Pair of Premium F-Open Rifles with Kelbly Golden Bear Actions
Report by Shiraz Balolia, CEO Grizzly Industrial
This project was started 2-3 years ago when I decided to build two brand-new rifles based on the Cerus riflestock chassis. I had my own highly-figured woods and sent them to Will at Cerus Rifleworks. Within a few months I received back two very nice-looking stock blanks but unfortunately they were made for a regular recoil pad system. I was going to install the R.A.D. (Recoil Absorption Device) systems and failed to mention that to Will. Further the thumbhole slot for the adjustment knob was through-cut on both sides of the stock and placed in a position where it would interfere with the R.A.D. recoil system installation. Accordingly, some serious modifications were in order.
Modifying the Cerus Stocks and Installing the R.A.D. System
The very first thing I did was plug up the thumbhole slot in each bank and then installed decorative caps in highly-figured contrasting woods. I also wanted the thumb-knob adjustment to be accessible and adjustable using only one finger so I shifted the whole system forward and to the right. I was now able to install the R.A.D. recoil system (see below) without interfering with the cheekpiece adjustment.
Next, I installed the bottom wider track for my rear bag and also carved out the finger grooves in the grip. The blanks were quite long so I cut off approximately two inches from the front end of each stock and also deepened the large tracking cavity under the fore-ends. I went ahead and inlaid my name in Mother-of-Pearl on the Walnut stock.
Gold Kelbly Actions for Two World-Class Tack-Drivers
The two sequentially-numbered Golden Bear F-Class actions (057 and 058) arrived from Kelbly at different times and the stocks were sent to Alex Sitman at Masterclass Stocks for bedding the actions into the stocks. Alex does an outstanding job on pillar bedding and has done most of my rifles for many years.
The stocks were then sent to Sims Guitar Finishing for clear coating with “wet look” finish on the stocks. Chambering of the barrels was done in-house by Dave, our top engineer at Grizzly Industrial. Dave has chambered most of my rifles in recent years. Both he and I have been trained by Gordy Gritters in precision chambering. Finally, the rifles were assembled, scopes installed, and tested out. Both are tack-drivers made for world-class competition.
Shiraz Tests his .300 Shiraz F-Open rifle. As you’d expect shooting heavy 215gr Berger Hybrids, the recoil is significant, but the rifle tracks perfectly with smooth return to battery.
Rifle #1 – Walnut Stocked .300 Shiraz
• Chambered for .300 Shiraz (modified .300 WSM)
• Stock made of highly-figured Walnut with Curly Maple inner laminations
• Kelbly Golden Bear F-Class action
• Bartlein 1:10″-twist barrel, 31″ length
• March 10-60x56mm High Master scope with Barrett rings
• Bald Eagle tuner
• Jewel trigger
Rifle #2 – Curly Maple Stocked .284 Shiraz
• Chambered for .284 Shiraz (modified .284 Winchester)
• Stock made of highly-figured Curly Maple as well as Walnut and Wenge inner laminations
• Accents and inlays as well as the base shoe are made of Curly Koa wood
• Kelbly Golden Bear F-Class action
• BRUX 1:9″-twist barrel, 31″ length
• March 10-60x56mm High Master scope with March rings
• Bald Eagle tuner
• Jewel trigger
Two Improved Cartridges — .300 Shiraz and .284 Shiraz
The two rifles run their own respective “Improved” cartridges. The dark walnut rig runs the .300 Shiraz which is based on the .300 Winchester Short Magnum (WSM). The maple 7mm runs the .284 Shiraz derived from the .284 Winchester. Shiraz developed these two improved cartridge designs to boost the performance of the parent cartridges which are both quite popular among F-Open competitors. The .284 Shiraz has similarities to the popular .284 Shehane wildcat.
.300 Shiraz Load Information: Shiraz loads his .300 Shiraz with Berger 215gr Hybrids, CCI BR2 Primers, and Hodgdon H4350 Powder. This load produces groups under quarter-MOA.
.284 Shiraz Load Information: The .284 Shiraz (shown below) is loaded with Berger 180gr Hybrids, again with CCI BR2 Primers, and H4350 powder. And like Shiraz’s .30-cal rifle, this handsome 7mm rig delivers sub-quarter-MOA grouping capability.
This stock is made from highly-figured Curly Maple with Walnut and Wenge wood inner laminations. Accents and inlays and the base shoe are made of Curly Koa wood.
About Shiraz Balolia
Shiraz Balolia is the founder and CEO of Grizzly Industrial. He is also one of the USA’s leading F-Class shooters. He has been a Team USA member and F-Open Team USA Captain, and in individual competition he won three straight Canadian F-Open Championships (2014, 2015, 2016). That Canadian Three-Peat is definitive proof of Shiraz’s stellar long-range shooting talent.
In the video below, created when Shiraz was F-Open Team USA Captain, Shiraz works with Palma Team Coach Gary Rasmussen. With the target at 800 yards, Shiraz shows how a shooter works with a wind coach. Three cameras are employed to show the target, the shooter, and the spotter’s-eye view.
This video starts with a lesson on target reading, then Shiraz and Gary work together to judge the wind. Watch as Shiraz makes ten straight “10 point” center hits at 800 yeards. A inset frame in the video shows bullet placement after each shot. This video is highly recommended for all long-range competitive shooters and coaches.
Here is Shiraz (top left) with Team Grizzly, the 2018 U.S. F-Open Championship Team. Members are: Shiraz Balolia, Emil Kovan, David Mann, John Myers, Trudie Fay (Coach).
Do you have an Eliseo Tubegun that you use for sling-shooting competitions, but would like to try your hand at F-Class Open matches? Well here is a low-cost, yet very effective add-on that can transform your TubeGun into a serious F-Open rifle. The bolt-on rails also work great for load development if you want to use a front rest with 3″-wide front bag for greater stability and repeatability.
Competition Machine’s Gary Eliseo is a very smart designer as well as a talented shooter. The inventor/builder of the popular Competition Machine Tubegun chassis systems, Gary offers a bolt-on bag-rider accessory. Gary call this his PickleFork fore-end extension. The Pickleforks are rails that fit to the sides of the tubular fore-end/handguard on his chassis systems. This allows you to use a pedestal-style front rest for F-Class competition.
Pickleforks also provide a much more stable platform for load testing, varmint hunting, or any kind of rest-assisted precision shooting. These PickleForks transform a Tubegun into an ultra-stable, straight-tracking rig when used with a competition-style front rest.
Gary explains: “Now you can have the same super low-boreline, long ‘wheelbase’ and vertical sides of our innovative F1 F-Class chassis system for your tube chassis. The new PickleForks attach directly to the sides of the F-Class/Tactical fore-ends, no modifications are required. They are very rigid with no flex or twist and make the rifle track like it’s on rails.” The new Eliseo Competition Machine PickleForks are offered for a very reasonable $70.00 per pair, with Cerakote finish. (You get two metal units, one for each side of the fore-arm). For more information, visit www.GotXRing.com or call (928) 649-0742.
Product Tip from EdLongrange. We welcome reader submissions.
In this article we cover a better barrel cooler you can build yourself for under $15. This uses a high-speed inflator fan sold on Amazon, along with a piece of temp-stable tubing. Forum member (and popular YouTube host) F-Class John devised this system. He found it cools his barrels in less than half the time of some other products. And the system can also serve as an Empty Chamber Indicator (ECI).
Barrel coolers perform an important function — reducing barrel operating temperatures. This can definitely help preserve barrel life and help maintain good accuracy in competition. In addition, keeping barrels cool can reduce the chances of excess chamber pressure, an important safety concern.
There are a variety of commercially-available barrel cooling systems. There are external fans, as well as internal, slip-in systems than can do double duty as an Empty Chamber Indicator (ECI). You can get the original yellow $39.99 BarrelCool or the red $59.99 RifleKuhl from Magnetospeeed. Both are good products. But F-Class John came up with a system that works even better — one you can build for a fraction of the cost of those yellow or red fans.
Build Your Own Barrel Cooler for Under $15
This system is easy to put together. Order a $11.99 YIVAR pump from Amazon. This is a small, high-output pump designed to inflate air mattresses. Then get some high-temp-rated tubing from a local supply shop. Then trim the case-head off an old piece of brass. Taper the end of the tube a bit and fit it in the case. NOTE: Use of the fitted case is optional. Having the case provides a nice fit in your chamber. But the system works pretty well just with the tubing and Yivar air pump.
In his .284 Win barrel, the Yivar pump system blows air at 10+ mph out the muzzle. F-Class John says that is “about three times the velocity of other systems”. The Yivar pump “holds about 45 minutes of charge” so he can use it for 15 minutes after each of three strings in a match. And then it can be recharged from a USB-compatible battery pack at the range. John notes the fan continues to blow about the same speed for the full 45-minute charge duration.
Key Benefits of this system
1. Faster Cooling
2. Low Cost (under $15)
3. Longer run time on battery
4. Fan battery is USB rechargeable
5. Finally a use for that worn-out brass
John confirmed the effectiveness of his barrel cooler using a stick-on temperature tape placed on the barrel. This showed that his fan system cooled the barreled in less than HALF the time as the plastic commercial fan systems. In addition, his run time was excellent, and the Yivar’s built-in Lithium-Ion battery is fully rechargeable so he never has to buy expensive batteries.
What are the downsides? Not many. The fan IS somewhat noisy — watch video at 4:04-4:28 time mark to hear the fan. F-Class John notes, however, that the Yivar fan is about 4 decibels (dB) quieter than a Magnetospeed RifleKuhl, so the Yivar’s noise is not that bad.
Here are comments from YouTube viewers who like F-Class John’s invention:
Finally something affordable! It’s compact and can be recharged at the range. I have room for this but not all the other gadgets you show. And a poor pensioner like my self can afford it! Thanks for the tip.
Ingenious and awesome idea! I bought one as soon as I saw this. I’ve been thinking about getting a cooler when I’m testing my loads. Thanks!
Brilliant… Brilliant… Brilliant! I have been deferring buying a barrel cooler for years now on account of wanting to spend my toy fund budget on other things. Considering how cheap it is to build, there is no excuse to not make one now.
Fan with Plain Hose Also Works Well (No Brass Case Cutting/Fitting Required)
F-Class John likes the custom fit he achieves with the hose inserted into a piece of modified brass. However he notes that the system also works well with no brass at all — i.e. just hose and fan. If you have a small diameter chamber, this may actually work better. Simply put the hose on the fan, trim/taper the forward hose end to fit and you are good to go.
F-Class John explains: “The heavy duty tubing and the motor works just fine without a brass case. The hose can sit in the chamber by itself. Obviously not every brass case will easily allow for you to put it on the end of the tube. For many people simply using the tube (without brass) may be the simpler option.”
.22 LR Rimfire Rifles and Air Rifles Shooting Side by Side — Same Match, Same Targets.
Air Rifles and .22 LR Rimfires Compete Together
There’s a new game in town — an innovative 50-yard benchrest discipline where .22 LR shooters and Air Rifle aces compete shoulder to shoulder. This new Rimfire + Airgun sport was created by the National 50 Benchrest League (aka “N50″) which now has 16 registered clubs in ten U.S. States.
The N50 League held its first-ever National Championship at the NRA Whittington Center in Raton, NM earlier this month. This new organization has air rifles and rimfire rifles competing together. Notably, at the first-ever N50 Nationals, a purpose-built .22-caliber slug air rifle won against unlimited benchrest .22 LR rifles. We believe that may well be the first-ever airgun victory in a 50-yard benchrest match over serious rimfire competition.
Top Guns at Inaugural N50 Match
Lou Fontana took the overall victory in the match with a 2961 score. Lou shot both air rifles and rimfire rifles in the match, proving he’s a master of both types of guns. Ardey Vad finished second with 2957, while gun-builder Mike Niksch (Thomas Rifles) took third with 2952. Mike’s radical, advanced Thomas air rifle with electronic trigger is featured below. CLICK HERE for full N50 Nationals Results.
Lou, who hails from California, enjoyed the match, noting: “I have a good mentor and a better air rifle than me — my Thomas #33″. Lou added: “Thank you all that attended and special thanks for those that helped in any way to make this inaugural event a good time. We had nice weather, good temperatures, tricky wind, and a little rain. States represented were Washington, Colorado, Nevada, Oklahoma, New Mexico, Arizona, and California.” Lou also praised Joseph Friedrich, one of the founding fathers of N50. Joe tirelessly scored the targets, with help from Mike Niksch’s wife Matti.
Commentary by Joe Friedrich, Open Grove Benchrest
The new National 50 Benchrest League (N50) is a unique shooting experience. We shoot air rifles with pellets and slugs alongside .22 LR Rimfire shooters. We currently have sanctioned clubs throughout the USA offering competition and good fellowship.
N50 has three Classes: Pellet, Sportsman, and PRO. The first Pellet Class is strictly for pellet airguns ranging in calibers from .177-.30 using Diabolo-style pellets from various manufacturers.
The second class is the Sportsman Slug/Rimfire. This combined class allows any factory air rifle shooting commercially-made slugs in calibers from .177-.30 to compete against any factory rimfire that utilizes a factory-barreled action with no attachments to barrel. Pellet air rifles may also compete in this class.
The third class is the PRO Class, and no you do not have to have some magic card that says “Professional” to compete. This class allows purpose-built air rifles, and what we call “unlimited” rimfire rifles to compete. Three types of loads are allowed in PRO Class: .177 slug air-driven, .22 slug air-driven, and any .22 LR ammunition.
Another point — in N50, competitors are allowed to move up in class — you aren’t restricted to a “lower” division. For example, Pellet Class shooters can also move up to shoot in Sportsman and Pro. In addition, Factory rimfires are allowed in Pro Class. This way shooters with the less-expensive rifles can shoot more relays and also see how they compete with the unlimited rigs. It’s all about having fun.
We wanted to make N50 as simple as we could combining air rifles with rimfire so folks who have a factory rimfire can participate and have fun. We also did not want a lot of classes, so combining the two gun types would be simpler. To be honest we were worried that the rimfires will outpace the air rifles, but that was not the case at this year’s Nationals.
National 50 Benchrest League Rules and Course of Fire
The official N50 website, National50.org, lists N50 rules, classes, courses of fire, and membership requirements. There are currently 16 affiliated clubs nationwide, with more coming soon.
General Rules — Here are some of the more notable N50 General Rules that apply to N50 matches:
Target Distance: 50 yards
Match Times: 20 minutes per target
Targets: Official targets produced and distributed by N50
Aggregate Score: Cumulative score of 3 targets shot in sequence on same day
Scoring: No competitor shall score their own target
As far as hardware, N50 is pretty open. For all 3 classes, any scope is allowed and any trigger is allowed. For all 3 classes, stocks are unrestricted, stocks may be bedded, and rifle weight is unlimited. However, the Sportsman Class must retain factory barrel and action. N50 competitors in all classes may use 1-piece rests, 2-piece rests, bags, or bipods — whatever they prefer.
Mike Niksch, owner of Thomas Rifles, won the PRO class with a very strong performance. What is remarkable, and perhaps even historic, is that Mike won with an air rifle, defeating all the high-end unlimited-type .22 LR rimfire rifles in the process. This may be the first time an air rifle out-performed high-end rimfire rigs in head-to-head competition, shooting the same targets in the same match. Overall Match Winner and PRO Class runner-up Lou Fontana observed: “The real significance of this weekend is that Mike Niksch and his brand new Thomas Slug air rifle outshot several unlimited .22 LRs in PRO class. This should be a paradigm shift for most. That may have never been done in competition before. I’ll add it was done at the NRA Whittington Center monitored by a NRA Range Officer.”
Look carefully at that photo. You’ll note Mike’s right hand is on a black box, NOT a conventional trigger. The wood-stocked air rifle Mike shot at Raton is equipped with a state-of-the-art electronic trigger of Mike’s own design. To fire a shot, Mike simply pushes a button that sends an electric impulse via a wire. This trips a mechanism inside the rifle’s action which releases the pressurized air. The system works very well and actually makes the Thomas air rifles simpler to build. The big advantage is that no movement is imparted to the rifle.
Thomas Air Rifle with Metal Stock
While Mike Niksch shot a wood-stocked rig at Raton, Mike also crafts a version of his rifle with an alloy stock and conventional trigger. We shot a video of Mike with this gun at the Open Grove Range in California (see above). Mike builds air rifles with the buyers’ choice of stock. He likes both the wood and the metal versions, and both shoot great — check out that 10-shot group Mike drilled at Open Grove.
A brilliant innovator, Mike has created a rifle design that sets new standards for airgun accuracy. At right is a 10-shot group Mike shot at 50 yards at the Open Grove range with the rifle in the video. Few centerfire rifles could match that accuracy. We asked Mike to demonstrate his rifle’s accuracy, and he sure delivered!
Custom .22-Caliber Slugs
Like many top N50 airgun competitors, Mike forms his own slugs, starting with strings of lead. The lead is cut in short sections then formed up in special bullet-making dies.
The finished .22-caliber slugs look very similar to rebated boat-tail centerfire match bullets. And boy do they shoot!
Mike has tried a wide variety of commercially-available slug designs in his sophisticated air rifles. But nothing has shot as well as the slugs he forms himself. One reason could be that Mike uses custom .22 LR barrels originally designed for .22 LR rimfire rigs. It may be that commercially-made slugs have not yet been optimized for these smallbore barrels. Whatever the reason, Mike’s home-made slugs shoot better than anything he can buy. He has shown us some 100-yard groups that would make centerfire shooters envious.
Ace tactical shooter and gunsmith Jim See of Elite Accuracy LLC recently tested a Frankford Arsenal rotary brass tumbler. Like the older Thumbler’s Tumblers, this can tumble your cases in a liquid solution. The wet-tumbling process worked very well Jim reports. Posting on Facebook, Jim noted: “I was super impressed with the Frankford Arsenal rotary tumbler and cleaning packs they sent me. I ran 350 pieces of brass for one hour. They now look great.” Jim appreciated not having to deal with dry tumbling media, such as crushed walnut shells. Dry media produces dust and can leave residues or clog flash-holes.
Interestingly, Jim recommends you try wet-tumbling WITHOUT using stainless media. At least give it a try. Tumbling without media simplifies the process and you don’t have to worry about pins stuck in flash-holes or case-necks*. Jim reports: “Stainless steel pins come with the Frankford kit, but mine hit the trash right out of the box. There is no need to clean the inside of your cases 100% and that’s all the pins add to the equation. The brass bumping brass with hot water and Frankford’s liquid cleaner works great all by itself.” One wag stated: “That’s great to hear. Stainless steel pins are a PITA.”
Other Facebook posters concurred with Jim’s evaluation of the Frankford Arsenal Rotary Tumbler:
“I’ve had one for a couple years, and it works well. I usually run about 250-300 Dasher cases at once in it. But I use the pins because I’m OCD about clean brass.” — David W.
“I’ve had one for a year and a half and it definitely works with or without pins.” — Luke C.
“I got one about six months ago and have yet to use any SS media. I just use some dawn, distilled water, and Lemi Shine®. Turns nasty 5.56 range brass bright and shiny.” — Brian D.
“I don’t use the pins either and use a combination of Dawn soap and Lemi Shine.” — Jon N.G.
This video shows how to assemble and operate the Frankford rotary tumbler. But note, Jim See does NOT feel that it is necessary to use stainless media.
How to Dry Your Brass — Hair Dryer Vs. Machine
The downside of wet tumbling is that you end up with a pile of wet brass at the end of the cleaning cycle. There are many ways to dry brass, from drying in the sun to using a kitchen oven (be careful not to “overcook” your brass). One Facebook poster asked Jim: “What is your drying method for wet brass, and how long does it take?”
Jim See replied: “To start I just drain off the dirty water, and rinse the brass with clean hot water. Then I roll the brass on a towel for 30 seconds and put the brass in a one-gallon bucket. Next I insert a hair dryer in the bucket (with the brass) and let it run for about 5 minutes. With this procedure, the drying process for me is done in less than 10 minutes.”
Jack Lanhart has another method: “I use a food dehydrator. It takes 30 to 45 minutes.”
For those who don’t want to mess with towels and hair dryers, Frankford Arsenal offers a matching Platinum Series Case Dryer that simplifies the process of drying brass. Lyman also makes an excellent Cyclone Case Dryer. These drying machines each cost about $65.00 and both have multiple levels so you can separate different types of cartridge brass. Lyman states that “The forced heated air circulation of the Cyclone will dry your brass inside and out within an hour or two, with no unsightly water spots.” The Lyman dryer can also be used for ultrasonically-cleaned gun parts.
*The Frankford Rotary tumbler does include media separators if you choose to use the provided pins or other media. CLICK HERE for diagram showing how to use media separators.
Are you getting ready for that Fall 2021 hunt? Would you like a FREE Special Hunting Edition of On Target Magazine? Just CLICK HERE to read the latest 85-page magazine in digital PDF format. This issue features New-for-2021 Hunting Gear, plus a round-up of new Suppressor-Ready LR Hunting Rifles:
Mossberg Patriot Long Range Hunter
Springfield 2020 Waypoint
Savage Impulse Predator
Sig Sauer Cross
In addition, two other interesting new hunting rifles are reviewed: Brenton 450 Bushmaster Stalker Carbon Hunter 18, and Rossi R92 Lever Rifle.
Here’s a clever little device from Creedmoor Sports. This $14.95 PUCK lets you run multiple cleaning/uniforming attachments with one easy to use center disk. Store the attachments on the outer diameter and transfer to the threaded center section as desired. This is a clever invention that could work great in your range kit.
Attached Tools Are NOT Included
But before we go any further, TAKE NOTE — the $14.95 only gets you the threaded central Puck disk. ALL the other attachments are sold separately — you have to pay MORE Money — got that? Most people already have inside/outside chamferers and primer pocket uniformers, so the Puck should work well. It fits all 8-32 threaded tools, which includes 95% of most case prep tools.
The Puck — Universal Brass Case Prep Tool Holder
Product Description from Creedmoor Sports
Attach up to four case prep tools threaded 8-32 (95% of case prep tools on the market). The Puck encourages a light touch and is more ergonomic to use than most hand tools on the market today.
Quickly rotate the tool to progressively work through your case prep. Set it up with an outside deburrer, inside deburrer, primer pocket cleaner, and crimp cutter. You can easily rotate through the tools.
A handy tool for the range bag, pair the Creedmoor Puck with any brush or pull cord with an 8-32 thread. Use for detailed brushing or use the Puck as a puller. Thread on picks for scraping off carbon or getting dirt out of tight spaces.
The Creedmoor Puck is made from 416 Stainless Steel. This is both corrosion resistant and magnetic. Use a magnet to stick a Puck the side of your reloading press to easily store your prep tools and keep them at your fingertips for quick touch-ups while loading. The diamond knurling makes this tool easy to grip while in use. The patent-pending Puck tool is designed for heavy use and should last a lifetime.
The National Rifle League (NRL) started off sponsoring major centerfire tactical matches, similar to PRS competitions. That proved successful so the NRL added a .22 LR Rimfire series, called NRL22. The NRL22 rimfire discipline has been a major success, as rimfire guns are fun to shoot and ammo is very affordable. The most popular NRL22 matches have drawn up to 200 rimfire competitors. And now there is a companion rimfire long-range series, NRL22X. Learn more about NRL22 and NRL22X at NRL22.org.
NRL22 is a great way to get into competition shooting with minimal expense. There are five (5) classes: Open, Base, Ladies, Young Guns (8-16) and Air Rifle. Base Class is for the budget-minded shooter — the combined MSRP of Rifle and Optic may not exceed $1200.00 (so you could spend $700 on a rifle and $500 on a scope for example). That keeps the sport affordable. Open, Youth, and Ladies Classes have no price limits on Rifle and Optic. Visit NRL22.org to find an NRL22 match near you.
The NRL also sponsors NRL22X matches. These involve significantly longer distances for greater challenge. The latest NRL22X match is the XLR Rimfire Rumble, to be held in Grand Junction, Colorado this Saturday, September 18, 2021.
The two videos above from Long Range Shooters of Utah feature footage from the January 2019 course of fire from the NRL22 Rimfire Competition Series. Note the snow-capped hills in the lower video. Useful commentary explains how competitors establish their shooting positions.
How to Participate in NRL22 and/or NRL22X
If you want to get started in NRL22 or NRL22X competition, you’ll need an NRL22 annual membership. These run from $25-$85 depending on class and discipline. CLICK HERE for annual membership information.
NRL22 Membership Benefits Include:
– Eligibility to participate in all NRL22 matches
– Eligibility to participate in all NRL22X matches
– Welcome gift (not all welcome gifts are the same)
– Scoring and Ranking for all events
– Newsletters and updates
– Eligibility for special NRL22 raffles and giveaways
– Access to special NRL discounts from participating sponsors
NRL22 Publishes Monthly Courses of Fire
This video from a Utah NRL22 Match features shooters from each of the four rimfire classes. With the NRL22 program, scores from from local matches like this are ranked against scores from other matches nationwide. In advance of match dates, NRL22.org publishes 5 courses of fire to be used in that month. Each course of fire will always include 2 prone stages, 1 positional, 1 barricade, and a fifth that can be any of those. Details of the course of fire, including target distances, target sizes, time limits, and barricade profiles, are listed at NRL22.org.
Official NRL22 Rimfire Steel Target Package
To facilitate consistent NRL22 match scoring, there is an official NRL22 Rimfire Steel Target Kit. Crafted by JC Steel Targets from AR500 steel, this kit from JC Steel Targets includes 8 hanging targets, 4 KYL (Know Your Limits) targets, plus all needed hangers. That’s lot of steel and hardware for $394.99. There is also an official 2020/2021 Expansion Target Package with 5 more hanging targets for $79.95.
About NRL22 Tactical/Practical Competition The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
Today’s precision shooter is connected. He or she is likely to bring a number of electronic items to the range, such as a smartphone, tablet computer, Kestrel, LabRadar chronograph, and more. These digital devices all require electricity to operate. Unfortunately, most ranges don’t include convenient charging stations for your gadgets. Therefore you need to bring battery back-up. Here are three good options, with storage capacities from 10200 mAh to 42000 mAh. The first unit is fully weather-proof, so it is good for hunters and tactical shooters exposed to the elements. The largest power pack, with AC outlet, is quite versatile and works well on car-camping trips.
1. FosPower 10200 mAh Waterproof Charger, $29.99
When you’re at the range or on a hunt, it’s smart to have a USB-output battery pack for smart phone, target-cam monitor, even a LabRadar. There are many battery packs available, but most are fairly fragile, with exposed ports. This “ruggedized” FosPower 10200 mAh charger is different. It is waterproof, dust-proof, and shock-proof. (IP67 certified: dust and water resistance for up to 3ft/1m for 30 minutes under water.) It can handle all that a PRS competitor or hunter can dish out. It even has a handy LED light. Right now it’s priced at $29.99 with FREE Shipping for Prime members.
2. EasyAcc 20000 mAh Battery Pack with Fast Charging, $42.99
If you want to charge multiple devices, such as a tablet and a LabRadar, you need serious capacity. The EasyAcc 20000 mAh battery pack can charge up to four devices simultaneously. Notably, this $42.99 Battery Pack charges faster than most other 20K packs. It has two power input ports, allowing it to fully charge in 6-7 hours. (We have another 20000 mAh battery unit that takes over 16 hours to fully charge!). This unit will charge an iPhone 7 six times, a Samsung S8 four times or an iPad Mini two times. Note, 78% of Amazon purchasers rated this unit Five Stars (with 13% Four-Star reviews).
3. Jackery 240Wh USB, 110v AC, 12v DC Power Station, $199.99
Many folks have asked us “How can I use a laptop, chronograph, or electronic powder dispenser that requires 110 volt AC power when I’m at the range?” Sure you can take power from your car’s 12 volt cigarette lighter jack, but you’ll still need a very long cable and a 12 volt to 110 volt step-up transformer. If you run a cable from the parking lot to the bench or shooting bay you’ll have to leave a window open in your vehicle and fellow shooters can trip over the long cord.
A better solution is to get a portable, combo USB + 110 volt + 12 volt power unit. This versatile 240Wh Jackery Power Station will drive a 110v device, 12v units, PLUS charge a USB tablet and cellphone, all at the same time. You can run a LabRadar for DAYS with this advanced Lithium Ion power-pack. It will also power CPAP machines and other 12v devices. One nice feature is rapid charging. Before your range session or camping trip, plug this into the wall. It will get fully charged in about 3.5 hours from a 110v outlet. Also this unit can recharge from a paired Jackery solar panel ($179.99 sold separately, see below). By itself (without solar panel) the Jackery portable power source is $199.99 on Amazon. See Jackery Product Store.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. Sportsman’s Warehouse — $50 Off Ruger American Rifles
⏺ $50 Off Ruger hunting rifles — wide variety of styles and chamberings
All Ruger American rifles are $50 OFF this week at Sportsman’s Warehouse. These Ruger rifles can often shoot MOA or better with factory ammo — making them more than adequate for deer hunting. A wide selection of Ruger American rifles are ON SALE including Predator, Hunter, Compact, Ranch Rifle, and Go Wild Camo models. Most include a Picatinny scope rail. There is a huge choice of chamberings: .22-250, .243 Win, 6.5 Grendel, 6.5 Creedmoor, .270 Win, 7mm-08, .308 Win, .30-06, .300 WSM, .350 Legend and others. If you need a new hunting rifle check out this Ruger sale.
2. Midsouth — Rock Chucker Supreme Reloading Kit, $399.99
⏺ Kit includes press, powder measure, scale, manual and many tools
Everything you see above can be yours for just $399.99. Right now, Midsouth is selling the Rock Chucker Supreme Master Reloading Kit for $399.99, a fine price considering all the hardware you get: Press, Primer Tool, Scale, Powder Measure, Loading Tray, Reloading Manual and more. This is good starter kit for any reloader, with sturdy items (such as the Rock Chucker press), that will last a lifetime.
3. Midsouth — Lee Breech-Lock Hand Press, $47.66
⏺ Great value — versatile press, good for bullet seating at range
A good hand press is worth having. Whether seating bullets at the range or doing repetitive tasks at home while watching TV, a hand press can be very useful. One very affordable choice is the Lee Breech-Lock Hand Press. With its breech lock system, you can quickly and easily swap dies. And you can efficiently deprime fired brass with this tool’s built-in primer catcher. Here’s a video from F-Class John showing how you can use the hand press for bullet seating.
4. Midsouth — Match Monster .30 Cal bullets, 500ct $149.99
⏺ Under $30 per hundred for very good .308 168gr BTHP bullets
With current shortages, it’s been hard to find decent .30-caliber target bullets at a reasonable price. Here’s a good deal for you — Midsouth has Match Monster .30 Cal 168gr BTHP Bullets on Sale. Get a 500-ct box for only $149.99. That’s just $29.98 per hundred! These are “match quality” bullets so you can practice effectively with your .308 Win or .30-06 without breaking the bank.
5. Sportsman’s WHSE — Razor HD 20-60x85mm Spotter, $799.99
⏺ Very good spotter for the price with outstanding warranty
Vortex has updated its top-of-the-line Razor HD spotting scope, changing from an small-knob focus system to a single large focus ring. Now get the previous model Vortex Razor HD 20-60x85mm Spotting Scope at a huge discount. The $799.99 sale price is $800 less than the current 27-60x85mm Razor HD ($1599.00 on Amazon) — that’s HALF the price! This two-tone $799.99 spotter features premium High Definition (HD) glass for excellent sharpness/resolution with minimal chromatic aberration (color fringing). Exterior lenses are protected by ArmorTek – a scratch-resistant compound that repels oil, dirt, and fingerprints. Verified purchaser reviews have been very positive: “Great spotting scope at a great price”.
6. Graf & Sons — Cutting Edge Monolithic Bullets
⏺ Superb solid copper bullets favored by top ELR competitors
Here is a great bullet option for ELR shooters, and hunters who are required to use lead-free projectiles. Grafs.com has the excellent Cutting Edge Bullets on sale now. These are lathe-turned, solid copper precision bullets. Cutting Edge Bullets feature a patented SealTite™ band (slightly larger than caliber diameter) which can help reduce gas blow-by and reduce copper fouling. IMPORTANT: These Cutting Edge Bullets are LEAD FREE so can be used in areas like California which ban hunting with bullets that contain lead. Please note that inventory is very limited for some bullet calibers/weights, so you should act soon.
⏺ Good rings are easy to adjust — custom wrench is handy
If you have dies from various die-makers, you probably have many different types of die lock rings, and some are annoying to adjust. Some of them are too small to grip and others lock in a way that can damage threads. You can standardize your rings with McJ Tools Reloading Ultimate Lock Ring set. Each pack comes with six (6) rings, a tailored steel wrench, a Hex key, and two (2) extra set screws so you’ll have everything you need. This system allows you to set your dies up and then tighten them down or easily remove them with the custom wrench without losing your setting.
⏺ Smart new Die System simplifies loading multiple cartridge types
Are you tired of buying another expensive seating die every time you try a new cartridge type? With the unique Frankford Arsenal Universal Bullet Seating Die you can have one die that loads multiple cartridge types. This clever bullet seating system includes 3 different stems and 9 sleeves allowing you to seat .224 to .338-caliber bullets with this one multi-caliber tool. Forum members using this system have praised it. NOTE: the universal seating die comes with the .308-caliber sleeve pre-installed. The other 8 sleeves are provided in the box.
9. MidwayUSA — Real Avid AR-15 Cleaning Kit with Mat, $31.99
⏺ Great accessory for AR15s, cleaning kit and mat with diagrams
We can recommend the Real Avid AR-15 Cleaning Kit/Smart Mat for all AR owners. This includes a large, padded, oil-resistant mat with printed AR parts diagrams and a built-in parts tray. The tool kit, in zippered pouch, has key tools needed to disassemble and clean your AR. The kit also includes the Real Avid Field Guide. At $31.99, this combo set costs less than the Real Avid Cleaning Kit by itself.
10. Amazon — Gun Swabs and Patch Combo, $14.49
⏺ Handy Combo Pack — 600 patches for barrels and 400 swabs
Cleaning patches are a necessity in our sport, and swabs can be very useful. Swabs can clean out the gunk from deep inside your actions and efficiently place lube in tight places. Amazon currently offers a great combo kit with 600 Gun Patches and 400 6″ Gun Swabs. This kit will help you clean barrels and actions.
Key Benefits of this system
Thomas Air Rifle with Metal Stock
Custom .22-Caliber Slugs
The goal of NRL 22 is to make Precision Rifle competitions more available to every community. However, nearly all localities have access to 100-yard ranges and most shooters own a .22 LR rifle. The NRL22 program is designed so any facility with a 100-yard range can host matches. Participants at local NRL22 events can then attend a National Championship. NRL22 started with four classifications: Open, Base, Ladies, and Young Guns (8-18 age). Air Rifle is the new fifth class. For the 2018/2019 Competition Season, over 700 shooters attended NRL22 matches. In the 2019/2020 Competition Season, the NRL22 expects significant growth and is excited to welcome new members and clubs.
