Sometimes simpler is better when it comes to targets for fun shooting and load testing. While we normally use test targets from our Downloadable Target Page, it’s sometimes easier to just use high-visibility adhesive target dots.
Hi-Viz Stick-On Dots in Assorted Colors and Diameters
You can order 1″ target dots in bulk from Data-Labels.com. Many colors are available including fluorescent (hi-viz) Red, Green, Orange, and Yellow. These are bright and easy to see even in fading afternoon light. A pack of twenty (20) sheets (1260 dots total) costs just $5.97 (that works out to $4.74 per thousand). For the 1″-diameter stick-on dots you get 63 dots per sheet. Larger, 1 2/3″-diameter fluorescent dots are also available from Data-Labels.com in 20-sheet packs for $5.97, with 24 large dots per sheet (480 dots total). If you want larger, 2″-diameter dots, sheets with 400 Hi-Viz dots are currently on sale for $5.97 per 20-pack.
If you prefer smaller, 3/4″-diameter circles, Staples.com sells packs with 1008 adhesive dots for $3.64 to $8.39 per pack. Colors include Neon Red (item 538041), Neon Orange (item 538116), Neon Yellow (item 538090), and Neon Green (item 538066), as well as dark blue, light blue, yellow, and dark green. We recommend the Neon Red for most uses, or the Neon Yellow for use on a black background. For $4.41 Staples sells a “Rainbow Pack” (item 297705) with four assorted colors: red, light blue, green, and yellow.
Half-Inch Fluorescent Dots for 100-200 Yards
For close-range work, you may prefer 1/2″-diameter dots. Forum member Steve has found these at Uline.com. The 1/2″ dots are available in a wide variety of colors including fluorescent Red, Pink, Yellow, and Green. Price is $12 for a roll of 1000 dots (item S-2063).
SHOT Show 2014 kicks off in two weeks in Las Vegas. While at SHOT Show next month, we plan to get the “inside scoop” on new bullet designs from Berger, Hornady, Lapua, Nosler and Sierra.
At SHOT Show 2012 we chatted with Berger Ballistician Bryan Litz about Berger’s popular line of Hybrid bullets. Berger now offers a wide range of Hybrids in multiple calibers and weights. In fact, for .30-Caliber shooters, Berger now offers seven different Hybrid match bullets, with weights from 155 grains up to 230 grains. Two .338-caliber OTM Tactical Hybrids were introduced in 2012 (a 250-grainer and a 300-grainer).
Bryan tells us: “The hybrid design is Berger’s solution to the age old problem of precision vs. ease of use. This design is making life easier for handloaders as well as providing opportunities for commercial ammo loaders who need to offer a high performance round that also shoots precisely in many rifles with various chamber/throat configurations.”
For those not familiar with Hybrid bullets, the Hybrid design blends two common bullet nose shapes on the front section of the bullet (from the tip to the start of the bearing surface). Most of the curved section of the bullet has a Secant (VLD-style) ogive for low drag. This then blends in a Tangent-style ogive curve further back, where the bullet first contacts the rifling. The Tangent section makes seating depth less critical to accuracy, so the Hybrid bullet can shoot well through a range of seating depths, even though it has a very high Ballistic Coefficient (BC).
In the video we asked Bryan for recommended seating depths for 7mm and .30-Caliber Hybrid bullets. Bryan advises that, as a starting point, Hybrid bullets be seated .015″ (fifteen thousandths) off the lands in most barrels. Watch the video for more tips how to optimize your loads with Hybrid bullets.
Do you need bottom metal for your Remington-footprint action (factory or custom) or a Winchester action? Then visit PacificToolandGauge.com pronto. Right now PT&G has bottom metal marked down, with savings up to 42%. Choose from a variety of styles. There are hinge-mount, flush-mount, and magwell-type versions offered, starting at just $75.00, a 42% savings over the $129.00 regular price. If you want one of these bottom metal sets, act quickly — the Special concludes at 11:59 pm on December 28, 2013.
Sale Tip from EdLongrange. We welcome reader submissions.
E. Arthur Brown Company, Eabco.com, has been a faithful sponsor of this site for many years. Right now, EABCO is giving back to its customers, with a special 15% Off discount on all inventory in stock — that’s right, all inventory on the shelves (no back-orders). Eabco carries a wide selection of shooting accessories, reloading tools and dies, plus a full line of reloading components, including Lapua brass, and bullets from Barnes, Berger, Hornady, Lapua, Nosler, and Swift. EABCO also offers popular rimfire and centerfire ammunition. This special year-end Inventory Reduction Sale is good through 8:00 am CST on December 30th, 2013. So you have two more days to enjoy the 15% Store-wide Savings. To qualify for the 15% discount, use Promo Code 15EAB at check-out.
Nightforce Optics has introduced a new medium-magnification, second-focal plane scope for hunters and tactical shooters. Described as “the most affordable Nightforce riflescope [offered] to date”, the all-new 4-14x56mm SHV will sell for $995.00 (non-illuminated model) or $1195.00 with an illuminated reticle. The “SHV” stands for ShooterHunterVarminter™, reflecting this scope’s versatility — it can be used for a wide variety of applications. The SHV has plenty of travel for long-range use: 100 MOA of elevation adjustment and 70 MOA of horizontal (windage) travel. Two reticle options will initially be offered, the basic IHR (Int’l Hunting Reticle) with floating center cross-hair, and the popular MOAR reticle with 1-MOA vertical and horizontal hash marks.
The 4-14 SHV scope represents a new direction for Nightforce. The optics-maker kept the price under $1000.00 by “limiting some options, offering simpler controls, and using a less complex manufacturing process.” Nightforce said the goal with the SHV was to offer a scope priced “within the reach of a wider range of hunters and shooters who don’t need the ‘overbuilt’ characteristics of our NXS™ series, most of which were originally created to withstand actual combat conditions.”
The 4-14x56mm SHV weighs 26.8 oz. for the basic version, and 28.5 oz. for the illuminated model. Full specifications are listed below. CLICK HERE for 2014 Nightforce Catalog.
The GAP Grind is one of the nation’s premier tactical matches. The 20-minute YouTube video embedded below features highlights of the 2013 GAP Grind, hosted this fall at the K&M Precision Rifle Training facility near Crestview, Florida. It’s interesting to see the many types of rifle systems used at this match — Tubeguns, Aluminum Chassis rifles, AI models, and customs built on fiberglass stocks. These are all used in a dizzying variety of shooting positions and scenarios. Ninety (90) competitors fired over 15,000 rounds during this year’s GAP Grind.
The video employs multiple camera angles, giving you an “insider’s view” of the match. Starting at 16:30 you’ll see an interesting sequence — the Bartlein Steel Safari, with multiple steel targets engaged at progressively longer distances. Watch carefully and you’ll see bullet trace and the “splash” of impact. (This sequence is also previewed at the 2:30 time-mark — watch the trace).
Watch 2013 GAP Grind Tactical Match Video
The GAP Grind has been described as “a high tempo match with minimal ‘down-time’ between stages”. Competitors use rifle and pistol in a variety of scenarios, with pistol stages from 5 to 40 yards, and rifle engagements out to 1000 yards. Targets — an assortment of steel, reactive, paper, and automated moving targets — vary in difficulty based on the shooters’ position, distance, and time allotted. Most stages involve time limits, or required movement, or other “stressors” that heighten the difficulty (and get the heart pumping). Scoring employs Precision Rifle Series (PRS) guidelines in order to reward the most consistent shooters.
Here’s an important reminder for readers who have digital keypad entry systems on their gun safes. If you have a safe with an electronic keypad, you should replace the battery every year as a precautionary measure.
I have one safe with a Sargent & Greenleaf (S&G) keypad. I went to get into the safe yesterday. Punched in the combination, but all I got was a rapid “beep, beep, beep, beep” after I finished the last combination entry. I tried again to ensure I entered the combination correctly (I did). But again, the locking system responded with multiple rapid beeps indicating something was wrong. And the safe would not open. Now I was worried….
I popped out the battery holder (which slides in from the bottom of the keypad housing on the door). I removed the battery and tested it with a volt-meter. The year-old Duracell 9v only registered 6.1 volts.
Low voltage was the problem. I went down to the store and got a couple new 9V batteries. I tested the new batteries and both measured 9.4 volts output. I slipped one of the new 9V batteries into the keypad housing, punched in the combination and everything worked OK again. Eureka.
Most electronic locks for safes WILL “remember” the combination for a period of time even when the battery is low (and the keypad’s “brain” should retain the combination when you remove the battery for replacement). However, a dead battery, or extended periods of low voltage can give you problems. Don’t rely on wishful thinking…
If the battery on your safe is more than a year old, or if it is not giving you the right voltage, replace it today!
My Sargent & Greenleaf (S&G) keypad takes one (1) 9v battery. The version below takes two. Note how the battery compartment slides in from the bottom:
Brownells is teaming up with Shooting USA to give viewers ideas for gunsmithing projects they can accomplish at home. Shooting USA will air six original Brownells Home Gunsmithing segments, featuring John Scoutten guiding viewers through the projects. The projects range from applying a camouflage paint job on a shotgun (Episode 1) to upgrading an AR-15 trigger.
The first Shooting USA episode featuring a Brownells Home Gunsmithing Segment aired on Christmas Day, December 25, 2013. The remaining five new episodes, plus re-airs, will run throughout 2014. Episode 1 covers application of a Camouflage finish to a shotgun. The step-by-step stages of this process are illustrated on the ShootingUSA Website.
Viewers of the show are encouraged to visit the Shooting USA page at Brownells.com to check out the Brownells products featured during the segments. “John has done a number of projects in the past for our viewers, and they like seeing what they can do themselves,” said Shooting USA Executive Producer, Jim Scoutten. “But with this new series, they’ll be backed-up by Brownells’ 16-man staff of expert gunsmiths, ready to take their call, if they have any questions about the process. Nobody else provides that kind of support,” Scoutten said.
About Shooting USA Television
Shooting USA and Shooting USA’s Impossible Shots anchor the Wednesday night Gun Sports and Shooting Block on Outdoor Channel. The shows appear 52 weeks of the year, reaching 40 million enthusiast households. Jim and John Scoutten have been working together since launching the first TV gun sports show in 1993.
Merry Christmas and Happy Holidays to all our readers and especially our 23,500 Forum Members. This marks our ninth Christmas “in business”, and the site keeps growing each year. AccurateShooter.com (and 6mmBR.com) are now accessed by over 130,000 unique users ever week. Part of the reason for that success is the knowledge, experience, and technical expertise that our contributing writers (and expert consultants) share with other shooters.
Unsung Heroes Deserve Recognition
I want to take this opportunity to acknowledge some guys who have really helped out with the site. Number one is JayChris. This dude has been a godsend — he’s a really smart IT guy (and a dedicated shooter) who enabled us to maintain multiple dedicated servers, while speeding up things with smart software upgrades. Also Thanks to Jeff Williams, our “Answerman” who helps Forum members resolve problems. I’d also like to thank our regular contributors: Boyd Allen, Vince Bottomley, Sam Hall, Mark LaFevers, German Salazar, and Robert Whitley. And special thanks to EdLongRange who researches leads for the Bulletin. These guys (and many others) have all contributed time and effort — all without asking a dime in return. I’d also like to thank Joe F. (aka “The Stig”), our designated “master trigger-puller”. When we need someone to wring out the Nth degree of accuracy in a rifle — Joe’s the man.
Thanks to Site Supporters and Sponsors
Finally, I’d like to thank all of you who have made donations (large or small) to the site this year. User support is very important. Donations help us grow the site and provide new services for our readership. We also want to express our appreciation for our many commercial sponsors — from large vendors such as Bullets.com, Graf & Sons, EABCO, Midsouth Shooters Supply, and Powder Valley to important product-makers such as Berger Bullets, Krieger Barrels, Lapua, and Nightforce Optics. We are all part of a very special community here at AccurateShooter.com — and we appreciate your support!
PrecisionRifleBlog.com recently published results from the most comprehensive field test of rangefinder binoculars ever conducted. It included virtually every product available in a variety of real-world scenarios, to see which had the best performance in the field in terms of both optical clarity and ranging capabilities. The results are based on over 10,000 data points collected from the field over 3 months of testing. Cal Zant, author of PrecisionRifleBlog.com, published a series of posts with exhaustive details about his optical and ranging tests and results, but we’ll hit the highlights here.
VOICE FILE: Click Button to Hear Cal Zant TALK about Rangefinder Binocular Test
Six of the models tested were binoculars, and the other two were monoculars. The Leupold monocular was included for reference, because many shooters have a 1,000-yard rangefinder similar to the RX-1000. The Vectronix Terrapin model was included as the control for ranging performance, because it is known to be an extremely accurate rangefinder (spoiler alert: it is). Cal provides a very detailed side-by-side spec comparison for these models in one of his posts.
Ranging Test Results
Each model was used to range 500+ times in a variety of scenarios from 25 to over 30,000 yards. The tests showed these models had similar performance at close and mid-range targets, but at 600 yards their performance started to diverge … so that is where most of the testing was focused.
The chart below summarizes the ranging performance found on the test targets in ideal conditions, which was from a sturdy tripod, at sunset, with 10+ mile visibility. The exact target shape and surroundings varied, but the targets were all approximately 2 MOA wide, highly reflective, and perpendicular to the rangefinder. Specifics on target dimensions, view from the ranging position, and target surroundings are given in the detailed ranging performance results post.
Vectronix is the leader of the rangefinder world, and that was proved once again in these tests. The new Leica Geovid HD-B wasn’t far behind them, with accurate ranging beyond 1 mile. The Zeiss Victory RF also had surgical precision off a tripod, although it had a reduced range compared to the Vectronix and Leica. The Bushnell Fusion 1 Mile also proved to be able to range targets out to their claimed max range of 1,760 yards.
PrecisionRifleBlog.com also tested the ranging performance of each model in bright lighting conditions, and offhand as well. The data from those tests also contained a few surprises. To determine how accurate each model really was, Cal Zant carefully analyzed the results from each model when aimed at precisely positioned, “known distance” targets. To see how those tests turned out, or learn more details about specific models, GO TO full results.
Optical Test Results
For the optics tests, Cal’s goal was to find an objective, data-driven approach to testing optical performance. What he came up with was placing eye exam charts from 600 to 1,400 yards with different size letters, and then recording what two different people could accurately read with each model. The data for each unit was summed into a single score so they could be ranked relative to how much detail the testers could make out. More specifics are provided regarding how the test was conducted and how scores were calculated in the optical performance results post. Here are the results from Cal’s data-driven approach:
The Leica Geovid HD-B edged out the other models for the top spot, with its completely new, Perger-Porro prism design. The original Leica Geovid HD, and Zeiss Victory RF also showed great optical clarity.
The Rest of the Story
Cal’s full series of posts is very informative. He’s done tons of analysis on the data, and summarizes it in several charts that provide a lot of insight. Cal is also in the process of publishing detailed reviews on each model, including notes he and the other testers compiled for each unit. They used them all — a lot, so they have a unique perspective on what’s good or bad about each. Find out more at the link below:
Hi-Viz Stick-On Dots in Assorted Colors and Diameters
Do you need bottom metal for your Remington-footprint action (factory or custom) or a Winchester action? Then visit 
The 
Here’s an important reminder for readers who have digital keypad entry systems on their gun safes. If you have a safe with an electronic keypad, you should replace the battery every year as a precautionary measure.
Merry Christmas and Happy Holidays to all our readers and especially our 23,500 Forum Members. This marks our ninth Christmas “in business”, and the site keeps growing each year. AccurateShooter.com (and 6mmBR.com) are now accessed by over 130,000 unique users ever week. Part of the reason for that success is the knowledge, experience, and technical expertise that our contributing writers (and expert consultants) share with other shooters.
