Do you have a concealed carry permit, or do you plan to carry a concealed handgun in the future? Then you can benefit from Beretta’s FREE 15-page e-book, Ten Essential Tips for CCW Holders. This eBook, in handy PDF format, helps gun owners select an appropriate handgun (and holster), understand legal obligations and responsibilities, and train effectively with the firearm. This short eBook offers many useful tips to consider, in particular for gun owners who are contemplating the pros and cons of everyday carry for themselves.
As the Beretta CCW booklet says, “Carrying a concealed handgun requires a certain amount of confidence. You need to be confident in your knowledge of laws and regulations. You have to have confidence in your accuracy, and you need to trust that you can carry a gun effectively, securely and comfortably. If a gun is a burden for you to carry, you probably won’t.”
Surprising Facts About Actual Defensive Handgun Use
You may be surprised to learn when and how handguns are actually used for self-defense. Most defensive uses are at very short range and the incident only lasts a matter of seconds. You need to be prepared, and train to be proficient drawing and aiming your weapon. And remember, shooting is a last resort, when a safe retreat is not available.
55% of gunfights take place in 0-5 feet.
20% of gunfights take place in 5-10 feet.
20% of gunfights take place in 10-21 feet.
95% of gunfights take place in 0-21 feet. (Source: FBI)
The average man can cover 21 feet of ground in 1.5 seconds.
The average gunfight is over in 3-5 seconds.
3 to 4 shots are usually fired.
Most gunfights take place in low-light conditions.
On average, one shot in four strikes someone.
Here are two (2) sample pages from Beretta’s CCW eBook.
Product innovation is all about “building a better mousetrap”, or in this case, building a better bore-cleaning patch. A real smart guy, Shane Smith, has invented a triangular patch that earned a patent. The U.S. Patent Office has awarded a utility patent for BoreSmith’s triangular Pyramid Patch™. This unique cleaning patch was designed by Shane Smith, a mathematician/physicist who employed his scientific and firearms knowledge to create innovative bore-cleaning products.
BoreSmith’s clever Triangle Patch™ (aka Pyramid Patch) presents more cleaning surface area to the bore wall than does a conventional square or round patch (of equivalent size). At the same time, the unique geometry makes Triangle Patches much less likely to jam in the barrel. This is because the notches in the sides of the triangle allow the patch to sit more uniformly on the jag (without bunching up). In addition, the Pyramid patch is must less likely to jam due to pleating. One reason conventional patches get stuck is unwanted 5-layer pleating. The special notches in the Pyramid patch remove all or most 5-layer pleating. As a result the patch does not bunch up and this also reduces rod bowing.
Triangle Patch Function and Geometry Explained (See 1:18 time-mark):
NOTE: Despite what you may see in this video, you should ALWAYS insert brushes and patches from the chamber end first, using a fitted cleaning rod bore guide. With bolt-action rifles, NEVER insert a cleaning rod (with brush or jag) in through the muzzle. This may damage the delicate crown of your barrel.
Twice a year, select-fire fans head to the Knob Creek Gun Range in West Point, Kentucky, for the nation’s largest Machine Gun Shoot. A bi-annual event, the Machine Gun Shoot is typically held on the second weekend of both April and October. The latest Machine Gun Shoot is happening RIGHT NOW. It started on Friday, October 12th and runs all weekend through Sunday the 14th. The highlight of every Machine Gun Shoot is the Saturday Night Shoot, where scores of guns send regular and tracer bullets down-range. An estimated 1.25 million rounds will be expended during the October Night Shoot.
Participants are machine gun dealers, collectors and enthusiasts from all over the country. The Machine Gun Shoot itself consists of three days of machine gun shooting, dealer displays, shooting competitions and the spectacular Saturday Night Shoot. Participants shoot at a wide variety of used appliances, abandoned vehicles, and barrels of fuel with pyrotechnic charges attached. The pyrotechnic charges are set off by bullet impacts, creating large mushroom clouds and fireballs. With the tracers and explosive fireballs, this is an amazing experience. Check out the video:
Click Triangle to Watch Knob Creek Machine Gun Shoot Video (Warning: Very Loud Audio)
A few seasons back, Top Shot Season 4 Champ Chris Cheng was on hand to record the firepower. Chris writes: “About an hour before dark, folks are out on the range setting up all sorts of explosives while a crowd builds, anxiously awaiting what we all know is coming. The lights go out, and the next thing you know machine guns are going off for almost 20 straight minutes. This year’s October 2013 edition did not disappoint. Check out the video below — other than the beginning, my favorite part is at the 5:50 mark [when a Mini-Gun opens fire from the right].”
Beretta, makers of fine shotguns, rifles, and pistols, also owns Finnish rifle-maker SAKO. In this article, which first appeared in the Beretta Blog, hunting guide Mia Anstine writes about her visit to the Sako factory and her live-fire shooting test to secure her hunting permit. CLICK HERE for full story.
Visiting the SAKO Factory in Finland, by Mia Anstine
What a joy to wake up in Finland and prepare for a tour of Sako. I enjoyed a European breakfast with a view of downtown Helsinki. Shortly I joined the hosts and writer’s group, and we boarded the bus for a ride to Riihimaki, to the manufacturing facility.
Sako built its original manufacturing facility during World War I. To this day they still utilize the original buildings but have also grown over the years to include larger production areas and updated equipment.
Video shows Sako Rifle-Making and Hunting in Finland’s Backcountry (worth watching):
Beretta Holding’s acquisition of the Sako company brought additional opportunity for growth. The company added state-of-the-art machinery which has aided in increased production. However, they’ve still maintained their signature quality-built products by keeping the human element integrated throughout the production line.
After a quick tour of the Sako facility, we headed to the shooting range. We shot a number or Sako and Tikka rifles, but first, we sighted in our hunting rifles in preparation for a brown bear and moose hunt. I would be hunting with a Sako model 85 Hunter chambered in 9.3 mm. (Editor: For fans of this big 0.366 caliber, Sako offers both 9.3x62mm and 9.3x66mm Sako chamberings).
Hunters Must Pass Marksmanship Tests
To hunt bear in Finland, you must first pass a hunting test as well as shooting test. The timed, live-fire event [requires] five rounds in the kill zone of a brown bear at 100 meters. Of course, the ever-courteous Finns had ladies go first, so I felt more than a bit of pressure, and I know I shot a bit faster than necessary. Regardless, I cycled rounds and passed with ease.
Next, we headed to a different bay at the shooting range where we experienced the hunting test from days of old. In this test, we shot from standing position at a moose target. First, we shot three rounds in the kill zone, from 100 meters, and then three at the moose target as it raced by, from right-to-left and left-to-right, at 20 kilometers per hour. While this test is no longer required, it was a pleasure to try our hands at it.
The Burris Eliminator III is an advanced electro-optical device that combines magnified optics with a built-in laser rangefinder and micro-processor. With the push of a button the Eliminator III ranges your target. Then the micro-processor “brain” instantly calculates the required holdover for that distance, and displays a red dot on the reticle. Simply put the red dot on the center of your target and pull the trigger.
Now through December 31, 2018 you can save $100.00 on the purchase of the 4-16x50mm Burris Eliminator III LaserScope. That’s a significant savings on a proven product. We think this LaserScope is particularly handy for varmint hunters working a large prairie dog field, with critters near and far, at ranges from 100 out to 800 yards. With the Eliminator, you can range a P-Dog mound instantly, then just place the red dot on the animal and you’re good. No fussing with drop charts or scope clicks. Of course you still have to make a wind call, but the Eliminator also helps with your hold-offs. The handy X96 reticle has horizontal hold dots, and a digital display shows how many dots to hold off for a 10 mph crosswind with your cartridge.
How To Get $100 Rebate
Purchase a Burris Eliminator III 4-16x50mm LaserScope (Item # 200116 or 200119) and get a $100 Rebate. (Other models do not qualify).
To receive the Burris $100 Mail-in Rebate, you must submit three things: 1) Proof of Purchase; 2) Original UPC Code from product box; and 3) Mail-In Rebate Form. Send all three items to this address:
Ruger has gone big — very big — with its popular Ruger Precision Rifle platform. The RPR is now offered in .338 Lapua Magnum (LM) and .300 Winchester Magnum (WinMag). That’s good news for ELR fans and shooters looking for serious energy transfer at long range. Ruger states: “These new magnum caliber models pair exceptional long-range accuracy potential with tremendous down-range energy, broadening the appeal of an already very popular rifle. These new chambering options broaden the Ruger Precision Rifle’s utility across a wide range of readily-available ammunition.”
New .338 Lapua Magnum RPR Tested by Gun Talk Media
“When the 6.5 and .308 RPRs came out everyone loved them, but they automatically asked ‘Hey, can we have a magnum?’. So we [at Ruger] started working on it right away. We blew the gun up physically larger… to have this in .300 Win Mag and .338 Lapua. The Lapua is fun, I’ll tell you.” Mark Gurney, Ruger Director of Product Management.
RPR Magnums Boast 5R Barrels with Big Brakes
The new RPR magnums feature hammer-forged, chrome-moly heavy-contour 5R barrels fitted with tunable muzzle brakes. Those fat, large-port brakes will certainly reduce recoil and muzzle jump but we wouldn’t like to be shooting beside the .338 LM RPR — expect lots of side-blast. The new RPR magnums feature 18″ free-float anodized handguards with M-LOK accessory attachment slots on all four sides. Integral QD sling attachment points eliminate the need for additional adaptors and a flat-bottom 1.50″ dovetail is compatible with RRS S.O.A.R. and similar QD systems.
The .338 Lapua Magnum RPR features a 1:9.375″ twist rate while the .300 Winchester Magnum model features a 1:9″ twist rate, both of which stabilize long-for-caliber projectiles. These rifles ship with two, 5-round AI-style magazines. As with all RPRs, the bolt is a 3-lug design with 70-degree bolt lift.
Angled +30 MOA Rail and Adjustable Stock Standard
ELR shooters will be pleased that the new, magnum-caliber RPRs ship with a +30 MOA Picatinny rail. That will help give shooters enough elevation to shoot out to 1500 yards and beyond. As with other Ruger Precision Rifle models, the magnums feature a folding stock with adjustable comb height and length of pull. The Ruger Marksman trigger is user-adjustable between 2.25 and 5 pounds.
To view full specifications for the Ruger Precision Rifle in Magnum chamberings, visit Ruger.com. To find accessories for the Ruger Precision Rifle and other Ruger firearms, visit ShopRuger.com
Have you ever wondered how Olympic-class position shooters hold their aim so steady? Those bulky shooting coats help, but there is a lot of bio-mechanics involved also. Top shooters employ their body structure to help support the weight of their rifles, and to steady their aim. This interesting video, produced by GOnra Media, demonstrates rifle hold and body alignment for prone, standing, sitting, and kneeling positions. Olympic Gold Medalist Jamie Corkish (formerly Jamie Gray) demonstrates the proper stance and position of arms and legs for each of the positions. Ideally, in all of the shooting positions, the shooter takes advantage of skeletal support. The shooter should align the bones of his/her arms and legs to provide a solid foundation. A shooter’s legs and arms form vertical planes helping the body remain stable in the shooting position.
Jamie Corkish, London 2012 Gold Medalist in Women’s 3 X 20, has retired from top-level competitive shooting. However, Jamie remains involved in the shooting sports as a Public Relations/Marketing representative for ELEY, a leading maker of rimfire ammunition. Jamie also works with shooting clubs and educational institutions to promote smallbore target shooting.
Images are stills from GOnraMedia video linked above.
On LongRangeHunting.com, you’ll find a good article by Shawn Carlock about wind reading. Shawn is a veteran law enforcement marksman and a past USPSA national precision rifle champion. Shawn offers good advice on how to estimate wind speeds and directions using a multitude of available indicators — not just your wind gauge: “Use anything at your disposal to accurately estimate the wind’s velocity. I keep and use a Kestrel for reading conditions….The Kestrel is very accurate but will only tell you what the conditions are where you are standing. I practice by looking at grass, brush, trees, dust, wind flags, mirage, rain, fog and anything else that will give me info on velocity and then estimate the speed.”
Shawn also explains how terrain features can cause vertical wind effects. A hunter on a hilltop must account for bullet rise if there is a headwind blowing up the slope. Many shooters consider wind in only one plane — the horizontal. In fact wind has vertical components, both up and down. If you have piloted a small aircraft you know how important vertical wind vectors can be. Match shooters will also experience vertical rise when there is a strong tailwind blowing over an up-sloping berm ahead of the target emplacements. Overall, Shawn concludes: “The more time you spend studying the wind and its effect over varying terrain the more successful you will be as a long-range shooter and hunter.”
This Editor, as a life-long sailor, also has some suggestions about wind. Many folks may not realize that wind can cycle, both in direction and in speed (velocity). If you are patient, you should be able to sense the timing of the cycles, which will help you predict shifts in wind direction and velocity. While it is tempting to shoot in the lulls, sometimes the true wind vector (angle + speed) may be most constant when the wind is blowing stronger.
Another tip for hunters is to orient your shot, when possible, in alignment with the wind direction. Try to face into the wind, or have the wind at your back. This is especially effective when shooting in a varmint field. Use a string of tape on a pole to show wind angle. Then shoot directly into the wind or with the wind directly at your back. This will minimize horizontal deflection caused by the wind.
SFC Daniel Horner, now a civilian, is the best multi-gun competitor this Editor has ever met and seen in action. Horner is masterful with pistols, ultra-fast and accurate with rifles, and amazing with shotguns. Horner’s multi-gun aiming and transition speeds defy belief. Even with his world-beating skills, Horner is also respectful and humble. As a leading member of the U.S. Army Marksmanship (USAMU) team, Horner was never a show-boat, he was just (nearly always) the fastest guy on the range. I’ve seen him beat other top-level shooters by 10 seconds or more in a single stage. He’s that good. And now he’s turned PRO, having joined the SIG Sauer Shooting Team.
As a soldier with the USAMU, Horner was a true phenom with rifle, pistol, and shotgun, winning multiple 3-Gun titles against tough competition. When he was on his game, no one on the planet was better in the 3-Gun arena. His record of major multi-gun championships may never be rivaled. He has won over 125 major events/titles at the world, national, regional, and state level and he’s still a young man! Consider Horner’s amazing list of World and National titles:
10-Time USPSA Multi-Gun National Champion
4-Time 3-Gun Nation Pro Series Champion
2014 NRA World Shooting Championship Winner
2-Time IDPA National Champion
2-Time Int’l Sniper Competition Team Winner
IPSC Shotgun National Champion
Horner Highlights on Video
Here are some of our favorite Daniel Horner competition videos. You can see why he won so many major championships, including all the top multi-gun competitions.
Horner Shreds 3-Gun Nation Night-Time Stage
Horner Blazes in Rocky Mountain 3-Gun Shoot (Great Scenery!)
Horner Rips Night-Time Stage at 3-Gun Nation 2016 Pro Finale
How to Hammer Like Horner
In this USAMU Video, SFC Daniel Horner talks about grip, hold, stance, and body position. The proper hold/stance speeds up target transitions and keeps the muzzle on target for faster follow-up shots.
Champion 3-Gun Ace Daniel Horner has joined the SIG Sauer Professional Shooting Team — Team SIG. Horner recently left the service of the U.S. Army where he rose to the rank of Sergeant First Class (SFC). Horner served with the U.S. Army Marksmanship Unit, becoming one of the most successful shooters in team history. Horner also helped coach the USAMU Action Shooting Team.
Horner’s History — Rising to World Champion After Starting at Age Six
“I started shooting at six years old when I would go to the range with my Dad. When I was twelve years old I shot my first IDPA match, at sixteen I won my first IDPA National title, and at eighteen I enlisted in the U.S. Army to join the AMU. For basically my entire life I have been shooting competitively, and for as long as I can remember it’s been a lifelong goal of mine to shoot professionally. To have this opportunity to … join Team SIG is really a dream come true and I can’t wait to start working with the company and competing.”
Horner will compete primarily in multi-gun matches, and long-range rifle competition as a member of Team SIG. Horner’s first competition with Team SIG will be the SIG Sauer Fort Benning Multi-Gun Challenge next month (November 15-18, 2018). Horner will campaign a P320 X-Five full-size pistol, and a SIG M400 SDI Comp rifle with a TANGO6 1-6x24mm second focal plane scope.
Registration has opened for SHOT Show 2019, which runs January 22-25, 2019 at the Sands Expo Center in Las Vegas, Nevada. While not open to the general public, the huge, annual firearms industry trade show attracts over 60,000 industry professionals, buyers, and media members from all 50 states and more than 100 countries.
Registration for the National Shooting Sports Foundation’s 2016 SHOT Show is now open for Exhibitors, Attendees, and members of the Media. Register now at SHOTShow.org/register. While registering, attendees can also enroll in seminars. CLICK HERE for Attendee Registration.
IMPORTANT: Book your hotel very early! Like last year, there will be a number of major events in Las Vegas the same week as SHOT Show 2019. This means that hotel space will be heavily booked in advance. Make reservations NOW. Forewarned is forearmed!
The Shooting, Hunting, Outdoor Trade Show (SHOT Show) is the world’s largest trade show for all professionals involved with the shooting sports, hunting, and law enforcement industries. It is the world’s premier exposition of firearms, stocks, barrels, gun optics, ammunition, outdoor apparel, and all related products and services. The SHOT Show is a very big deal in Vegas — at the 40th Anniversary SHOT Show in 2018, more than 60,000 industry professionals packed the Sands Expo aisles. This year could be even bigger.
What’s SHOT Show like? Here’s last year’s official SHOT Show Teaser Video :
10-Time USPSA Multi-Gun National Champion
