Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









November 27th, 2024

2025 NRA National Rifle & Pistol Championships Dates/Locations

nra national matches rifle pistol 2025 calendar dates locations

The 2025 NRA National High Power Rifle, Smallbore Rifle, and Precision Pistol Championships — the NRA National Matches — will be held at multiple locations across the USA. This marks a notable change from recent years when NRA rifle and pistol championships were held at Camp Atterbury, Indiana. After discussion with representatives from each discipline, the NRA has determined that in 2025, these NRA National Matches will take place at multiple locations in Ohio, Oklahoma, and Wisconsin.

The 2025 NRA National Matches kick off with the National High Power Rifle Across the Course (XTC) Championships at Winnequah Gun Club in Lodi, Wisconsin, June 1-7, 2025 (see below).

National high power rifle championship winnequah gun club

After that, the Nat’l High Power Mid-Range Championships will be conducted at Oklahoma City Gun Club in Arcadia, Oklahoma, June 4-8, 2025, followed by the Nat’l High Power Long-Range Championships at Alliance Rifle Club in Malvern, Ohio, July 2-6, 2025. The Nat’l Precision Pistol Championships will be at the Cardinal Shooting Center in Marengo, Ohio, July 6-10, 2025, and the National Matches will conclude with the Nat’l Smallbore Rifle Championships, also at the Cardinal Shooting Center, July 20-27, 2025.

national long range high power championships 2025

Here Are the Dates and Locations for the 2025 NRA National Matches.

NRA National High Power Across the Course Championships
Winnequah Gun Club — Lodi, Wisconsin
Dates: June 1-7, 2025
Registration links and official match program: coming soon
winnequahgunclub.org

NRA National High Power Mid-Range Championships
Oklahoma City Gun Club — Arcadia, Oklahoma
Dates: June 4-8, 2025
Registration links and official match program: coming soon
okcgunclub.org

NRA National High Power Long-Range Championships
Alliance Rifle Club — Malvern, Ohio
Dates: July 2-6, 2025
Registration links and official match program: coming soon
alliancerifleclub.org

NRA National Precision Pistol Championships
Cardinal Shooting Center — Marengo, Ohio
Dates: July 6-10, 2025
Registration links and official match program: coming soon
thecardinalcenter.com

NRA National Smallbore Championships
Cardinal Shooting Center — Marengo, Ohio
Dates: July 20-27, 2025
Registration links and official match program: coming soon
thecardinalcenter.com

nra national matches rifle pistol 2025 calendar dates locations

2025 NRA National Matches Calendar

Here is the 2025 NRA National Matches Calendar showing major championship events and dates. Different events are indicated by various colors: Red for High Power Across the Course, Yellow for High Power Mid-Range, Green for High Power Long-Range, Dark Red for Smallbore and Blue for Pistol. Click the Calendar to ZOOM for easier reading.

nra national matches rifle pistol 2025 calendar dates locations

Top image by John Parker, Editor, Shooting Sports USA.

Permalink - Articles, Competition, Handguns, Shooting Skills 1 Comment »
November 27th, 2024

Barrel Cut-Down Test Reveals 6.5 Creedmoor Velocity Per Inch

Rifleshooter.com 6.5 Creedmoor cut-down test

Rifleshooter.com does some great original research — providing “hard data” you can’t find anywhere else. Here are the eye-opening results of Rifleshooter.com’s 6.5 Creedmoor barrel cut-down test. You may be surprised at the results. Read on…

What do you get when you cut a 6.5 Creedmoor-chambered barrel down to just over 16 inches? A lot more velocity than you might think. Our friends at Rifleshooter.com conducted a remarkable barrel cut-down test with 6.5 Creedmoor test rifle, shortening the barrel from 27 to 16.1 inches in one-inch increments. Surprisingly, with a 142gr Sierra MK, the total velocity loss (as measured with a Magnetospeed) was just 158 FPS, an average of 14.4 FPS per inch of barrel length. With the lighter 120gr A-Max bullet, the total velocity loss was 233 FPS, or 21.8 FPS average loss per inch of barrel.

» CLICK HERE to SEE All Velocity Values at All Barrel Lengths

To perform this velocity test, our friend Bill, Rifleshooter.com’s editor, built up a 6.5 Creedmoor rifle using a Remington Model 7 action, 1:8″ twist Green Mountain CM barrel, and MDT LSS Chassis, all obtained from Brownells.com.

Test Procedure
Five (5) rounds of each type of cartridge were fired at each barrel length and the velocity data was recorded with a MagnetoSpeed V3 barrel-mounted chronograph. The rifle was then cleared and the barrel was cut back one inch at a time from 27″ to just over 16″. NOTE: During this winter test, the air temperature was a very chilly 23° F. One would expect higher velocities across the board had the outside temperature been higher.

» Read Full Story with All Test Results at Rifleshooter.com

The photo below shows how the barrel was cut down, inch-by-inch, using a rotary saw. The barrel was pre-scored at inch intervals. As the main purpose of the test was to measure velocity (not accuracy) the testers did not attempt to create perfect crowns.

Rifleshooter.com 6.5 Creedmoor cut-down test

6.5 Creedmoor vs. Other Mid-Sized 6.5mm Cartridges
The 6.5 Creedmoor is a very popular cartridge with the tactical and PRS crowd. This mid-size cartridge offers good ballistics, with less recoil than a .308 Winchester. There’s an excellent selection of 6.5mm bullets, and many good powder choices for this cartridge. When compared to the very accurate 6.5×47 Lapua cartridge, the 6.5 Creedmoor offers similar performance with less expensive brass. For a tactical shooter who must sometimes leave brass on the ground, brass cost is a factor to consider. Here’s a selection of various 6.5mm mid-sized cartridges. Left to right are: 6.5 Grendel, 6.5×47 Lapua, 6.5 Creedmoor with 120gr A-Max, 6.5 Creedmoor with 142gr Sierra MK, and .260 Remington.

6.5 Creedmoor Rifleshooter.com velocity barrel cut cut-down test saw blade

When asked to compare the 6.5 Creedmoor to the 6.5×47 Lapua, Rifleshooter.com’s editor stated: “If you don’t hand load, or are new to precision rifle shooting, get a 6.5 Creedmoor. If you shoot a lot, reload, have more disposable income, and like more esoteric cartridges, get a 6.5×47 Lapua. I am a big fan of the 6.5×47 Lapua. In my personal experience, the 6.5×47 Lapua seems to be slightly more accurate than the 6.5 Creedmoor. I attribute this to the quality of Lapua brass.” Now that Lapua offers 6.5 Creedmoor brass with small primer pockets, the 6.5 Creedmoor is even more attractive.

The creator of Rifleshooter.com also operates a Custom Rifle Building enterprise and gun shop in Long Island, New York: 782 Custom Guns Ltd.. He tells us: “We offer an unparalleled level of gunsmith machine shop services in the Long Island region. From precision rifles (USMC M40A3/A5/A6 XM3 clones) to customized Remington 870 and Mossberg 590 shotguns, and customized 1911s, chances are if you can dream it, we can build it!”

Permalink - Articles, - Videos, Gear Review, Gunsmithing No Comments »
November 27th, 2024

Best Barrel Cleaning Methods — Top Barrel Makers Offer Advice

Shooting Sports Lohman Barrel

Ask 10 shooters about barrel cleaning and you’ll get 10 different opinions. This reflects that fact that different fouling problems demand different solutions. For example, solvents that work well for copper may not be the best for hard carbon (and vice-versa). To come up with the right solution, first you must understand the nature of the fouling in your barrel.

CLICK HERE to read Full Match Barrel Care Article »

Chip Lohman, former Editor of Shooting Sports USA Magazine, has authored an excellent article on barrel maintenance and cleaning. Chip’s article, Let the BARREL Tell You — Match Barrel Care, is in the Shooting Sports USA digital archives. In this article, Chip shares the knowledge of a dozen experts including respected barrel-makers Frank Green (Bartlein Barrels), John Krieger (Krieger Barrels), Dan Lilja (Lilja Barrels), and Tim North (Broughton Barrels).

John Krieger Interview with AccurateShooter at SHOT Show:

The debate about the proper care of a match barrel is a hot one, spiked with folklore and old wives’ tales, Lohman said. He and his staff set out to set the record straight: “We tried to interject some science into the discussion of cleaning a match barrel,” he explained. In his article, Lohman writes:

Why worry about a little barrel fouling when the throat is subjected to a brutal 5,600° F volcano at 55,000 PSI? To investigate these and other questions about taking care of a match barrel, we spoke with a dozen experts and share their knowledge in this first of a series of articles.

After listening to folks who shoot, build barrels or manufacture cleaning solvents for a living, we concluded that even the experts each have their own unique recommendations on how to care for a match barrel. But they all agree on one thing — the gun will tell you what it likes best. Because the life expectancy of a match barrel is about 1,500 to 2,500 rounds, the objectives of cleaning one should include: preserve accuracy, slow the erosion, and remove fouling — all without damaging the gun. This article doesn’t claim that one cleaning method is better than the next. Rather, we set out to interject a little science into the discussion and to share some lessons learned from experts in the field.

For more Shooting Sports USA articles, visit www.ssusa.org.

Permalink - Articles, - Videos, Tech Tip No Comments »