Pair of Premium F-Open Rifles with Kelbly Golden Bear Actions
Report by Shiraz Balolia, CEO Grizzly Industrial
This project was started 2-3 years ago when I decided to build two brand-new rifles based on the Cerus riflestock chassis. I had my own highly-figured woods and sent them to Will at Cerus Rifleworks. Within a few months I received back two very nice-looking stock blanks but unfortunately they were made for a regular recoil pad system. I was going to install the R.A.D. (Recoil Absorption Device) systems and failed to mention that to Will. Further the thumbhole slot for the adjustment knob was through-cut on both sides of the stock and placed in a position where it would interfere with the R.A.D. recoil system installation. Accordingly, some serious modifications were in order.
Modifying the Cerus Stocks and Installing the R.A.D. System
The very first thing I did was plug up the thumbhole slot in each bank and then installed decorative caps in highly-figured contrasting woods. I also wanted the thumb-knob adjustment to be accessible and adjustable using only one finger so I shifted the whole system forward and to the right. I was now able to install the R.A.D. recoil system (see below) without interfering with the cheekpiece adjustment.
Next, I installed the bottom wider track for my rear bag and also carved out the finger grooves in the grip. The blanks were quite long so I cut off approximately two inches from the front end of each stock and also deepened the large tracking cavity under the fore-ends. I went ahead and inlaid my name in Mother-of-Pearl on the Walnut stock.
Gold Kelbly Actions for Two World-Class Tack-Drivers
The two sequentially-numbered Golden Bear F-Class actions (057 and 058) arrived from Kelbly at different times and the stocks were sent to Alex Sitman at Masterclass Stocks for bedding the actions into the stocks. Alex does an outstanding job on pillar bedding and has done most of my rifles for many years.
The stocks were then sent to Sims Guitar Finishing for clear coating with “wet look” finish on the stocks. Chambering of the barrels was done in-house by Dave, our top engineer at Grizzly Industrial. Dave has chambered most of my rifles in recent years. Both he and I have been trained by Gordy Gritters in precision chambering. Finally, the rifles were assembled, scopes installed, and tested out. Both are tack-drivers made for world-class competition.
Shiraz Tests his .300 Shiraz F-Open rifle. As you’d expect shooting heavy 215gr Berger Hybrids, the recoil is significant, but the rifle tracks perfectly with smooth return to battery.
Rifle #1 – Walnut Stocked .300 Shiraz
• Chambered for .300 Shiraz (modified .300 WSM)
• Stock made of highly-figured Walnut with Curly Maple inner laminations
• Kelbly Golden Bear F-Class action
• Bartlein 1:10″-twist barrel, 31″ length
• March 10-60x56mm High Master scope with Barrett rings
• Bald Eagle tuner
• Jewel trigger
Rifle #2 – Curly Maple Stocked .284 Shiraz
• Chambered for .284 Shiraz (modified .284 Winchester)
• Stock made of highly-figured Curly Maple as well as Walnut and Wenge inner laminations
• Accents and inlays as well as the base shoe are made of Curly Koa wood
• Kelbly Golden Bear F-Class action
• BRUX 1:9″-twist barrel, 31″ length
• March 10-60x56mm High Master scope with March rings
• Bald Eagle tuner
• Jewel trigger
Two Improved Cartridges — .300 Shiraz and .284 Shiraz
The two rifles run their own respective “Improved” cartridges. The dark walnut rig runs the .300 Shiraz which is based on the .300 Winchester Short Magnum (WSM). The maple 7mm runs the .284 Shiraz derived from the .284 Winchester. Shiraz developed these two improved cartridge designs to boost the performance of the parent cartridges which are both quite popular among F-Open competitors. The .284 Shiraz has similarities to the popular .284 Shehane wildcat.
.300 Shiraz Load Information: Shiraz loads his .300 Shiraz with Berger 215gr Hybrids, CCI BR2 Primers, and Hodgdon H4350 Powder. This load produces groups under quarter-MOA.
.284 Shiraz Load Information: The .284 Shiraz (shown below) is loaded with Berger 180gr Hybrids, again with CCI BR2 Primers, and H4350 powder. And like Shiraz’s .30-cal rifle, this handsome 7mm rig delivers sub-quarter-MOA grouping capability.
This stock is made from highly-figured Curly Maple with Walnut and Wenge wood inner laminations. Accents and inlays and the base shoe are made of Curly Koa wood.
About Shiraz Balolia
Shiraz Balolia is the founder and CEO of Grizzly Industrial. He is also one of the USA’s leading F-Class shooters. He has been a Team USA member and F-Open Team USA Captain, and in individual competition he won three straight Canadian F-Open Championships (2014, 2015, 2016). That Canadian Three-Peat is definitive proof of Shiraz’s stellar long-range shooting talent.
In the video below, created when Shiraz was F-Open Team USA Captain, Shiraz works with Palma Team Coach Gary Rasmussen. With the target at 800 yards, Shiraz shows how a shooter works with a wind coach. Three cameras are employed to show the target, the shooter, and the spotter’s-eye view.
This video starts with a lesson on target reading, then Shiraz and Gary work together to judge the wind. Watch as Shiraz makes ten straight “10 point” center hits at 800 yeards. A inset frame in the video shows bullet placement after each shot. This video is highly recommended for all long-range competitive shooters and coaches.
Here is Shiraz (top left) with Team Grizzly, the 2018 U.S. F-Open Championship Team. Members are: Shiraz Balolia, Emil Kovan, David Mann, John Myers, Trudie Fay (Coach).
Share the post "Sunday Gunday: Shiraz’s F-Open Dynamic Duo — .30 Cal and 7mm"
Sometimes you’ll get a barrel that doesn’t stabilize bullets the way you’d anticipate, based on the stated (or presumed) twist rate. A barrel might have 1:10″ stamped on the side but it is, in truth, a 1:10.5″ twist or even a 1:9.5″. Cut-rifled barrels, such as Kriegers and Bartleins, normally hold very true to the specified twist rate. With buttoned barrels, due to the nature of the rifling process, there’s a greater chance of a small variation in twist rate. And yes, factory barrels can be slightly out of spec as well.
After buying a new barrel, you should determine the true twist rate BEFORE you start load development. You don’t want to invest in a large supply of expensive bullets only to find that that won’t stabilize because your “8 twist” barrel is really a 1:8.5″. Sinclair International provides a simple procedure for determining the actual twist rate of your barrel.
Sinclair’s Simple Twist Rate Measurement Method
If are unsure of the twist rate of the barrel, you can measure it yourself in a couple of minutes. You need a good cleaning rod with a rotating handle and a jag with a fairly tight fitting patch. Utilize a rod guide if you are accessing the barrel through the breech or a muzzle guide if you are going to come in from the muzzle end. Make sure the rod rotates freely in the handle under load. Start the patch into the barrel for a few inches and then stop. Put a piece of tape at the back of the rod by the handle (like a flag) or mark the rod in some way. Measure how much of the rod is still protruding from the rod guide. You can either measure from the rod guide or muzzle guide back to the flag or to a spot on the handle. Next, continue to push the rod in until the mark or tape flag has made one complete revolution. Re-measure the amount of rod that is left sticking out of the barrel. Use the same reference marks as you did on the first measurement. Next, subtract this measurement from the first measurement. This number is the twist rate. For example, if the rod has 24 inches remaining at the start and 16 inches remain after making one revolution, you have 8 inches of travel, thus a 1:8″-twist barrel.
Determining Barrel Twist Rate Empirically
Twist rate is defined as the distance in inches of barrel that the rifling takes to make one complete revolution. An example would be a 1:10″ twist rate. A 1:10″ barrel has rifling that makes one complete revolution in 10 inches of barrel length. Rifle manufacturers usually publish twist rates for their standard rifle offerings and custom barrels are always ordered by caliber, contour, and twist rate. If you are having a custom barrel chambered you can ask the gunsmith to mark the barrel with the twist rate.
Share the post "Tech Tip: How to Determine a Barrel’s True Twist Rate"
Today, September 25, 2021, is National Hunting and Fishing Day (NHFD). We’re proud to recognize how important hunting is for millions of Americans — as a source of food for families and as an important connection with nature and the outdoors. The NFHD website has helpful resources for hunters, and in this article we provide links for Where to Hunt, How to get Hunting Licenses, and Hunter Education.
This month we hope some of our readers can take new shooters afield and introduce them to hunting. Many hunters receive their first introduction to hunting from family or friends as a tradition passed down from generation to generation. There are over 9.2 million hunters in the United States. Join the millions of dedicated hunters to enjoy a fulfilling experience in the outdoors.
To have a successful hunt you must first get to areas where game thrives. Finding the right places to hunt is essential. The NSSF offers a nationwide Where-to-Hunt database of hunting areas. You can click on a particular state, then specify the specicies you wish to hunt. This is a very useful resource.
In most states, when hunting game animals, you’ll need a hunting license and/or zone permit. The Federal Fish & Wildlife Service has state-by-state listing for hunting licenses on FWS.gov. Click the box below to learn how to get hunting licenses in your region.
For all hunters, whether they have mentors to guide them or not, the most important first step into the woods begins with a state-certified hunter education course. Click the box below to see hunting education opportunities around the nation.
Game Resources — To learn more about different game species, click these NSSF links:
To help you prepare for a fall hunt, here is a free, printable Deer Practice target. Hone your skills on a trio of bucks with a red bullseye centered on the animals. You can print the targets in black and white, but they look best in color. Right-click the image below to download a FREE printable PDF file.
Share the post "Today is National Hunting and Fishing Day"
Today is National Hunting and Fishing Day. To help the avid hunters among our readers, here are Twenty Tips that can help ensure a safe and successful hunt. These tips have been compiled from our AccurateShooter Hunting Forum, with help from Hunting Editor Colton Reid (who has already been out hunting this month). Some items are preparatory — such as working with maps, sighting in the rifle, and improving physical fitness. We also talk about equipment — having the right gear, from proper boots to a GPS for multi-day hunts.
Of course there are entire volumes written on hunting, but these 20 Tips can benefit all hunters. Follow these suggestions and you should have a safer hunting experience with greater likelihood of success. If you liked these pointers, you’ll find two dozen more helpful hints on the NSSF Website.
Preparations Before The Hunt
1. Map Your Hunt and Notify Others — Before your hunt, make a plan and notify friends and family members about WHERE you are going and your intended return date and time. Print out a Google Satellite map and locate landmarks and trailheads. Mark where you plan to park your vehicle and give a copy of this map to friend and/or family members. A hunter may injure himself by falling off a rock, or tumbling in a creek-bed. After that kind of injury the hunter may be confused or unable to walk. If you get stranded in the wilderness, you want trusted persons to know where you are. So, before you leave on a trip, provide a map to a friend or family member. Show them where you will leave your vehicle, and where you expect to be every day of your hunting adventure.
2. Licenses and Permits — Make sure you have a valid hunting licenses and all the necessary tags. Begin this process with ample time before your intended hunt(s). The NSSF adds: “If you are crossing state or national borders, find out about any special considerations you must take care of. Border crossings can mean knowing about firearm transport laws or Chronic Wasting Disease-related regulations.”
3. Work on Your Fitness — On a multi-day hunt you may be trekking many miles. You need to be in good shape. If you are out of shape you may be putting yourself in a precarious situation, particularly if you underestimate the terrain difficulty. As the NSSF says: “Not being able to handle the conditions lessens your chances of success, can turn a great experience into an agonizing one and can endanger your health.”
4. Do Your Homework — Study the area you will be hunting. Talk to other hunters. Look at satellite photos. Get a real sense of the walking and terrain challenges. For a multi-day hunt, MAKE a PLAN. The NSSF states: “Eliminate surprises. Learn as much about where you will be staying, the area you will be hunting, what the weather might be like and what you need to bring[.]”
5. Rifle and Ammo — Make sure your rifle is sighted-in and your ammo is tested. Sight-in your rifle with the ammo you plan to use on your hunt. CLICK HERE for 4-Shot Sight-in Method. After sighting-in from the bench, confirm your zero by shooting from typical hunting positions (kneeling and with forearm supported on a rock or post).
6. Shooting Positions — Practice the shooting positions you will use in the field. Practice sitting, kneeling, and prone positions. You should also practice with shooting sticks, using your day pack as a rest, and with a bipod. Try to have a rock-steady rest before taking your shot.
7. Back-Up Irons — If possible, select a rifle with back-up iron sights. While modern scopes are very durable, they can and do fail (glass can crack). If you’ve invested a lot of time and money in your hunt, back-up iron sights can keep you in the game even if your riflescope fails.
8. Communications and GPS — Bring a GPS if you are in a wilderness area far from civilization. It’s a good idea to bring a cell phone, but you may not have coverage if you’re quite a distance from populated areas. A smart-phone also doubles as a digital camera to record your trophies. For navigation and safety, consider getting Garmin inReach Explorer+. This high-tech handheld unit features interactive SOS, connecting you to the GEOS 24/7 search-and-rescue monitoring center. They also allow you to send and receive text messages, no matter where you are, via advanced inReach satellite technology. Yes you can communicate even if you are miles from the nearest cell tower.
9. Select Good Gear — Make sure you have GOOD BOOTS that are comfortable — you’ll spend a lot of time on your feet. You may want a pack with harness for your rifle so you have both hands free. On a multi-day trip, make sure you can carry enough water, and that you will stay warm enough at night. Good practices for backpacking apply to multi-day hunts.
10. Make a Gear Checklist — Create a complete checklist of the gear and supplies you need. That includes arms, ammunition, rangefinder, binoculars, proper clothing (including spare clothes), hunting accessories, sleeping gear (on multi-day hunts), toiletries, medications. Don’t forget a good first aid kit — lots of bad things can happen during any wilderness trip. You can cut a hand, break an ankle or worse.
During The Hunt
11. Have a Plan — know where you plan to go and when. Try to be where you want in the early morning and early evening hours when deer are likely most active.
12. Take Your Time — If you spot a deer and get too excited and don’t take your time you may spook him. Go slow and glass. If possible, wait for the animals to bed down and relax. Then work out the best way to approach your prey. Remember, “You get so few opportunities, don’t screw it up!”
13. Glass More, Walk Less — Let your eyes do the walking — get good binoculars and use them. With their heightened senses of smell and hearing, deer/elk are able to spot you way better than you can spot them. If you are walking around a lot, chances are you are getting spotted by your prey.
14. Riflescopes Are Not Binoculars — Never use a riflescope as a substitute for binoculars. The temptation to do so is real, but when one does this, one is by definition pointing the muzzle of the gun at unknown targets. We like binoculars with built-in rangefinders. When glassing at long range, try supporting your binoculars on your pack.
15. Be Sure of Your Target before Shooting — Every year during whitetail season, farmers are forced to spray-paint their cattle or risk having them “harvested” by hunters who don’t bother confirming the species in their sights. Hunters with “buck fever” can make mistakes. When in doubt, don’t shoot.
16. Know When to Unload — When finished hunting, unload your firearm before returning to camp. You should also unload your gun before attempting to climb a steep bank or travel across slippery ground.
17. Bring Hearing Protection — While pursuing and stalking your prey you’ll want full sensory use of your ears. But when you’re finally ready to take the shot, slip in hearing protection. A shot from a large-caliber hunting rifle can exceed 170 decibels. Unprotected exposure to noise from a SINGLE 170+ dB shot can cause permanent hearing damage. (Source: ASHA.org). If you make a follow-up shot, you double that noise hazard. Therefore a hunter with a non-suppressed rifle should have hearing protection available.
You can keep a pair of quick-insert plugs on a cord around your neck. Or, get a lightweight neck band with earbuds, such as Howard Leight Quiet Band QB2HYG, 3M Safety Band, or Sellstrom Band, all with a good 25 dB Noise Reduction Rating. You can keep these lightweight bands around your neck, for quick deployment before you shoot.
“Once a hunter is successful, the REAL work begins.” — Colton Reid
18. Harvesting the Animal — When dressing your animal, be careful with the meat. You’ll want very sharp knives. Some hunters prefer knives with replaceable, razor-sharp blades. Don’t rush the task. Make sure you don’t get moisture or dirt on meat. The three spoilers of meat are heat, moisture, and dirt.
19. Pace Yourself When Packing Out — If you DO succeed, and bring down a big buck, will you be able to dress the animal and carry out the meat? Always be prepared to hike out with extra weight. If you are successful, make sure not to waste the meat you worked so hard for. Choose a pack that can help you carry a heavy load. Remember, this is not an insignificant challenge — you may be carrying 60 to 100 extra pounds in addition to your other gear. Again, take your time. Rest as needed. Don’t hurt yourself.
20. Remember to Enjoy the Experience — Our Hunting Editor, Colton Reid, offers this sage advice to all hunters, but particularly to novices: “Have fun, and appreciate your hunt, whether you bag a buck or not. It is a privilege to experience the wilderness and to get away from the city. Enjoy it while you’re out there. And keep your spirits up. You may get tired, but remember that ‘comes with the territory’. At the end of the day, yes you may be exhausted. And you may want to quit and go home. But stay positive, stay focused. Be patient, the experience is worth it.”
CLICK HERE for Hunter Training/Mentoring Programs State-by-State.
Prepare For Your Hunt — Get Fit and Practice Positions
As part of the NRA’s Tips & Tactics video series, Kristy Titus explains how to prepare for a hunt. Titus, co-host of the Team Elk TV show has hunted around the globe. She grew up in the outdoors, running pack mules in Oregon with her father. In this video, Kristy discusses fitness training and demonstrates field positions that can be employed during a hunt.
Kristy explains: “Hunting can lead you into some steep, rough country. It’s really important that you train both your body and your mind to handle the elements and the rigors of hunting So, if you plan on going on a mountain hunt, get out and train your body. Train with your firearm. Get off the bench and have some fun with this. Do some positional shooting or, if you want to add a stress dynamic… have someone put you under a time parameter.”
Visit WhereToHunt.org
There’s a great online resource for hunters that will help you find game locations in your state and ensure you have all the proper permits and game tags. WheretoHunt.org features an interactive map of the country. For all 50 states, the NSSF has compiled information about hunting license and permits, where to hunt, hunter education classes, laws and regulations and more. For each state you’ll also find a link for required applications and license forms.
Click Map to Get State-by-State Hunting INFO
Share the post "Twenty Tips for Hunters to Have a Safe and Successful Hunt"
Do you have an Eliseo Tubegun that you use for sling-shooting competitions, but would like to try your hand at F-Class Open matches? Well here is a low-cost, yet very effective add-on that can transform your TubeGun into a serious F-Open rifle. The bolt-on rails also work great for load development if you want to use a front rest with 3″-wide front bag for greater stability and repeatability.
Competition Machine’s Gary Eliseo is a very smart designer as well as a talented shooter. The inventor/builder of the popular Competition Machine Tubegun chassis systems, Gary offers a bolt-on bag-rider accessory. Gary call this his PickleFork fore-end extension. The Pickleforks are rails that fit to the sides of the tubular fore-end/handguard on his chassis systems. This allows you to use a pedestal-style front rest for F-Class competition.
Pickleforks also provide a much more stable platform for load testing, varmint hunting, or any kind of rest-assisted precision shooting. These PickleForks transform a Tubegun into an ultra-stable, straight-tracking rig when used with a competition-style front rest.
Gary explains: “Now you can have the same super low-boreline, long ‘wheelbase’ and vertical sides of our innovative F1 F-Class chassis system for your tube chassis. The new PickleForks attach directly to the sides of the F-Class/Tactical fore-ends, no modifications are required. They are very rigid with no flex or twist and make the rifle track like it’s on rails.” The new Eliseo Competition Machine PickleForks are offered for a very reasonable $70.00 per pair, with Cerakote finish. (You get two metal units, one for each side of the fore-arm). For more information, visit www.GotXRing.com or call (928) 649-0742.
Product Tip from EdLongrange. We welcome reader submissions.
Share the post "PickleForks — Bolt-On F-Class Bag-Rider Rails for Eliseo Tubeguns"
Tomorrow, September 25, 2021, is National Hunting and Fishing Day. Hunting season is here — and we know many of our readers will soon head to the woods in pursuit of deer, elk, or other game. To make a good shot, it’s wise to rest your rifle when possible. In this video, methods for stabilizing a rifle in the field are demonstrated by Forum member Thomas Haugland, who hails from Norway. Thomas focuses on practical field shooting skills for hunters. Thomas (aka ‘Roe’ on Forum and Sierra645 on YouTube) shows how to verify his zeros from bipod and then he demonstrates improvised field rests from the prone, kneeling, and sitting positions.
Thomas explains: “In this video I focus on basic marksmanship techniques and making ready for this year’s hunt. As a last check before my hunting season, I got to verify everything for one last time. My trajectory is verified again, the practical precision of the rifle is verified. I also practice making do with the best [improvised] rest possible when an opportunity presents itself. After getting knocked in the face by a .338 Lapua Magnum rifle during a previous filming session, I had to go back to basics to stop [flinching]. I include some details from bipod shooting that hopefully some hunters will find useful. Fingers crossed for this years season, good luck!”
How to Stalk Game — Tips from Thomas
If you liked that video, here is another valuable video from Thomas. In this “How to Approach Deer” video, Thomas explains the basics of a successful stalk. If you are headed into deer country this fall, definitely watch this video.
Share the post "Practical Shooting Skills for Hunters — Field Rests"
The fall Hunting Season is here. Do you plan to use factory ammo in your hunting rifles? Perhaps you buy bulk centerfire ammo for your AR15 or varmint rifle. Then this book can definitely benefit you.
If you ever shoot factory ammo, you should consider getting Ammo & Ballistics 6. This resource lists over 2,600 different loads for 200+ cartridge types from .17 Mach 2 up to .700 Nitro Express, including the most popular centerfire and rimfire cartridges (both rifle and handgun). In this updated-for-2020 Sixth Edition, there are over 3,000 tables covering virtually every caliber and every load for all commercially-loaded hunting ammunition sold in the USA. Tables include velocity, energy, wind drift, bullet drop, and ballistic coefficients up to 1,000 yards.
Ammo & Ballistics 6 helps you select ammo for a hunt — quickly compare the velocity and knock-down power of various commercial ammo. This book can also help you choose a caliber/chambering for your next hunting rig.
Verified Book Purchaser Reviews
“Outstanding reference guide for shooters and ballistic enthusiasts alike. Has data on velocity, energy delivered, Taylor KO index, windage and elevation on numerous loadings for hundreds of [cartridge types]. Each cartridge has all dimensions labeled (i.e rim, case length, neck, etc.), and has an informative description of the cartridges history/relevance.” — S. Step, 2017
“Great heaps of data! This volume has pages and pages of new data for .22LR like the hot Velocitor, and also on the .22 WMR from 30 grains up into the 50s. Most importantly there is lots of range data, drop, windage, kinetic energy, etc. — Terrific reference guide….” — E. Svanoe
Ammo & Ballistics 6 contains data and illustrations on virtually every sporting cartridge sold in the USA. This 2020 Edition covers 200-plus cartridge types from .17 Mach 2 up to .700 Nitro Express.
Share the post "Best Guide for Factory Ammo — .17 HM2 to .700 Nitro Express"
It’s hunting season now. Need a scope for your hunting rifle? Or are you looking to upgrade the optic on your benchrest or F-Class rig? Or maybe you are thinking of getting started in the tactical shooting game (PRS/NRL/NRL22) and want a FFP scope with hold-off reticle. Whatever your optics needs, we’ve found a way you can save big buck$. ScopeList.com is running major sales right now for leading optics makers: Swarovkski/Kahles, Schmidt & Bender, Nightforce, Zeiss, Leica, Vortex, Steiner, Trijicon, Leupold, and more. In addition, ScopeList has special clearance inventory at huge discounts.
Click the boxes below for the best ScopeList Deals on major optics brands. A variety of products are on sale including riflescopes, spotting scopes, laser rangefinders, binoculars, Red Dot optics and more.
Share the post "Save Hundreds on Top Tier Optics at Scopelist.com"
SCI Convention Returns to Las Vegas in 2022 Safari Club International celebrates 50 years of defending the freedom to hunt. The International Hunters’ Convention returns to Las Vegas in 2022. The Convention will run January 19-22, 2022 at the Mandalay Hotel complex. This is the world’s largest hunting convention, and should attract thousands of visitors. Convention seminars will cover the full spectrum of hunting, fishing, shooting and outdoor adventure.
The SCI Convention has 320+ exhibitors registered currently. These will include gun-makers, optics companies, gear manufacturers, outfitters, and top hunting resorts. Outdoor industry companies will showcase the latest products — from firearms and accessories to optics, ammunition, archery, gear and equipment. Other offerings include furs, jewelry, furnishings, and outdoor clothing.
SCI auctions offer exclusive firearms, once-in-a-lifetime hunts and adventures, and fine artwork. Proceeds from SCI’s auctions support SCI Foundation’s conservation and education programs.
Established in 1971, SCI will mark its 50th year at the Mandalay Bay Resort in Las Vegas, January 19-22, 2022. Exhibits and daytime activities will be held at the Mandalay Bay Convention Center. The host hotel will be Mandalay Bay, a 43-story luxury resort and casino on the Las Vegas Strip.
This year’s lineup of guest speakers includes top pro-hunting political voices Tucker Carlson and Donald Trump Jr.; other special guests include Craig Morgan, Edward Byers, and Jim Shockey.
“We are pleased to be able to bring the SCI Convention back to Las Vegas in 2022,” said W. Laird Hamberlin, SCI CEO. “We know our exhibitors and members will look forward to being a part of this special event[.] This year we will be celebrating 50 years of SCI defending the freedom to hunt with the convention of a lifetime. From our lineup of special guests to our top-drawer exhibitors from around the world, the 2022 SCI Convention will be one for the record books.”
This video shows highlights from Past SCI Conventions
About Safari Club International
For 50 years, Safari Club International (SCI) has been the leading defender of the freedom to hunt and supporter of wildlife conservation worldwide. SCI is the only hunting rights organization with a Washington, D.C.-based international advocacy team and an all-species focus. SCI mobilizes our 152 chapters and affiliate network representing 7.2 million hunters around the world. SCI’s sister organization, the SCI Foundation, supports research, management, and rural communities in North America, Africa, and Central Asia.
Share the post "Safari Club Int’l Convention — January 2022 in Las Vegas"
In this article we cover a better barrel cooler you can build yourself for under $15. This uses a high-speed inflator fan sold on Amazon, along with a piece of temp-stable tubing. Forum member (and popular YouTube host) F-Class John devised this system. He found it cools his barrels in less than half the time of some other products. And the system can also serve as an Empty Chamber Indicator (ECI).
Barrel coolers perform an important function — reducing barrel operating temperatures. This can definitely help preserve barrel life and help maintain good accuracy in competition. In addition, keeping barrels cool can reduce the chances of excess chamber pressure, an important safety concern.
There are a variety of commercially-available barrel cooling systems. There are external fans, as well as internal, slip-in systems than can do double duty as an Empty Chamber Indicator (ECI). You can get the original yellow $39.99 BarrelCool or the red $59.99 RifleKuhl from Magnetospeeed. Both are good products. But F-Class John came up with a system that works even better — one you can build for a fraction of the cost of those yellow or red fans.
Build Your Own Barrel Cooler for Under $15
This system is easy to put together. Order a $11.99 YIVAR pump from Amazon. This is a small, high-output pump designed to inflate air mattresses. Then get some high-temp-rated tubing from a local supply shop. Then trim the case-head off an old piece of brass. Taper the end of the tube a bit and fit it in the case. NOTE: Use of the fitted case is optional. Having the case provides a nice fit in your chamber. But the system works pretty well just with the tubing and Yivar air pump.
In his .284 Win barrel, the Yivar pump system blows air at 10+ mph out the muzzle. F-Class John says that is “about three times the velocity of other systems”. The Yivar pump “holds about 45 minutes of charge” so he can use it for 15 minutes after each of three strings in a match. And then it can be recharged from a USB-compatible battery pack at the range. John notes the fan continues to blow about the same speed for the full 45-minute charge duration.
Key Benefits of this system
1. Faster Cooling
2. Low Cost (under $15)
3. Longer run time on battery
4. Fan battery is USB rechargeable
5. Finally a use for that worn-out brass
John confirmed the effectiveness of his barrel cooler using a stick-on temperature tape placed on the barrel. This showed that his fan system cooled the barreled in less than HALF the time as the plastic commercial fan systems. In addition, his run time was excellent, and the Yivar’s built-in Lithium-Ion battery is fully rechargeable so he never has to buy expensive batteries.
What are the downsides? Not many. The fan IS somewhat noisy — watch video at 4:04-4:28 time mark to hear the fan. F-Class John notes, however, that the Yivar fan is about 4 decibels (dB) quieter than a Magnetospeed RifleKuhl, so the Yivar’s noise is not that bad.
Here are comments from YouTube viewers who like F-Class John’s invention:
Finally something affordable! It’s compact and can be recharged at the range. I have room for this but not all the other gadgets you show. And a poor pensioner like my self can afford it! Thanks for the tip.
Ingenious and awesome idea! I bought one as soon as I saw this. I’ve been thinking about getting a cooler when I’m testing my loads. Thanks!
Brilliant… Brilliant… Brilliant! I have been deferring buying a barrel cooler for years now on account of wanting to spend my toy fund budget on other things. Considering how cheap it is to build, there is no excuse to not make one now.
Fan with Plain Hose Also Works Well (No Brass Case Cutting/Fitting Required)
F-Class John likes the custom fit he achieves with the hose inserted into a piece of modified brass. However he notes that the system also works well with no brass at all — i.e. just hose and fan. If you have a small diameter chamber, this may actually work better. Simply put the hose on the fan, trim/taper the forward hose end to fit and you are good to go.
F-Class John explains: “The heavy duty tubing and the motor works just fine without a brass case. The hose can sit in the chamber by itself. Obviously not every brass case will easily allow for you to put it on the end of the tube. For many people simply using the tube (without brass) may be the simpler option.”
Share the post "Build a Better Barrel Cooler for under $15 — DIY Project"
This Saturday, September 25, 2021, is National Hunting and Fishing Day.
There are over 9.2 million hunters in the United States. The fees paid by hunters are essential to support conservation efforts and to protect/maintain habitats.
These infographics explain the vital role that American hunters play in protecting wild species in North America. Currently 60% of state Fish & Wildlife Agency funding comes from excise taxes and licensee fees paid by hunters and anglers. The system has provided billions of dollars for conservation over the past nine decades. Since the late 1930s, hunters, target shooters and the firearms industry have been the nation’s largest contributors to conservation, paying for programs that benefit America’s wildlife.
The Pittman-Robertson Act generates $700 million annually, which is distributed by the U.S. Fish and Wildlife Service to state fish and game agencies across America.
Share the post "How American Hunters Promote Wildlife Conservation"
A legend in the shooting community has passed. And we are all diminished. Walt Berger passed away on September 19, 2021. A great innovator, a great benchrest competitor (with many Hall of Fame points), and a great friend to countless shooters, Walt will be truly missed.
Berger Bullets announced yesterday: “It is with our deepest regrets that we announce the passing of Berger Bullets & Ammunition founder, Walter Berger. Walt passed peacefully on Sunday afternoon September 19th, 2021, surrounded by friends and family at the age of 92.
‘If a job’s worth doing, it’s worth doing right’, were words that Walt lived by. One could see it in how he treated friends and family, and in his impact on the shooting world. Walt’s legacy and dedication to quality is carried on by his grandson, David Hamilton, the Plant Manager of the Berger manufacturing facility in Mesa, Arizona. Walt’s philosophies and business practices are the guiding principles in our mission to ensure that products bearing the Berger name continue to be something Walt would be proud of. We celebrate his life and will do our best to live up to his example.”
Walt was a remarkable man who loved the sport of benchrest shooting. He was still competing at age 90+. Here he is in 2016 at the Cactus Classic in Arizona.
Many of our readers and Forum members knew Walt and shot with him at matches over the decades. Here are some of the expressions of sadness at his passing:
“Great man, he had a long run, and touched many lives.” — Boyd Allen
“A real gentleman and always there to help anyone that needed it. I’m blessed to have known him many years. RIP old Friend.” — Bill Shehane
“Now there is a man for ya! I remember talking to him and Eunice on the phone back in the 80s ordering some of their benchrest bullets. May God bless his family. Thank you Walt for the great bullets — I’ve watched them do some amazing things!” — Don Mild
“Walt was an iconic figure in accurate shooting for many many years. A gentleman in the game who traveled worldwide including Australia. He will be sorely missed. Our thoughts and prayers are with his friends and family. Rest assured men like Walt aren’t made any more. Thanks for everything Walt — your Australian friends will never forget you.” — Brad Ward
“When I first started chasing accuracy I used to buy bullets from Walt at his little shop on Camelback Road in Phoenix. He always had time to share his expertise and to help me. He and Eunice are together again, shooting at the big range in the sky where the weather is perfect with no wind.” — Doug Whitson
“My prayers go to David, Stacey, Eric, and the girls.
Walt was a truly special man and friend.” — Nancy Tompkins
“He was a Man of Legend. And Legends live forever.” — Ivan Lukashevych
About Walt Berger and Berger Bullets
Walt Berger shot competitive benchrest most of his adult life. Seeing that the bullets he could buy off-the-shelf were not up to his quality expectations, Walt decided that he could make better precision bullets than he could purchase. Walt started making his own bullets and proved their quality by winning competitions and eventually even earning his place in the Benchrest Shooters Hall of Fame. Other benchrest shooters saw his success and solicited him to make their bullets as well.
After years of crafting bullets by hand in his garage, Walt’s wife, Eunice, who was also a legend in benchrest competition, encouraged him to expand his hobby into a business. Together, they grew Berger into a large-scale precision bullet operation with exceptionally high quality standards.
Share the post "In Memoriam — Walt Berger, Founder of Berger Bullets"
Sometimes you’ll get a barrel that doesn’t stabilize bullets the way you’d anticipate, based on the stated (or presumed) twist rate. A barrel might have 1:10″ stamped on the side but it is, in truth, a 1:10.5″ twist or even a 1:9.5″. Cut-rifled barrels, such as Kriegers and Bartleins, normally hold very true to the specified twist rate. With buttoned barrels, due to the nature of the rifling process, there’s a greater chance of a small variation in twist rate. And yes, factory barrels can be slightly out of spec as well.
Tomorrow, September 25, 2021, is National Hunting and Fishing Day. Hunting season is here — and we know many of our readers will soon head to the woods in pursuit of deer, elk, or other game. To make a good shot, it’s wise to rest your rifle when possible. In this video, methods for stabilizing a rifle in the field are demonstrated by Forum member Thomas Haugland, who hails from Norway. Thomas focuses on practical field shooting skills for hunters. Thomas (aka ‘Roe’ on Forum and 
Key Benefits of this system
A legend in the shooting community has passed. And we are all diminished. Walt Berger passed away on September 19, 2021. A great innovator, a great benchrest competitor (with many Hall of Fame points), and a great friend to countless shooters, Walt will be truly missed.
