The October 2024 Edition of Shooting Industry magazine (SI) has a good article explaining the importance of the upcoming election for gun owners. In that article NSSF VP/Gen. Counsel Larry Keane notes that “People need to wake up, get registered and vote”. Keane discusses the potential ramifications of a Harris-Walz administration with SI Editor Jade Moldae, who notes: “If Vice President Kamala Harris is elected president, along with a Democrat sweep of Congress, it’s not a hyperbole to say this would be worst-case scenario for the longevity of our industry.” CLICK HERE for October 2024 Shooting Industry digital edition.
Keane predicts what could happen with a Harris presidency and Democrat-controlled Congress: “If Harris is elected president, what we see from ATF now will only get worse. Zero tolerance for gun dealers will become ‘subzero’ tolerance. [Harris] will appoint anti-gun justices to the Supreme Court — opening up the opportunity to revisit Heller, Bruen, and McDonald decisions. She’ll blow up the filibuster in the Senate … Congress will pass firearm bans, magazine bans and universal background checks. It’ll be ‘Katy bar the door’ — and too late for us to do anything about it.”
Keane pointed out that even if Democrats are unsuccessful in controlling Congress, Harris could act unilaterally — as shutting down firearms imports or exports doesn’t require an act of Congress.
Though Kamala Harris has stated she is a gun owner (claiming to have a Glock pistol), she has frequently supported gun confiscation through mandatory buy-backs. And she says she would like to ban AR15s and other popular, semi-auto rifles. Accordingly, we face a very important 2024 election. Keane states: “This truly is the most important election for the Second Amendment in our lifetime. In the past, Harris called for mandatory confiscation. She now says she isn’t. So, was she lying then? Is she lying now? Or does she just lie now and then? People need to wake up, get registered and vote.”
The article stresses the importance of voting this November: “If we don’t do our part and vote we leave the future of our industry, sport and tradition — and constitutionally protected right — to chance. [T]here’s too much at stake to stand by and do nothing [so] don’t risk your rights, vote!”
State Elections Are Also Key to Protecting Gun Owners’ Rights
In a related Shooting Industry article, Colorado shooting instructor Ava Flanell notes that STATE elections are very important, as most anti-gun statutes come from state legislation. Yes, the 2024 Presidential election is very important, but state elections are also key to protecting gun rights.
Ava notes: “When egregious gun laws are passed, many people blame their governor, but these laws wouldn’t even be put on the governor’s desk if we stopped them in the state legislature.” Ava explains that it is vital that “We elect pro-gun individuals at the state house and state senate level. It means we must vote and encourage others to vote. Apathetic voters, especially the millions of gun owners and hunters who aren’t even voting, must be encouraged to step up and vote for our rights.”
Ava observes that “Bloomberg, Soros and other radical left-wing billionaires have spent a fortune in nearly every state to get politicians elected to local and state governments that support their radical agendas. These states have passed the bulk of anti-gun legislation in the last few years.” Ava stresses the importance of voting for pro-Second Amendment state and local leaders: “These local elections are where we, the voter, can have just as big of an impact. We must be willing to do our part and get involved.”
Ava Flanell is firearms instructor who operates elitefirearmsandtraining.com in Colorado. In the video above, Ava explains key issues on the ballot in Colorado this November.
Share the post "Be Sure to Register to Vote and Vote in the Upcoming Election"
This Gun Digest book has become a “go-to” resource for NRL22 and PRS Rimfire shooters. Key topics included in this 2021 Edition full-color Gun Digest book include: rimfire semi-autos and how they work; bolt-action accuracy; match shooting skills; DIY precision gunsmithing; hunting with rimfires; and the future of the rimfire market.
With the growth of rimfire tactical competition, the .22-Caliber rimfire rifle is more popular than ever. Every major gun manufacturer has brought at least one new .22 LR rimfire rifle to the market in the last two years. Gun Digest’s Rimfire Revolution has extensive coverage of new models from major manufacturers.
The .22 Long Rifle (.22 LR) is the planet’s most popular ammunition type and firearm chambering. The .22 LR is used in the Olympics by 3P marksmen, but it also serves benchrest competitors, NRL22 shooters, backyard plinkers, small-game hunters, and tactical trainers. With the expansion of NRL22 matches (and the PRS equivalent), the humble .22 LR is undergoing a major resurgence in the USA. And with centerfire reloading components being so costly and difficult to find, many folks are shooting less centerfire, but way more rimfire.
This 272-page book also covers .17-caliber rimfire cartridges: 17 HM2 (Mach 2), 17 HMR, and 17 WSM. These are all excellent varmint rounds, with the 17 WSM effective out to 250 yards. The 17 HM2 will run in a normal .22 LR action and feed from standard .22 LR magazines. So, for most rifles, all you need to do a .22 LR to 17 HM2 conversion is a barrel switch. That gives your rimfire rig twice the versatility. Shoot .22s and .17s with the same gun.
NRL22 — Challenging Practical Competition with .22 LR Rifles
The USA has seen a big growth in rimfire tactical matches over the last five years. Right now there are probably ten times as many rimfire tactical matches as sanctioned PRS and NRL centerfire matches. The reason is simple — rimfire ammo is much less costly, and clubs can run challenging rimfire tactical matches at nearly any outdoor gun range that allows shooting out to 200+ yards.
NRL22 Competition — Tactical Rimfire Matches
The NRL22 match format is a great shooting discipline. NRL22 offers a high fun factor at relatively low cost. You don’t have to reload match ammo. A couple of 50-round boxes of .22 LR ammo will get you through the match. While some people bring lots of gear to matches, that’s by choice and not by necessity. You can keep it simple and still be competitive (and win).
Tips for NRL22 Competitors by Jonathan Ocab
I am a match director at my gun club and run our local NRL22 matches. People often ask me for tips for competing in NRL22. First, I recommend getting the course of fire for the month in advance and practicing those stages at the range. Here are other specific tips that should help NRL22 competitors improve their gun-handling and match results.
1. Dry Fire Practice — If you are not able to do live fire practice at the range, I encourage shooters to practice their shooting positions at home via dry fire. Setup props or barricades with pasters or other faux targets on a wall in the garage or inside the house and run through each stage.
2. Scope Magnification Level — The most common issue I see with newer shooters in NRL22 is the tendency to maximize their scope magnification. The timer will start, and the shooter gets into position on a target, but the scope is set to 15x or higher and the shooter can’t find the target. The shooter lowers the magnification, locates the target, and then increases the magnification again, takes the shot, transitions to another target, and repeats the process of decreasing magnification, locating target, etc. Novice NRL22 shooters should try using the mid-range magnification. Try shooting 7x-12x and learn to balance field of view and target image.
Share the post "Good Guide for NRL22 Competitors — Rimfire Revolution Book"
Most modern match rifle barrels are stainless steel alloy. These are from Benchmark Barrels.
Though some grades of stainless are more corrosion-resistant, ALL varieties of stainless steel can rust if they are not handled and stored properly.
Some folks feel that they don’t have to worry about rust and corrosion on stainless steel barrels, actions, and other components. That’s not really true. “Stainless” is a bit of a misnomer. First, there are different types of stainless steel alloys, with different degrees of rust resistance. 300 series stainless is more corrosion resistant than the 416 stainless commonly used in barrels. The composition (by percentage weight) of 416 stainless is 0.15% carbon, 12-14% chromium and the rest iron. 416 stainless steel lacks the roughly 10% nickel content that makes the 300 series more corrosion resistant in atmospheric conditions. But because 416 handles pressure better and is easier to machine (than 300 series steel), 416 stainless remains the better choice for barrels.
Though some grades of stainless are more corrosion-resistant, ALL varieties of stainless steel can rust if they are not handled and stored properly. Forum reader Kells81 observed: “Wanna see some rusted stainless? Go to the big “C” brand store in Ft. Worth. Every stainless gun they have on the used gun rack is rusted.” Tom Easly of TRE Custom explains: “Sweat is very corrosive. Sweat and blood will rust many stainless steels. I hate to handle my guns or drip on them when I sweat. It really helps to just wipe them good with a wet rag, dry and wipe on a light coating of gun oil. I think most stainless barrels are made from type 416 stainless, and it is generally pretty corrosion resistant, but not when exposed to sweat, blood, or chlorates (corrosive priming), and some other electrolytes.”
Forum member Jacob, who is studying materials science at LSU, provides this technical information: “The basic resistance of stainless steel occurs because of its ability to form a protective coating on the metal surface. This coating is a ‘passive’ film which resists further ‘oxidation’ or rusting. The formation of this film is instantaneous in an oxidizing atmosphere such as air, water, or other fluids that contain oxygen. Once the layer has formed, we say that the metal has become ‘passivated’ and the oxidation or ‘rusting’ rate will slow down to less than 0.002″ per year (0.05 mm per year).
Unlike aluminum or silver, this passive film is invisible in stainless steel. It’s created when oxygen combines with the chrome in the stainless to form chrome oxide which is more commonly called ‘ceramic’. This protective oxide or ceramic coating is common to most corrosion resistant materials.
Halogen salts, especially chlorides, easily penetrate this passive film and will allow corrosive attack to occur. The halogens are easy to recognize because they end in the letters ‘ine’. Listed in order of their activity they are: fluorine, chlorine, bromine, iodine, astatine.
These are the same chemicals that will penetrate Teflon and cause trouble with Teflon coated or encapsulated O-rings and/ or similar coated materials. Chlorides are one of the most common elements in nature and if that isn’t bad enough, they’re also soluble, active ions. These provide the basis for electrolytes. The presence of electrolytic solutions can accelerate corrosion or chemical attack.”
CONCLUSION: Stainless steel barrels and components won’t rust nearly as fast as blued steel, but you still have to take precautions — particularly removing sweat and corrosive salts from the barrel. Also, don’t let moisture build up inside or outside of the barrel. We recommend wiping your barrels and actions with Eezox, or Corrosion-X after each use. These are both extremely effective rust-fighters that go on thin, without leaving a greasy residue. (Eezox leaves a clear finish, while Corrosion-X has a slightly waxy finish.) Also store your guns in Bore-Store bags when the guns go in the safe. Bore-Stores wick away moisture, and the synthetic fleece inner surface is treated with rust-fighting chemicals. Bore-Stores also protect your guns against dings and scratches.
Share the post "Stainless Barrels and Actions Resist Corrosion, But Can Still Rust"
Though Kamala Harris has stated she is a gun owner (claiming to have a Glock pistol), she has frequently supported gun confiscation through mandatory buy-backs. And she says she would like to ban AR15s and other popular, semi-auto rifles. Accordingly, we face a very important 2024 election. Keane states: “This truly is the most important election for the Second Amendment in our lifetime. In the past, Harris called for mandatory confiscation. She now says she isn’t. So, was she lying then? Is she lying now? Or does she just lie now and then? People need to wake up, get registered and vote.”
CONCLUSION: Stainless steel barrels and components won’t rust nearly as fast as blued steel, but you still have to take precautions — particularly removing sweat and corrosive salts from the barrel. Also, don’t let moisture build up inside or outside of the barrel. We recommend wiping your barrels and actions with Eezox, or Corrosion-X after each use. These are both extremely effective rust-fighters that go on thin, without leaving a greasy residue. (Eezox leaves a clear finish, while Corrosion-X has a slightly waxy finish.) Also store your guns in 
