The impressive new Lapua Rimfire Service Center opens in Mesa, Arizona on April 24, 2012. Patterned after the world-renowned Lapua Service Center in Schönebeck, Germany, this facility gives American shooters the same opportunity to test various types and lots of rimfire ammunition, in their own firearms, under ideal conditions. This assures that customers can purchase not only the best type of ammunition for his or her particular rifle, but also the specific lots of ammo that perform best. Experienced competitive rimfire shooters know that the ability to select a particular lot of ammunition that performs best in their firearm(s) means a world of difference in a match.
Until now, the ability of a shooter to do this vital testing was dependent on the small quantities of ammunition of various lots on hand, generally without any guarantee that a vendor could provide more of whatever lot turned in the best results. Lapua will maintain an inventory of approximately two million rounds of rimfire ammunition on site — a wide variety of different types and grades, and many different lots. Lapua states that: “Our goal is that you, the shooter, will be able to purchase sufficient quantities of the best ammo for your needs. In future matches, you’ll be able to know that the ammo you take to the line is truly the very best.”
CLICK “PLAY” to HEAR Adam Braverman TALK about Lapua’s New Arizona Rimfire Test Center:
High-Tech Electronic Targets in 100m Test Tunnel
At the heart of Lapua’s operation is a new 100m test tunnel. Fully instrumented with state-of-the-art Meyton electronic targeting systems, the Mesa facility offers the unique ability to test ammunition at both 50 meters and 100 meters, simultaneously with a single string. As the bullets pass through the screen at 50 meters, a group will appear on the first targeting screen. As the bullet continues its flight downrange, it will also be picked up on a second screen at the 100 meter line. This approach allows the shooter to see, instantly, which ammunition performs best at both 50m and 100m distances.
Shooters are encouraged to visit the new Rimfire Service Center. Testing is by appointment only, with a $50.00 range fee. For more information, visit www.Lapua.com or email lapua [at] nammoinc.com. The Lapua Rimfire Service Center is located at 4051 N. Higley Road, Mesa, AZ 85215, on the grounds of Nammo Tactical Ammunition. The Lapua Service Center, just 20 miles from Phoenix Sky Harbor Int’l Airport, is easy to reach by major roadways. Not far away, in the general Phoenix area, you’ll find a wide variety of hotels, restaurants, golf courses, plus the outstanding Ben Avery Shooting Range.
Panteao Productions has just released Make Ready with James Gilliland: Long Gun Basics, a $49.99 DVD. This is the first instructional video in the Make Ready series on long range precision shooting. Host James Gilliland, founder of Shadow 6, is a former United States Army Ranger. While serving in Ramadi, Iraq, Gilliland was recognized for engaging an enemy combatant with a M24 SWS at a range of 1250 meters with a single round, setting a record for the 7.62mm NATO cartridge. In this video Gilliland takes you step by step through ammo and caliber selections, bolt gun and gas gun choices, optics, rifle assembly, initial cleaning, pre-fire check, precision shooting fundamentals, building your dope book, accessories, and more. Whether you use a bolt gun or semi-auto gas gun, this video does offer some good basic tips on setting up your gun and mastering the fundamentals of accurate tactical shooting. It will have limited usefulness to benchrest shooters.
If you want to learn how to shoot accurately at very long-range, one of the very best places to learn is the Williamsport 1000-Yard Benchrest School. The Fifth Annual Benchrest School will be held April 27, 28 and 29 this year. There are still a few slots available for this year’s sessions. Classes, taught by top 1K shooters, are held at the Original Pennsylvania 1000-Yard Benchrest Club Range, one of the best 1K ranges in the country.
Prospective students will be taught all aspects of long range benchrest shooting from some of the most skilled marksmen in the country. All areas are covered from load development, precision reloading, bench skills, and target analysis. Much time is spent at the loading bench and on the firing line.
If you’re interested, you need to contact the school directors right away. While these Benchrest schools typically sell out, as of 3/24/2012, there were still a few student slots available for the late-April class session. If you want to grab one of the remaining slots for the 3-day school, don’t hesitate. For more information or to sign up for the 2011 1000-Yard Benchrest Class this April, contact School Director Frank Grappone, or visit the Williamsport website, PA1000yard.com.
To see what the 1K Benchrest school is like, watch the slide show/video below, produced by Sebastian Reist, an alumnus of the 2009 Williamsport 1000-yard BR school. Sebastian, a talented professional photographer, captured the highlights of his Williamsport 1K training weekend:
The Winter 2012 Issue of the CMP’s On The Mark eZine is now available for downloading as a PDF file. You can download this issue, and previous issues, by logging on to the CMP’s On the Mark webpage. The Winter 2012 Issue includes articles on the 2012 U.S. Olympic Team Trials for Airgun, the 2012 Camp Perry Open, Learning to Compete Successfully, Mind Over Matter (Mental Training), and much more.
CMP 2012 Summer Air Rifle Training Camps and Clinics
Each summer the Civilian Marksmanship Program (CMP) sponsors a popular series of Junior Air Rifle Camps and Clinics to teach intermediate and advanced rifle marksmanship skills to junior shooters and their adult leaders. There are seven camp sessions (plus two outreach clinics) scheduled for 2012. The first session starts June 11, and the last session begins July 30, 2012. Detailed information about the camps and how to apply to attend them are listed on the CMP website. All camp sessions are one-week-long, three-position air rifle camps, with the exception of the Outreach Clinics and the Advanced Standing Camp. These summer camps fill up quickly, so if you know a young shooter who wants to attend, be sure he or she submits an application soon. Most of the camps cost $230.00 for the week. For additional information, please contact Sommer Wood, CMP Junior Rifle Camp Director by emailing swood [at] odcmp.com.
Here, from the National Shooting Sports Foundation (NSSF), are eight (8) Free Targets that can be downloaded as PDF files and printed. All targets are available as PDFs and print on standard 8.5″ x 11″ paper. In the future, other targets may be posted on the NSSF Target Page. Want more FREE targets? Visit AccurateShooter.com’s Target Archive to access dozens of FREE, printable target designs, including load-testing targets, varmint targets, NRA bullseye targets, and fun targets.
Click a target to view and print. Right-click and ‘Save As’ to save PDF to your computer.
Intro Training Programs in CA and FL
More than 300 first-time shooters came out to six ranges in California and Florida this past weekend to attend NSSF’s First Shots events. The 20 filled-to-capacity seminars in these two areas served as yet another demonstration of the growing interest in gun ownership across America. “[We give] a sincere thank you to the ranges, their staff, volunteers and participants for making these events a huge success,” said Tisma Juett, NSSF’s First Shots manager. “First Shots also thanks Remington for providing all of the .22 ammo and Birchwood-Casey for the Shoot N See targets.”
Florida ranges offering First Shots Programs included: Hollywood Rifle & Pistol Club (Dania Beach), Arizona Shooting Range (Fort Lauderdale), and National Armory (Pompona Beach). California ranges that held events were Sacramento Valley Shooting Center (Sloughhouse), El Dorado Shooting Range (El Dorado), and United Revolver Club (Sacramento). Learn more about First Shots at NSSF.org/firstshots.
Story tip from EdLongrange. We welcome reader submissions.
David Tubb’s impressive 2-disc DVD, “The Art & Technique of the Modern Match Rifle”, is a great resource for any position shooter. This 2-disc DVD provides over 4.5 hours of instruction and shooting demonstrations. We’ve watched the entire video and can assure you that it is excellent. Novice High Power and prone shooters who apply David’s methods should definitely improve their scores.
David has included highlights from that DVD in a shorter promo video. While the shorter video is a sales tool, it’s very informative in its own right. Watch the video and you’ll learn a great deal just by watching how David shoulders his rifle, and how he adjusts and maintains his shooting position. David shows examples of prone, sitting, and standing positions. In the short “trailer”, David also provides helpful tips on adjusting sights, and placing the spotting scope.
If you shoot Service Rifle, High Power, or prone, you can benefit from watching this short sampler video embedded above. The full 2-disc DVD is available for $49.95 from Creedmoor Sports or DavidTubb.com. With over 4.5 hours of content, the DVD covers all the across-the-course positions, the set-up and use of aperture sights and diopters, High Power and long range targets, the approach method in offhand, proper placement and use of spotting scopes. The DVD includes bonus footage of David shooting strings in all of the across-the-course positions. (NOTE: Creedmoor Sports is running a February DVD Special for a few more days — Buy two (2) DVDs and get a third for 10% off.)
$24.95 DVD Shows How to Set-Up and Maintain Tubb 2000 Rifle
If you want a High Power match rifle that works brilliantly for all positions, definitely consider the Tubb 2000, aka the T2K. Yes it’s very expensive, but since the year 2000, when the T2K was introduced, this design has won more High Power National Championships than any other bolt-action rifle. The video below showcases features of the T2K that allow it to perform so well in all High Power disciplines. With the T2K’s inline, low-profile action, the shooter can cycle the bolt without raising his head off the stock. That’s a huge benefit for the competitor, particularly in rapid-fire stage. Other tubeguns, such those built on Eliseo (CSS) chassis kits, share this quality, but the T2K also has an extremely easy-to-manipulate bolt (and a superb Anschütz trigger). Watch how quickly and easily David can cycle his T2K without upsetting his shooting position.
David has created an informative DVD about the Tubb 2000 rifle that shows how to assemble/disassemble the Tubb 2000 rifle, how to custom-fit the T2K to the shooter, and how to set up the adjustable buttstock for different shooting positions. This Tubb 2000 (T2K) DVD is available for $24.95 from DavidTubb.com.
Tim Claunch (aka tclaunch) recently put on an amazing display of precision shooting. At an MSSA 600-yard Benchrest Score match in Memphis, TN, Forum member Tim shot six targets in a row, with an average 5-shot group size of 1.677″. Tim’s stellar performance began with a two-target shoot-off for club Shooter of the Year honors (he won). Then Tim shot four more targets as part of the club’s regular 4-target score match. NOTE: this is NOT an official six-target match result. The actual match that day was four (4) targets only, and Tim’s Agg for those four was about 1.8″, still darn impressive. No one is claiming any records here. Still give credit where credit is due — Tim put together six targets in a row, in competition, averaging 0.267 MOA for all six. Tim’s small group (of the six) was 1.351″ and his large group was 2.088″. That shows amazing consistency. This is spectacular shooting by any measure*.
Tim tells us: “I can check off one of the items on my ‘bucket list’ now — shooting a sub-two-inch Agg. We shot our monthly match here in Memphis at our awesome MSSA range. Though this was a score match, and the first two targets were part of a club shoot-off, I wondered about the average group size of all six. We measured all six targets I shot in sequence on Sunday. I was some kind of happy when I saw it was a 1.677″ 6-target average. That Bartlein and the .140″ FB BRX reamer are a good match. I used Varget with Berger 105gr VLDs and CCI 450 primers. I had never Agged under two inches before in my life (the 4-target Agg was 1.8″). Sure was nice to do it at home the first time.”
Tim shoots a 6mm BRX Light Gun with Shehane ST1000 Tracker stock, Borden Rimrock BR action, and Bartlein 6mm cut-rifled barrel. He uses a Leupold 45X scope in Burris Signature Zee rings sitting on a +20 MOA rail. Tim jokes: “People might laugh at my cheapo Burris rings. Well I guess those Signatures hold zero just fine.” Tim tried a power-booster lens on his Leupold for a while, but this altered eye relief, producing the occasional smack in the forehead. Not surprisingly, Tim removed the booster.
Borden Action with Dwight Scott Bolt and Firing Pin Upgrade
The action is a Borden Rimrock BR dual-port. “This action is smooth, and it allows me to rip ‘em when the conditions are good. For these six targets I shot fast.” The Borden action has some interesting mods: “The firing pin and bolt body were re-worked by Dwight Scott. He has a weight of pin to power of spring he worked out with Tony Boyer. I could tell a significant difference in performance.”
For better target resolution, click the gear-shaped icon and select 480p playback.
The stock is a Shehane fiberglass ST1000 Tracker bedded by TM Stockworks (Tom Meredith). The metalwork was done by Stephen Hall of Dyersburg, Tennessee. Tim reports: “I can’t say enough about this highly-talented guy. He’s a great smith and a great point-blank benchrest shooter himself. I’ve had four chambers cut by him and couldn’t be happier”. The barrel is a 1.250″ straight contour, finished at 26″. That’s a bit shorter than you’ll find on most 600-yard rigs these days, but Tim wanted some weight off the nose so he could add weight to the butt to balance the gun better (and still make weight). Tim raves about this Bartlein barrel: “Readers should not give up on maybe that next barrel being the one barrel a guy gets in a lifetime. I have tried all the cut-rifling barrel-makers, but I’ve recently gone to Bartlein. Based on my ratio of great-shooting barrels to average barrels I am there to stay.”
Tim’s Accurate Reloading Methods Tim’s reloading procedures could rightly be described as the “relentless pursuit of perfection”. After two firings, once “the brass has settled down and conformed to the chamber”, Tim anneals his cases. He then re-anneals after EVERY subsequent firing. The brass he shot at the MSSA match had eight firings, so it had been annealed many times. Tim uses current-generation (blue box) Lapua 6mmBR brass, and he lightly turns his necks for an 0.269″-necked chamber. Tim points his bullets, but does not trim them: “These were pointed, no trimming, just point and shoot. I have shot a few of the new Berger hybrids, but I keep going back to the Berger VLDs.”
Superior accuracy, Tim believes, requires ultra-consistent neck tension. Tim uses a K&M arbor press with a force gauge. If the needle shows any notable variance in seating force, Tim will pull the round apart, run a mandrel in the neck, resize the neck, and re-seat the bullet. If the bullet still doesn’t seat smoothly, he won’t shoot the round for record. Tim is also particular about seating depth: “I measure every loaded round base to ogive using a comparator. All my match ammo is held to plus/minus .0005″ (i.e. one thousandth total spread) in base to ogive length. Yes, this is possible if you anneal regularly and monitor bullet-seating force carefully. If you can’t hold .001″ [base-to-ogive] tolerances with good bullets, that’s probably because of inconsistent neck tension.”
Secret of Success — Improved ‘Bench Manners’ and Gun Handling
Tim had a personal break-through not so long ago that improved his accuracy dramatically. Previously he got down on the gun, and would use some cheek pressure. But he noticed some erratic horizontal in his groups. Tim changed his shooting position, getting his head completely off the stock. The change worked: “After cleaning up my ‘bench manners’ and getting my head off the gun, my groups started shrinking. It was a real eye-opener.” Tim shoots with minimal hand contact (“just touching”) on the stock, and he doesn’t pin the gun to the stop. Tim explained: “I run the gun up to touch the stop before each shot, but I don’t use any shoulder pressure. I don’t push on the gun at all.”
You can learn more about Tim’s amazing six-target display of accuracy in this Forum thread. Registered Forum members can post questions about Tim’s rifle and the shooting conditions, and Tim will answer them when he has the opportunity.
* Just for comparison sake, the NBRSA official Light Gun 600-yard, 6-Target (30-shot) Agg record is 2.092″ (Robert Hoppe, 2006). The IBS official Light Gun 600-yard, 4-Target (20-shot) record is 1.6068″ (Sam Hall, 2011). The IBS does not list a LG 6-target Agg record for 600 yards.
Imagine if your shooting club organized a public range day and 1500 people attended (including hundreds of first-time shooters). Now imagine that taking place in “gun-phobic” California. Well, believe it or not, this really happened when the San Luis Obispo Sportsmen’s Association (SLOSA) hosted its first annual SLOSA Expo. The January event drew more than 1,500 attendees who shot nearly 40,000 rounds while trying out a variety of shooting disciplines under the guidance of 150 volunteers. As a model event, the SLOSA Expo demonstrates how successful a well-organized Range Day Promotion can be.
Expo Introduces Hundreds of New Shooters to the Sport
The purpose of the Expo is to raise gun-safety awareness and expose non-shooting members of the public to what the shooting sports have to offer. The Expo fulfilled its charter by drawing in 63% new shooters to the SLOSA range. In fact, one-quarter of Expo participants fired their first shots ever.
At the SLOSA Expo, personal instruction, ammunition and loaner guns were provided at no cost to attendees — thanks to a grant from the National Shooting Sports Foundation (NSSF). Men, women and children of all ages came from as far as 100 miles away to participate in the free fun event. Visitors could try a variety of disciplines including: archery, sporting clays, action pistol, black powder, cowboy action, and much more.
“This one-day event did more to promote the 2nd Amendment and the range itself than 20 years of the range simply being open.” Said Kevin Wooley of Calguns.org. “Kudos to the volunteers.”
“We were elated at the interest and response from the community.” said Art Leach, President of SLOSA. “We expected no more than 500 people to come out for the Expo and were overjoyed to reach over 1,500 guests before 2 o’clock”. One reason for the event’s high attendance is the SLOSA Range’s unique location, just a few hundred yards from scenic California Highway 1.
“This is the first event of this magnitude I’ve heard of ever happening” said Maddy Cooley, Resources Director at SLOSA and author of the Expo grant. “The Expo will forever change the way firearms are viewed by [California] Central Coast residents.”
Story tip from EdLongrange. We welcome reader submissions.
Effective hearing protection is a must whenever you are shooting firearms or when you are in the vicinity of gun-shots. For ultimate protection, we recommend a good set of tapered foam earplugs, topped by ear-muffs. However, there are situations when you may prefer lighter-weight hearing protection that can be quickly removed. For example, if you are standing well behind the firing line as an observer, or if you are working as a rangemaster or waddie some distance away from the shooters.
In addition to traditional ear plugs and ear-muffs, new band-style protectors provide a third sound-blocking option. Howard Leight, a top name in the sound-protection business, now offers the “Quiet Band”, a device with soft foam plugs attached to a plastic band worn around the neck. This “Quiet Band” product is comfortable, easy to deploy, and surprisingly effective.
Three Quiet Band Models
There are three (3) types of Leight Quiet Band® sound protectors. We prefer the QB2 Supra-aural model (item QB2HYG, NRR 25). As shown in the photos, the NRR 25-rated QB2 positions cone-shaped foam pads next to the ear openings and holds them there with light pressure from the orange-colored band. There is also an Inner-aural version (item QB1HYG, yellow band, NRR 27), and a Semi-aural model (item QB3HYG, red band, NRR 21). Our preferred QB2 Supra-aural (orange band) model is just as comfortable as the QB3 (red band) version, and offers much better protection. The QB1 Inner-aural (yellow band) model requires that you place the ear buds in the ear canal, so it’s not really any easier to use than conventional earplugs. That’s why we like the QB2 Supra-aural model best of all. Other users agree. Here’s what two QB2 owners had to say:
“I first saw these used by Hickok45 on Youtube and he talked positively about them. I got two and gave them a try. At first, I didn’t think they were going to work very well. After some fiddling, I found they work pretty darn good. With my ears, they fit the best if the band starts on top of my head, I insert the plugs then rotate the band behind my head. PRESTO, perfect fit. Shooting the 9mm and 12 gauge out back was comfortable with no ringing afterward. [They are] small and easy to transport — just throw in the range bag. Yet, they are big enough to keep around your neck out of the way[.] I can sit these Howard Leights down on the shooting bench without worrying about them getting dirty since the band is curved, placing the plugs in the air. I highly recommend them to anybody needing banded hearing protection.” — Tom W.
“Great for woodworkers — These are lightweight AND very effective at reducing noise. When not in use the band hangs loosely around your neck, out of your way completely. Very cost effective for a great product!” — Sheri D.
Quiet Band® sound protectors can be purchased from many online vendors for under $5.00 per set, which includes a spare pair of ear buds. Amazon.com has the Leight QB2 (by Sperian) for just $2.50 per set, while Enviro Safety Products currently sells the QB2 for $3.87 per set. Replacement ear buds are available and sold by the pair. Ten-unit Bulk packs are also available for $35.00 with free shipping.
The impressive new Lapua Rimfire Service Center opens in Mesa, Arizona on April 24, 2012. Patterned after the world-renowned Lapua Service Center in Schönebeck, Germany, this facility gives American shooters the same opportunity to test various types and lots of rimfire ammunition, in their own firearms, under ideal conditions. This assures that customers can purchase not only the best type of ammunition for his or her particular rifle, but also the specific lots of ammo that perform best. Experienced competitive rimfire shooters know that the ability to select a particular lot of ammunition that performs best in their firearm(s) means a world of difference in a match.
Panteao Productions has just released 
If you want to learn how to shoot accurately at very long-range, one of the very best places to learn is the 
The 
CMP 2012 Summer Air Rifle Training Camps and Clinics
Intro Training Programs in CA and FL
David Tubb’s impressive 2-disc DVD, “The Art & Technique of the Modern Match Rifle”, is a great resource for any position shooter. This 2-disc DVD provides over 4.5 hours of instruction and shooting demonstrations. We’ve watched the entire video and can assure you that it is excellent. Novice High Power and prone shooters who apply David’s methods should definitely improve their scores.
Tim’s reloading procedures could rightly be described as the “relentless pursuit of perfection”. After two firings, once “the brass has settled down and conformed to the chamber”, Tim anneals his cases. He then re-anneals after EVERY subsequent firing. The brass he shot at the MSSA match had eight firings, so it had been annealed many times. Tim uses current-generation (blue box) Lapua 6mmBR brass, and he lightly turns his necks for an 0.269″-necked chamber. Tim points his bullets, but does not trim them: “These were pointed, no trimming, just point and shoot. I have shot a few of the new Berger hybrids, but I keep going back to the Berger VLDs.” 
Imagine if your shooting club organized a public range day and 1500 people attended (including hundreds of first-time shooters). Now imagine that taking place in “gun-phobic” California. Well, believe it or not, this really happened when the San Luis Obispo Sportsmen’s Association (SLOSA) hosted its first annual 
At the SLOSA Expo, personal instruction, ammunition and loaner guns were provided at no cost to attendees — thanks to a grant from the 
Three Quiet Band Models
“I first saw these used by Hickok45 on Youtube and he talked positively about them. I got two and gave them a try. At first, I didn’t think they were going to work very well. After some fiddling, I found they work pretty darn good. With my ears, they fit the best if the band starts on top of my head, I insert the plugs then rotate the band behind my head. PRESTO, perfect fit. Shooting the 9mm and 12 gauge out back was comfortable with no ringing afterward. [They are] small and easy to transport — just throw in the range bag. Yet, they are big enough to keep around your neck out of the way[.] I can sit these Howard Leights down on the shooting bench without worrying about them getting dirty since the band is curved, placing the plugs in the air. I highly recommend them to anybody needing banded hearing protection.” — Tom W.
