Displayed are results with Federal Gold Medal Match — quite impressive accuracy!
Criterion Barrels has published an interesting Ammo Comparison Test, shooting seven (7) different varieties of .223 Rem ammunition out of an AR15 fitted with Criterion Barrel. Each ammo type was chronographed (10-shot string), then five-shot groups were shot at 100 yards. Along with handloads (69gr Sierra MK + Varget), six (6) types of commercial ammo were tested:
PREMIUM Type Ammo:
Federal Gold Medal Match (69gr SMK)
Creedmoor 75gr HPBT
Prime 77gr OTM (Open Tip Match)
BULK Type Ammo:
Federal American Eagle XM193 (55gr FMJ)
Wolf Gold (55gr FMJ)
Wolf Polyformance Steel Case (55gr FMJ)
Here are the results for the four best commercial ammo types tested: Federal Gold Medal Match (GMM) with 69gr SMK, Prime 77gr OTM, Creedmoor 75gr HPBT, and American Eagle XM193 (55gr FMJ). The Gold Medal Match shot the best of all factory ammo tested. In fact, the GMM even shot slightly better than the handloads, which averaged 0.79″ for the three accurized groups.
The results are quite interesting. The Federal GMM actually shot the best, beating “untailored” handloads. Basic accurizing efforts and a much better rest set-up showed significant benefits with most ammo types (but not the bulk Wolf Ammo). As you would expect, the more expensive ammo shot best: “Chart 1.2 [below] showcases the average [after accurizing] five-round group sizes with each type of ammunition at 100 yards, while Chart 1.3 lists the price per round of each ammunition type. It becomes immediately evident by reviewing these two graphs that there is an inverse relationship between group size and factory ammunition price.”
Accurizing Improvements — Better Scope, Better Rests, Accu-Wedge
As you would expect, some basic accurizing efforts improved accuracy with the better ammo. The accurizing process included: 1) Swapping to a Vortex Viper PST Gen 1 6-24x50mm optic; 2) Adding an Accu-Wedge; 3) Improving fitment during reassembly, and 4) Switching from Harris bipod to a Sinclair Front Rest and Edgewood rear bag for added stability. The same 1:8″-twist Criterion barrel was used throughout the testing process.
If you shoot an AR15, or even shoot a .223 Rem bolt gun with factory ammo, you should probably read this test in full. Criterion put a lot of time into the testing, and experimented with a variety of AR options showcased in a series of YouTube videos. SEE: Accurizing the AR-15 Video Playlist.
Share the post "AR-15 Accuracy with Factory Ammo — Surprising Results"
There has been a long wait, but Hodgdon H4350 powder is now showing up at vendors across the nations. Some of our favorite online retailers have H4350 in stock now, in both 1-pound and 8-pound containers.
Bruno Shooters Supply has the large, 8-lb jugs for $199.95 and H4350 1-lb containers for $31.95. Bruno’s also has most of the other popular Hodgdon powders in stock now.
Powder Valley has one-pound containers of H4350 in-stock now for $26.55. That’s an excellent price.
Precision Reloading has H4350 one-pounders for $26.99 and 8-lb jugs for $216.99. You should probably act quickly, because this may sell out soon. Precision Reloading also has good inventories of other popular powders.
Share the post "Hodgdon H4350 Powder Available Now, Both 1-LB and 8-LB"
Report by Craig Arnzen, Area419.com
It’s easy to think about shooting your first precision rifle match and worry about all of the gear and trinkets that you may need to make it through. In reality, the old rules apply — keep it simple.
We wanted to put together for you a no-nonsense list of the Top Five Gear Items you need for your first match. This list focuses on the “must-have” items you’ll need for PRS-Style competitions.
1. A Rifle (That is Reliable and Sub-MOA Accurate)
Your rifle is the most obvious piece of kit, but we can give you a little more information. Most of the guys you’ll find out there are shooting 6.5 Creedmoor. Yeah, there are guys using .308 Wins and 6mm Dashers, but the 6.5 Creedmoor makes up more than half of the rounds shot in PRS competition, when looking at both national and club matches. Your comp rig needs to be mag-fed and shoot better than 1 MOA. It DOESN’T need to be better than 0.5 MOA (half-MOA). With most targets being 2-3 MOA in size, a half-MOA gun will do just fine. More accuracy is better of course, but you don’t need an exotic quarter-MOA rig to win.
[Editor’s NOTE: PRS does offer a Gas Gun division, but most guys start out with a bolt-action rifle, which will be less maintenance-intensive than an AR-platform rig.]
Muzzle brakes, like our Area 419 Hellfire, are also very popular as much of the PRS game is recoil management. If you can’t see your misses, you’re sure to have more of them.
The rifle also needs an optic with repeatable clicks and a reticle with Mil- or MOA-based hashmarks. The clicks can be either Mil system or MOA system (Mil is more common), so long as the click values match the reticle (i.e. you don’t want 1/4-moa clicks with a Mil-marked reticle). How much power do you need? Anything that zooms in the mid-teens will suffice. I could shoot a match with a fixed 12X scope and not feel disadvantaged. We love the Kahles K624i, if you’re looking for a suggestion.
Oh, and you’ll want a bipod — but the choice in bipod deserves a whole separate article by itself. Nothing wrong with starting out with a Harris swivel. Then you might look at different bipods on other competitors’ rifles for comparison.
2. Ammunition — Factory Ammo and Hand-loads
Good ammo is important, but as we discuss above, 0.5 MOA is good enough. Also, speed is great but it matters FAR less than you’d think. Drop can be calculated with precision, and distances are normally known, so a slightly flatter trajectory doesn’t really matter. Wind matters, but the difference you’ll find when eeking out that last 50 fps is very, very small.
Federal, Hornady, and Prime all make quality ammo that is widely used by shooters from local to national matches. Facebook photo by CReece.
Precision Handloads
If you want to run down the rabbit hole of finding that perfect ammo that shoots in the “twos” (0.2 MOA), get yourself an AutoTrickler and some of our billet aluminum accessories — you’ll love the setup.
3. A Versatile Support Bag
There are countless bag options. But there is ONE bag you’ll see everywhere, and for good reason. The Game-Changer from Armageddon Gear is aptly named. Many shooters use it as a barricade bag as well as a rear bag, meaning a guy could get away with using only this bag for an entire match. If you need another bag when you get there, ask someone in your squad, they’ll share. I promise.
4. DOPE (Reliable Ballistics Info)
We’re not talking the kind of Dope you may find in a match outside Denver — we are talking about the kind that feeds you ballistic solutions. The software-enabled Kestrel is a very common item on the range, but you’ll also see lots of guys using mobile Apps such as Shooter or Applied Ballistics Mobile, and they have great results.
It’s also handy to have an armband or an item like the Hawk Hill data card holder for stages with various targets at differing ranges. Once the RO says “engage” and your mind stops working, you’ll appreciate having it written down.
5. Hearing Protection
PRS Competitors shoot with brakes and sometimes in enclosed spaces. That’s why you need serious hearing protection. We recommend NRR 33 earplugs, doubled up with Electronic Muffs to hear range commands. I have used the 33 dB NRR Mack’s foamies at matches for most of the last year, and the Howard Leight NRR 33 Max-1s are also very effective. The budget-priced (under $50) Howard Leight Impact Sport Electronic muffs work well, but premium electronic muffs may be more comfortable.
Growing in popularity are high-tech, in-ear digital units like the ESP Stealth. I have a set of linked ESP Steaths on the way and hope to evaluate them soon. These are supposed to be very good, but the ESP Stealths cost $2100.00 per pair!
Think we missed something? Have more questions? Let us know.
Contact: Team@Area419.com
Share the post "What You Need to Get Started in PRS Competition"
At the request of our readers, we provide select “Deals of the Week”. Every Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Natchez — Bushnell 6-18x50mm Trophy, $79.99 after Rebate
Looking for a decent medium-power zoom optic for a varmint rifle or rimfire rig? Here’s a great deal on a name-brand scope with side-focus parallax and good warranty. This 6-18x50mm Bushnell Trophy certainly won’t compete with an elite scope, but at $129.99 it’s hard to go wrong. A verified buyer reports: “Likely a best buy/solid value purchase. Glass is good, probably best in this price range. Used for targets — [it was] clear, and focuses down to about 10 yards.” The reticle is Bushnell’s Multi-X — the lines are fairly thick, but it will work for general varmint and target duties. NOTE: This Trophy Scope also qualifies for a Bushnell $50 Trophy Bucks Rebate (good through June 30, 2018). That $50 Rebate lowers your net cost to just $79.99!
2. CDNN — Colt Competition AR15 Kit, $599.99
The Colt Kit does NOT include barrel, bolt carrier group, charging handle, or magazine.
This affordable Colt AR15 Kit includes upper, complete lower, handguard, and Magpul stock. To this, add your choice of barrel and optic. We like this option because the barrel is so important to accuracy and overall performance. This Colt package costs $599.99. Add a match-grade, finish-chambered barrel from Criterion or Krieger, plus bolt carrier group, and you’re in business. The Magpul PRS stock features a quick-adjustable cheek-piece and butt-plate — allowing you to easily adapt head position and LOP for your discipline of the day. The straight-toe PRS stock works great in a rear bag. This is a good platform for a PRS Gas Gun Division rifle.
3. Amazon — RCBS ChargeMaster Lite, $186.99
Need a good, modern electronic scale/dispenser? The modern ChargeMaster Lite offers good performance for the price — now $186.99 at Amazon and $187.49 Brownells. But at Brownells, with Code NCS you can get $15 off and free shipping — lowering your net cost to $172.49! That’s a killer deal — other retailers are charging up to $260.00 for this machine. Once calibrated, we found the ChargeMaster Lite’s dispensing to be very accurate. RCBS claims +/-0.1 grain. This newer machine is a bit easier to program than the original ChargeMaster. Verified purchasers have been happy, but with one complaint: “You cannot turn off the beeping. The [original ChargeMaster] has a way to mute the beeping. This one does not.” Take note.
4. LabRadar Chronograph — $50 Off, Sale Ends June 24
If you’ve been wanting to get a LabRadar Chronograph, now’s a good time. You can now save $50 on this very advanced piece of technology — probably the most sophisticated chronograph system ever offered to the general public. That’s notable because you almost never see this discounted below the $559.95 MAP price. You can save $50.00 on this unit now through June 24, 2018. This is a factory-authorized, once-a-year Summer Sale. The sale extends through 6/24/2018. You can get the LabRadar from top vendors including Creedmoor Sports, Bruno Shooters Supply, and Midsouth Shooters Supply.
Get a Ruger Precision Rifle in 6mm Creedmoor for $899.99 complete. That price, which includes rings, is great for a Gen 2 model. If you’ve been thinking of purchasing a Ruger Precision Rifle (RPR) chambered for the 6mm Creedmoor cartridge, this is a killer deal. Right now CDNN Sports is offering this popular tactical rig for under $900.00, in the 6mm Creedmoor chambering. This shoots faster and flatter than the 6.5 Creedmoor — so many PRS guys have switched to it. This is a good choice for the PRS production class, or you can take in to another level of performance with a Pre-Fit 26″ cut-rifled barrel from Krieger. This is the lastest RPR Gen 2 version with the upgraded handguards. Heck of a bargain boys — you can pay $1200 or more elsewhere for the same rifle.
6. EuroOptics — Leica CRF 2000, $399.00
This may be the best deal we’ve seen on the vaunted Leica 2000-B Laser Rangefinder (LRF) with 7-power optic. This unit is rated out to 2000 yards on reflective objects (in real-world use it will laze a deer well past 800 if you can hold steady). The Leica 2000-B features air pressure and temperature sensors, plus on-board inclinometer. Angle correction works out to 1200 horizontal yards equivalent, with the true hold-over displayed in both MILs and MOA. The compact Leica CRF 2000-B weighs just 6.5 ounces and measures 4.5″ L x 2.25″ H x 1.25″ W. It has a waterproof outer shell.
7. Champions Choice — Deluxe 58″-Long Rifle Case, $68.00
Many of our readers shoot Palma, F-Class, and ELR rifles with long barrels (up to 35″). It’s difficult to find high-quality, well-padded cases that fit very long rifles. Champion’s Choice offers just such a product, the 58″ Deluxe Soft Rifle Case. With thick 1″ padding on each side, big pockets, and backpack straps, this black/blue/white gun case has earned rave reviews from our Forum members. There’s plenty of room for big scopes, and it even comes with an internal tube to hold your cleaning rod.
8. Amazon — MTM AC4C Ammo Crate with 4 Ammo Boxes, $24.99
Here’s a very cool product from MTM at a great price. The versatile MTM AC4C Ammo Carrier features four, lockable polymer ammo cans in a fitted, four-slot 23.5” x 11.3” x 7.5” carry crate. This makes it easy to haul four full ammo cans. Actual purchasers have raved: “Moments after I received this storage box set I ordered another. Very well built and great design. Awesome and a steal at the price.” Right now this is on sale at Amazon for just $24.99 with free prime shipping. The system includes four lockable, O-Ring 11.3″ x 7.2″ x 5″ ammo cans (AC30T) for multi-caliber ammo storage. The crate even includes tie-down points for transport in a cart or ATV. NOTE: Earlier this summer this MTM AC4C system sold for $39.99. The current $29.99 price represents a 25% savings!
9. Amazon — Howard Leight MAX NRR33 Earplugs, $8.22/50 Pairs
20 Pairs
50 Pairs
These Howard Leight NRR33 Max plugs are your Editor’s favorite foam earplugs. Between shooting, motorcycling and mowing lawns, I probably have Max plugs in my ears 2-3 days a week. This is a very good price for a bulk pack of 50 pairs. And if you act soon, you can get free shipping to boot.
Share the post "BargainFinder 142: AccurateShooter’s Deals of the Week"
UPDATE: At approximately 6:00 pm CT, the Brownells YouTube Channel was restored. We don’t know why or how — but apparently protests from Brownells customers many have played a part in getting YouTube to relent. Brownells just issued this statement via Facebook:
PREVIOUSLY…
The Brownells YouTube channel has been terminated (shut down) without warning or notice from either YouTube or its parent company, Google. On June 9, 2018, at roughly 2:00 am, the Brownells channel was pulled from YouTube. This removed ALL Brownells YouTube content, including videos that cover firearms safety, hunting skills, firearms maintenance, and marksmanship. YouTube didn’t simply block Brownells’ gun sales-related videos — it shut down the entire Brownells channel, which had offered nearly 1800 helpful videos. The Brownells channel had acquired over 67,000 subscribers since its launch in January 2007.
History of YouTube Policies on Firearms Content
No specific reason for the Brownells shut-down was provided by YouTube, but this is part of a policy shift by YouTube. For quite some time, YouTube has been de-monitizing firearms-centric YouTube channels. As a result, gun video producers no longer receive advertising revenues, or receive a fraction of what they were once paid. Then in late March, YouTube announced tough new policies limiting the type of firearms content allowed. Gun content producers feared YouTube’s new policies might doom their channels. With the Brownells ban, it appears those fears were correct…
Ars Technica reported: “YouTube is placing more restrictions on weapons-related videos, focusing on guns with new, forthcoming policy changes. According to a Bloomberg report, YouTube intends to ban videos that ‘promote or link to websites selling firearms and accessories’, including bump stocks, beginning this April. The new policy will also prohibit instructional videos that detail how to build firearms. YouTube took similar action after the Las Vegas shooting last year by banning gun-modification tutorials.
‘We routinely make updates and adjustments to our enforcement guidelines across all of our policies,’ a YouTube representative said in a statement to Bloomberg. ‘While we’ve long prohibited the sale of firearms, we recently notified creators of updates we will be making around content promoting the sale or manufacture of firearms and their accessories’.”
YouTube prohibits certain kinds of content featuring firearms. Specifically, we don’t allow content that:
Intends to sell firearms or certain firearms accessories through direct sales (e.g., private sales by individuals) or links to sites that sell these items. These accessories include but may not be limited to accessories that enable a firearm to simulate automatic fire or convert a firearm to automatic fire (e.g., bump stocks, gatling triggers, drop-in auto sears, conversion kits), and high capacity magazines (i.e., magazines or belts carrying more than 30 rounds).
Provides instructions on manufacturing a firearm, ammunition, high capacity magazine, homemade silencers/suppressors, or certain firearms accessories such as those listed above. This also includes instructions on how to convert a firearm to automatic or simulated automatic firing capabilities.
Shows users how to install the above-mentioned accessories or modifications.
Share the post "YouTube Terminates Brownells YouTube Channel — Then Relents"
If you didn’t catch our Deals of the Week last Monday, here’s another “heads up”. If you’re thinking of getting a LabRadar chronograph, now’s the time to buy. You can save $50.00 on this unit now through June 24, 2018. Take note — these devices are controlled with MAP pricing, so you won’t see other discounts. This is a factory-authorized, once-a-year Summer Sale.
This sale is notable because you never see this discounted below the $559.95 MAP price. The sale extends through 6/24/2018. You can get the LabRadar from top vendors including Creedmoor Sports, Bruno Shooters Supply, and Midsouth Shooters Supply.
About the LabRadar Chronograph
The LabRadar is probably the most sophisticated chronograph system ever offered to the general public. It is extremely precise yet easy to deploy. The LabRadar’s Doppler Radar technology offers many advantages compared to the traditional analog chrono — no tripods needed, no ambient light required, works on any type of projectile, no matter what caliber or speed. The LabRadar records all shot velocities, then calculates velocity extreme spread (ES), average velocity, and standard deviation (SD). It can also export all your shot data to your computer or laptop. And very soon a new LabRadar Mobile App will be offered that will let you control your LabRadar with an iOS or Android smartphone.
The LabRadar Ballistic Velocity Doppler Radar Chronograph can track a wide range of devices, calibers, and projectiles. It works with airguns, handguns, rifles — even suppressed weapons. (It can even time arrows fired from bows.) A key advantage of the LabRadar is that is can be set to the SIDE of your rifle — you don’t need to go downrange to set up screens on a tripod. You can put the LabRadar right on the bench. Ace shooter and bullet-maker Bart Sauter even uses his LabRadar during matches.
Full LabRadar Field Test/Review by Ray Gross
If you are considering purchasing a LabRadar Chronograph system, we strongly suggest you read the very thorough and informative LabRadar Review by Ray Gross, past Captain of the USA F-TR team.
Share the post "LabRadar Chronograph Summer Sale — Save $50.00"
Summer’s here, so many folks will head to the hinterlands on prairie dog safaris. On a good P-Dog adventure, you may shoot hundreds of rounds over a long weekend. So you’ll need plenty of ammo. With these ammo volume requirements, you probably won’t have time to load to benchrest standards, and you may not have the budget for match-grade bullets. To save time you may throw (rather than weigh) your charges, or even load on a progressive press. This all raises the question of ammo accuracy — how good is “good enough”? A Sierra Bullets expert answers that question here — explaining how to efficiently load ammo for varmint work.
Ammunition Accuracy Requirements 101 — Varmint Ammo
This story based on article by Sierra Bullets Chief Ballistician Tommy Todd
I load and shoot ammunition for a living. In my duties here at Sierra I constantly test bullet accuracy for our production needs. Because of this, I shoot a variety of different calibers and cartridges on a daily basis and a large demand of this shooting is keeping the guns and loads tuned for optimum accuracy. I have a very narrow window of tolerances to maintain in order to provide our customers (you) with the most accurate bullets on the market.
I have learned many tricks and techniques over the years to tuning a load, prepping brass, and cleaning barrels to keep a gun shooting. I often utilize the things I have learned and take them to extreme levels when competing in a shooting event. I also often ignore most of these things (other than safety) and simplify the process if the shooting I will be doing does not warrant.
Recently I went on a prairie dog shoot in Wyoming with some good friends. The targets cooperated as did the weather with the exception of some challenging winds we experienced. We had a great time and make a lot of hits on those small rodents. When loading for the 223 Remington rifles and the TC Contender, I cut a few corners in the ammunition-loading process due to both time constraints and accuracy needed. When shooting at a prairie dog a miss is simply that, but when shooting at say the X-ring at 1000-yard competition, a poorly-placed shot [harms your] placing in the match. Because of this, I can afford to miss an occasional shot at a varmint due to ammunition capability without worry but will not allow the same tolerances in my match ammo. For the Wyoming trip I utilized a powder measure and simply dumped the charges into primed cases that had been full-length sized and primed.
I had measured enough for length to know that while there was some variance all were under maximum length. I know there is some variation of the measure I utilized but not significant enough to warrant weighing every charge. When seating the bullets a competition seating die was used and I verified OAL on the occasional cartridge to make sure nothing changed.
The ammo produced shot under one inch at 200 yards in one of the guns I planned on taking on to Wyoming with me. [Editor: That was for TEN Shots — see below.] I knew I had loaded ammunition that was quite suitable for the task at hand which was evidenced by the number of hits I was able to make at fairly long range.
NOTE: The author, Tommy Todd, explains that, when loading ammo for F-Class matches, he uses more exacting methods. He weighs every charge and seats his bullets carefully with an arbor press. Todd adapts his methodology for his particular application. The lesson here is to load to the level of precision demanded by your discipline. READ Full Story HERE.
Share the post "Varmint Ammo — How Good is “Good Enough”?"
The Colt Kit does NOT include barrel, bolt carrier group, charging handle, or magazine.
Thinking of building an AR-platform rifle for varmint hunts or PRS Gas Gun Matches? Here is an interesting option from Colt — a value-priced kit with upper, complete lower, handguard, and Magpul stock. To this, add your choice of barrel and optic. We like this option because the barrel is so important to accuracy and overall performance. This Colt package costs $599.99. Add a match-grade, finish-chambered barrel from Criterion or Krieger, plus bolt carrier group, and you’re in business.
There are some very nice features on this Colt Comp Kit. The Magpul PRS stock features a quick-adjustable cheek-piece and butt-plate — allowing you to easily adapt head position and LOP for your discipline of the day. (You may want a different LOP for prone shooting vs. bench shooting). The Magpul stock works well in a rear bag. In addition the handguard comes complete with Picatinny rails on top and on both sides, affording lots of options. We might move one of the rails to the bottom, however, so it could be used for a bipod mount. The upper receiver has an integral Picatinny rail for optics.
We like the Blackhawk grip which is more comfortable than the typical grips supplied by most black rifle makers. The lower includes a trigger group, but you can later upgrade to a Timney, Geissele, or other aftermarket trigger system.
Add Your Favorite Premium Barrel:
NOTE: This Colt Kit features a Sadlak Low Profile .750 Gas Block and carbine-length gas tube. With longer barrels you may need to adapt a longer tube, but that is an easy change.
Share the post "Colt AR-15 Comp Rifle Kit — Good Option for DIY Gas Gun Build"
American shooters have been enjoying Irish hospitality this week in Ireland, while attending attending the Emerald 2018 match at Midlands National Shooting Centre of Ireland (Tullamore). Our friends James Crofts, Phil Kelley, and Aussie Jenni Hausler provided these images from the event — both at the range and off. The Yanks are off to a good start. James reports: “Day one scores are out and Team USA is on top. Madison Bramley topped F-Open and I held on for F-TR. I also won the 1000-yard match. My equipment performed flawlessly — rifle built by Keith Weil of KW Precision, Cerus Stock by Will McCloskey, and BRM action by Jim Borden.”
American Phil Kelley posted: “As always our hosts are outstanding. Man, love this range! Ready for the big match starting tomorrow.”
Phil Kelley enjoyed the Team Match and long-range Clays Fun Match which preceded the main event. Phil posted: “A great day, with a busy line at 1100 and 1200 yards in Ireland. Last fun day included some great competition. Team USA did well. After getting completely destroyed at 1100 yards, I was able to win the 1200 yard match; with a miss! First ever board miss, it’s only 6’ wide. 12-14 mph winds with a lying, heavy mirage.”
The day finished with a fun (and challenging) Clay Pigeon Shoot at roughly 1235 yards. Phil noted: “Ellis Berry, James Crofts and myself were one of only a handful to hit the 4.25″ clay target within 5 shots in these conditions.” Think you can do that? That 4.25″ clay bird represents a mere 0.338 MOA at 1200 Yards! Not easy folks…
Competitors in the Clay Pidgeon Shoot at 1200+ yards.
Posting on Facebook, Mias Nieuwoudt had an interesting observation about the challenge of 1200 yards: “On average it seems the old 308s ran out of steam compared to our F-Open rigs at 1200 yards. Maybe a 40° scope rail with the targets angled backwards at 30° so you can lob the points like mortars!”
Touring the Emerald Isle — Countryside and Castles
On June 5, Phil Kelley observed: “Another great group touring day. A morning stop at Donamass Castle ruins provided incredible Irish views, then on to the town of Kilkenny for the Smithwicks Brewery tour, visit to Kilkenny Castle and a walk on the Medieval Mile.”
Interior of Kilkenny Castle
Nancy Tompkins (left) and Michelle Gallagher (right) give a shout out to friends.
The American contingent — enjoying the good life in Ireland.
Facebook Photo Credits: Jenni Hausler, James Crofts, Phil Kelley, Pat Hunt, the Bramleys.
Share the post "Yanks Enjoy Irish Hospitality at Emerald Match"
More than 200 shooters from around the country will make their annual pilgrimage to the home of the U.S. Army Marksmanship Unit this weekend as the week-long USA Shooting National Championships for Rifle and Pistol kick off Sunday in Fort Benning, Georgia. The National Championships start Sunday, June 10 and run through June 16. This event is free and open to the public.
This year’s National Championship will also be the first Nationals where the new ISSF shooting format will be in place, with men and women taking the same number of record shots in competition.
National titles and slots on the National/National Junior/National Paralympic Teams will be up for grabs as athletes compete in individual Olympic and Paralympic events in Rifle and Pistol disciplines, as well as Men’s and Women’s 50m Prone Rifle, Men’s 25m Center Fire and Standard Pistol and Men’s 50m Free Pistol. This match will also serve as the selection match for the 2018 International Shooting Sport Federation (ISSF) World Championships to be held August 31 – September 15 in Changwon, South Korea. Shooters who’ve already earned slots on the World Championship Team will be looking to Nationals as as a tune-up prior for the Worlds.
Among the notable Rifle athletes who will be competing in Fort Benning are three-time Olympic medalist Matt Emmons, 2016 Olympic gold medalist Ginny Thrasher, and two-time Olympian Michael McPhail of the USAMU. Emmons and Thrasher posted the top finishes for American Rifle athletes this year on the ISSF circuit. Emmons just missed the podium at the April 2018 World Cup in Changwon, finishing fourth in Men’s Three-Position Rifle. Thrasher finished fifth in Women’s Air Rifle at the World Cup in Fort Benning just three weeks ago.
Paralympic Competition Draws Shooters from Many Nations
In addition to the National Championships, this event is also a World Shooting Para Sport-sanctioned (WSPS, formerly IPC) match so Paralympic athletes from the U.S., Ireland, Canada, Ukraine and Columbia will also compete in this match across the Paralympic Rifle and Pistol events.
Brian, a gunsmith at GA Precision, built this rimfire rig with GAP colleague Anthony Soukup.
We’re seeing great interest in .22 LR rimfire tactical cross-training. With a rimfire rig, you can practice regularly for a fraction of the cost of centerfire training. That way you can build your skill set without breaking the bank. Decent rimfire ammo can be had for five cents a round. Compare that to fifty cents (or more) for handloads and maybe $1.00 per round for factory ammo.
To help with rimfire cross-training, here are some of our favorite rimfire tactical targets, all in easy-to-print PDF format. Click each target image to download the FREE target. You’ll find more free targets for load development, precision practice, and fun shooting on our AccurateShooter FREE Targets Page
Aim Small, Miss Small
At 25 yards, this is a fun rimfire plinking target. At longer distances it can actually be a great training target for precision centerfire shooters.
Targets for Rimfire Training and Fun Matches
Here’s a rimfire training target with “big to small” target circles. Start with the largest circles, then move to the smaller ones in sequence. This systematic drill provides increasing challenge shot-by-shot. Novices often are quite surprised to see their accuracy improve as they move from bigger to smaller aiming points. That provides positive feedback — always a good thing.
Right Click and “Save as” to download printable PDF versions of target.
Rimfire Practice Targets
SPECIAL BONUS–Rimfire Tactical Precision Targets
These FREE targets by DesertFrog are offered in Adobe Acrobat format for easy printing. CLICK HERE to download all six targets as a .ZIP archive.
Vudoo V-22 State-of-the-Art Tactical Trainer
Some of the most talked-about .22 LR tactical trainers are being produced by Vudoo Gun Works. These rimfire rigs offer the size, weight and feel of real PRS rifles, though they shoot affordable .22 LR ammo. The 40X-style Vudoo V-22 action also feels and operates more like a full-size centerfire action than a typical skinny, rimfire receiver. This helps competitors translate rimfire practice to centerfire success.
The Vudoo Gun Works V-22 rimfire repeater action, arguably one of the best tactical rimfire actions available, owes its lineage to the respected Remington 40X action. Many rimfire matches have been won with 40X actions, so we understand why Vudoo chose that design for a starting point. Vudoo then added some important enhancements.
More Free Targets…
These and many other free targets are available at MyTargets.com.
Share the post "Tactical Target Time — Free Targets for Rimfire Cross-Training"
For 2018, Lyman has introduced a new 8-station turret press, the All American 8. There are two other new Brass Smith presses from Lyman — a compact C-Frame Ideal Press and a sturdy O-Frame Victory single-stage press that competes with the RCBS Rock Chucker. With its eight-station capacity, strong cast iron construction, we think the All American 8 will become popular. With a $195 street price, the 8-station Lyman is $100 cheaper than the 7-station Redding T-7. No question, that’s a significant price advantage, and we believe Lyman will take sales from Redding.
Our friend Gavin Gear of UltimateReloader.com got his hands on one of the new All American 8 presses, and he’s created an informative video showing press set-up and loading function. Gavin was excited to work with this beefy new turret press: “Why has this Lyman press been anticipated so highly since its announcement? A few reasons are: the 8-station capacity, cast iron construction, on-press priming system, ambidextrous design, and turret rear support for repeatable sizing and bullet seating. Plus, it’s made right here in the USA!” To learn more about the All American 8 turret press, watch Gavin’s video:
More Stations = More Reloading Options
Gavin said the press works well — he liked having 8 stations, because this offers more flexibility. With eight stations, you can have four two-die sets, or three two-die sets plus a dedicated decapping die and a powder measure. Gavin notes: “I’ve owned many reloading presses, including 3-station, 4-station, 5-station, and 7-station variants, but I’ve never owned an 8-station press until the Brass Smith All-American 8 came to the shop. I’ll have to say… you can’t get too many stations, especially on a manually-indexed turret. I love the idea that you can leave dies on the press, and load multiple calibers/chamberings using the same turret setup.”
Primer Function Works Well
Gaving also seated small and large primers using the on-press priming system. The Lyman All-American 8 turret press comes complete with all of the parts needed to seat both large primers and small primers. Gavin observed: “The All-American 8 loads quite well! Once I cleaned out the primer tube (always do that on a new press) the priming system worked perfectly, and I had no issues getting up to ‘full turret speed’ after getting into the groove.”
Why Use a Turret Press
This Editor has used a six-station RCBS Turret press for many years. I keep a dedicated decapping die on that press, as well as sizing and seating dies for pistol cartridges. My high-volume 9mm and .38 SPL reloading is done on a progressive press, but the RCBS turret allows me to have dies for two larger pistol chamberings — .44 Magnum and .45 ACP — at the ready. While we recommend single-stage presses for precision rifle reloading, the turret press offers great flexibility for handgun hand-loaders who shoot numerous cartridge types. And if having six die stations is good — having eight is even better. Advantage Lyman.
Share the post "Beefy New 8-Station Turret Press from Lyman"
