Gary Costello recently won the Great Britain National League 600-yard Championship in F-Open class. Gary managed that impressive win despite Storm Hannah which caused torrential rain and 40 mph winds during the match, held at the Diggle ranges. Gary, a Forum member, reports that conditions were hellacious: “The weather was terrible, with horizontal rain and winds in excess of 40 mph. In fact, some shooters got blown clean off the target and many complete misses occurred.”
There’s a special story here, as Gary had been battling a life-threatening illness for many months. Gary told us: “This was my first National Competition since September 2018. I contracted a serious heart virus in October 2018. I was critically ill until January 2019. After undergoing treatment and 100% rest I recovered slowly, my focus was the 600-Yard Shoot in April. I am now 70% there and hopefully in another 4-6 months I hope to make a full recovery.” [Editor: Gary, we are glad you are on the road to recovery.]
In today’s Sunday GunDay story, we feature Gary’s American-crafted .300 WSM F-Open rifle. Note that Gary’s rifle has a Ezell barrel tuner and a recoil-reduction system in the buttstock. The .300 WSM does generate quite a kick with those big .30-caliber bullets.
Gary Costello’s .300 WSM F-Open Rifle
BAT M Action and Cerus Stock
This rifle was purchased from Jim Fowler (FalconPilot on the AccurateShooter Forum). This SG Rifles gun, crafted by smith Thomas “Speedy” Gonzalez, is a .300 WSM with BAT ‘M’ action (with nitrided bolt) and Cerus riflestock. Gary owns two other Speedy-built rifles.
Gary tells us: “My BAT ‘M’ action is a multi-port so I feed with my left and it ejects on the right. Speedy has worked on the firing control and timing, and I fitted the roller-cocking piece to aid smoothness and speed.” The fluted shroud is Speedy’s signature for fire control work.
Stunning Lenzi Co-Axial Front Rest
Gary tells us this impressive joy-stick rest “is a superb piece of engineering .. made by my good friend Alberto Lenzi.” Note the large stable base, and the deluxe counter-balance weight on the front end. Gary also uses a very nice leather rear sandbag crafted by Lenzi.
Riflescope — Prototype March 10-60×56 High Master
Gary Costello’s company is the European distributor for March Scopes. Gary was testing this scope as it has a new temperature-tolerant lens system to be released later this year
.300 WSM Load Details — H4350 with Berger 215gr Hybrids
Gary was shooting pointed Berger 215gr Hybrid bullets in Norma .300 WSM cartridge brass. The powder was Hodgdon H4350 with Muron KVB7 primers. Gary say his load runs around 2850 fps, and is very accurate. To demonstrate, here is a three-round, 100-yard test target, with a group measuring in the ones. Pretty impressive for a big bullet and a short magnum cartridge.
The UK has some wonderful places to shoot. This photo was taken at Blair Atholl in the Highlands of Scotland. Gary says “This is one of my favorite ranges and probably the hardest range to shoot in the UK. Due to the topography of the range you have to alter elevation as well as wind for pick-up and let-off. They say ‘Diggle Ranges Bark’ but Blair Atholl Bites!”
Blast from the Past — At Blair Atholl Ranges in Scotland
One of Europe’s very best F-Class competitors, Gary is no stranger to the winner’s circle. Here he is at the Blair Atholl Ranges in Scotland after a major victory a few seasons back. Gary says: “Blair Atholl, in the Estate of Blair Castle, is very scenic. The range is very tricky and is known as the hardest range in the UK to shoot due to the location of the targets cut into the hillside and valley. When the wind is at full value you often have to add one-half MOA elevation to every 1 MOA of wind. So thinking wind and elevation every shot is very difficult. I won this match some time ago and I do not recall the score. However it was a decisive win, and all matches in the competition were held at 1000 yards.” Gary was using a different rifle, but it also was a .300 WSM with a BAT action. His load was Hodgdon H4831 with Berger 215gr Hybrids, Murom primers, and Norma brass.
The event was the first GB National League event of the year, our only short range (600-yard) match. This is actually one month later than usual in hope the weather would be better, sadly that wasn’t the case!
I won the Championship, five points clear of runner-up Ian Boxall. My final score was 241-18V out of a maximum of 250. The course of fire was reduced due to Storm Hannah on Saturday. It was decided by our committee that for safety we should shoot under cover (Diggle has a 600-yard covered firing point). The goal was to get at least one match to allow the competition to continue on the Sunday.
When I saw the condition and the flags I decided I needed to shoot as quick as possible as wind speed and direction were changing in seconds….
So I shot like stink only watching one flag and the other targets and my shot indication on the target screen. My first sighter was a score One left (a FIVE on the U.S F-Class target). But after adjusting, my second sighter was a One right — so there were pick-ups and let offs of about FIVE MOA!
I split the difference and went for score, my first shot was a Four (Nine on USA target) which I then adjusted on and held accordingly for the rest of the string using the other targets as indication and the one flag I had identified, it went pretty well.
Day Two (Sunday) weather was completely different, much better with no rain. We were first up at 0900 and the winds were light with subtle changes. This was a two sighters and 20-shot match, I started well with two V sighters which were converted, my partner Richard Sharman also had a good start and we proceeded through the string shooting Vs and Fives until Richard’s shots started to not register, this happened three times so it was decided I would continue and Richard would shoot again on another target. This caused a lot of delay and disruption. I had lost my path and wind, due to the delay I was allowed a non-convertible sighter which was a Three. It took two further shots to get back into the swing and I then recovered and ended the shoot with a 97-10V.
For the Final Match, the wind had picked up and was causing quite a few lost points and curses. I knew I was three points clear going into this Final Match so I had to play it real safe not to drop shots and lose critical points. I favored a left 4-5 Ring hold so not to get caught on the pick-ups. I use the March MTR-2 reticle, on 40X this reticle is subtended at exactly one-half MOA and brackets the F-class target perfectly. I was not concerned about the V bull at this time, the plan paid off and I dropped two points only.
Are you shopping for a long range optic? Unfortunately, it is pretty much impossible to “test drive” a half-dozen or more optics. Thankfully, there are some video reviews on the internet that are, for the most part, helpful. Pew Pew Tactical (PPT) recently did a lengthy comparison of nine long range scopes. For each model PPT examined clarity, eye relief, reticle design, parallax, and windage/elevation travel. For each optic PPT also provides short videos showing the operation of the controls. FULL PPT REVIEW HERE.
NINE Long Range Scopes Compared
1. Vortex Strike Eagle 4-24×50mm
2. Vortex Viper PST II 5-25×50mm
3. Leupold VX3i LRP 8.5-25×50mm
4. Leupold Mark 5HD 5-25×56mm
5. Burris XTR II 5-25×50mm
This is actually a pretty good video. The host, Joel, tests and compares the Leupold Mark 5 vs. the Athlon Argos. Joel considers a variety of performance categories including clarity, tracking, elevation travel, ergonomics, and reticle options. This video asked the question “Can a $400 scope hang with a much higher priced optic?” You might be surprised how well the Athlon actually did.
Kalibre 22 — High-End Tactical Optics Comparison
In this video, Todd Hodnett explains the pros and cons of different brands and types of scopes. Scopes tested include Horus, Leupold, Nightforce, Schmidt & Bender, and Vortex. He uses the scopes in the field, and actually does a pretty good job describing the pros and cons of each model.
Top 10 Reviews — Manufacturer Marketing Videos Compilation
This video covers ten different scope models, from budget to high-end. For the most part the scopes appear in cost order, with the more affordable optics first. This YouTube video is mostly pieced together from manufacturer marketing footage, but it does cover a wide variety of scope options.
Please note, the above video does has some actual review segments, but nearly all the content is provided by the scope makers. So the Top 10 rankings are somewhat arbitrary. Nonetheless it is handy to have ten scopes covered in a single video. In order of appearance, here are the ten scopes featured, with video time marks if you want to “fast forward” to particular models.
TEN Scopes In Order of Display
10. Burris Veracity Riflescope: 00:23
9. Vortex Viper PST Gen II Riflescope: 01:24
8. Nikon BLACK FX1000 Riflescope: 03:18
7. ATN X-Sight 4K PRO Riflescope: 04:29
6. Bushnell Engage™ Riflescope 06:00
5. Leica Magnus i Riflescope: 07:50
4. Nightforce ATACR 5-25x56mm F1 Riflescope: 08:29
3. Vanguard Endeavor RS IV Riflescope: 10:31
2. Leupold Mark 8 Riflescope: 12:33
1. Swarovski Z8i Riflescope: 14:21
Great Deals on Vortex Now
Looking for a great deal on a new scope? Leading vendor EuroOptic has a wide variety of Vortex Scopes at deeply discounted close-out prices now:
A carpet is used up front for smoother tracking with the Joy-Pod’s flat, ski-style feet. The arms of the Joy-Pod were painted to match the stock. The rear bag features low-drag material on the ears.
On Sundays, we feature notable rifles that exhibit fine craftsmanship, quality components, and noteworthy shooting accessories. Today we are featuring an F-TR (F-Class Target Rifle) rig that showcases the types of components, and accessories used by top F-TR competitors — including a coaxial bipod and Labradar Chronograph. If you’re considering getting started in the F-TR game, take a close look at this modern F-TR build from Forum member DM.Oakes.
Modern F-TR Rig with Borden Action, Krieger Barrel, and SEB Joy-Pod
This handsome .308 Win F-TR rig features a smooth-running Borden BRM action, 30-inch 1:10″-twist Krieger barrel, and an X-Ring Laminated Wood stock. Up front is a coaxial “Joy-Pod” joystick bipod. This is a state-of-the art, wide footprint bipod used by many competitors at the Worlds in Canada. The long joystick allows the “driver” to quickly adjust both elevation and windage in a smooth, continuous motion. The Joy-Pod can be adjusted so it will hold setting during the shot — you don’t have to “hard-hold” the joystick. Many shooters let the joystick slide through their fingers as the rifle moves back on recoil. With a little practice (and careful placement of the rear sand-bag), the tracking is excellent and you can slide the gun right back to point of aim after each shot.
This F-TR rifle is shown during load testing with a LabRadar chronograph.
» Full LabRadar Field Test/Review by Ray Gross
If you are considering purchasing a LabRadar Chronograph system, we strongly suggest you read the very thorough and informative LabRadar Review by Ray Gross, past Captain of the USA F-TR team. Ray notes: “It takes me about 3 minutes to set up [my LabRadar] at the range. Because there are no downrange screens, I do not have to hold up other shooters on the range like I would when setting up a traditional chronograph. The convenience alone will mean that I will use it more often than my old chronograph. Every time I take it out, I enjoy it a little bit more.”
We know many of our readers have large firearms collections. If you’ve been collecting guns for a decade or more, chances are you’re running out of room in your gun safe. For guys who need a bigger safe, we’ve found a REALLY BIG GUN SAFE at a great price.
Right now CostCo is offering the Cannon CS72 Executive Series 72-Gun Safe for just $749.99 DELIVERED! That’s a great price for a HUGE safe with 43.8 cubic feet of internal space. This 649-pound behemoth measures 59″H x 45″W x 28″D and weight 696 pounds (over 1/3 of a ton!). This is built strong with 1″ thick composite door, six 1″-diameter locking bolts, and 60-minute fire rating (dual expandable fire seal).
Shipping Included in $749.99 Price!
This $749.99 price includes “Standard shipping via common carrier” to the lower 48 states. The estimated delivery time will be approximately 7 – 10 business days from the time of order. NOTE: This is a great value. You could easily pay $1600 or more for a safe this size from a typical local vendor.
Cannon CS72 Safe Features:
72 Gun capacity — 43.8 Cubic Feet
Exterior dimensions: 59″H x 45″W x 28″D
696-pound weight (0.348 Tons)
60 minute fire rating
UL-Listed Digital lock
Triple hard plate protect lock mechanism
Six 1″-diameter active locking bolts, 14-gauge Steel Body
Dual expandable fire seal — seal expands up 12 times its size
Warranty: Free repair/replacement after Fire, Burglary, or Natural Flood
Comment About Safe Weight:
At 696 pounds, this Cannon CS72 is a HEAVY Safe. That can be a one-time negative when you are moving the safe into your house or shop. However, Big and Heavy is a big plus when it comes to security. Thieves prefer to target safes that can be moved quickly with a dolly or hand cart. Bolt this safe to your floor and it isn’t going anywhere.
In connection with the 148th NRA Annual Meetings & Exhibits, FMG Publications is offering FREE downloads of the July issue of GUNS Magazine and July/August issue of American Handgunner.
Looking for some nice gun-centric reading material? Here’s a cool, FREE offer from FMG Publications. Right now you can access free digital editions of the latest issues of GUNS Magazine and Handgunner Magazine. Both these magazines offer interesting stories and great gun photography. But there IS a catch. To access these digital editions, you must enter some name and an email address first. If you respect your email privacy you can be creative and figure out a simple solution for that. Click the links below to download these two issues for free.
Notable features in the GUNS Magazine July 2019 Issue include: 10/22 Collectibles (pp. 32-33), Ross Straight-Pull Rifle (pp. 34-35), T/C LRR 6.5 Creedmoor (pp. 44-48), Brownells BRN-10 Retro AR10 (pp. 50-52), Skinner Sights Bush Pilot .45-70 Survival Rifle (pp. 58-60), Eight Great Knives (pp. 60-62). Honest guys — there’s some good content here, worth reading.
“NRA’s celebration of freedom reminds all of us how important the Second Amendment is. We’re excited to share in the celebration by exercising our First Amendment rights of freedom of the press. In this case, free downloads of gun press to NRA members and non-members alike,” announced FMG VP of Business Development Randy Molde.
Among its feature highlights, American Handgunner’s July/August issue showcases one of Ruger Custom Shop’s debut offerings: The SR1911 Competition Pistol. Working closely with ace shooter Doug Koenig, the result is a beautifully fitted, accurate, easy-shooting American classic — built by a leading USA gun-maker.
Our friend Jim See of Elite Accuracy LLC recently tested the depth-adjustable hand priming tool from Frankford Arsenal. This product, called the Platinum Series Perfect Seat Hand Primer has some unique features. Primer seating depth can be adjusted with a handy wheel in the tool’s center handgrip. Each “click” of the wheel moves the primer post .001″ (one one-thousandth of an inch). Additionally, the design of the case-holder allows quick and easy removal of a primed case. The unit ships with a full set of shell-holders to match all types of cases. Like many other hand priming units, the primers are loaded into a flip tray that attaches to the head of the tool.
Here is Jim See’s quick review of the Frankford priming tool:
“The Frankford Arsenal perfect hand-priming tool is legit. The tool is built heavy and strong. The only plastic parts in it are the tray and lid. The [primer] seating depth adjustment… is simple and accurate. Easy to operate. I primed 1000 cases, averaging 23 per minute. I adjusted the depth of seating between two different lots of brass in seconds. The system seats primers easily with one hand operation. The cases slide out on their own after seating. Insert, seat, reach for a new case at the same time as you are operating the lever, case slides out and you are inserting the next piece.”
Overall, Jim was “Super impressed with the quality and the results. This thing is super smooth — way less pressure needed than my Lee or RCBS. It’s a lot faster too.” Jim add that one can switch from small to large primer posts in 10-15 seconds.
This Video Shows the Frankford Priming Tool in Operation:
Even with premium brass you may want to adjust your primer seating depth: “Every thing has a tolerance that is acceptable in manufacturing. If primer pocket depth has a .005″ tolerance and the primers themselves have a .002″ tolerance you can see why adjustments would be needed. In this case the two lots were manufactured on year apart. Could you expect them to be identical?”
This 6 PPC features a Nesika Extended ‘C’ action, Krieger 1:13.5″-twist LV barrel, Kelbly stock, and stunning paint by Mike Lavalle of killerpaint.com. For an eye-catching R-Rated paint surprise, Click HERE.
One of the most popular items in our Shooters’ Forum is the ongoing “Pride and Joy” thread. Since 2009, Forum members have posted photos and descriptions of their most prized firearms. Here are some of the most recent “Pride and Joy” rifles showcased in our Forum. Do you have a gun you’d like to see featured there? Register for the Forum and you can add your favorite gun to the list.
Click image to view large, full-screen photo!
For this week’s Sunday GunDay we’ve selected five fan favorites from the Pride and Joy archives. First up is this custom 30 BR brought to you by ANSHUTER2013 and built by Dave Bruno. We were captivated by the clean lines and handsome looks of the Roy Hunter Curly Maple stock. Nestled in that stock is a BAT B action fronted by a 1:17″-twist James Lederer 24″ HV barrel. A Jewell trigger with fixed 42x44mm Nightforce scope round out this beauty.
This state-of-the-art 6 PPC boasts all top-tier components. And owner Wes R. shoots it with a superb rest/bag/pad set-up that inspires envy. This “Bughole 6 PPC” features a Bat DS action, Bix’N Andy trigger, with Bartlein 1:13.75″-twist barrel. The stock is a super-low-profile Scoville with carbon strengthening. The front rest is a SEB NEO, while in the rear is the new Lenzi sandbag. Folks tell us the Lenzi is super stable, which improves tracking from shot to shot. Note the timer attached to the front rest as well as the nice Edgewood leather bench “blanket” and arm-rest pad.
Forum Member Killick attached PickleForks to his handsome blue Eliseo R1 TubeGun now chambered in .284 Winchester, a top choice for the F-Open discipline. Killick explains: “Behold! An Eliseo R1 F-Classer. This started out as an R1 Long Range sling rifle (6XC) with a Borden TubeGun action. It is now rebarreled in .284 Win with Gary’s PickleFork fore-end adaptor. Props to Gary Eliseo at Competition Machine LLC.”
Sometimes clean and simple is the way to go — particularly with a hunting rifle. WEATHERBYFAN’s 6.5 Creedmoor is built around a Stiller Predator single-shot action in a texturd, green Wildcat Var-Tac stock. The 1:8″-twist Bartlein barrel is finished at 28″. That’s pretty long for a hunting rig, but it delivers added velocity. Finishing off this nice rigle is a Zeiss 6-24x50mm optic. Sometimes less is more and this is a perfect example of that.
Our final offering is from Forum member 300_WHISPER. Completed just months ago by gunsmith CALEB85, this .308 Win rifle features a Bighorn TL3 action with a Bartlein M40 26″ 1:10″-twist barrel, and Manners TA Elite stock. Other components include Trigger Tech Special, Area 419 self-timing muzzle brake, and a Weaver Tactical 3-15x50mm FFP mil/mil optic. When test-fired by Caleb with ammo using Berger 175gr OTM Tactical bullets, this nice .308 Win delivered a 1.6″ 5-shot group at 400 yards. The owner says “It’s my dream rifle. I couldn’t be happier”.
“Koenig” (or König) means “king” in German. That is indeed appropriate for Doug Koenig, 18-Time Bianchi Cup winner, who is now starting to conquer the rifle world as well. Koenig, considered by many to be the best action pistol shooter on the planet, proved he’s an ace with rifles too, as he recently won two PRS matches in Production Division. Koenig, Captain of Team Ruger, was shooting a Ruger Precision Rifle (RPR), chambered in 6mm Creedmoor. Notably, Production Division limits rifles to $2000.00 for the gun ($4000.00 overall with scope). You can buy an RPR for around $1100.00 typically ($795.00 at GrabAGun), so Koenig was shooting against competitors with rifles that cost nearly twice as much. That’s impressive.
Koenig Wins Production Class at two Spring PRS Matches
Koenig took home a pair of Production Division titles at this year’s WAR Rifles Shootout and MAP Spring Shootout Precision Rifle Series (PRS) matches.
With a final score of 128.00 and a time of 58.51, team captain Doug Koenig took first place in Production Division at the WAR Rifle Shootout PRS match in Mount Victoria, MD. The WAR Rifle Shootout has a challenging 22-stage course of fire. Along with winning Production Division, Koenig also finished twelfth overall. “The tough course of fire and 15-25 mph winds at the War Rifle match were brutal, but my Precision Rifle, equipped with a Leupold VX-3i LRP and loaded with Hornady ammunition, continued to perform,” said Koenig.
Koenig then secured another Production Division win at the MPA Spring Shootout held at the Arena Training Facility in Blakely, GA with a final score of 173.00 and a time of 58.89. “The MPA match had some long shots out to 800-1356 yards, but my factory rifle got the job done and helped me win my third production class title in a row. That proves you don’t need to spend a fortune to get started in PRS competition.”
According to PRS standards, Production Division rifles are not permitted to be altered or improved in any way from the original factory configuration, and the retail price may not exceed $2,000.
Pre-Fit Barrel Options for the Ruger Precision Rifle
While PRS Production Division competitors like Koenig must stick with factory barrels, there’s no law that says you can’t upgrade your own RPR that’s not used in PRS matches. A barrel swap is probably the single best hardware upgrade you can make. A new custom barrel will improve inherent accuracy and shot-to-shot consistency. Krieger Barrels offers Pre-Fit barrels for the RPR in many popular chamberings including 6XC, 6mm Creedmoor, .243 Win, 6.5 Creedmoor, 6.5 PRC, and .308 Win. These “Drop-In Ready” barrels come finish-chambered and threaded to fit the Ruger action, with factory-spec muzzle threads. The Ruger barrel attachment system allows correct headspace with a pre-chambered barrel. Krieger explains: “Thanks to Ruger’s proprietary barrel nut design, a competent gunsmith will be able to swap out your barrel using an AR15 barrel wrench and proper headspace gauges.”
Keeping your barrel cool has many important benefits — it will definitely enhance barrel life and can help maintain accuracy over the course of long shooting sessions. Now there is a new way to quickly dissipate heat from your rifle barrel — Barrel Blizzard
The makers of BarrelCool have created a new dual-fan barrel cooling device, called the Barrel Blizzard. Each powerful fan moves 30 cubic feet of air per minute — that’s serious cooling power. This unit is powered by a common USB-style battery. The housing mounts easily to the barrel, and the twin fans can each be adjusted 360° to various angles (You can even use one to cool the gun and the second to cool the operator on a hot day). This should be available very soon at the introductory price of $74.99
Reduce Barrel Cooling Time from 45 Minutes to 10 Minutes
How well does the Barrel Blizzard work? The makers tell us: “Repeated tests show that the Barrel Blizzard cuts barrel cool-down times significantly. What might take 45 minutes, can often be reduced to less than 10 minutes. And if you combine the new Barrel Blizzard with BarrelCool, the in-chamber fan, you can get a hot barrel down to near-ambient temperature in approximately 5 minutes.”
Barrel Cool-Down Times for Barrel Blizzard Alone and Blizzard + BarrelCool
We think this product will definitely be popular with varmint shooters in the summer months. Those guys may shoot hundreds of rounds in a day. Many serious varminters bring along a couple spare rifles, so that they can swap rigs when one barrel heats up. With the Barrel Blizzard they may be able to keep shooting with minimal wait time, and no rifle change-outs. Byron Sumoba, one of the designers, notes: “With a rechargeable 2600 mAh battery. We are getting about 2.5 hours of continuous use out of a battery pack.”
Who can benefit from this product? The makers say this is “For the shooter wanting to drastically reduce their load development time at the range… or the varmint hunter looking to cool that barrel down and increase barrel life.”
Barrel Blizzard Can Also Cut Mirage
This system can also cut mirage, by reducing the hot air rising from your barrel. If a mirage band is not enough on hot days, you can just rotate one of the fans to send the flow down the barrel towards the muzzle. This will help reduce mirage coming off the barrel.
Review by James Mock
If you were charged with building a scope for F-Class or long range Benchrest, what features would you want? Vortex asked that question, received feedback from many competitors, and then set out to build a new high-magnification, zoom comp scope that would set a new “performance for price” standard.
The new Vortex Golden Eagle has features that this shooter really appreciates. It has a power range of 15x to 60x with a 52mm objective lens. Vortex has attempted to keep the weight as low as possible and the cost reasonable. My initial impression is that Vortex spared no expense in developing this scope. The “street price” for this premium scope is a reasonable $1499.00. Plus it has Unconditional Lifetime Warranty. Given its features, performance, and price, I believe that this scope will sell very well.
Premium HD, extra-low dispersion glass
APO (apochromatic) objective lens system with index-matched lenses
XRP multi-coated lenses for max light transmission
ArmorTek extra-hard lens coating to protect lens from dust, dirt, and smudges
Fogproof and Waterproof (Argon gas purged)
Specifications
Field of View at 100 yards: 6.3 feet at 15X; 1.7 feet at 60X
Main Tube: One-piece 30mm
Length: 16.1 inches; Weight is 29.7 ounces
Objective Lens: 52mm
Eye Relief: 3.9 inches
Reticles: SCR-1 FCH; ECR-1 MOA
Testing the Golden Eagle
I recently tested a Golden Eagle with the ECR-1 reticle. On this model the Hash Marks subtend 1 MOA at 40X. There is also a fine crosshair reticle (SCR-1) available. Initial tests with the scope were done on June 28th and I was very impressed with what I saw. With a new scope I always shoot the square (box test) to test tracking and amount of movement. I shot the square today after shooting a 5-shot group at 250 yards (my longest available distance). Below is a picture of the box test target that I shot. Yes, shot #5 went through the exact same hole as shot #1.
Below is the 250-yard target I shot before doing the box test. To get to the 100-yard target, I clicked down 14 clicks (1/8th MOA) and the scope was spot on. It is really a pleasure to use instruments that do exactly what they are supposed to do. With the Louisiana mirage, I shot this orange/white target at 40X instead of the maximum 60X. I did not have any problem seeing the 6mm bullet holes at 40X. The optics in this scope are to my old eyes are as good as any that I have used (regardless of price).
Competition Test Success — Golden Eagle Delivers a Win
My next use of this scope was at our monthly 600-yard match on July 15th. It was a typical mid-July day in north Louisiana — very hot and humid with light switching winds. The mirage was terrible, but I managed to squeak out a victory with a 188/5X score out of 200/20X possible. I shot the Golden Eagle at 40X all day and it performed perfectly. No one could see bullet holes today, even with the high powered premium spotting scopes. This is a quality scope and it may be a “lucky” scope in that I did not expect a win with a 6mm Dasher barrel with 2500 or more rounds through it.
Point of Aim Test with Hood Scope Checker
I also tested the Golden Eagle for holding Point of Aim (POA). For this procedure, I used the Hood scope checker (loaned to me by Bart Sauter). To use this, one mounts two scopes side by side. Ideally one scope has proven its ability to hold POA. Here I used a Valdada 36X BR model as my control scope. It has proven over an 8-year period of time to hold its point of aim. I mounted these scopes on my BAT/Leonard 6mm PPC and adjusted each to the same point on the target.
As one can see in the above picture, these are big scopes. After the first shot, I noticed that the reticle dot on the Vortex seemed to be about 1/8th MOA to the right of its original position. I stopped to check for ring slippage (which I had experienced in prior tests). There was no apparent slippage, so I checked the parallax and found that there was some parallax correction needed. This was probably the source of the apparent shift in point of aim, but I cannot be sure of that. I fired three more shots (checking after each) and found no shift.
After testing for POA shift, I fired the remaining rounds using different aiming points. I fired 5 rounds (upper left) using the Vortex and 3 rounds to the right of those using the Valdada scope.
CONCLUSION — A Very Fine Optic at a Reasonable Price
While testing this Vortex Golden Eagle scope, I developed a real fondness for it. I appreciate its great optics, eye relief and crispness of adjustments. If I thought that this scope did not hold POA, I would use my old Valdada in the 600-yard matches in which I participate. Further testing has shown no tendency to shift point of aim.
If I am allowed to keep this scope until the fall, I am sure that I will be able to see 6mm bullet holes in the white at 600 yards. Seeing those 6mm holes is very difficult, but that is my dream for a premium high-powered scope. During the summer months in north Louisiana, the air is much too “dirty” to spot small holes at 600 yards. By October, there should be some conditions in which one can use the premium optics to see bullet holes in the white at 600.
In summary, let me say that this scope has become one of my all-time favorites because of its bright, clear images and its great reliability. If you are looking for a great long-range scope that is reasonable in cost, try the Golden Eagle from Vortex.– James Mock
Competition Test Success — Golden Eagle Delivers a Win
