Custom Rimfire F-Class Rifle for a Grand-Daughter
The dots and dashes are Morse Code for the shooter’s initials. The wood is Mango with Walnut fore-end wing inlays. The barreled action is an older Anschutz Model 54 that spent years in a prone stock.
Build Report by Doan Trevor
How do you build a stock for the grand-daughter of an award-winning shooter? Over the years I have built five or six rifles for this shooter, and now his grand-daughter had taken an interest in F-Class. He wanted her new rifle to mirror his own F-Class rifle, and he provided me with an old Anschutz Model 54 barreled action. Her new rifle would get her started in rimfire with the possibility of graduating to High Power (centerfire) shooting. The dots and dashes on the sides of the stock are Morse Code for his grand-daughter’s initials — “AMS”.
Rimfire F-Class Stock Design Factors
Typically when I build a rimfire F-Class stock I use the same pattern as I do for High Power stocks. The pattern has evolved from my prone stocks, as it has proven very successful with time. Also, there is a known issue of using wood for a stock in F-Class. The wood needs to be cured, and unfortunately, finding wood in the specific dimension for the stock is near to impossible. Therefore, I inlay pieces in the fore-end making sure that it is straight and on center. Other materials can be used for an F-Class stock, but keeping them straight and centered can be very difficult. Using cured wood during the build process, I continually check the centerline from fore-end to the rear slider, ensuring that the stock stays centered. This helps ensure good tracking and return to point of aim.
Adapting Prone Stock for F-Class Use
There is a current trend of older Palma and prone shooters to convert their rifles for F-TR and F-Open due to eyesight problems and other disabilities. The stocks that they have been using (and loving) can be recycled to their new shooting styles with a few design changes. I have been doing this successfully for the last several years. Whether it be a new shooter or an older one, you can either plan for the future or adapt older equipment so that all can shoot the style that they want. My philosophy in rifle building is to create every rifle with the potential to win a national or world championship. I am proud to say that I have build rifles for Derek Rodgers, Trudie Faye, Lige Harris, Barry Smith, Eric Rhodes, Kent Reeves, Terry Glen and many more award-winning shooters. And I look forward to many more.
What the Heck is .22 LR Rimfire F-Class?
There is no official NRA F-Class rimfire discipline (at least not yet). However, many F-Class shooters (both F-0pen and F-TR) employ .22 LR rifles for low-cost training. For example, James Crofts practices extensively with his 40X rimfire F-TR rig. In addition, many shooting clubs offer F-Class style rimfire fun matches, shot prone with front rest or match bipod. This rifle was built for an F-Class fun match hosted regularly by the Los Angeles Rifle & Revolver Club (LAR&R).
The photo below displays a different Doan Trevor-crafted rifle, a rimfire benchrest rig with Turbo action. This shows how Doan makes the 3-inch-wide fore-end. Outboard left- and right-side wings are bonded to the central stock material, then the wings are carefully shaped for straightness. Getting the geometry “just right” helps the rig track perfectly.
Similar Posts:
- Doan Trevor Creates a Lightweight Wonder from Koa Wood
- When Light is Right — Two-Pound Koa Wood Silhouette Stock
- 2-Lb Koa Silhouette Stock — Doan Trevor’s Lightweight Wonder
- Lightweight (2-lb) Koa Wood Wonder Stock from Doan Trevor
- Doan Trevor Carves a Silhouette Special from Koa Wood
Tags: .22 LR, 40X, Anschutz, Doan Trevor, F-Class, F-Open, F-TR, James Crofts, Model 54, Rimfire Cross-Training
