Bang Clang! The 2021 Steel Challenge World Speed Shooting Championship will be featured on Shooting USA TV tomorrow. The Shooting USA Steel Challenge episode runs September 22, 2021 on the Outdoor Channel. Show times are: Wednesdays, 9:00 PM Eastern and Pacific, 8:00 PM Central.
This past April, the fastest speed shooters in the nation showcased their skills at the Steel Challenge Championship at Alabama’s Talladega Marksmanship Complex in Alabama. The Steel Challenge course consists of multiple 5-target close-range stages. This discipline has been called “drag racing with guns”. Draw and shoot 5 steel targets with time as your score. The shooter with the lowest overall time wins.
There are multiple pistol and revolver classes, both rimfire and centerfire, iron sights and optics. Increasing in popularity (and speed) are the rimfire rifle and pistol-caliber centerfire rifle classes. There are 13 gun classes in total, the most for any shooting championship. In the centerfire handgun match, the fastest times are posted by competitors using enhanced open guns with compensators and red-dot optics. This year, KC Eusebio has set out to become the only eight-time World Speed Shooting Champion.
Here is a full length Shooting USA Steel Challenge Episode from 2017:
Shooting USA Video covers Course of Fire, Firearms Classes, and Target Layouts (1:20)
Definitely watch the 4-minute video (above) produced by Shooting USA. It explains the classes, shows the stages, and illustrates ALL the different gun classes, pistol AND rifle. You can also see some of the world’s fastest shooters including Jessie Harrison (1:47, 3:44) and Max Michel (3:48). Be amazed by the speed of semi-auto rimfire rifles — five targets hit in under two seconds!
Here is Jessie Harrison, the fastest lady pistol shooter on the planet. At the 2021 World Speed Shooting Championship, Jessie won the Ladies Overall Open title for the 13th time with a total time of 93.03 seconds. Full Report on SSUSA.org.
The Steel Challenge was founded in 1981 by Mike Dalton and Mike Fichman, in Southern California. The two Mikes wanted an exciting alternative to paper targets and came up with the all-steel format. The Steel Challenge World Speed Shooting Championships have grown to one of the largest professional pistol competitions in America. In 2021, scores of competitors competed at the Talladega Marksmanship Park for glory and cash prizes. The Steel Challenge is governed by the Steel Challenge Shooting Association (SCSA) that consists of eight standardized stages with three types of steel targets: small circle, big circle, and square. Here is a steel challenge layout in Germany.
Share the post "2021 Steel Challenge on Shooting USA This Week"
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. EuroOptic — Mauser M18 6.5 PRC, $429.99
⏺ European quality hunting rifle, save $269 with this deal
If you are looking for a refined, well-designed hunting rifle, this Mauser M18 fills the bill. And right now this Mauser M18 in 6.5 PRC is just $429.99 at EuroOptic.com. That’s a huge $269.01 savings off the regular $699.00 price. This M18 rifle features a modern 3-lug bolt with 60-degree bolt lift. Reviews have been excellent! Action and barrel are black nitride coated for durability. The 6.5 PRC is a modern potent hunting cartridge that can drive 140gr bullets at 2950 FPS. Mauser short- and long-action M18s with other chamberings are offered by EuroOptic for $499.99 to $699.99 with choice of black or Savannah brown stock. Other chamberings include .223 Rem, .243 Win, 6.5 Creedmoor, .270 Win, 7mm Rem Mag, .308 Win, .30-06 Sprg, and 300 Win Mag.
2. Locked & Loaded — Stevens Shotguns 12ga or 20ga under $190
⏺ Shockingly low prices on reliable home defense pump shotguns
⏺ Devices offer GPS and Satellite Communication — Backcountry Safety Item
If you’re headed far into the backcountry on a hunt, you definitely need a GPS with In-Reach communication capability. This will ensure you can contact help in the event of emergency, and transmit your exact location. Many hunters use the regular size Garmin inReach Explorer+, priced at $449.99 at Sportsman’s Warehouse. We like and use the Garmin inReach Mini because it is so light (3.5 oz) and compact (4″x2″), and can clip to your shoulder straps. The Mini can send maps to your cellphone. Grab it now for $349.99 from either Sportsman’s Warehouse (black or orange) or Amazon (black only).
4. EuroOptic — Vortex Viper & Razor Close-Outs, Save Hundreds
Here is an awesome deal on the popular Vortex Viper scopes, a top choice for hunters and tactical shooters. EuroOptic has slashed prices on last year’s model Vipers so you can save hundreds. Varminters will love the Vortex Viper PST 6-24×50 MOA EBR-2C for $479.99, a whopping $470 off the original MSRP. Or get the First Focal Plane (F1) 4-16x50mm Viper PST for $449.99 — $450 off the original price. Or, grab the higher-magnification F1 6-24x50mm Viper PST for $599.99, a $350 savings. Click Here for all Vortex Close-Out Scopesthe Vortex warranty is second to none.
⏺ Fast, programmable, accurate dispenser at great price
The Frankford Arsenal Intellidropper is a high-quality powder scale dispenser. It’s accurate to +/- one-tenth of a grain, dispenses in seconds, and can be controlled by a handy mobile App that can store various charges weights for different cartridges. This unit has a 7000-grain capacity with both Auto and manual trickle capability. IMPORTANT: Act quickly to secure the Intellidropper for $199.95 on Sale. NOTE: You must add item to cart to see $199.95 price.
⏺ Benchsource machine works great — cycles brass through twin-torch flame
The state-of-the-art, computer-controlled AMP Annealing Machine is our first choice for precision annealing. But for folks on a budget, the Benchsource Gas Annealer machine is excellent for the $561.99 price (with $9.95 flat-rate shipping). Many national and world records have been set with brass annealed on a Benchsource. A built-in, user-controllable timer sets the annealing time, and the system rotates the brass during the annealing process. You can process about 500-600 cases per hour. The Benchsource Annealer includes machined brackets with twin, high-quality torch heads. Purchase gas containers separately.
7. Midsouth — Tipton Basic Gun Vise, $39.99
⏺ Durable, easy to move around, versatile — at great price
The original Tipton Gun Vise is ON SALE for just $39.99 at Midsouth. Great Deal — this sells for up to $59.99 elsewhere. This is a tough, versatile product you’ll use for years. This Editor has used one of these for more 16 years (with all sorts of rifles) and it is still going strong. This vise has handled everything from an 18″-barreled lever gun to a 32″-barreled F-Class rifle. The unit works well for many tasks: cleaning barrels, stock refinishing/bedding, scope mounting, trigger adjusting, bore-scoping barrels, and checking throat length with a Hornady OAL tool.
8. Brownells — KRG Bravo Chassis Rem 700, $329.99 with Code
⏺ Versatile internal frame stock for PRS or hunting — tan, black, or green
The Kinetic Research Group (KRG) Rem 700 Bravo Chassis is a good dual-purpose choice for PRS and hunting. This chassis features an internal aluminum frame with polymer exterior in Flat Dark Earth, Sako Green, or Black. The stock fits Rem 700 and Rem clone actions, accepts AICS-pattern mags, and is M-LOK compatible. The 2.9-lb KRG Bravo chassis features adjustable cheek riser and length-of-pull, built-in thumb shelf, plus quick-detach sling-swivel and bipod mounts. The KRG Bravo stock costs $349.99 at Brownells in Black or FDE (shown above). Get $20 Off with Brownells code SRG, lowering the net cost to $329.99.
⏺ Good inexpensive system for varminters or sight-in duties
Need a good basic front rest and rear bag to sight-in that hunting rifle? Here’s a solid, functional benchrest set-up at a great price. This Caldwell Rock BR Rest and Bag Combo is great combo deal for just $109.99. This will more than suffice for testing a hunting rifle or basic bench-work. Upgrade the rear bag later. The front rest adjusts for both windage and elevation. This is a very good deal — consider that the Rock BR Rest by itself sells for $163.13 on Amazon.
10. Amazon — 12″ x 12″ Splatter Grid Targets, 10 for $10.99
⏺ Great for hunting rifle Sight-In and easy to estimate group size
This 12″x12″ Splatterburst Target combines splatter shot marking with a grid background, with five aiming points. The bright neon shot circles make it easy to see your shots. And the handy grid lets you quickly estimate your group size. Get a 10-pack for $10.99, or a 25-pack for $18.99 (better deal). This particular target has earned rave reviews — 87% of verified buyers gave this a FIVE-Star rating. One example: “Excellent quality and durability. The adhesive is really strong and the splatter contrast is [great].”
Share the post "Bargain Finder 313: AccurateShooter’s Deals of the Week"
September 25, 2021 is National Hunting and Fishing Day. Working on your wind reading skills can improve your odds of a successful hunt. Image from NHFDay.org.
Thomas Haugland, a Shooters’ Forum member from Norway, is a long-range target shooter and hunter. He has created an interesting video showing how to gauge wind velocities by watching trees, grass, and other natural vegetation. The video commentary is in English, but the units of wind speed (and distance) are metric. Haugland explains: “This is not a full tutorial, but rather a short heads-up to make you draw the lines between the dots yourself”. Here are some conversions that will help when watching the video:
.5 m/s = 1.1 mph | 1 m/s = 2.2 mph | 2 m/s = 4.5 mph
3 m/s = 6.7 mph | 4 m/s = 8.9 mph | 5 m/s =11.2 mph
How to Gauge Wind Speed and Hold Off Using Reticles
This field video shows how to observe natural indicators — trees and vegetation — to estimate wind velocity. Then it shows how to calculate hold-offs using the reticle hash-marks. Thomas shoots a fast-cycling Blaser R93 rifle with Norma 6XC ammunition.
.22 LR Rimfire Rifles and Air Rifles Shooting Side by Side — Same Match, Same Targets.
Air Rifles and .22 LR Rimfires Compete Together
There’s a new game in town — an innovative 50-yard benchrest discipline where .22 LR shooters and Air Rifle aces compete shoulder to shoulder. This new Rimfire + Airgun sport was created by the National 50 Benchrest League (aka “N50″) which now has 16 registered clubs in ten U.S. States.
The N50 League held its first-ever National Championship at the NRA Whittington Center in Raton, NM earlier this month. This new organization has air rifles and rimfire rifles competing together. Notably, at the first-ever N50 Nationals, a purpose-built .22-caliber slug air rifle won against unlimited benchrest .22 LR rifles. We believe that may well be the first-ever airgun victory in a 50-yard benchrest match over serious rimfire competition.
Top Guns at Inaugural N50 Match
Lou Fontana took the overall victory in the match with a 2961 score. Lou shot both air rifles and rimfire rifles in the match, proving he’s a master of both types of guns. Ardey Vad finished second with 2957, while gun-builder Mike Niksch (Thomas Rifles) took third with 2952. Mike’s radical, advanced Thomas air rifle with electronic trigger is featured below. CLICK HERE for full N50 Nationals Results.
Lou, who hails from California, enjoyed the match, noting: “I have a good mentor and a better air rifle than me — my Thomas #33″. Lou added: “Thank you all that attended and special thanks for those that helped in any way to make this inaugural event a good time. We had nice weather, good temperatures, tricky wind, and a little rain. States represented were Washington, Colorado, Nevada, Oklahoma, New Mexico, Arizona, and California.” Lou also praised Joseph Friedrich, one of the founding fathers of N50. Joe tirelessly scored the targets, with help from Mike Niksch’s wife Matti.
Commentary by Joe Friedrich, Open Grove Benchrest
The new National 50 Benchrest League (N50) is a unique shooting experience. We shoot air rifles with pellets and slugs alongside .22 LR Rimfire shooters. We currently have sanctioned clubs throughout the USA offering competition and good fellowship.
N50 has three Classes: Pellet, Sportsman, and PRO. The first Pellet Class is strictly for pellet airguns ranging in calibers from .177-.30 using Diabolo-style pellets from various manufacturers.
The second class is the Sportsman Slug/Rimfire. This combined class allows any factory air rifle shooting commercially-made slugs in calibers from .177-.30 to compete against any factory rimfire that utilizes a factory-barreled action with no attachments to barrel. Pellet air rifles may also compete in this class.
The third class is the PRO Class, and no you do not have to have some magic card that says “Professional” to compete. This class allows purpose-built air rifles, and what we call “unlimited” rimfire rifles to compete. Three types of loads are allowed in PRO Class: .177 slug air-driven, .22 slug air-driven, and any .22 LR ammunition.
Another point — in N50, competitors are allowed to move up in class — you aren’t restricted to a “lower” division. For example, Pellet Class shooters can also move up to shoot in Sportsman and Pro. In addition, Factory rimfires are allowed in Pro Class. This way shooters with the less-expensive rifles can shoot more relays and also see how they compete with the unlimited rigs. It’s all about having fun.
We wanted to make N50 as simple as we could combining air rifles with rimfire so folks who have a factory rimfire can participate and have fun. We also did not want a lot of classes, so combining the two gun types would be simpler. To be honest we were worried that the rimfires will outpace the air rifles, but that was not the case at this year’s Nationals.
National 50 Benchrest League Rules and Course of Fire
The official N50 website, National50.org, lists N50 rules, classes, courses of fire, and membership requirements. There are currently 16 affiliated clubs nationwide, with more coming soon.
General Rules — Here are some of the more notable N50 General Rules that apply to N50 matches:
Target Distance: 50 yards
Match Times: 20 minutes per target
Targets: Official targets produced and distributed by N50
Aggregate Score: Cumulative score of 3 targets shot in sequence on same day
Scoring: No competitor shall score their own target
As far as hardware, N50 is pretty open. For all 3 classes, any scope is allowed and any trigger is allowed. For all 3 classes, stocks are unrestricted, stocks may be bedded, and rifle weight is unlimited. However, the Sportsman Class must retain factory barrel and action. N50 competitors in all classes may use 1-piece rests, 2-piece rests, bags, or bipods — whatever they prefer.
Mike Niksch, owner of Thomas Rifles, won the PRO class with a very strong performance. What is remarkable, and perhaps even historic, is that Mike won with an air rifle, defeating all the high-end unlimited-type .22 LR rimfire rifles in the process. This may be the first time an air rifle out-performed high-end rimfire rigs in head-to-head competition, shooting the same targets in the same match. Overall Match Winner and PRO Class runner-up Lou Fontana observed: “The real significance of this weekend is that Mike Niksch and his brand new Thomas Slug air rifle outshot several unlimited .22 LRs in PRO class. This should be a paradigm shift for most. That may have never been done in competition before. I’ll add it was done at the NRA Whittington Center monitored by a NRA Range Officer.”
Look carefully at that photo. You’ll note Mike’s right hand is on a black box, NOT a conventional trigger. The wood-stocked air rifle Mike shot at Raton is equipped with a state-of-the-art electronic trigger of Mike’s own design. To fire a shot, Mike simply pushes a button that sends an electric impulse via a wire. This trips a mechanism inside the rifle’s action which releases the pressurized air. The system works very well and actually makes the Thomas air rifles simpler to build. The big advantage is that no movement is imparted to the rifle.
Thomas Air Rifle with Metal Stock
While Mike Niksch shot a wood-stocked rig at Raton, Mike also crafts a version of his rifle with an alloy stock and conventional trigger. We shot a video of Mike with this gun at the Open Grove Range in California (see above). Mike builds air rifles with the buyers’ choice of stock. He likes both the wood and the metal versions, and both shoot great — check out that 10-shot group Mike drilled at Open Grove.
A brilliant innovator, Mike has created a rifle design that sets new standards for airgun accuracy. At right is a 10-shot group Mike shot at 50 yards at the Open Grove range with the rifle in the video. Few centerfire rifles could match that accuracy. We asked Mike to demonstrate his rifle’s accuracy, and he sure delivered!
Custom .22-Caliber Slugs
Like many top N50 airgun competitors, Mike forms his own slugs, starting with strings of lead. The lead is cut in short sections then formed up in special bullet-making dies.
The finished .22-caliber slugs look very similar to rebated boat-tail centerfire match bullets. And boy do they shoot!
Mike has tried a wide variety of commercially-available slug designs in his sophisticated air rifles. But nothing has shot as well as the slugs he forms himself. One reason could be that Mike uses custom .22 LR barrels originally designed for .22 LR rimfire rigs. It may be that commercially-made slugs have not yet been optimized for these smallbore barrels. Whatever the reason, Mike’s home-made slugs shoot better than anything he can buy. He has shown us some 100-yard groups that would make centerfire shooters envious.
Share the post "SunDay Gunday: N50 Nationals and the Modern Precision Airgun"
Ace tactical shooter and gunsmith Jim See of Elite Accuracy LLC recently tested a Frankford Arsenal rotary brass tumbler. Like the older Thumbler’s Tumblers, this can tumble your cases in a liquid solution. The wet-tumbling process worked very well Jim reports. Posting on Facebook, Jim noted: “I was super impressed with the Frankford Arsenal rotary tumbler and cleaning packs they sent me. I ran 350 pieces of brass for one hour. They now look great.” Jim appreciated not having to deal with dry tumbling media, such as crushed walnut shells. Dry media produces dust and can leave residues or clog flash-holes.
Interestingly, Jim recommends you try wet-tumbling WITHOUT using stainless media. At least give it a try. Tumbling without media simplifies the process and you don’t have to worry about pins stuck in flash-holes or case-necks*. Jim reports: “Stainless steel pins come with the Frankford kit, but mine hit the trash right out of the box. There is no need to clean the inside of your cases 100% and that’s all the pins add to the equation. The brass bumping brass with hot water and Frankford’s liquid cleaner works great all by itself.” One wag stated: “That’s great to hear. Stainless steel pins are a PITA.”
Other Facebook posters concurred with Jim’s evaluation of the Frankford Arsenal Rotary Tumbler:
“I’ve had one for a couple years, and it works well. I usually run about 250-300 Dasher cases at once in it. But I use the pins because I’m OCD about clean brass.” — David W.
“I’ve had one for a year and a half and it definitely works with or without pins.” — Luke C.
“I got one about six months ago and have yet to use any SS media. I just use some dawn, distilled water, and Lemi Shine®. Turns nasty 5.56 range brass bright and shiny.” — Brian D.
“I don’t use the pins either and use a combination of Dawn soap and Lemi Shine.” — Jon N.G.
This video shows how to assemble and operate the Frankford rotary tumbler. But note, Jim See does NOT feel that it is necessary to use stainless media.
How to Dry Your Brass — Hair Dryer Vs. Machine
The downside of wet tumbling is that you end up with a pile of wet brass at the end of the cleaning cycle. There are many ways to dry brass, from drying in the sun to using a kitchen oven (be careful not to “overcook” your brass). One Facebook poster asked Jim: “What is your drying method for wet brass, and how long does it take?”
Jim See replied: “To start I just drain off the dirty water, and rinse the brass with clean hot water. Then I roll the brass on a towel for 30 seconds and put the brass in a one-gallon bucket. Next I insert a hair dryer in the bucket (with the brass) and let it run for about 5 minutes. With this procedure, the drying process for me is done in less than 10 minutes.”
Jack Lanhart has another method: “I use a food dehydrator. It takes 30 to 45 minutes.”
For those who don’t want to mess with towels and hair dryers, Frankford Arsenal offers a matching Platinum Series Case Dryer that simplifies the process of drying brass. Lyman also makes an excellent Cyclone Case Dryer. These drying machines each cost about $65.00 and both have multiple levels so you can separate different types of cartridge brass. Lyman states that “The forced heated air circulation of the Cyclone will dry your brass inside and out within an hour or two, with no unsightly water spots.” The Lyman dryer can also be used for ultrasonically-cleaned gun parts.
*The Frankford Rotary tumbler does include media separators if you choose to use the provided pins or other media. CLICK HERE for diagram showing how to use media separators.
Share the post "How to Efficiently Wet-Tumble Cartridge Brass"
Hunting Season has already started in some states, and is right around the corner in other locations. For readers who plan to hunt game this fall, we recommend you brush up on hunter safety and learn the laws in your jurisdiction. Here are some helpful resources for hunters: Safety Tips, Hunter Education, License Requirements, and Where-to-Hunt interactive map. Top photo courtesy Horn Fork Guides, Ltd., in Colorado.
Hunter Safety Tips NRAFamily.org has a good article listing seven salient safety tips for hunters. Anyone preparing for a fall hunt should read this article before heading into the field. Here are three key bits of advice:
1. Be Positive of Your Target before Shooting
This might sound overly simplistic, but the fact remains that, every year during whitetail season, farmers everywhere are forced to spray-paint their cattle or risk having them “harvested” by hunters who don’t bother confirming the species of the large ungulate in their sights. Why does this happen? The most likely explanation is “buck fever,” meaning that the hunter wants so badly to see a nice big buck that sometimes his eyes deceive him into thinking that there’s one there. When in doubt, don’t shoot.
2. Scopes Are Not Binoculars
Never use a riflescope as a substitute for binoculars. The temptation to do so is real, but when one does this, one is by definition pointing the muzzle of the gun at unknown targets.
3. Know When to Unload
When finished hunting, unload your firearm before returning to camp. You should also unload your gun before attempting to climb a steep bank or travel across slippery ground.
Visit WhereToHunt.org
There’s a great online resource for hunters that will help you find game locations in your state and ensure you have all the proper permits and game tags. WheretoHunt.org features an interactive map of the country. For all 50 states, the NSSF has compiled information about hunting license and permits, where to hunt, hunter education classes, laws and regulations and more. For each state you’ll also find a link for required applications and license forms.
Click Map to Get State-by-State Hunting INFO
Hunting Affiliation Groups
There are many good organizations dedicated to promoting hunting and preserving our hunting habitats. These groups all offer valuable information for hunters:
Do you enjoy shooting pistols for sport, or perhaps you carry a handgun for self-defense? If you’re like most of us, you might benefit from a “refresher course” on the fundamentals of handgun shooting. The NRA has created a useful Infographic that covers important basics of handgun marksmanship — key things such as Sight Alignment and Trigger Control. Here are the first four (4) lessons. Click the link below to see all SIX (6) training topics: Sight Alignment, Sight Focus, Trigger Control, Breath Control, Hold Control, and Follow-Through.
Are you getting ready for that Fall 2021 hunt? Would you like a FREE Special Hunting Edition of On Target Magazine? Just CLICK HERE to read the latest 85-page magazine in digital PDF format. This issue features New-for-2021 Hunting Gear, plus a round-up of new Suppressor-Ready LR Hunting Rifles:
Mossberg Patriot Long Range Hunter
Springfield 2020 Waypoint
Savage Impulse Predator
Sig Sauer Cross
In addition, two other interesting new hunting rifles are reviewed: Brenton 450 Bushmaster Stalker Carbon Hunter 18, and Rossi R92 Lever Rifle.
Here’s a clever little device from Creedmoor Sports. This $14.95 PUCK lets you run multiple cleaning/uniforming attachments with one easy to use center disk. Store the attachments on the outer diameter and transfer to the threaded center section as desired. This is a clever invention that could work great in your range kit.
Attached Tools Are NOT Included
But before we go any further, TAKE NOTE — the $14.95 only gets you the threaded central Puck disk. ALL the other attachments are sold separately — you have to pay MORE Money — got that? Most people already have inside/outside chamferers and primer pocket uniformers, so the Puck should work well. It fits all 8-32 threaded tools, which includes 95% of most case prep tools.
The Puck — Universal Brass Case Prep Tool Holder
Product Description from Creedmoor Sports
Attach up to four case prep tools threaded 8-32 (95% of case prep tools on the market). The Puck encourages a light touch and is more ergonomic to use than most hand tools on the market today.
Quickly rotate the tool to progressively work through your case prep. Set it up with an outside deburrer, inside deburrer, primer pocket cleaner, and crimp cutter. You can easily rotate through the tools.
A handy tool for the range bag, pair the Creedmoor Puck with any brush or pull cord with an 8-32 thread. Use for detailed brushing or use the Puck as a puller. Thread on picks for scraping off carbon or getting dirt out of tight spaces.
The Creedmoor Puck is made from 416 Stainless Steel. This is both corrosion resistant and magnetic. Use a magnet to stick a Puck the side of your reloading press to easily store your prep tools and keep them at your fingertips for quick touch-ups while loading. The diamond knurling makes this tool easy to grip while in use. The patent-pending Puck tool is designed for heavy use and should last a lifetime.
Share the post "Versatile New PUCK Multi-Tool Holder from Creedmoor Sports"
When shooting groups at long range on paper it can be difficult to distinguish which bullet holes belong to a particular sequence of shots. If, for example, you shot three 5-shot groups at 600+ yards on a paper target, you would have 15 bullet holes on the target (assuming no misses). But at that distance it would be difficult to see the holes on target (even with a spotting scope). Accordingly, when you inspected the target up close, it would be hard to tell which shots belonged to which group. You might have a vague idea, but couldn’t be sure, without a target camera recording the shot sequence.
Here is a method to separate multiple shots into specific groups so you can better evaluate your load and shooting skills. The trick is pretty simple — mark your bullets with a color from a Sharpie or other felt marking pen. If you are shooting three 5-shot groups, mark five with red, five with green, and five with blue (or purple). Then, when you inspect the target, you can identify the group placements by the colors that appear on the paper.
Round Robin: Using colors you can shoot “Round-Robin” to evaluate seating depths, neck tension, or other variables without having the shot order (and barrel heating) affect group sizes unequally. For example you might have three different neck tensions, each marked with a different color on the bullets. Then shoot Red, Blue, Green in that sequence for five total shots per color.
Smart Tip to Show Colors More Vividly
If the bullet inks are not showing up on your target paper clearly, here is a simple trick that can make the colors “bleed” to be more visible. In your range kit, bring some alcohol solution along with some Q-tips. Then dab the shots on the paper target lightly with wet Q-Tips. Here is the front of a target before and after application of alcohol:
Forum Member NewbieShooter explains: “Dabbing a bit of alcohol on the bullet holes with Q-Tips makes the color pop a bit… especially on the back side.” See below:
In short order you will see the colors spread into the paper, clearly marking the shot holes by distinguishing colors. If you were shooting a dark bullseye, view the the BACK side of the target to see the colors on a light background.
Credits: Bullet Tips photo by Forum Member Dave Way; Target photos by Forum Member NewbieShooter; Story tip from Boyd Allen.
Share the post "Color Your Bullet Tips to Define Shot Groups at Long Range"
The NSSF has a new Share Center webpage, with key information and graphics that gun owners can easily share through social media. Second Amendment advocates now have access to a growing library of shareable facts with infographics. These can be shared directly to Facebook, Instagram, and Twitter as well as blogs, forums, and websites. In addition, the graphics can easily be attached to emails.
Topics include hunting, gun safety, modern sporting rifles, background checks, conservation and more. The NSSF plans to regularly add more shareable materials to the NSSF Share Center.
The NSSF states: “The firearm industry needs your help to correct misinformation and misconceptions about the firearm industry and gun owners to ensure that our freedoms remain protected. The new NSSF Share Center makes it easy for anyone to lead discussions on social media and beyond.”
Here are some of the available infographics. To see all Share Center materials, go to NSSF.org/share.
Share the post "New NSSF Firearms Information Share Center"
The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful so the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a major success, as rimfire guns are fun to shoot and ammo is very affordable. The most popular NRL22 matches have drawn up to 200 rimfire competitors. And now there is a companion rimfire long-range series, NRL22X. Learn more about NRL22 and NRL22X at NRL22.org.
NRL22 is a great way to get into competition shooting with minimal expense. There are five (5) classes: Open, Base, Ladies, Young Guns (8-16) and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1200.00 (so you could spend $700 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Youth, and Ladies Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
The NRL also sponsors NRL22X matches. These involve significantly longer distances for greater challenge. The latest NRL22X match is the XLR Rimfire Rumble, to be held in Grand Junction, Colorado this Saturday, September 18, 2021.
The two videos above from Long Range Shooters of Utah feature footage from the January 2019 course of fire from the NRL22 Rimfire Competition Series. Note the snow-capped hills in the lower video. Useful commentary explains how competitors establish their shooting positions.
How to Participate in NRL22 and/or NRL22X
If you want to get started in NRL22 or NRL22X competition, you’ll need an NRL22 annual membership. These run from $25-$85 depending on class and discipline. CLICK HERE for annual membership information.
NRL22 Membership Benefits Include:
– Eligibility to participate in all NRL22 matches
– Eligibility to participate in all NRL22X matches
– Welcome gift (not all welcome gifts are the same)
– Scoring and Ranking for all events
– Newsletters and updates
– Eligibility for special NRL22 raffles and giveaways
– Access to special NRL discounts from participating sponsors
NRL22 Publishes Monthly Courses of Fire
This video from a Utah NRL22 Match features shooters from each of the four rimfire classes. With the NRL22 program, scores from from local matches like this are ranked against scores from other matches nationwide. In advance of match dates, NRL22.org publishes 5 courses of fire to be used in that month. Each course of fire will always include 2 prone stages, 1 positional, 1 barricade, and a fifth that can be any of those. Details of the course of fire, including target distances, target sizes, time limits, and barricade profiles, are listed at NRL22.org.
Official NRL22 Rimfire Steel Target Package
To facilitate consistent NRL22 match scoring, there is an official NRL22 Rimfire Steel Target Kit. Crafted by JC Steel Targets from AR500 steel, this kit from JC Steel Targets includes 8 hanging targets, 4 KYL (Know Your Limits) targets, plus all needed hangers. That’s lot of steel and hardware for $394.99. There is also an official 2020/2021 Expansion Target Package with 5 more hanging targets for $79.95.
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
Share the post "NRL22 & NRL22X — Fun and Challenging Rimfire Tactical Series"
Thomas Air Rifle with Metal Stock
Custom .22-Caliber Slugs
The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
