|
|
October 16th, 2013
Twice a year, select-fire fans head to the Knob Creek Gun Range in West Point, Kentucky, for the nation’s largest Machine Gun Shoot. A bi-annual event, tThe Machine Gun Shoot is typically held on the second weekend of April and October. The latest Machine Gun Shoot took place October 11-13, 2013. The highlight of every Machine Gun Shoot is the Saturday Night event, where scores of guns send regular and tracer bullets down-range. This year, an estimated 1.25 million rounds were expended during the October Night Shoot.

This October, Top Shot Season 4 Champ Chris Cheng was on hand to record the firepower. Chris writes: “About an hour before dark, folks are out on the range setting up all sorts of explosives while a crowd builds, anxiously awaiting what we all know is coming. The lights go out, and the next thing you know machine guns are going off for almost 20 straight minutes. This year’s October 2013 edition did not disappoint. Check out the video below — other than the beginning, my favorite part is at the 5:50 mark [when a Mini-Gun opens fire from the right].”
Click Triangle to Watch Knob Creek Machine Gun Shoot Video (Warning: Very Loud Audio)

 This photo of Knob Creek Gun Range is courtesy of TripAdvisor.
October 16th, 2013
Sebastian (“Seb”) of SEB Coaxial wanted a compact, transportable reloading press he could take to the range. So he made one himself, and it’s a beauty. Seb tells us: “The press is made from 7075 aircraft-grade aluminum, and it measures 9.5″ tall x 4.2″ wide x 1.5″ thick when folded. The press features a bronze bushing surrounding the main stem and a stainless threaded insert on the top for the screw-in dies”. Seb included a positive ‘stop’ between the cam units and the bottom body of the press. The lever arm is easily removable, as is the grip shaft. Seb used a golf ball for the grip, noting that “it’s comfortable to grip and looks funny”. Spent primers exit through a hole in the back of the press, Seb explains: “The main column has a hole drilled on the back (at an angle), so when the primer is punched it passes through the hole and out through the back.”

We have to say, this guy is a wizard with design and fabrication. And if you’re wondering — yes Seb is considering putting this press into production if there is enough interest. He is also planning to craft a small tray to go with the press.

October 16th, 2013

As you may know already, Bryan Litz of Applied Ballistics LLC has produced an excellent 3-Disc DVD set entitled Putting Rounds on Target. When one views the end result one can forget the hard work and tribulations that go into making such a production. Sometimes Mother Nature doesn’t cooperate when the crew is out at the range.
Bryan tells us:
“Filming for ‘Putting Rounds on Target’ proved to be a bit more challenging then we had expected. For this segment in the third disk, we packed up and set up everything over half a dozen times to keep the camera and shooting equipment dry as the sun played Peek-a-boo behind rain clouds. The chilled temperatures, required a lot of hot coffee, but the lack of restrooms made for a long day. In the end, it was totally worth it!
Watch Trailer Video of Putting Rounds on Target DVD Set


October 15th, 2013
Midsouth Shooters Supply now offers a handy aluminum platform, the Bench Topper, designed to help organize your shooting bench and provide additional working space. The Bench Topper, from Berry’s Manufacturing, is a sturdy platform that holds a loading press and storage bins in a raised position above your bench — effectively creating additional room for scales, trimmers, and component storage below. The $113.40 Bench Topper (Midsouth item 037-00191) can bolted to your bench, or it can be secured with C-Clamps, so the whole unit can be removed (or transported to the range.)

Berry’s Bench Topper is crafted from CNC-machined aluminum and powder-coated silver for durability. It comes with two aluminum hangers for adding plastic storage bins for bullets or brass. All fasteners are recessed for a clean work surface. NOTE: The Bench Topper must be assembled by the purchaser, and YOU MUST DRILL YOUR OWN HOLES for installation of your reloading press and any other devices you want to bolt to the top level. This requires a few minutes of extra initial set-up time, but this allows a secure, custom installation for any brand of reloading press. CLICK HERE for Bench Topper Assembly Instructions (PDF file).
|
Bench Topper Specs:
Top Plate:
6 x 20 x 1/4″
Bottom Plate:
10 x 20 x 1/4″
Height: 11.5 Inches
Weight: 12.5 Pounds |
 |
Product Tip from EdLongrange. We welcome user submissions.
October 14th, 2013
We like to recognize outstanding shooting accomplishments — this example by one of our Forum members from across the border in Canada. In a regional F-Class match, Gordon Ogg (aka ‘Ont001′) shot a 100-16V, which is believed the highest score shot in a match of this type in Canada. Gord hit all Fives for a perfect 100-point, 20-shot string of fire, with 16 in the V-Ring, the equivalent of the X-Ring in the USA. (A FIVE in Canadian scoring is the equivalent of a TEN in USA scoring.) Here is a photo of the official score card and one of the 3″-diameter Shot Indicators.

In our Shooters’ Forum, Gord Ogg explained how the 100-16V was accomplished:
I was shooting 7mm WSM ammo I had left-over from the U.S. Nationals and F-Class World Championships. The rifle proved it still had life left in it — it continued to make me look good. My first relay went well, with a 99-15V. On the second match, it was working very well and I had not realized ’til after the last shot and Jim, my scorekeeper, gave me the total, did I actually think it could actually be a record. All I can say is… it felt GOOD.
Due to predicted thunderstorms for the afternoon, the match director changed the course of fire from [three matches], to two [20-shot] matches. First match was unlimited sighters and 20 on score and the second was 2 and 20 in string fire. As the weather did continue to deteriorate, it was a wise decision, as we would not have made it through all three matches.
Is This a New Canadian Record?
Though Gord’s fellow shooters believe this was a “best-ever” F-Open performance in Canada, it does not appear to be one for the record-books. Gord tells us: “As the Mons Range Championship was a DCRA/ORA sanctioned match in Canada, and our National body does not have a ‘records’ section to compare for a Canadian F-Open record, at best it can be considered a Mons Championship Match record of sorts.” Still, Gord’s 100-16V (the equivalent of a 200-16X under USA scoring) is an impressive feat. The current United States NRA F-Open Record for 20 shots at 1000 yards is 200-15X which is shared by a number of people but first set by Danny Biggs.
October 13th, 2013
Get Official Targets, Target Centers, Pasters, Pit Supplies, and Training Targets
Looking for training targets, competition targets, or fun targets? Well Creedmoor Sports has what you need for NRA smallbore and centerfire competition (including target pasters). Creedmoor has the official targets for most popular NRA disciplines along with the “Target Repair Centers” (Bullseye overlays that save money compared to full-size targets). In stock now are official F-Class targets, High Power rifle targets, smallbore targets, pistol targets, and air rifle targets. Creedmoor also now carries Birchwood Casey Shoot-N-C targets and Hi-Viz Orange Target Spots®. When practicing with scoped rifles, we use the 1″ Target Spots at 200 yards, and the 3″ Target Spots at 600.
October 12th, 2013
We have good news and bad news for California gun owners and hunters. The good news is that California Governor Jerry Brown vetoed SB 374. The bad news is that Gov. Brown also signed AB 711 which bans the use of lead-containing ammunition for hunting. Gov. Brown surprised many people with his veto of SB 374, a sweeping ban on virtually all semi-automatic centerfire rifles with any kind of detachable magazine. Had it become law, SB 374 would have banned the sale and transfer of hundreds of rifle types, including many classic hunting rifles with 3- or 4-round flush-mount detachable magazines. In addition, SB 374 would have banned historic military rifles such as the M1 Garand, and M1 Carbine, which are prized by collectors and widely used in vintage rifle events and CMP shooting matches.
In his Veto Message, Gov. Brown stated:
I am returning Senate Bill 374 without my signature.
The State of California already has some of the strictest gun laws in the country, including bans on military-style assault rifles and high-capacity ammunition magazines.
While the author’s intent is to strengthen these restrictions, this bill goes much farther by banning any semi-automatic rifle with a detachable magazine. This ban covers low-capacity rifles that are commonly used for hunting, firearms training, and marksmanship practice, as well as some historical and collectible firearms. Moreover, hundreds of thousands of current gun owners would have to register their rifles as assault weapons and would be banned from selling or transferring them in the future.
I don’t believe that this bill’s blanket ban on semi-automatic rifles would reduce criminal activity or enhance public safety enough to warrant this infringement on gun owners’ rights.
Governor Brown Signs Eleven Bills Targeting Gun Owners
In addition to vetoing the expanded “assault weapons” ban, Brown vetoed six other bills relating to firearms: SB299, SB475, SB567, SB755, AB169, and AB180. Again, that sounds good. However, at the same time, Gov. Brown signed eleven other bills that will affect California gun owners:
SB 171 – Patient threats must be reported by psychotherapists to police within one day.
SB 363 – New penalties for storing loading guns where they may be improperly accessed.
SB 683 – Requires long gun owners to obtain safety certificates.
AB 48 – Bans magazine conversion kits increasing capacity.
AB 170 – Disallows organizational permits for “assault weapons”, and .50 BMG.
AB 231 – Criminalizes leaving a gun where child might use it without permission.
AB 500 – Imposes further rules on gun storage; expands DOJ background check times.
AB 558 – FFLs must provide Record of Sale to gun buyers.
AB 539 – Permits disallowed persons to temporarily transfer guns to FFL.
AB 711 – Bans lead ammunition for all hunting activities.
AB 1131 – 5-year gun prohibition for people who have revealed threat to psychiatrist.
Bill Banning Use of Lead-Containing Ammunition for Hunting
AB 711, the lead ammunition ban, will create real problems for California hunters as it is “phased in” over the next few years. There are no lead-free bullets readily available for many cartridge/caliber types. Critics of AB 711 have called this “a ban on hunting disguised as an ammunition ban”.
Summary of Key Provisions of AB 711:
Existing California law requires that nonlead centerfire rifle and pistol ammunition be used when taking big game with a rifle or pistol, as defined by the Department of Fish and Wildlife’s hunting regulations, and when taking coyote, within specified deer hunting zones, but excluding specific counties and areas.
This bill would instead require, as soon as is practicable, but by no later than July 1, 2019, the use of nonlead ammunition for the taking of all wildlife, including game mammals, game birds, nongame birds, and nongame mammals, with any firearm. The bill would require the commission to certify, by regulation, nonlead ammunition for these purposes. The bill would require that these requirements be fully implemented statewide by no later than July 1, 2019.
October 12th, 2013
Harris swivel-model bipods allow you to adjust the cant of your rifle. This is useful if you are shooting on side-sloping ground. But what if you want to traverse from side to side, say to switch from one critter to another during a prairie dog safari? Well normally you would have to pick up the entire rifle and reposition it to the left or to the right. Now you have an option. The Upriser Arms Bipod Swivel Mount allows you to traverse your rifle left to right, without moving the bipod legs.
Video Shows How Traversing Bipod Mount Works, with Locking Plunger Knob:
This rugged, machined-aluminum bipod mount lets you swing your aim point from side to side without having to reposition the bipod. The rubber-padded Upriser Arms Bipod Mount accepts any bipod that attaches to a forward sling swivel stud. There is also a version that fits on tactical rails.
It is easy to engage or disengage traversing capability via the plunger knob on the front of the unit. When you pull down on the plunger (and twist to lock in “down” position), the rifle can swing smoothly on an internal, precision-bearing pivot. To go back to non-traverse mode, simply center the fore-arm and then twist and release the knob so the plunger pops up, securing the bipod in the “dead-center” position. Note: This unit adds approximately 1¼” to bipod height.


This $69.99 bipod mount comes with a 100% satisfaction guarantee when purchased through Brownells or Sinclair Int’l. User feedback has been positive. One purchaser wrote: “I take this [traversing bipod mount] on all my hunts and it has impressed me immensely. The part is built strong and has improved my shooting. It is really smooth, easy to use, and helps me stay on scope when my game is on the move instead of having a shaky swivel or having to move the whole bipod. I have recommended this product to all of my friends[.] — Adam, Missoula, MT
October 12th, 2013
When we first ran this story 18 months ago, it proved immensely popular with our readers. In case you missed it the first time around, check out what can be done with a factory Savage 110 BA at extreme long range — 1760 yards. Shooter Mark Dalzell did a great job with the video, which features multiple camera views so you can see the shooter and the target at the same time. Enjoy!

This video by Mark Dalzell demonstrates the long-range capabilities of the Savage 110 BA chambered in .338 Lapua Magnum. Mark took his “BadAss” rig out to the southwest Nevada desert just north of Jean Dry Lakes. He placed a 2’x3′ target way, way out there — a full mile (1760 yards) away. At that range, flight time to target was 3.75 seconds! Sighting with a Nightforce 5-22x50mm NXS scope, Mark needed a few shots to get on target, but eventually made multiple hits, using 67 MOA of elevation and 2.25 MOA left windage. You can view the hits starting at 1:56 time-mark on the video. (Mark had a second camera set up closer to the target — this displays frame in frame in the video, and if you watch carefully you can see the strikes.) The ammo was HSM 250gr HPBT match with a 3.600″ COAL. The shooting was done at 8:13 in the morning, with clear conditions, very light winds. Temp was 57°, humidity 24.5, Density Altitude 3666. Video soundtrack is La Grange by ZZ Top.
PLAY BUTTON
|
LISTEN TO MARK TALK about One Mile Shooting:
CLICK Play Button to hear Mark Dalzell TALK about his .338 LM Savage 110 BA and how he scored hits at 1760 yards. |
Good Shooting Mark. That’s darn good for a factory rifle. You also had the elevation dialed in real close before the firing started! That shows a good knowledge of your ammo’s long-range ballistics. We also noticed how effective that muzzle brake was. Recoil looked about the same as an un-braked .308 Win.
October 11th, 2013
Need powder but can’t find your favorite Alliant, Hodgdon, or IMR propellant? Then consider using Norma powders. These are available now from Midsouth Shooters Supply. Norma 203B is very, very close to Alliant Reloder 15, and is made by the same manufacturer (Bofors). That makes it a great choice for the 6mmBR and 6mm Dasher. Norma 204 has a burn rate similar to H4350 (though you need to modify the charge weight). Norma MRP has a burn rate similar to Alliant Reloder 22 (a little bit slower than H4831sc on Hodgdon’s Chart). For those of you shooting the 30BR or small cartridges with light bullets, consider Norma 200. It has a burn rate very similar to IMR 4198 and H4198.
Midsouth Shooters Supply currently has large quantities of Norma Powder in stock, in both 1-pound and 8-pound sizes. You’ll find Norma 200, 202, 203B, 204, MRP (8-lb only), and URP (1-lb) only. As we said, if your powder supplies are dwindling, you may want to pick up some of these quality Norma propellants. Midsouth’s prices are very reasonable. Here are Midsouth’s Norma powder inventories as of 2:00 pm ET on October 11, 2013.
 |
NORMA 200 – 1 POUND
Item: 079-0660
Status: In Stock
Price: $25.84 |
NORMA 200 – 8 POUND
Item: 079-0662
Status: In Stock
Price: $192.34 |
 |
NORMA 202 – 1 POUND
Item: 079-0668
Status: In Stock
Price: $25.84 |
NORMA 202 – 8 POUND
Item: 079-0670
Status: In Stock
Price: $192.34 |
 |
NORMA 203B – 1 POUND
Item: 079-0672
Status: In Stock
Price: $25.84 |
NORMA 203B – 8 POUND
Item: 079-0674
Status: In Stock
Price: $192.34 |
 |
NORMA 204 – 1 POUND
Item: 079-0676
Status: In Stock
Price: $25.84 |
NORMA 204 – 8 POUND
Item: 079-0678
Status: In Stock
Price: $192.34 |
 |
NORMA MRP – 1 POUND
Item: 079-0680
Status: Out of Stock
Price: $25.84 |
NORMA MRP – 8 POUND
Item: 079-0682
Status: In Stock
Price: $192.34 |
 |
NORMA URP – 1 POUND
Item: 079-0688
Status: In Stock
Price: $25.84 |
NORMA URP – 8 POUND
Item: 079-0690
Status: Out of Stock
Price: $192.34 |
WARNING: If you do try Norma powders in place of other propellants, do NOT substitute loads without consulting established load manuals. Even though powders many have similar listed burn rates, you should never assume that load recipes will be the same at all. When trying a new powder, check manufacturers’ load data tables, and always start low and work up slowly.
|