photo shows Mainville Sportsman Club (PA) and Union Co. Sportmen’s Club (PA), both sites of IBS Matches.
If you’ve never visited the NRA Whittington Center outside Raton, New Mexico, it is well worth a visit. This new HD video shows the features of this unique facility where marksmen can shoot from 10 yards to two miles. Drone video footage gives you a “birds eye view” of the scenery and the ranges.
This is an excellent video. Well worth watching, with impressive aerial photography.
The Whittington Center hosts many major matches each year. Along with the training and range facilities, the Whittington Center has comfortable, modern cabins and RV camping zones for extended stays. Founded in 1973, the Center offers ranges for every kind of shooting discipline, along with a shotgun center, firearms museum, specialized firearms training, guided and unguided hunts, plus an adventure camp for younger shooters.
Setting Magnification Levels
Sizing Die Wax
When shopping for a new riflescope or spotting scope it’s easy to get confused by all the technical terminology. Do you wish you had a better way to compare scopes — beyond just size, weight, and price? Well 
