There has been a trend to ever-lighter handgun frame construction, in an effort to make pistols lighter and more convenient to carry. Ruger just introduced the LCR 357, a .357 Magnum carry revolver with a frame made, in part, from plastic. Well, perhaps weight reduction efforts have gone too far, at least when it comes to magnum chamberings in handguns.
A Smith & Wesson .44 Magnum model 329 PD revolver recently broke in half while shooting Winchester factory ammo. The whole front end of the gun sheared off forward of the cylinder. Cause of the failure is unknown, but it does not appear that the barrel was obstructed, as there was no visible damage to the barrel assembly forward of the frame. We really don’t know why this revolver broke in half, though some observers speculated there may have been hairline fractures in the frame. That’s just a guess. It’s also possible that the factory ammo was over-charged. The pictures below were posted by the gun owner on Photobucket and first linked on AR15.com.
Scandium Alloy Frames
The model 329 PD has a “Scandium AirLite” frame, which is in fact an alloy of aluminum and scandium. When combined with aluminum, scandium (which costs ten times as much as gold by weight), forms an alloy that is lighter than titanium and as much as three times stronger than ordinary aluminum. Apparently however, there can be problems with scandium construction… as the photos reveal. Last year, Smith & Wesson recalled 270 limited-edition Performance Center m329 revolvers because barrel assembly may have caused frame damage. The model 329 PD shown in this article was NOT one of the recalled Performance Center guns.
Make My Magnum from Steel… The Smith & Wesson model 329 PD weighs only 25.1 ounces total, unloaded. Why one would want to shoot “full-house”, high-pressure loads through such a light gun puzzles this Editor. For a carry gun, lower-pressure .44 Special loads seem more appropriate. Smith & Wesson makes a variety of heavier, all-steel handguns chambered in .44 Magnum. If I was to shoot a steady diet of full-power .44 Magnum loads through a revolver, give me a gun with a solid steel frame, such as the classic S&W model 29. After seeing these shocking kaboom photos, when shooting true Magnum loads through a Scandium-framed revolver I would nervously ask myself the question famously posed by Clint Eastwood’s Dirty Harry: “Do I feel lucky?”.
Brownells has added a new Professional Drill Jig to its collection of gunsmithing tools. The $194.99 jig, made by B Square, aligns hole-spacing for popular scope bases on most popular military bolt action receivers. According to Brownells, this jig: “aligns mount hole-spacing for Weaver, Redfield and Buehler bases on all Springfields, U.S. Enfields (not SMLE), Japs, Mausers, Remington 30s and similar bolt actions.” Brownells says this unit saves time and eliminates tedious measuring as it “automatically locates holes in reference to recoil shoulder, and aligns and spaces holes vertically on the centerline of the receiver.”
Brownells’ Drill Jig features all-metal construction. The jig bars, base block and top piece are gold-anodized aluminum while the bore arbor and “V” bushings are blued steel. For the $194.99 price, the Pro Drill Jig includes two bars (Mauser and Spgfld/Enf/Jap,), complete mounting assembly, and an interchangeable No. 31 drill bushing.
Editor’s Comment: In the past, we haven’t been particularly impressed with B Square consumer products, particularly B Square rails and rings, but with CNC machining these days, the Professional Jig should be a quality tool. Remember that Brownells offers a 100% Satisfaction Guarantee on everything it sells: “If you aren’t completely, 100% satisfied with any purchase you receive from Brownells, for any reason, at any time, return it for a full refund or exchange. No hassle, no problem.”
Timney Mfg. now sells triggers for left-hand Remington m700 rifles. There is both a standard lefty model (#502) and a safety-equipped lefty model (#511). The model #502 uses the existing safety and bolt stop in your gun, while the model #511 has an external safety on the left side of the trigger housing. Both these left-hand triggers require no gunsmithing, are fully-adjustable, and can be ordered with default pull weights ranging from 1.5 pounds to 4.0 pounds.
External Safety Trigger Based on Innovative 2006 Design
In 2006, Timney began producing a new drop-in trigger for the Remington 700 with external safety. This was a totally new design with a safety that blocks the trigger not the sear. For 2010 has adapted this trigger for left-hand Rem 700 rifles. If you don’t need an external safety, Timney also now offers a standard left-hand trigger. MSRP for either version is $124.95. The housings of both triggers are milled from solid billet. Other components are machined using state-of-the-art Electrical Discharge Machining (EDM) from high-grade solid steel. This allows Timney to maintain very precise tolerances on its triggers. For more info call toll-free 866-4TIMNEY, or visit www.timneytriggers.com
If you use an AR-platform rifle for varminting, multi-gun matches, or Service Rifle competition, one simple upgrade you can make to enhance reliability is to replace the mil-spec gas rings with a one-piece McFarland™ bolt gas ring. The McFarland ring is a single spiral of spring steel that loops around the bolt three times and leaves no path for gas leakage. With conventional gas rings, you need to correctly rotate each ring so the “gap” does not line up, thereby allowing gas blow-by that can cause cycling problems. The one-piece ring is an inexpensive, “set and forget” solution that eliminates the need to monitor your ring position on the bolt body.
The one-piece McFarland gas ring is recommended by Fulton Armory and other AR experts. Installation is simple and the one-piece rings last a very long time. One AR user comments: “Ever since I tried single rings I would never change back to mil-spec rings. I’ve experienced more consistent recoils and cyclic rates of fire. And, as to wear — I haven’t worn one out yet.” On Brownells.com, two gunsmiths offered these reviews:
“Easy install, zero chance of a gap, one less thing to worry about in the bolt carrier group. This item should greatly improve gas pressure consistency. This is a ‘must have’ item.” — Jake, SC
“The concept is simple and sound. The one-piece gas ring removes the possibility of gaps lining up. It installs easily, holds great tension, and is cheap. Doesn’t get much better.” — Lane, TN
The McFarland™ one-piece bolt gas ring can be purchased from Brownells for $3.99 (item 100-001-257) or from Fulton Armory for $2.99 (item FA-AR-300-109). Purchase three or four at once to save on shipping costs — that should be enough for a decade of AR shooting.
Thanks to Savage’s signature barrel nut system, it’s easy for Savage rifle owners to swap barrels without gunsmith assistance. With a pre-fit barrel from Pac-Nor or Shilen you can easily re-barrel your rifle and set the headspace with go/no-go gauges. In addition to a barrel vise, you’ll need a specialized barrel nut wrench to swap Savage barrels. Now through 5/31/2010, MidwayUSA has the Wheeler Engineering Savage Barrel Nut Wrench on sale for just $22.99, marked down from $38.49 (a $15.50 savings — roughly 40%). For comparison, Brownell’s charges $47.90 for the Sharp Shooter Supply Savage barrel nut wrench.
The double-ended Wheeler Savage Barrel Nut Wrench (item #288765) allows easy removal of the barrel nut on Savage model 10, model 110, and model 12 series rifles. Made from 3/16″ steel, the Wheeler tool features two 1/2″ square drive holes for a swing bar or torque wrench.
Gene Beggs operates his own 100-yard indoor tunnel and rifle testing facility just outside of Odessa, Texas. Gene provides instruction and “tunnel time” for serious benchresters looking to improve their skills and optimize the accuracy of their rifles. Along with teaching the fine points of short-range benchrest, Gene has been developing two radical new rifles, one chambered in 220 Beggs, a slightly modified 220 Russian, and a second chambered in 6mm Beggs, a necked-up version of the 220 Russian that retains the original body taper and shoulder angle.
Both rifles share a skeleton design which uses the Stiller Cobra or Viper action as a central load-bearing member. Remarkably, there is no conventional fore-arm at all. Gene has bolted, directly to the barrel, a 3″-wide bag-riding aluminum sled. The sled was not designed as a mid-barrel tuner, but it might have some beneficial effects in that regard. However, the tuning functions are handled by two concentric rings threaded to the muzzle. Gene believes that with minor rotations of his front tuning rings, he can dial the gun into tune and the tune can be easily adjusted as conditions warrant.
Do Mr. Beggs’ guns shoot? Absolutely. We had the chance to visit Gene in Odessa. We shot both the 220 Beggs-chambered rifle, and its 6mm Beggs-chambered cousin. Both rifles are nearly identical, though the Heavy Varmint-weight 220 has a longer, 27″ barrel compared to 22″ for the Light Varmint 6mm.
In the tunnel, the 220 HV, with a no-turn-neck 220 Beggs chamber, produced three-shot groups in the low ones and zeros right out of the gate, even before the tuner was optimized. With a barrel with over 1000 rounds through it, after firing 40 rounds without cleaning, Gene produced a tiny 5-shot group in the low ones. The first shot was slightly high (a common occurence in the tunnel according to Beggs). The last 4 shots, rounds 42-45 since the barrel had been cleaned, went into 0.084″. This rig, though radical in the extreme, certainly appears fully competitive with more conventional BR rigs, and it tracked superbly, with no hopping or rocking on the bags.
220 Beggs — Simple, Accurate, Efficient
We were also very impressed with the 220 Beggs cartridge. It’s basically a plain 220 Russian with a sharper radius at the neck-shoulder junction. Gene has commissioned a 220 Beggs reamer with matching seating and full-length sizing dies. The little cartridge achieves 3600+ fps with a 52gr bullet, pushed by Benchmark powder.
From what we could tell during our short visit, the 220 Beggs is easy to load for, and performs exceptionally well with either turned (.250″) or no-turn necks. The recoil was noticeably less than a 6mm PPC, making the gun a joy to shoot. This round, we felt, could also be an outstanding varmint cartridge. The velocity is there, and we don’t think any other 22-caliber varmint cartridge is going to beat it for inherent accuracy.
As for the 6mm version, Gene told us: “The 6mm version of the cartridge performs best with Hodgdon’s H4198 Extreme, but the 220 has proven it will shoot well with just about anything you put in it including N133, H322, Benchmark, 8208, Norma 200 etc. It is the most trouble-free, user friendly cartridge I have ever worked with and will compete heads-up with anything. It’s also very easy on the shoulder.”
How to Learn More
Gene sells components (reamers, dies etc.) for the 220 and 6mm Beggs, and also offers training/testing sessions in his West Texas Tunnel on an appointment basis. For more information, or to schedule a session, email genebeggs [at] cableone.net.
Brownells’ 4th Annual Gunsmith Career Fair takes place on April 23 and 24, 2010, at Des Moines Marriott Downtown in Des Moines, Iowa. The event, free to gunsmiths and exhibitors, is designed to help new gunsmiths find work and otherwise advance their careers and businesses. Expert gunsmiths and gun industry leaders will be on hand to share their experience and lead seminars. Scheduled Seminars include:
- Time = Money (The Cold, Hard Facts)
– Financing your Business
– Gunsmithing Tax
– Increasing your Revenue through Engraving
– Gunsmithing for a ‘Big Box’ Retailer
– Merchandising Tips
In addition, Tom Shay (Profit Plus) will outline the essential components of a business plan and BATF Reps will host two seminars on Federal rules and regulations pertaining to gunsmithing.
Frank Brownell told us, “I’m delighted to see the seminars growing. Our goal is to make the Career Fair much more than just a place to find a job.” There’s still time to register to attend or exhibit. Sign up now at gunsmithcareerfair.com or call Stacy or Jill at (641) 623-5401. NOTE: Attendees and exhibitors should book hotel rooms and flights early as other major events are scheduled in Des Moines that same weekend.CLICK HERE to watch Gunsmith Career Fair VIDEO (Recommended).
Forum member Ken Littlefield recently had a older CMP Remington 40X restored/upgraded with a handsome walnut prone stock and top-of-the-components. Ken also added a CG Trigger and a RightSight front sight made by Stallings Machine. There’s also an adjustable cheekpiece, adjustable buttplate, and what looks like an aftermarket trigger guard and handstop. Ken posted his upgraded 40X on our Shooters Forum, noting: “Jim Cloward recently finished restocking my CMP 40X in English walnut. The rifle also has a CG uni-trigger and Rightsight. Jim also fitted a 0 degree rail to the receiver (I have a Leupold 6.5-20 EFR scope for ‘any sight’ training and matches). Jim can be reached at (425) 334-3006. The rifle will be used primarily as a winter training rifle for Palma, but hopefully we will sneak in a smallbore prone match now and then.”
Hopefully Ken can tell us more about the build and all the hardware upgrades. Ken certainly has created of the nicest 40X rimfires we’ve seen. Ken’s beautiful 40X has inspired envy among fellow Forum members. Flatlander posted: “Ken, I applaud your (incredibly successful) efforts to bring one of these old CMP rifles to the level of aethetic beauty and functionality it’s entitled to. I’d love to see more of these rifles ‘all dressed-up’ instead of stored in someone’s closet.”
After we reported that Tyler Rico of Arizona won the Nevada Regional High Power Championship (at the ripe old age of 15), some of our readers asked about Tyler’s match rifle. Tyler, who earned his Distinguished badge at age 13 (the youngest ever to do do), primarily shoots AR-platform rifles. The AR with which Tyler won the 2010 Nevada Regional featured a custom 6mmAR upper built by Robert Whitley’s AR-X Enterprises. The 6mmAR chambering, basically a 6.5 Grendel necked down to 6mm, was popularized by Robert, who is himself an avid High Power shooter.
Tyler Rico’s 6mmAR upper has an interesting history. Whitley explained: “Originally we built it up for some testing by the Marine Shooting Team and we took it down to Quantico. They liked it a lot but did not have authority or funding to buy them. When Tyler’s father called me looking for an upper for Tyler, I offered a special deal on it because we wanted to help support a junior shooter.” Built on a heavy-walled DPMS Low Pro receiver, Tyler’s upper features a 26″ Krieger 1:8″ twist barrel, and a side-positioned charging handle.
According to Whitley, “My test rifle with Tyler’s upper shot great. Above is a photo of one of the initial 10-shot, 100-yard test targets I shot with the upper at 100 yards. This gun really hammered. Remember The ‘X’ ring is the size of a dime”.
Five Shots at 300m that Could Fit under a Quarter
Robert Whitley took the photo below at the Marine’s Quantico, VA, Precision Weapons Section facility. The photo shows a target shot with Tyler’s upper at 300 meters. That’s a five-shot group the size of a quarter. Robert reports: “The Marines wouldn’t let me take the target home, because they planned to use the target to support their lobbying effort for funds to purchase new 6mmAR uppers.”
Trinidad State Junior College (TSJC) has launched an advanced Third-Year gunsmithing program at the school’s Trinidad, Colorado campus. This program augments Trinidad State’s respected two-year gunsmithing school, established in 1947. For the past 63 years, TSJC has built a world-wide reputation for the excellence of its program. Companies involved in the firearms industry have been quick to hire TSJC’s gunsmithing graduates. The new third-year program is an elite school, open to the top 25 percent of graduates from all gunsmithing schools in the nation.
The Advanced Third-Year Gunsmithing Program will be directed by Tom ‘Speedy’ Gonzalez, an innovative smith and Benchrest Hall of Famer. Speedy observed: “At the grand opening (of the new program), we’re pleased to have the President of the NRA attending, along with [Brownell’s President] Pete Brownell and the governor of Colorado.” Trinidad Interim President Felix Lopez explained: “The goal of the third-year gunsmithing program is to prepare its graduates to be ready for employment directly out of school.” Dr. Sandy Veltri, TSJC’s VP of Student/Academic Affairs added: “This third-year program will allow our students to gain entrepreneurial skills that will make them not just successful gunsmiths, but savvy business leaders.”
Development of the third-year program began with conversations between the college and representatives from Brownells about the need in the industry for gunsmithing graduates who are not only accomplished gunsmiths, but who also understand the firearms business, including retail sales, inventory control, counter sales, customer service, and dealing with vendors and management. Pete Brownell, shared his vision for this program to reflect real world employment in a working gun shop environment. Brownells provided $250,000 in funding for facilities remodeling plus needed equipment for the new retail-repair facility, christened the “Brownells Trinidad American Firearms Technology Institute”.
The first class of third-year students will experience the hard work and challenges of starting up a small business under the guidance of TSJC gunsmithing instructor Speedy Gonzalez. Gonzalez, a member of the Benchrest Hall of Fame, spent 30-plus years building precision rifles before coming to TSJC to “pass on his knowledge of gunsmithing to the next generation of gunsmiths”.
“Our intent is to open and operate a real-life gun shop with third-year students who will provide top quality gun repair, parts, and services for gun owners and collectors and hunting and shooting sports enthusiasts. We will offer retail, repair, blueing, reloading, and we even plan to do some light manufacturing”, said Gonzalez. The shop will maintain regular hours to serve local customers, including shooters from the nearby NRA Whittington Center in Raton, NM.
Additional ‘Gunsmithing Business Practices’ and ‘Gunsmithing Shop Management’ modules will be taught year-round by experts directly involved in the industry. Gunsmiths already employed and even gun shop owners/managers can sign up for modules of particular interest. In addition to the original two-year Gunsmithing Program and the new third-year program, TSJC offers short-term summer courses designed for anyone interested in learning gunsmithing. To learn more about gunsmithing programs at Trinidad State Junior College, visit www.TrinidadState.edu, or call Lynette Bates at (719) 846-5650.
The Smith & Wesson model 329 PD weighs only 25.1 ounces total, unloaded. Why one would want to shoot “full-house”, high-pressure loads through such a light gun puzzles this Editor. For a carry gun, lower-pressure .44 Special loads seem more appropriate. Smith & Wesson makes a variety of heavier, all-steel handguns chambered in .44 Magnum. If I was to shoot a steady diet of full-power .44 Magnum loads through a revolver, give me a gun with a solid steel frame, such as the classic S&W model 29. After seeing these shocking kaboom photos, when shooting true Magnum loads through a Scandium-framed revolver I would nervously ask myself the question famously posed by Clint Eastwood’s Dirty Harry: “Do I feel lucky?”.
Do Mr. Beggs’ guns shoot? Absolutely. We had the chance to visit Gene in Odessa. We shot both the 220 Beggs-chambered rifle, and its 6mm Beggs-chambered cousin. Both rifles are nearly identical, though the Heavy Varmint-weight 220 has a longer, 27″ barrel compared to 22″ for the Light Varmint 6mm.
From what we could tell during our short visit, the 220 Beggs is easy to load for, and performs exceptionally well with either turned (.250″) or no-turn necks. The recoil was noticeably less than a 6mm PPC, making the gun a joy to shoot. This round, we felt, could also be an outstanding varmint cartridge. The velocity is there, and we don’t think any other 22-caliber varmint cartridge is going to beat it for inherent accuracy.
Brownells’ 4th Annual 
The Advanced Third-Year Gunsmithing Program will be directed by Tom ‘Speedy’ Gonzalez, an innovative smith and Benchrest Hall of Famer. Speedy observed: “At the grand opening (of the new program), we’re pleased to have the President of the NRA attending, along with [Brownell’s President] Pete Brownell and the governor of Colorado.” Trinidad Interim President Felix Lopez explained: “The goal of the third-year gunsmithing program is to prepare its graduates to be ready for employment directly out of school.” Dr. Sandy Veltri, TSJC’s VP of Student/Academic Affairs added: “This third-year program will allow our students to gain entrepreneurial skills that will make them not just successful gunsmiths, but savvy business leaders.”
