When shooting groups at long range on paper it can be difficult to distinguish which bullet holes belong to a particular sequence of shots. If, for example, you shot three 5-shot groups at 600+ yards on a paper target, you would have 15 bullet holes on the target (assuming no misses). But at that distance it would be difficult to see the holes on target (even with a spotting scope). Accordingly, when you inspected the target up close, it would be hard to tell which shots belonged to which group. You might have a vague idea, but couldn’t be sure, without a target camera recording the shot sequence.
Here is a method to separate multiple shots into specific groups so you can better evaluate your load and shooting skills. The trick is pretty simple — mark your bullets with a color from a Sharpie or other felt marking pen. If you are shooting three 5-shot groups, mark five with red, five with green, and five with blue (or purple). Then, when you inspect the target, you can identify the group placements by the colors that appear on the paper.
Round Robin: Using colors you can shoot “Round-Robin” to evaluate seating depths, neck tension, or other variables without having the shot order (and barrel heating) affect group sizes unequally. For example you might have three different neck tensions, each marked with a different color on the bullets. Then shoot Red, Blue, Green in that sequence for five total shots per color.
Smart Tip to Show Colors More Vividly
If the bullet inks are not showing up on your target paper clearly, here is a simple trick that can make the colors “bleed” to be more visible. In your range kit, bring some alcohol solution along with some Q-tips. Then dab the shots on the paper target lightly with wet Q-Tips. Here is the front of a target before and after application of alcohol:
Forum Member NewbieShooter explains: “Dabbing a bit of alcohol on the bullet holes with Q-Tips makes the color pop a bit… especially on the back side.” See below:
In short order you will see the colors spread into the paper, clearly marking the shot holes by distinguishing colors. If you were shooting a dark bullseye, view the the BACK side of the target to see the colors on a light background.
Credits: Bullet Tips photo by Forum Member Dave Way; Target photos by Forum Member NewbieShooter; Story tip from Boyd Allen.
Share the post "Color Bullet Tips to Help Define Long-Range Groups on Paper"
Tumblers and walnut/corncob media are old school. These days many shooters prefer processing brass rapidly with an ultrasonic cleaning machine. When used with the proper solution, a good ultrasonic cleaning machine can quickly remove remove dust, carbon, oil, and powder residue from your cartridge brass. The ultrasonic process will clean the inside of the cases, and even the primer pockets. Tumbling works well too, but for really dirty brass, ultrasonic cleaning may be a wise choice.
Our friend Gavin Gear has evaluated an RCBS Ultrasonic cleaning machine using RCBS Ultrasonic Case Cleaning Solution (RCBS #87058). To provide a real challenge, Gavin used some very dull and greasy milsurp brass: “I bought a huge lot of military once-fired 7.52x51mm brass (fired in a machine gun) that I’ve been slowly prepping for my DPMS LR-308B AR-10 style rifle. Some of this brass was fully prepped (sized/de-primed, trimmed, case mouths chamfered, primer pockets reamed) but it was gunked up with lube and looking dingy.”
UltimateReloader.com Case Cleaning Video (7.5 minutes):
Gavin describes the cleaning exercise step-by-step on UltimateReloader.com. Read Gavin’s Cartridge Cleaning Article to learn how he mixed the solution, activated the heater, and cycled the machine for 30 minutes. As you can see in the video above, the results were impressive. If you have never cleaned brass with ultrasound before, you should definitely watch Gavin’s 7.5-minute video — it provides many useful tips and shows the cleaning operation in progress from start to finish.
Ultra Dry Necks After Ultrasonic Cleaning — Some Suggestions
The Ultrasonic cleaning process gets cartridge brass so “squeaky clean” that increased force may be required to seat your bullets, or they may “grab” as they go in the necks. To reduce bullet-seating effort, you may benefit from adding a little dry case lube inside the case-neck before loading (use a nylon brush). Another trick is adding a teaspoon of Ballistol lube to the cleaning solution. That provides a trace lubricant inside the necks, but does not interfere with powder ignition in any way.
The latest Gen2 RCBS ultrasonic cleaning machine has a large 6.3-quart capacity. That’s nearly 100% larger than the first generation machine in Gavin’s video. The Gen2 machine, $399.99 on Amazon, features a second ceramic heater and transducer to better clean brass cases and firearm parts. The LED is easily programmable, and the timer can be set for up to 30 minutes of cleaning. The original 3.2 quart-capacity RCBS ultrasonic machine, as shown in Gavin’s video, is still available for $189.99 at Midsouth Shooters.
Share the post "How to Clean Brass Effectively with Ultrasonic Cleaning Machines"
CFIUS Clears Sale of The Kinetic Group to CSG
Vista Outdoor Inc. (NYSE: VSTO) and Czechoslovak Group a.s. (“CSG”) have announced that the Committee on Foreign Investment in the United States (“CFIUS”) has cleared CSG’s proposed acquisition of Vista Outdoor’s The Kinetic Group business. CFIUS has concluded its investigation of the Transaction and has determined that there are no unresolved national security concerns. CFIUS clearance was the final regulatory approval required under the merger agreement with CSG. CFIUS is a U.S. government committee that reviews foreign investment transactions to determine their effect on U.S. national security.
The Shooting Wire reports: “Vista Outdoor Inc. cleared a major hurdle in its plans to sell off its ammunition segment, known as The Kinetic Group, to Czechoslovak Group, or CSG, after the Committee on Foreign Investment in the United States (CFIUS) cleared the proposed acquisition of The Kinetic Group business after the Committee determined ‘there are no unresolved national security concerns’. The closing of the transaction remains subject to receipt of the approval of Vista Outdoor’s stockholders[.] The Vista Board recommends stockholder approval based partly on a $2 billion purchase price, representing a $90 million increase from the original $1.91 billion purchase price.”
Michael Callahan, Chairman of the VSTO Board of Directors stated: “The CFIUS process involved a thorough review and investigation of the Transaction by numerous U.S. Government departments and agencies[.] We believe the end result supports our view that CSG — which has deep expertise in supply chain excellence and ammunition manufacturing and strong support for NATO and allied nations — will be an excellent owner of The Kinetic Group. CSG is fully committed to supporting our American workforce, American hunters, and domestic and allied military and law enforcement partners.”
The closing of the transaction remains subject to the approval of Vista Outdoor’s stockholders and other customary closing conditions. The special meeting of Vista Outdoor stockholders to vote on a proposal to adopt the merger agreement with CSG is scheduled to be held virtually on July 2, 2024, at 9:00 a.m. Central Time.
About Vista Outdoor Inc.
Vista Outdoor (NYSE: VSTO) is the parent company of more than three dozen renowned brands that design, manufacture and market sporting and outdoor products. Brands include Bushnell, CamelBak, Bushnell Golf, Foresight Sports, Fox Racing, Bell Helmets, Camp Chef, Giro, Simms Fishing, QuietKat, Stone Glacier, Federal Ammunition, Remington Ammunition and more. Our reporting segments, Outdoor Products (Revelyst) and Sporting Products (The Kinetic Group), provide consumers with a wide range of performance-driven, high-quality and innovative outdoor and sporting products. For news and information, visit our website at www.vistaoutdoor.com.
Share the post "Feds Approve Sale of Vista Outdoor Brands to Czechoslovak Group"
