We have always liked Tikka actions, and now there is a great re-barreling option for Tikka T3 owners. Criterion Barrels Inc. (CBI), makers of “pre-fit” barrels for Savage, Remington, and Rem-clone actions, will soon be offering Tikka pre-fits. These pre-chambered barrels for Tikka T3 actions will be headspaced with a barrel nut, just like a Savage.
Click image for full-screen version
The new Tikka T3 pre-fit barrels will be sold through Solid Accuracy, a respected Texas-based outfit that sells high-end scopes, stocks, barrels and other rifle components. Criterion tells us: “The Solid Accuracy barrel nut and wrench design has been finalized, the prototype barrels tested and the barrel nuts are now going through production (with an expected ETA of 2-3 weeks). All orders for these pre-fits barrels are currently heading out to the shop floor for production. Orders placed this week can expect a conservative estimated lead time of 14-16 weeks.”
The accuracy has been impressive with Solid Accuracy’s test rifle, which features a Tikka T3 action mounted in a KRG X-Ray chassis. This prototype rifle is chambered in 6.5 Creedmoor. The group below was shot with a stout load of H4350 and Sierra 140 grain MatchKings seated .009″ in the lands.
The folks at Criterion are excited about the Tikka pre-fit project: “We’re looking forward to getting these barrels out the door and on to some custom rifle builds.” One of Criterion’s staffers was so impressed with the initial test results that he is building his own T3 project, with a Criterion pre-fit of course…
Share the post "Tikka TECH — Criterion Pre-Fit Barrels Coming Soon for Tikka T3"
In recent years, Forster Co-Ax® presses have been somewhat hard to find, as demand has out-stripped supply. However, right now Grafs.com has Co-Ax presses in stock, at just $299.99 — that’s six percent off the regular price. This sale price includes a set of jaws, and includes ground shipping (in the lower 48), after a single $7.95 (per order) handling fee. If you’ve been hankering for a Co-Ax press, now is definitely a good time to buy.
If you are not yet familiar with the many unique features of the Forster Co-Ax, we recommend you watch the video embedded below. This shows how the press operates and highlights the design elements which set the Co-Ax apart from every other reloading press on the market.
Video Shows Special Features of Forster Co-Ax Reloading Press
Forster Co-Ax Press Video Review
This is a very thorough review of the Forster Co-Ax done by Rex Roach. This 14-minute video shows the key Co-Ax features, explaining how the floating case-holder jaws work (3:30 time-mark), how the dies are held in place (4:40 time-mark), how spent primers are captured (6:10 time-mark), and how to set the primer seating depth (10:00 time-mark). We’ve used a Co-Ax for years and we still learned a few new things by watching this detailed video. If you are considering purchasing a Co-Ax, definitely watch this video start to finish.
The Co-Ax case-holder features spring-loaded, floating jaws. These jaws have two sets of openings, small and large. This allows the system to adapt to various rim diameters. The jaw plates can simply be reversed to switch from small jaw to large jaw. In the photo above, the Co-Ax is configured with the large jaw openings in the center.
When shooting pistols do your shots normally land smack dab in the middle of the target? If not, you may have some technique problems that are causing your shots to move off center. Top Shot Champion Chris Cheng has produced a good video for the National Shooting Sports Foundation (NSSF) that helps handgunners diagnose accuracy issues. By shooting 3-shot groups and looking at the pattern and location of the shots, you can see what you’re doing wrong (or right). Here are some examples. Note, this process works best for shooters whose shots fall typically in one target zone. If your shots are all over the target, your form is inconsistent and problems will be harder to diagnose.
1. Low Left — Jerking Trigger: Here we see three (3) shots at the 7 O’clock position. This shows that the shooter is jerking the trigger, meaning that the shooter is pulling the trigger too quickly and therefore forcing the barrel to drop when breaking the shot. This is a very common problem, particularly with novices who are reacting to the noise/recoil of the pistol.
2. 9 O’Clock — Too Little Trigger Finger: If we see three (3) shots at the 9 O’clock position, what this can be indicative of too little trigger finger on the trigger. And therefore with every shot, the shots are getting pushed to the left. Try moving your trigger finger on to the pad of your index finger. Also try dry firing drills.
3. High Left — Anticipating Recoil: In this next example, we see three shots around the 11 O’clock position. What could be happening here is that the shooter is anticipating the recoil, and is actually lifting the gun up when he shoots. We recommend slowing down, working on your breathing, and, again, do dry-firing drills.
4. 3 O’Clock — Too Much Trigger Finger: Finally, if you see three (3) shots at the 3 O’clock position, this can indicate that there is too much trigger finger on the trigger. Therefore when the shot breaks the shooter is pulling each shot to the right. Note: Each of these descriptions is for a RIGHT-handed shooter. If you are a left-handed shooter you’ll want to reverse those descriptions.
Share the post "Handgun 101: Diagnosing Accuracy Problems with Pistols"
Seating primers is kind of a “dark art”. Many top shooters prefer to seat “by feel” using a hand tool. Others prefer bench-mounted tools that offer higher work-flow rates — with a good bench tool you can prime more cases in a given amount of time, plus it’s easier on the hands.
There have been many bench-mounted priming options — Forster has a tool, as does RCBS, and Lee. But there is a new player in the game — Primal Rights of South Dakota. And Primal Rights’ new Competition Primer Seater (CPS) may be the most precise bench priming tool yet offered to the public. It is certainly the most expensive. This patented tool costs $600.00! But the CPS delivers something special — superb, repeatable depth control, along with the ability to prime 1000 cases per hour. For some reloaders, that precision + productivity will justify the high price.
The Primal Rights CPS is built like a Swiss watch — the machining is beautiful. It also uses some unique internal engineering to achieve a superb “feel” when priming. Unlike some other tools, it is also very easy to adjust — simply turn a wheel to adjust seating depth. You can see this in the photos — the word “Deeper” with the directional arrow.
Operation of Competition Primer System Shown in Video:
Key Features of the Primal Rights CPS, as stated by the manufacturer:
Speed with Precision: Some priming tools are very fast. Others are very precise. The CPS is the only priming tool to combine both features into a single unit. You can achieve seating depths accurate to within a thousandth of an inch, all while priming at a comfortable rate of over 20 cases per minute. At that pace you can easily prime over a thousand cases per hour.
Precision Primer Seating Depth Control: The CPS has a revolutionary adjustable shell holder system which allows you to raise and lower your case in relation to the priming rod. You can seat the primer deeper or shallower in .001″ increments. The adjustment mechanism has tactile and audible clicks to ensure you stay on your desired seating depth. One click = One thousandth of an inch adjustment.
Integrated Shuttle Feeding System: The CPS uses a manually-operated shuttle system to slide primers from the primer tube into position over the primer rod. This ensures that any jams or misaligned primers are easily and safely discovered by the operator.
Check Out Competition Primer Seater Gear Review on Rifleshooter.com
Our friend Bill at RifleShooter.com has just released a detailed review of Primal Rights’ bench-mounted priming tool. He was very impressed with the Primal Rights CPS, finding that it was fast to use yet very precise, with great feel: “The CPS uses a rotational drive system to seat primers. Unlike the lever systems you’ll normally encounter, this allows you better feel as the primer seats. The CPS is expensive. However, it is a solid tool. Amortize it over the time you’ll be reloading and it’ll be worth every cent. If you load a lot of precision ammunition and have the budget to support it, take a look at the CPS. I found it is a game changer. I wish I had one twenty years ago!” READ REVIEW.
Say Hallelujah. These are pallets of Hodgdon H4350, something that’s been very hard to find recently. Check with Bruno’s, Graf’s, Midsouth and Powder Valley very soon.
Hodgdon H4350 has been the Holy Grail of reloading powders — highly desired but near impossible to find. For many popular cartridges such as 6XC, 6.5×47, 6.5 Creedmoor, and .260 Remington, H4350 has been the powder to beat — the “gold standard” for accuracy, low ES/SD, and temp stability. Unfortunately, H4350 has been in very short supply for the last couple of years. Major vendors such as Grafs.com, Midsouth and Powder Valley have been back-ordered for a long, long time.
But now that may change. Hodgdon has received a very large supply of H4350, and has started shipping pallets of the popular powder this week. The photo above was taken May 9, 2017. Hodgdon announced: “We have a lot of powder going out the door most days, but we have some special powder going out again this week. This should be on your local reloading shops’ shelves in the next couple weeks. Reloaders, rejoice!” If you’re in need of H4350, we recommend you contact your favorite shooting shop or online distributors soon. And guys — buy what you need, but don’t horde. Leave some for other shooters.
The new Sig Kilo 2400 ABS RangeFinder raises the bar among compact LRFs on the market. This unit offers class-leading ranging ability, combined with an Applied Ballistics solver, handy mobile App, and even a plug-in windmeter. If you are considering getting a new Laser Rangefinder (LRF), you should definitely consider the new Kilo 2400 ABS. With a $1499.00 price, this unit is not inexpensive. However, you’ll be hard-pressed to find any other compact LRF that offers better performance (or more sophisticated features) for the money. Here are highlights of a field test by Andy Backus of Longrangehunting.com. READ FULL FIELD TEST HERE.
— Claimed Ranging ability: Deer (1400 Yds), Trees (1800 Yds), Reflective Steel (2000 Yds).
— Syncs with iOS and Android smartphones via Mobile App (Bluetooth Compatible).
— Embedded Applied Ballistics Elite calculator with bullet database.
— Onboard temperature, air pressure, and humidity sensors.
— Display shows hold-over, wind direction/speed, density altitude, and shot angle.
— Scan mode refreshes at ultra-fast 4 times per second.
— Lumatic™ OLED display automatically calibrates brightness to changing light conditions.
— Lightweight magnesium housing with binoculars-style eyecup and diopter adjustment.
by Andy Backus, Longrangehunting.com
The Kilo’s scan mode is outstanding and is an important reason that it outperforms other rangefinders. I can’t think of any reason not to always use it on scan mode. The results are instant. The fact that the Kilo’s laser seems to be perfectly lined up with its reticle is another reason for its outstanding ranging performance. I think the size of the circular reticle and corresponding beam divergence of the laser is just about perfect. Because of the outstanding scan mode, the fact that the beam is smaller than some other rangefinders does not mean that you can’t do a good job of ranging freehand. And the relatively small beam means that the max range outperforms most other rangefinders.
Cycling through the menu and making changes to the settings on the KILO 2400 rangefinder is fast, simple and intuitive. The options are easy to read and understand.
One other slight negative I noticed is that it is hard to feel the RANGE button being depressed when wearing gloves. I would prefer a more noticeable click when depressing it.
Using the Mobile App with Ballistic Solver
The Sig Kilo 2400 ABS comes complete with a mobile App featuring the Applied Ballistics solver. This allows you to create profiles for various rifles and loads. Once you create the profiles and provide ambient altitude, temperature, and wind values, the Kilo 2400 will give you a ballistics solution via its onboard display. To range a target and get a ballistic solution you simply push the RANGE button. The first number that appears in the rangefinder is line of sight distance followed two seconds later by your elevation holdover and two seconds later by your wind hold (in MOA or MIL). The KILO 2400 will continue to cycle through the three numbers every two seconds for 30 seconds.
Great Features for Hunter in the Field
The array of on-board sensors along with the built-in Applied Ballistics solver mean that the KILO 2400 is capable of providing an instant and very accurate ballistic solution including wind hold with the push of a single button out to very long range. As a long range hunter this is exactly what I want.
The automatic brightness adjustment on the KILO 2400 seems to work flawlessly. No matter the lighting conditions on the day I tested, the KILO’s display was perfectly visible.
You hold the RANGE button down to take advantage of the KILO 2400’s outstanding scan mode and its precise circular reticle displays at just the right brightness level for the lighting conditions. The first number you see displayed on the KILO 2400 is 637 yards and it climbs as the scan mode follows the buck walking away from you. You let go as he stops at 642 yards and the KILO 2400 instantly tells you to dial your scope turret to 11.2 MOA. It also tells you that for a 10 MPH, 90 degree cross-wind you should hold 2.4 minutes. You estimate the full wind value to be about 5 MPH so you’ll hold 1 1/4 minutes.
Syncing Features and Remote Laser Activation
When synced to the KILO 2400 via Bluetooth, the Mobile App displays real-time information from the rangefinder including the line-of-sight range, elevation hold-over, and wind correction. It also displays temperature, pressure, density altitude, energy at target, and velocity at target. You can also enter a specific wind speed on this screen and quickly sync it to the KILO 2400.
One other cool feature on this screen is the opportunity to remotely fire the rangefinder. I played around with this a little bit when I had the KILO 2400 mounted on a tripod and I was trying to get the absolute farthest range I could. By firing the rangefinder remotely there was absolutely no wiggle from pressing the RANGE button on the rangefinder.
Complete Kit with Key Accessories
The Sig Kilo 2400 ABS comes complete with a a nice carry case, tripod mount, and even wind-meter that plugs into your mobile device. You get all this…
- Padded Ballistic Nylon Case
– TYR Water Resistant Molle Gear Bag
– Lanyard (Neck-strap)
- Wind Meter (plug-in for mobile device)
– One-Piece Machined Tripod Mount
– Sig Sauer Tactical Pen/Stylus
Share the post "Sig Kilo 2400 ABS Laser RangeFinder Review"
On Ammoland.com, there’s an interesting article about the NSSF’s recent 3-Gun Fantasy Camp in Las Vegas. Author Duncan Johnson attended the Camp last month and wrote an “after action report”. He said the Camp was a great experience, and his shooting improved greatly with the expert tutoring from top pros: “If you have ever wanted to try a 3-Gun competition, just go do it, you will quickly find out why this is the fastest-growing shooting sport today. If you are new to shooting and or just getting started in 3-Gun, I 100% recommend you attend the NSSF Fantasy Camp.”
Here are Four Tips/Observations Duncan learned during the 3-Gun Fantasy Camp:
1. Use a Zoom Rifle Optic – “The LWRC 3-Gun ready rifle [provided for the Camp] was topped with a Leupold Mark 6 1-6x20mm riflescope, which made distance shooting much easier than the AimPoint optic [on my own AR]. 3-Gun competitions have rifle stages that can involve distance shooting out to ranges of 500 yards or more. For that reason, most shooters in the 3-Gun TacOps and Practical divisions use magnified riflescopes like the Leupold Mark 6 or the Vortex Strike Eagle.”
2. Use Your Quads and Core Muscles — “There are also a lot of little things that the pros teach you… For instance, some shooters instinctively bend their knees to enter their stance, but once they start firing they tend to follow the recoil with their shoulders and end up leaning back. In order to avoid that, use your quad muscles in your legs to get a solid stance that will absorb more recoil. Also use your core muscles to maintain a strong stance, especially in shotgun stages. The combination of strong quad and core muscles will contribute to controlling muzzle flip and moving onto your next target more easily.”
3. Vision-Based Target Transitions — “Another pro tip from Randi Rodgers on transitioning from target to target with a pistol was using your eyes rather than your sights to switch targets. So imagine it as pull the trigger, the slide starts to come back, using your eyes find the next target, then point with the front sight, find the sight picture, fire, and repeat.”
Editor’s Note: A few seasons back, I attended an action shooting seminar taught by Randi, and she explained the “move your eyes” technique. For multi-target stages, this really works. Move your eyes from target to target, and you’ll find your arms automatically “pull” the handgun into position. You still need to get the sights on target, but this method yields create smoother, faster stage runs.
4. Trigger Control and Use of Support Hand — If you don’t have good trigger control and pull straight back, you can move your sights during the shot. This is a common problem with novice pistol shooters. The solution is lots of dry fire training. Duncan found out he needed work: “In my case, the biggest area where I need improvement was shooting my pistol. There were two different things I was doing that will guarantee a missed shot every time with a handgun. When I pull/squeeze/depress my trigger I have a tendency to also pull the gun off target, resulting in a miss to the low left of a target. I [also] over-apply pressure with my shooting hand. According to the pros, pistol grip should be 40% shooting hand, and 60% supporting hand.”
This article originally appears on Ammoland.com, reprinted here under Creative Commons License.
Share the post "Multi-Gun Mastery — Report from 3-Gun Fantasy Camp"
Some custom barrel makers are now honing barrels (after drilling) to improve bore diameter uniformity, smooth the interior finish, and reduce barrel lapping times. For years, large-scale manufacturers of hammer-forged barrels have employed honing. Now the process is being used by smaller, “boutique” barrel-makers. This article explains how and why barrel honing is done. Take the time to watch the video. For anyone with an interest in barrel-making, this video is an eye-opener…
Barrel Honing Process Demonstrated (Worth Watching!):
For custom barrel makers, honing is a time-saver and cost cutter. A few minutes on a honing machine can cut lapping times in half, leaving a cross-hatched surface finish in single or low double-digit Ra. Honing is the same process used to make diesel fuel injectors with bore roundness and straightness controlled to fractions of a micron (<0.000040″), with surface finish Ra ≤0.15 µm (6 µin).
A key manufacturing process used for hammer-forged barrels is now getting attention from the makers of custom button-rifled barrels. This process is precision bore-honing. Honing produces a high-quality bore surface fast, which is critical to hammer forging. (Why is honing so important with hammer forging? Surface finish is the one feature of the barrel that cannot be controlled in hammer forging. Surface imperfections in a barrel blank tend to be amplified as the blank is formed on the rifling mandrel. And if the bore is chromed afterwards, imperfections in the surface finish become even more obvious.)
Honing dramatically improves bore diameter size uniformity and accuracy, surface finish and roundness throughout the length of the barrel. It can certainly be used in place of a pre-rifling lap. The chief difference between a lapped and honed bore is the direction of the finish lines in the bore. Honing leaves fine spiraling crosshatch lines, while a lap leaves lines going longitudinally in the bore. After rifling the manufacturer can remove the crosshatch finish with a quick lap if desired. Honing is fast, accurate, and can be automated. Its surface quality and geometry can duplicate lapping, except for the longitudinal lines of the lapped finish.
Frank Green of Bartlein Barrels told us: “We worked with Sunnen and we did all the initial testing on the prototype machine for them. The machine works great! We ordered and received last year a new manufactured machine with the changes we wanted on it and we just ordered a second one a month or so ago. Should be here next month.”
Many of our readers have been interested in learning how modern bullets are made. While a “boutique” bullet-maker, supplied with appropriate cores and jackets, can craft bullets using relatively simple hand dies and manual presses, factory production is different. The major bullet-makers, such as Barnes, employ huge, complex machines to craft their projectiles on an assembly line.
Modern hunting bullets are made with a variety of sophisticated (and expensive) machines, such as Computer Numerical Control (CNC) lathes, giant multi-stage presses, and hydraulic extruding machines that draw lead ingots into lead wire. Barnes offers an “inside look” at the bullet production process in a series of videos filmed at its Mona, UT factory. We’ve embedded four videos from the series here. These videos can also be viewed on the Barnes Bullets YouTube Channel.
Milling Slots in TSX All-Copper Bullet
This video shows how the slots (between the drive bands) in the TSX all-copper bullet are cut. The slots reduce the bearing surface that contacts the rifling. This helps reduce friction and heat, extending the life of barrels used with all-metal, drive-band bullets:
Varminator Bullets Produced in Jumbo Transfer Press
Here is the transfer press used in the production of Varminator and MPG Bullets. The process begins with a giant spool of flat copper material. The copper is stamped into jackets and eventually the formed Varminator bullets are ejected one by one into a bucket.
CNC Lathe Turns Bullets Automatically
In the video below, a Bar-Feed CNC crafts mono-bloc bullets from metal bar stock. Barnes uses a small CNC lathe to turn .50-caliber bullets from brass bar stock. We’re not sure which bullet is being made in this video. The material looks to be sintered metal. In the close-ups you can gold-colored shavings from when the machine was previously used for CNC-turned brass bullets.
Accuracy Testing in 100-yard Tunnel
Barnes regularly tests bullet samples for accuracy. In the video below, a Barnes technician loads sample rounds and tests them for accuracy in a 100-yard tunnel. The rounds are shot through a special fixture — basically a barreled action connected to parallel rods on either side. This allows the testing fixture to slide straight back on recoil (see it move back at 1:07-08 minute mark). Note how the tester actuates the trigger, which is oriented upwards, just the opposite of a normal rifle. The technician taps the upward-pointing trigger shoe lightly with a metal rod. Could this upside-down trigger orientation be useful in benchrest shooting — perhaps with railguns? It could make for an interesting experiment.
Story suggestion by EdLongrange. We welcome reader submissions.
Share the post "How Bullets Are Made — Videos Reveal Process at Barnes Bullets"
Pat Reagin of PMA Tool took some cool new products to the range this past weekend. Look carefully at the photo above. That’s not a standard bag-holder on the SEB NEO rest, and that stylish black rear bag doesn’t look anything like an Edgewood or Protektor. The rifle is also sporting the new-generation Weaver 46x48mm T-Series XR Side-Focus Scope.
Lenzi Rear Sand Bag
Pat tells us: “We are now carrying rear bags made by Italian benchrester Alberto Lenzi. Made in Italy, these Lenzi bags are AWESOME! They are available for short range and one that is slighty taller for long range.” The Lenzi rear bags feature a big, 8″x6″ footprint with a thick, slightly concave base that sits very flat on the bench top. Lenzi bags are very stable with a reassuring “dead” feel on the bench. Guys who have tried this bag really like it. Pat says: “I can’t explain it, but the bag seems to absorb energy/recoil better than other bags — the gun tracks a little better and I get back on target really well.” CLICK HERE for more information: Lenzi Long Range Rear Bag | Lenzi Standard Rear Bag.
– Black leather with Cordura at stock contact points with blue stitching.
– 1/2″ flat between medium ears.
– Heavy 8″x6″ base with built-in “donut”.
– Weight about 15.5 lbs filled with heavy sand in bottom & white sand in ears.
Lenzi Replacement Top for SEB NEO Front Rest
A common complaint about the SEB NEO rest is the rest top, specifically the three-piece bag. This rest top made by Alberto Lenzi (an Italian benchrest shooter) addresses the issue by replacing the entire rest top. The rest top features a more conventional design and includes a traditional style front bag that conforms to IBS and NBRSA rules.
The Lenzi Top with Super-Slick Bag is $269.95, while the bag alone is $79.95. You can also get the Lenzi NEO Replacement Top with an Edgewood bag for $275.95. Finally there is a new Lenzi Cordura style bag that fits this system — you can special request that.
Weaver 46x48mm T-Series XR Benchrest Scope
Weaver’s new 46-power T-Series XR scope features a 30mm main tube with side parallax adjustment. Clicks are 1/8 MOA, with 44 MOA windage and elevation travel. Pat Reagin reports: “It’s clear enough. The clicks are a little mushy, but positive. Eye relief is great.”
Available reticles are Fine Crosshair (FCH) and 1/16 MOA Target Dot. Current “street price” is around $900. Amazon currently has the Target Dot Version for $898.99 with free shipping.
Share the post "Hot New Benchrest Gear from PMA Tool"
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
Each week, Cabelas.com offers select Guns of the Week at special discounted prices. This week one choice is a special 200th Anniversary Remington 700 ADL with upgraded stock. This handsome rifle is $100.00 off, marked down to $549.99 from $649.99. The figured Walnut stock features deluxe Fleur de Lis checkering, plus a Commemorative grip cap. This special model 700 ADL with 24″ blued barrel is offered in three popular chamberings: .243 Winchester, .270 Winchester, and .30-06 Springfield.
This Master Tumbler Kit contains everything you need to tumble rifle or pistol brass. Now on sale for $53.46 with free Prime shipping, this Kit contains: Vibratory Tumbler, Rotary Media Separator, Plastic Bucket, 3 lbs. Cleaning Media, and 4 oz. Brass Polish. NOTE: We considered this an excellent deal when it was priced at $67.99. At $53.46 it is a total steal — you could easily pay that much for a decent vibratory tumbler alone.
3. Grafs.com — 60 for 60 Specials Starting Tuesday, May 9th
This year Graf & Sons is celebrating its 60th year in business. To mark this milestone, Graf’s is having a series of big sales, with huge discounts (up to 60%), and some free product give-aways. This Tuesday, May 9th, Grafs.com will run a special 60 for 60 Flash Sale. This starts at 12:00 PM CT and has items up to 60% off, plus prizes including Free Ammo. An example of the great deals are Walker Ear Muffs at $4.99, 60% off the regular $11.99 price. NOTE: Flash Sale starts TUESDAY May 9, 2017.
4. Monmouth Reloading — Nosler RDF Bullets, $28-$29 per 100
Nosler’s line of RDF (Reduced Drag Factor) bullets have high BCs for their weight. Precision shooters are reporting outstanding accuracy. Given their high performance and consistency, RDF bullets represent a superior value. At Monmouth Reloading you can get Nosler RDFs for under $29 per 100 for popular 6mm, 6.5 mm, and .30-Cal sizes. That’s up to $20 less per box than some premium brands.
There’s a new line of primers on the market, produced by Czech factory Sellier & Bellot. You can save up to 30% compared to name-brand American primers. For example, the S&B Small rifle primers are now just $19.99 at Cabelas.com, compared to $28.00 for CCI Small Rifle Primers at Powder Valley. We’ve shot the S&B pistol ammo and it was very reliable so we wouldn’t hesitate to use these primers for practice ammo in rifle or pistol. This is an attractive option for high-volume reloaders.
You don’t need to spend big bucks for an effective spotting scope to view mirage. You can get the Kowa TSN-601 Angled Body for just $269.00 from B&H Photo. An eyepiece will run another $275.00 or so. Though relatively inexpensive, the TSN-601 is used by many top marksmen. This doesn’t have the resolution of the $1500+ spotters but this is fine for viewing mirage and spotters.
7. Grafs.com — Magnetospeed Sporter $178.99
If you have been waiting to get a Magnetospeed… wait no longer. Priced at just $178.99 at Grafs.com, the Magnetospeed Sporter model costs less than half as much as Magnetospeed’s V3 models. This chronograph attaches directly to your barrel so you don’t have to go downrange to position tripods and set up skyscreens. For most people the Sporter Model contains all the features they need. Using Magnetospeed’s XFR adapter (sold separately), data can be transferred easily from the display module to your mobile device. READ Magnetospeed Sporter Review. Brownells also has the Magnetospeed Sporter at $179.99, and (for a limited time) you can get FREE Shipping with Brownells CODE “MAY”.
8. Sportsman’s Guide — CCI .22 LR Ammo, $3.49 per Box!
This is the cheapest price we’ve seen in a long time for name-brand .22 LR Rimfire ammo. The sale price of $3.49 per 50-ct box works out to just seven cents a round for this 40gr CCI Blazer rimfire ammo. At that price can enjoy rimfire plinking without worrying about cost — just like the “good old days”. Member price is even lower — $3.32 per box. Grab this CCI Ammo at this rock-bottom price before it sells out.
We use 1″-diameter Target Spots for sight-in and practice at 100-300 yards. These bright red/orange self-adhesive dots are easy to see. At 100 yards the high-contrast black diamond centers provide precise aiming points. We found this 10-pack of target spots on Amazon at a rock-bottom price. You get 630 total stick-on dots for just $9.65 with FREE Shipping. You can also get 360 Birchwood Casey 1″ dots from Midsouth for just $3.15, but shipping is extra. If you’re already ordering something from Midsouth, you may want to add the dots to your order.
This is versatile, affordable funnel system works with virtually all cartridge types, from 17 Remington up to 500 S&W. Even if you have a fancy metal funnel, its worth having one of these kits on your reloading bench. The RCBS Quick Change Powder Funnel Kit features five (5) adapters that match case mouth diameter for efficient loading: 17-20 caliber, 22-264 caliber, 27-284 caliber, 30-375 caliber, 40 caliber and higher. The Funnel Kit includes a handy 4-inch drop tube.
Share the post "Bargain Finder 85: AccurateShooter’s Deals of the Week"
We first ran this story a couple years back. We’re republishing it today as a reminder to our readers that safety should be their paramount concern at the range. Avoid distractions and always check your barrel for obstructions before you chamber a round or pull the trigger. A moment of inattention can result in a catastrophic kaboom …
Discharging a .338 Lapua Magnum round with a cleaning rod in the barrel — that’s a recipe for disaster. What happens when a fired .338 caliber bullet and a cleaning rod try to occupy the same place at the same time? Well you get a catastrophic kaboom, with metal pieces flying all over the place, and a shooter very lucky to escape without serious injury. This incident occurred recently in Manatee, Florida, as reported by Sniper’s Hide member Queequeg. We thank SnipersHide.com for granting permission to publish these revealing images in the Daily Bulletin. CLICK HERE for more Kaboom info on the ‘Hide.
This story should serve as a chilling reminder to follow proper safety practices whenever you are at the range. Always check to make sure there is no obstruction in the bore BEFORE loading a live round.
.338 Lapua Magnum + Cleaning Rod + Inattention = Kaboom!
Kaboom at Manatee!
Sniper’s Hide member Queequeg recently published shocking photos of a catastrophic kaboom involving a .338 Lapua Magnum (Savage action). The action was blown off the rifle, shrapnel went through the roof, and the barrel split at the tenon before taking an excursion downrange. The action did crack in the front but the lugs remained engaged so the bolt did not slam to the rear (luckily for the shooter).
Here’s the report: “This happened [January 20, 2014] at the Manatee Gun and Archery Club. Al, Ren and myself were there with a couple other folks. Ren was at bench 12, I was at 13. The fellow at 11 was running a Savage .338 Lapua. He had a very bad day! He damn sure could have killed himself and quite likely Ren as well.”
Queeqeg added: “After the boom, I heard Ren ask ‘Are you alright’ and then turned to look in time to see the fellow reacting in total shock — literally stunned. Ren and I went over to him and could not see any major injuries. Ren was uninjured as well but had a lot of fiberglass splinters on him. The barrel nut is what I presume punched the two holes in the roof. The shooter is a regular there[.] He had been having a problem with sticky cases though he said he was certain the loads were mild. That’s why he was content to knock the sticky ones out with the rod. He simply forgot to remove the rod after knocking out the last stuck case. You can see what happened next.”
To learn more about this incident, go to the original Snipers Hide Forum Thread. There you’ll find more details and over four pages of related discussions.
The Important Lesson Here
What did the .338 LM shooter do wrong here? You will say — “Well that’s obvious, he left a cleaning rod in the barrel and then shot a round.” Yes, that was a potentially fatal error. But that was his second mistake — one that occurred only because he made a more fundamental judgment error first.
The FIRST mistake was not acknowledging the problem with his ammo. Had he heeded the warning signs, he would still have a rifle (and an unsoiled pair of trousers). When he first observed that he was having problems with extracting cases, a warning light should have gone off in his head. Presuming his extractor was not broken (and that the chamber was cut properly) he should have been able to extract his brass if he was running safe loads. The lesson here we all need to learn is that if you observe a serious ammo-related issue, it is time to stop shooting. Don’t try to invent work-arounds just to extend your range session, when there are clear signs that something is wrong, very wrong.
Share the post "Your Worst Nightmare: Catastrophic .338 Lapua Magnum Kaboom"
Many of our readers have been interested in learning how modern bullets are made. While a “boutique” bullet-maker, supplied with appropriate cores and jackets, can craft bullets using relatively simple hand dies and manual presses, factory production is different. The major bullet-makers, such as 
