Looking to shoot an AR-platform rifle out past 500 yards? Then you should read two articles by AR guru Glen Zediker. Author of The New Competitive AR-15 and The Competitive AR15 Builders Guide, Zediker is an expert when it comes to AR-platform rifles. Glen believes ARs have excellent long-range capability, provided they are built to high standards, with good barrels.
Glen says: “a properly configured AR-15 is easily capable of good performance at 500+ yards. Good performance means it can hit a 1-foot-square target all the time. Competitive shooters can cut that standard in nearly half (the X-Ring on an MR1 600-yard NRA High Power Rifle target is 6 inches, and high X-counts are commonplace among more skilled shooters).”
Published in the Cheaper than Dirt Shooter’s Log, Zediker’s articles first cover the history of the AR-15, and then explain how AR-platform accuracy can be optimized. Part One reviews the AR’s development as an accurate firearm, tracing its evolution from a Vietnam-era combat weapon to what is now a favored target rifle of High Power competitors. READ PART ONE.
Part Two discusses the specifics that make an AR accurate at 500 yards and beyond. Zediker talks about barrel configuration (profile and twist rate), bullet selection, floating handguards, and proper mounting of optics or iron sights. READ PART TWO.
Barrel Twist Rate
To stabilize anything longer than a 68- or 69-grain bullet, the barrel twist rate must be — at minimum– 1-in-8. Twist rates reflect how far the bullet travels along the lands or rifling to make one complete revolution. So, 1-in-8 (or 1-8, 1:8) means “one turn in eight inches.” I think it’s better to go a little faster in twist. There is nothing wrong with a 1:7 twist. The 90-grain bullets require a 1:6.5, and that is getting on the quick side. If you want to shoot Sierra 77s or equivalent, and certainly anything longer, 1:8 is necessary. By the way, it is bullet length, not weight, which constitutes the necessary twist rate to launch a stable bullet.
Optics Mounting
Correct optical sight positioning can be a challenge. With a flattop upper, I need a good inch additional forward extension at the muzzle side of the upper for the sight mount bases to avoid holding my head “back” to get the optimal view through the scope. A longer rail piece is necessary for my builds as a result.
Buttstock Length and Adjustment
An adjustable buttstock is valuable, and even more valuable if it’s well-designed. Mostly, a standard stock is too short, and the cheek area sits too low. Adding length helps a lot by itself. There are assemblies that replace the standard buttplate to allow for length and, usually, height and rotation adjustments for the buttpad. An elevation-adjustable cheekpiece is a big help to attain a solid position.
Couldn’t make it to Las Vegas this year for SHOT Show 2020? Well thankfully there is extensive SHOT Show coverage on the internet — both on websites and on the YouTube platform. GetZone.com, a large gun industry media resource, has provided 24 video reports on new products — rifles, pistols, shotguns, optics, and accessories. The 2-3-minute product showcase videos include both booth coverage from the SHOT Show floor and product-in-action footage from Industry Day at the Range.
GetZone’s What’s Hot at SHOT 2020 features Ruger as title sponsor for the third straight year, in addition to the following sponsors:
GetZone.com has grown into one of the largest video platforms for hunting, firearms, and shooting sports content. With YouTube and Facebook aggressively censoring Gun-related content, we are pleased to see GetZone.com providing a gun-friendly new media platform serving all shooting disciplines. GetZone.com states that it “promotes safe shooting, encourages responsible firearms ownership, and supports wildlife conservation across the globe.”
Redding has a new tool that can make it easier to measure case neck and bullet run-out. Redding’s new Slant Bed Concentricity Gauge features a tilted, 4-point case support. The “Slant Bed” design moves the bearing surface down and away from the user, making case rotation easier. Redding explains: “Pushing down with the index finger is a natural movement as opposed to rolling on a flat which requires the movement of the entire arm. It improves both the ease of case rotation and the maintenance of proper alignment for reading.”
The orientation of the Dial Indicator also improves ergonomics. The fixed vertical indicator stand places the indicator face at the optimal sight angle of 30°, reducing the possibility of off-center readings. Precision stainless steel bearings provide single-point contact with the cartridge case. Bearing sliders on stainles guideways allow quick and easy linear adjustment for cartridge length.
Redding’s new Slant Bed tool is affordable — $124.19 with 1″ Dial Indicator. The tool ships set-up for right-handers, but quickly converts for left-hand use.
- Ergonomic Design — Ships complete with large 1″x.001″ dial indicator
– Fixed indicator position — Dliminates set-up errors
– Precision stainless steel bearings mounted on linear guideways accept cartridge sizes from .17 Hornet to .408 CheyTac.
– Supplied with non-skid rubber feet or use direct mounting holes
– Easily converted to left-hand arrangement
Redding Product Description:
The new Slant Bed Concentricity Gauge features a large, easy-to-read dial indicator which quickly mounts in a factory aligned base dead-on the centerline of the case. No additional indicator alignment is needed. The uniquely angled design of the slant bed also better positions the dial indicator for easier reading as opposed to older designs. Additionally, the Gauge can be transitioned from right-handed use to left-handed by using a provided set of mounting holes on the base. Simply remove the mount screws and transfer the working sections from one end to the other. Left-handed users no longer need to struggle to get accurate readings.
At SHOT Show and Media Day at the range, hundreds of new pistols were on display. We were pleased to see a variety of new .22 LR rimfire choices. For training, fun plinking, and target work, a .22 LR pistol offers many advantages. First, the ammo is inexpensive — you can get decent ammo for under $3.00 a box these days. In addition, barrel life is excellent with the little .22 LR cartridge. Finally, .22 LR has very low recoil, and less noise than centerfire cartridges — though you should still always wear eye and ear protection when shooting rimfire handguns.
Here are five new-for-2020 .22 LR Handguns from Browning, Ruger, Keltec, and Glock. Though it appears to have some reliability issues, we included the new Glock 44, because many of our Forum members asked about this new handgun.
Browning Buck Mark Limited Edition Buck Mark Plus Vision
This is a new Limited Edition of Browning’s classic Buck Mark semi-auto rimfire pistol. This features a ported barrel shroud. Along with the blue version shown, this new pistol is offered with a Red or Black finish. This Editor shot this Buck Mark Plus Vision Ltd. Edition on Range Day and were impressed. It balances well, has a great trigger, and was very accurate. See Full Review on GunsAmerica.com. With lots of close-up photos, the GunsAmerica Digest review provides very complete information on the Limited Edition Series Plus Vision Buck Mark.
Ruger Mark IV .22 LR with 10″ Barrel
This new Ruger Mark IV has a serious sight radius — the 10-inch barrel is near twice the length of the Mark IV’s typical 5.5-inch barrel. Even Ruger’s Mark IV Hunter and Competition models only offer a 6.88″ barrel. These new 10″-barrel guns still use the standard Mark IV one-button takedown for quick and easy field-stripping. The upper receiver comes drilled and tapped to mount Weaver- or Picatinny-style rails for optics. These new long-barrel Mark IVs will be available soon from Guns.com.
Ruger Lite Rack LCP II .22 LR Pistol
For SHOT Show 2020, Ruger introduced a new ultra-compact .22 LR pistol, the LCP II “Lite Rack”. This rimfire version of Ruger’s popular .380 ACP pocket pistol gets its name from the easy-to-charge slide. Initial testing shows this little rimfire has a decent trigger and good accuracy. With a 10+1 capacity, the Lite Rack .22 is very reliable, as you can see in this .22 Plinkster video. If you’re interested in a “Deep Cover” .22 LR carry pistol, the Lite Rack LCP II, with its $319.99 street price, may fit the bill.
Keltec P17 — Compact, Budget-Priced .22 LR Pistol
Keltec’s new P17 rimfire pistol is lightweight, easy to handle, and features a fiber optic front sight and an adjustable rear. Priced at just $199.95 MSRP, the .22 LR P17 has 16+1 round capacity and ships with three, 16-round magazines. This is a small pistol — it weight just 14 ounces and OAL is 6.65″. Keltec states: “The new, affordable P17 pistol makes range days a lot less expensive and far more fun.” With low cost .22 LR ammo and a 16+1 capacity, this should be fun to shoot.
Glock 44 — Glock’s First-Ever .22 LR Handgun
Glock surprised the world with its new Glock 44, with a form factor similar to the Glock 19. Glock’s first rimfire handgun has a 4.02″ barrel and 7.28″ OAL so most G19 holsters will work with the G44. There is minimal muzzle flip, accuracy is good, and the trigger is decent. OK, that’s the good stuff. The negatives? There have been reliability issues with bulk-type, inexpensive .22 LR ammunition. Reviewer .22 Plinkster was disappointed with his G44. He had dozens of malfunctions with bulk .22 LR ammo (see 9:00 time-mark) and the gun shot high with normal sight alignment (9:20 time-mark). He says the new G44 needs further development: “I… had high hopes for the Glock 44 when it was released. Hopefully, Glock will remedy some of the issues with this handgun.” And in the Pew-Pew Tactical video below you’ll see a malfunction at 6:50. The reviewer stated: “I struggled with the rounds that were cheaper and lighter, but I didn’t struggle with hot stuff or the good stuff.” Lesson — if you are considering the G44, be sure to use quality, hotter .22 LR ammo such as CCI Mini-Mags.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
1. MidwayUSA Padded Shooting Mat, $74.99 on Sale
This padded MidwayUSA mat is much more comfortable than typical shooting mats. With 1.5″-thick high-density foam, this is way better for knees and elbows than typical roll-up mats. For your home range, this is a good choice. On sale now for $74.99, this thick mat folds into three sections. It stows flat and fits nicely in the back of a truck or SUV. Actual owner comments: “If you like to be COMFORTABLE … I can highly recommend it! Easy on the elbows. Easy on the knees. Easy on the belly. You can even kneel on it comfortably, even when the surface is rock-hard!”; “I tell you what … Do yourself a favor and spend the few extra dollars on this unit. Highly recommended.” MORE REVIEWS HERE.
2. EuroOptic — Leica 8×42 Geovid LRF Binoculars, $1150 Off
If you’re looking for outstanding glass plus great rangefinding capabilities, the Leica Geovids are among the best you can buy — at any price. Right now save over $1000 on the Leica 8×42 HD-B 3000 Geovids at EuroOptic. These are being marked down to $1799.00 because Leica has introduced a new “smart” Geovid 3200.com model that communicates with a Ballistic App. That new 8×42 Geovid 3200.com starts at $2949.00, so you can save big bucks by buying the previous model. Last year’s 10×42 Geovid is also on sale now for $2499.00.
3. Natchez — ChargeMaster Lite Powder Dispenser, $209.99
Precise powder dispensing is critical for accurate loads. Among the many electronic scale/dispensers on the market, RCBS’s ChargeMaster Lite is a very good choice. This week Natchez is selling the ChargeMaster Lite for only $209.99. That’s a great price — almost $60 cheaper than Amazon. Note: Natchez also offers $5 Shipping with $99+ orders through 2/4/2020 with Code FR200201.
4. Multiple Vendors — 20% Rebate on Federal and Speer Bullets
Now through the end of April, if you purchase at least $100 worth of Federal and/or Speer bullets you can get 20% of the purchase price back. Minimum purchase is $100.00. Maximum rebate of $100 per person or household. Note: The Rebate amount will be calculated on the product purchase price only — that does NOT include taxes and/or shipping/handling fees. This Federal/Speer Rebate is valid for purchases made 02/01/2020 through 04/30/2020. View REBATE FORM.
5. Midsouth — Frankford Arsenal Rotary Tumbler Lite, $99.99
Lots of people love wet-tumbling their brass in stainless pins but not everyone want to do it in a giant unit. We found a sweet deal on the Frankford Arsenal Rotary Tumbler Lite. Midsouth has this unit on sale for $99.99. This tumbler is small enough to fit on a counter but still big enough to hold 300 pieces of .223 Rem brass. For folks on a limited budget who want to start wet tumbling, this is a solid choice.
6. CDNN — Ruger American .30-06 Hunting Rifle, $319.99
Even with so many new cartridge types, the venerable .30-06 Springfield remains a trusted and effective hunting round. Moreover, you can find good .30-06 hunting ammo at most any sporting goods store. Whether you’re looking for an affordable hunting rifle or perhaps a first rifle for a family member, check out this .30-06 Ruger American Rifle with Wolf Camo finish. CDNN’s current sale price is just $319.99 — a great bargain. One recent comparison test declared the Ruger American the best entry-level hunting rifle, and Ruger offers a rock-solid warranty.
7. Sportsman’s Guide — Buck Mark Camper UFX Pistol, $299.99
The Browning Buck Mark is a classic, and for good reason. These pistols are reliable, well-balanced, have a good trigger, and they are very accurate. And now you can get one for under $300.00. Sportsman’s Guide has the Browning Buck Mark Camper UFX with 5.5″ Barrel on sale for $299.99 ($284.99 member price). This Buckmark Camper UFX is a excellent value, especially for Club members who pay just $284.99.
8. MidwayUSA Dogtown Ammo, $21.25 for 50 rounds
Dogtown Ammo, made with Nosler tipped FB bullets, offers great “bang for the buck” for .223 Rem shooters, particularly high-volume varminters. Right now get 50 rounds for just $21.24 (43¢/rd). Or order 200 rounds for $86.99 (42¢/rd). Forum member NDAE15MAN states: “This stuff shoots in all of my .223 Rem guns — 7/8″ to 1″ at 100 yards. Best kept secret for ammo. Shoot exact same groups as Black Hills.” NOTE: MidwayUSA also sells .204 Ruger Dogtown Ammo with 32gr tipped flat-base bullets.
Here’s a great deal for varmint shooters with 17 HMR rifles. Midsouth has the Hornady 17 HMR brick of 500 for a low price of $89.99. That works out to just 18 cents per round — cheap enough that you can blast sage rats all days long and never worry about running out of ammo.
10. Amazon — Two Pairs Safety Eyewear, Cords, Covers, $13.50
Eye protection is important! All you need is one case separation or blown primer to cause serious eye injury. Don’t take that risk. Plus the CMP has made Eye Protection mandatory for all CMP Pistol and Centerfire Rifle events. Here’s a great kit with TWO Sets of safety eyewear, each with a neck strap and carry bag. These feature ANSI Z87.1-rated lenses that are anti-fog and scratch-resistant. The lenses also block harmful UV rays. Get the full SuperLite and SuperClear Lens Technology Kit for just $13.50.
With the Berger Southwest Nationals (SWN) taking place this week in Phoenix, we are reprising this discussing of rear bag designs and fill levels. By “tuning” your rear bag you can reduce hop on shot-firing and help your rifle track better. All that can translate to better scores, particularly with large-caliber rifles.
Tuning Your Rear Sand Bags
Over the years, noted gunsmith and a Benchrest Hall-of-Fame inductee Thomas ‘Speedy’ Gonzalez has learned a few things about “tuning” rear sandbags for best performance. On his Facebook page, Speedy recently discussed how sand bag fill levels (hard vs. soft) can affect accuracy. Speedy says you don’t want to have both your front and rear sandbags filled up ultra-hard. One or the other bag needs to have some “give” to provide a shock-absorbing function (and prevent stock jump). And you want to tune your fill arrangements to match your shooting style. Free recoil shooters may need a different fill levels than bag squeezers (who a softer bag but harder ears).
SAND BAGS & HOW TO FILL THEMby Speedy Gonzalez
I was asked several times by competitors at the S.O.A. Matches and F-Class Nationals as to how I fill my sand bags for benchrest competition. Here is a copy of a reply I gave several years ago:
Back in the old days, Pat McMillan told me: “You can not have two bags filled so hard that you gun bounces on them in the process of firing round at your target, especially if you have a rig with a very flexible stock. The bags must be set up in a manner for them to absorb the initial shock of the firing pin moving forward and igniting the primer.
Then [they must] maintain their shape and absorb the second shock wave as well the rearward thrust and torque of the rifle. What happens to the rifle when this is not done? Well let me tell you. The rifles have a very bad tendency to jump and roll in the bags. This causes many of those wild, lost shots that one can’t explain.”
Here’s some Good General Advice for Bag Set-up:
1. You should not have TWO hard bags [i.e. both front AND rear] in your set-up.
2. Heavy sand magnifies these phenomena.
3. If you are a bag squeezer, pack ears hard and leave bag pliable enough to squeeze for the movement required. You may pack front bag as hard as rules permit.
4. Free recoil shooters pack both bags firm, but not so hard as to allow stock jump. Especially if you have a stock with a very flexible forearm.
5. We use play-ground sand, also know as silica sand. I sift mine to get any large impurities out then mix it with 25% to 50% with Harts parakeet gravel to the desired hardness that I am looking for. The bird gravel keeps the sand from packing itself into that solid as a brick state.
Speaking of bricks — another thing that happens when shooters employ that heavy zircon sand is the ears form a low spot under them from recoil and then tend to rock back and forth with the rifle causing many low shots to crop up. Edgewood makes an Edgewood/Speedy rear bag specially reinforced under the ears to eliminate this scenario.
General Thoughts about Bag Construction and Ear Materials
I do not like the solid double-stitched leather bottoms. While this seems like a good idea, I see more shooters have problems because of them. They tend to slide around the bench and or slide with the rifle on recoil. The standard Protektor with Cordura rabbit ears and an Otto ring bag with a Cordura front would be what I would suggest to the new shooter or one of the Edgewood / Speedy rear bags, these mimic the “Donut” and feature a ring of leather around the bottom circumference that keep the bottom from rocking on the bench or ground[.]
One last note –If you use the Cordura bags, keep them sprayed with a good silicon spray or “Rain-Ex”. This keeps them from getting sticky. — Speedy
With the Berger Southwest Nationals commencing this week, we thought our readers would appreciate a showcase of two impressive, state-of-the-art F-Open match rifles. The first, show above, is the .284 RAHM (40° .284 Win Imp) with which Brian Bowling captured the 2019 F-Class Open Division Long Range National Championship. The second rifle belongs to barrel-maker Bryan Blake. Like Bowling’s rifle, Blake’s rig features a low-profile Cerus stock, but with purple highlights. Both rifles have 6-groove, cut-rifled barrels from Blake Barrel & Rifle and both sport Nightforce scopes.
Twin World-Class F-Open Rifles
Report from Bryan Blake of Blake Barrel & Rifle
We had been producing gun barrels for about 1.5 years prior to the 2019 NRA Long Range F-Class Nationals. Brian Bowling started shooting our 7mm barrels in May of 2019. Bowling and I are both on the Rutland team, Team Cerus, which has seven members. Bowling and I received the first Cerus XL stocks from Cerus Rifleworks in August of 2018. The stock was a very straight design.
With our barrels, these F-Open rigs can shoot! In 2018, Brian Bowling and I had the only two clean scores for the first match at the 1000-yard team NRA Nationals. In spring of 2019, I worked with Will of Cerus Rifleworks to see if we could come up with a lower center of gravity design to enhance what was already the straightest stock out there. We developed the Cerus XR stock which features stepped metal rails on the fore-end. I cut my XL Cerus stock and designed the rail system attached to the sides of the fore-end. Bowling’s stock (with black rails) was the second XR in the shooting world. On his very first weekend match at 600 yards he shot a 200-20X with the new XR stock and Blake 7mm 1:8.5″-twist barrel. He was using Berger 184gr 7mm bullets.
In 2019, at the NRA F-Class Long-Range Nationals, Brian Bowling won the F-Open National Championsship with a strong performance. He finished with a ton of Xs, three points ahead of the second place competitor. Before Brian’s impressive victory, we were told by many top shooters that a 6-groove barrel has never won any F-Class Mational event, and hypothetically never would. Well with Brian Bowling’s excellent shooting and reloading capabilities, we achieved a feat many said couldn’t be done.
Bowling’s Championship-winning rifle features a Bat Model B action in the Cerus XR stock. His Blake barrel is chambered for the .284 RAHM wildcat cartridge. This is a 40-degree (40°) version of the .284 Winchester. The .284 RAHM has a straighter case body compared to the original .284 Win.
We built Bowling’s rifle, doing everything except the final clear finish. We can do that work, but were short on time for the Nationals last year. We are proud of the chambering work we do and the quality of our bedding jobs.
Bryan Blake’s F-Open Rifle — the Purple XR
The Purple XR-stocked gun I shoot was built in August of 2019, right before the 2019 NRA F-Class Nationals. The natural wood is complimented by highlights finished with a bright purple metallic epoxy resin that Will from Cerus dreamed up. For this rifle we mated a BAT 3LL action with Blake barrels (switch-barrel configuration). Up front the fore-end rails are painted purple “plum crazy” to match the purple resin. The purple XR is finished with automotive “high solids” clear-coat, and block-sanded for a smooth, flawless look.
Blake’s Rifle is a Switch Barrel — 7mm and .30 Caliber
This Purple XR was set up to be a switch barrel rig, with both a 7mm BBM and a .30 BBM*. These BBM wildcats are based on shortened and straightened .300 WSM with a 40-degree shoulder. On my purple XR rifle as well as Bowling’s rifle, we employ Nightforce optics and load Berger bullets. These are the only glass and projectiles we use in our rifles.
The Purple XR is extremely accurate. Check out this 2.6″ group, shot at 1000 yards during a club match at the Ben Avery Range in Arizona. Yes, that is 1/4-MOA at 1K! Many folks would be very happy with that group at 600 yards. At 1000 yards it is remarkable. No, the rifle can’t do that every time. But this does demonstrate that the Purple XR is a tack-driver. CLICK HERE to see a 3.9 inch, 15-shot group at 1000 yards on the F-Class target (150-15X).
About Blake Barrel and Rifle — History and Barrel-Making Process
Blake Barrel and Rifle was re-launched in 2018. The business was actually started by my grandfather, Robert Blake, in 1966. In 1969 my grandfather stopped doing gunsmithing and making single-point cut-rifled barrels. He transitioned to doing industrial work, and less work for the public. After all those years he and my father, Dave Blake, kept the barrel-making equipment in storage. They kept the gun-drilling machines in the shop as they used them to drill long, deep holes in anything from aircraft parts to electric motor rotors.
In 2012 we got the diamond single-point, sine-bar rifling machine out of storage, along with the Pratt and Whitney double-spindle reaming machine. We then completely rebuilt and updated the equipment. We modified the gun-drill to be a counter-rotating drilling system. What that means is the drill spins at about 20% of the rotational speed, and the barrel at 80%. The counter-rotation keeps the drill on the center axis of the barrel more precisely than just rotating the barrel, or just rotating the drill. We are able to consistently drill holes in our barrel steel (primarily 416R) that at the end of a 33.25″ blank that is only .005″ off of center axis.
We then ream the barrels to be .0004″ below desired finish bore size. After the reaming process we mandrel-hone the bores to be .0001″ below finish bore size. This process eliminates reamer marks in the barrel bore. Therefore very minimal lapping is needed after rifling to remove any tooling marks. We then rifle the barrel to any twist rate we like. With a fine lap after rifling, the barrel has no tooling marks and all surface metal is flowing in the direction of the twist of the rifling.
* 7mm BBM stands for “Blake Bramley Magnum”. Dan Bramley and I developed that cartridge together in October of 2017. The .30 BBM is the “Blake Barrel Magnum”, which I developed in May of 2018.
With miles of aisles and thousands of new products, the annual SHOT Show in Las Vegas is a near-overwhelming circus. There is so much to see, with scores of new products from around the globe. For this story, we start off with the official SHOT Show 2020 Day 4 Highlights video, a revealing look at the SHOT Show experience. Following that you’ll find six videos covering notable new products. Check out new Berger bullets, a new custom rimfire action, plus the radical new $5000 Laugo Alien pistol.
New RimX Rimfire Action with Rem 700 Footprint
We are always interested in new custom rimfire actions. With the growth of the NRL22 rimfire series, and potent rimfire varmint cartridges such as the .17 HMR and .17 WSM, we think the interest in rimfire custom rifles is growing. This video features the new RimX rimfire action. This features a Remington 700 footprint so it can fit a wide variety of stocks made for Rem 700s and Rem clones. That allows PRS guys to cross-train with a rimfire rifle that duplicates the ergonomics and feel of their centerfire match rifle.
This RimX action has some very cool features, such as interchangeable bolt heads so it can shoot .22 LR, .17 HMR, and (soon) .17 WSM. RimX action MSRP is $1150.00. Each bolt face features a non-protruding extraction system that allows for a flat breach face barrel to be installed without the need for timed extractor relief. This will make barrel interchangeability and installation easier than ever
Berger Bullets — New LR Hybrid Target and Hunting Bullets
At SHOT Show 2020, the big news from Berger Bullets was the arrival of new Berger Long Range Hybrid Target (LRHT) bullets and hunting bullets. Berger now offers some seriously big LRHT Bullet. Before the show, Berger announced the 7mm 190gr LRHT. At SHOT on Tuesday Berger showcased two new High-BC .30-Caliber LRHTs — the new 208gr and 220gr projectiles. All these LRHTs feature formed meplats for ultra-consistent BCs. In addition Berger unveiled two new heavy-for-caliber hunting bullets: The 6.5mm 156gr EOL Elite hunter and the .30 Cal 245gr EOL Elite hunter. In this video, Emil Praslick III explains the features of the new LRHT projectiles.
Laugo Arms states that its Alien pistol has the lowest bore axis of current semi-auto handguns. The barrel is fixed — it does not tilt-up like most semi-autos. Having shot the Alien at Industry Day on 1/20/20, we can confirm that the low bore axis does reduce muzzle flip, allowing very fast follow-up shots. With a fixed center rib, only the sides of the slide move back and forth. Initially only 500 Alien Special Editions will be offered, at the insane price of $5000.00 per pistol. You read that right — $5000 USD. Of course, in a year or two standard models should be available for a fraction of that cost.
This Alien pistol has been hailed as revolutionary. However, the Heckler & Koch P7 series of pistols had most of the Alien’s notable features way back in 1976 — 44 years ago. Like the Alien, the P7m8 and PSP featured a fixed barrel, low bore axis, and gas-delayed blowback operated slide. The HK P7s also had a unique squeeze cocker grip that eliminated the need for a manual safety.
H&K unveiled fixed barrel, low bore axis P7 pistol in 1976, 44 years ago. Production began in 1979.
Nightforce Wedge Prism — Gain Elevation for ELR Shooting
The Nightforce Wedge Prism is offered in two variants, 50 MOA or 100 MOA, that install forward of the riflescope to increase the effective elevation travel. The Wedge Prism optically shifts the incoming image to the riflescope by a precise elevation value, which directly adds to the available elevation travel within the riflescope. The Wedge Prism is designed to work optimally with 56mm front objectives. Nightforce says you can position two Wedge Prisms in parallel for maximum effect — up to 200 MOA total. These NF Wedge Prisms are pricey — MSRP is $990.00 for either the 50 MOA or 100 MOA version.
Annealing Made Perfect — AMP Mark 2 and New Automated Press
Gavin Gear of UltimateReloader.com checked out the latest offerings from Annealing Made Perfect (AMP), the state-of-the-art microprocessor-controlled induction case annealer. AMP is a New Zealand company run by father and son team Alex and Matt Findlay. Alex has extensive experience in the firearms industry while Matt is a talented engineer and product designer. Along with the AMP Mark 2 and accessories, Alex and Matt showed an advanced, servo-motor bullet seating machine with pressure sensors.
Jerry Miculek with New Mossberg JM 940 Pro Shotgun
GunsAmerica.com Editor True Pierce met with legendary shooter Jerry Miculek at SHOT Show 2020. Jerry showed the notable features of his new scattergun, the JM 940 Pro. This shotgun features a clean-running gas system, nickel boron-coated internal parts, and a competition-level loading port, elevator, and follower. For more info, check out the full article on GunsAmerica.com.
Bonus — Ryan Cleckner Chats about Gun University
The Gun University Website is a new resource for firearms news and technical information. We recently highlighted Gun University’s report on important ITAR rule changes that will affect firearms manufacturers, parts makers, and gunsmiths. One of the key contributors to Gun University is Ryan Cleckner, a former Army Ranger sniper instructor, attorney, and author of the Long-range Shooting Handbook. In this video Ryan talks about Gun University, his NSSF video series, and his ideas for growing the shooting sports.
The Berger Southwest Nationals (SWN), 2020’s biggest centerfire rifle match west of the Mississippi, is coming up next week. We know that many of our regular readers will be flying to Phoenix to attend the SWN. Here are some travel tips from experts in the industry.
If you’ll be traveling by air in the days ahead, be careful when transporting firearms through airports. It is important that you comply with all Homeland Security, TSA, and Airline policies when transporting guns and ammunition. Following the rules will help ensure you (and your gear) make it to your destination without hassles, delays or (God forbid), confiscations.
Good Advice from an Airport Police Officer
To help our readers comply with rules and regulations for air travel, we offer these guidelines, courtesy “Ron D.”, a member of our Shooters’ Forum. Before he retired, Ron D. served as a Police Officer assigned to Chicago’s O’Hare airport. Here Ron offers some very important advice for shooters traveling with firearms and expensive optics.
First, Ron explains that airport thieves can spot bags containing firearms no matter how they are packaged: “Don’t think you’re safe if your guns are placed in cases designed for golf clubs or trade show items. Baggage is X-Rayed now and cases are tagged with a special bar code if they contain firearms. It doesn’t take long for bad guys to figure out the bar coding for firearms.”
Carry-On Your Scopes and Expensive Items
Ron advises travelers to avoid placing very expensive items in checked baggage: “When traveling by air, carry on your rangefinder, spotting scope, rifle scope, medications, camera, etc. You would be surprised at the amount of people that carry-on jeans and shirts, but put expensive items in checked baggage. Better to loose three pairs of jeans than some expensive glass.”
Mark Bags to Avoid Confusion
Ron notes that carry-on bags are often lost because so many carry-on cases look the same. Ron reports: “People do accidentally remove the wrong bag repeatedly. I frequently heard the comment, ‘But it looks just like my bag’. When de-planing, keep an eye on what comes out of the overhead that your bag is in. It’s easy to get distracted by someone that has been sitting next to you the whole flight. I tie two streamers of red surveyors’ tape on my carry-on bag.” You can also use paint or decals to make your carry-on bag more distinctive.
General Advice for Air Travelers
Ron cautions: “Keep your hands on your items before boarding. One of the most often heard comments from theft victims was, ‘I just put my computer down for a minute while I was on the phone.’ Also, get to the baggage claim area quickly. If your family/friends can meet you there, so can the opportunists. Things do get lost in the claim area. Don’t be a Victim. Forewarned is forearmed.”
Choosing a Rifle Transport Case
Forum member David C., who will compete at the 2020 Berger SWN, offers this advice: “If you plan to fly with your rifle, a 55″-long case such as the Pelican 1770 may be too big and heavy. The 1770 is 36 pounds on its own and is quite unwieldly to move around. I would recommend going with a smaller case such as the Pelican 1720 with 42″-long interior. It weighs 19 pounds and if you separate your stock from the barreled action, everything fits just fine, as you can see below.” Editor: Note that you can also store a full-size spotting scope in the case along with your rifle:
Retired Airport Police Officer Ron D. advises: “Buy the best [rifle case] that you can afford. Don’t cry when your $3,000+ Benchrest rifle has a cracked stock or broken scope. Think about what it would be like to travel across the country and arrive with a damaged rifle. Baggage handling is NOT a fine art. There is no guarantee that your rifle case will be on top of all the other baggage. Then there is shifting of baggage in the belly of the plane. Ponder that for a while. Rifle and pistol cases must be locked. It doesn’t take a Rocket Scientist to figure out that a simple pry tool will open most case locks. There is not much that you can do to disguise a rifle case. It is what it is, and opportunists know this. Among thieves, it doesn’t take long for the word to get around about a NEW type of case.”
Great Deals on Plano All-Weather Cases at Amazon
Match season has begun, and that means hauling gear either in cars or on planes. Either way you need good cases for your firearms. We found the Plano All Weather Gun Cases at bargain prices. These are well-built and designed to protect whatever you put in them for a third the cost of some other brands. No Plano cases are not as refined as Pelican or SKB cases, but if you’re on a tight budget, the Planos can do the job. Read this article for more information on Plano cases.
Teslong Borescopes Update — WiFi and Rigid Rod Versions Product Report by F-Class John
Not more than a few months after the Teslong corded borescope hit the market to massive applause they’ve released a cordless WiFi-enabled corded version as well as a rigid rod model — two new models with important new features/functionality. When I originally reviewed the Teslong borescope I was blown away with the value, clarity, and ease of use. SEE Review HERE. That original Teslong really was a game changer in the borescope market. The large number of forum threads springing up since the Teslong release shows that that digital borescopes have finally found a large and enthusiastic customer base.
IMPORTANT: Guys — Watch the Videos!!! John does a great job showing the set-up and use of these Borescopes. You really need to WATCH THE VIDEOS! They show much more than we can illustrate with still images.
Despite all the love people have shown for the original, plug-in Teslong borescope, one common complaint was that it could not be used with smartphones or small tablets. With that in mind, Teslong surprised the market with the release of a cordless WiFi version that works with just about any device that has a WiFi connection. The new WiFi unit, which is in very high demand, costs around $75, just $25 more than the original plug-in version. NOTE –YES this WiFi unit DOES work with both iOS (Apple) and Android smartphones and tablets. However, you may wish to try a couple different Apps.
To use the WiFi Teslong, simply download Teslong’s viewer App, turn the unit on and connect to the Teslong WiFi in your device settings. While it does take a couple steps to connect each time, you are rewarded with a cordless version that can be used at home or the range equally well. Watch the video and you can see how the Wifi unit is set up and how it is used to inspect both a barrel and a sizing die. Do watch the video — it explains all. Along with live video feed, the WiFi control handle has a button to record still images.
Important — some guys had initial problems getting the WiFi image to display on their smartphones but that was normally just a software configuration issue. If you are patient, and follow the instructions, you should be fine. Some older guys had to enlist the aid of a 10-year-old grandkid. Note, as of 1/29/2020, the WiFi Version is temporarily out of stock on Amazon, but it can be ordered for $74.99 from the Teslong Webstore.
New Teslong Rigid Rod Borescope
Along with the WiFi version, Teslong has also released a borescope with the lens mounted on the end of a rigid metal shaft — a configuration similar to classic optical borescopes such as the Hawkeye. This new “shafty” Teslong has the same electro-optical sensors, connectors, and adjustable light as the original Teslong. However, this new rigid rig now uses a solid rod instead of a flexible cable. Having a solid rod makes using the unit much easier since you’re not fighting the cable. The rod also makes rotating the unit inside the bore more intuitive as it lacks the cable spring back of the flexible version.
Located on the borescope is an inch scale allowing the user to easily to measure how far into the bore they’ve gone for easy identification of any issues later. The whole unit comes in a nice heavy-duty cardboard tube that makes it easy to store and I can see it lasting as long as the unit itself.
Why choose the rigid Teslong? Importantly, the lack of a tethered cord allows you to rotate the unit more easily inside the barrel. Compared to the original corded Teslong, I did find that running the rigid borescope down the barrel without the mirror provided a larger view. That may be beneficial to some users. Overall, the optical clarity and definition remain excellent — certainly on par with the original unit.
General Teslong Borescope User Tips
The new Wifi and Rigid Teslong borescope share some basic features with the original plug-in, corded Teslong. All three devices feature a mirror on the end that screws on and has a jam nut to keep it in place and can be adjusted for focal length based on the caliber and they’re now including several extras in case of damage or loss. While they’ve always been good about replacing them free of charge there is a wait time, so the inclusion of extras is a nice bonus.
SUMMARY — Both WiFi and Rigid Teslong Borescopes Perform Well, Are Great Values
Overall these two new units are great additions to Teslong’s lineup giving users two great units to choose from. While most folks may gravitate to the WiFi version, I think there’s room for all three models (WiFi, Corded Plug-in, Rigid Plug-in).
Many people may find the corded or rigid versions more practical for around the house where they don’t necessarily need the cordless version and don’t want to worry about keeping it charged all the time. For any range use or out of town matches the WiFi with its smaller footprint and ability to work with any electronic device will probably make more sense and will help justify the additional cost. In the end, the amazing thing is that no matter which version you choose you’ll have a great borescope that will help improve your shooting.
Back in the old days, Pat McMillan told me: “You can not have two bags filled so hard that you gun bounces on them in the process of firing round at your target, especially if you have a rig with a very flexible stock. The bags must be set up in a manner for them to absorb the initial shock of the firing pin moving forward and igniting the primer. 
First, Ron explains that airport thieves can spot bags containing firearms no matter how they are packaged: “Don’t think you’re safe if your guns are placed in cases designed for golf clubs or trade show items. Baggage is X-Rayed now and cases are tagged with a special bar code if they contain firearms. It doesn’t take long for bad guys to figure out the bar coding for firearms.”
