How to Choose Optimal Neck Bushing Size — Whidden Explains
Whidden Gunworks makes great sizing and seating dies. The Whidden full-length sizing die with neck bushing is very popular because it allows you to “tune” the neck tension by using different bushings, with larger or smaller inside diameters. In this video, John Whidden explains how to choose a the right bushing size for use with your neck-sizing and full-length sizing bushing dies.
For most applications, John suggest starting with the caliper-measured outside diameter of a loaded cartridge (with your choice of bullet), and then SUBTRACT about three thousandths. For example, if your loaded round mics at .333, then you would want to start with a 0.330 neck bushing. John notes, however, that you may want to experiment with bushings, going down a thousandth and up a thousandth. With thin In addition, as your brass ages and the necks harden, you may want to change your bushing size.
Quick Tip: Try Flipping Your Bushings
You may also want to experiment with “flipping” your neck bushings to alternate the side that first contacts the neck of the case. (One side of the bushing is usually marked with the size, while the other side is unmarked.) So try “number side up” as well as “number side down”.
Some folks believe that one side of the bushing may allow a smoother entry, and that this can enhance concentricity. Other people think they can get very slightly more or less neck tension depending on how the bushing is oriented. This is a subtle effect, but it costs nothing to experiment.
If one bushing orientation proves better you can mark the “up” side with nail polish so that you can always orient the bushing optimally. NOTE: We have confirmed that some bushings are actually made with a slight taper. In addition, bushings may get distorted slightly when the brand name and size is stamped. Therefore there IS a reason to try both orientations.
Similar Posts:
- Whidden Explains How to Find the Optimal Neck Bushing Size
- Choosing the Optimal Neck Bushing Size — Tips from Whidden
- Selecting Optimal Neck Bushing Size — Tips from John Whidden
- Choosing the Best Neck Bushing Size — Tips from John Whidden
- Selecting Bushings for Bushing Dies — Tips from John Whidden
Share the post "How to Choose Optimal Neck Bushing Size — Whidden Explains"
Tags: Bushing Die, Bushing Selection, John Whidden, Neck Bushing, Neck Tension, Whidden Gunworks
