Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









December 13th, 2012

How Case Filling Method Can Alter Powder Column Height

Most of us assume that if we weigh our powder carefully (down to the tenth of a grain or less) we can achieve a uniform powder fill from case to case in our handloads. Weighing does ensure that the weight of the propellant in each case is the same, but is the column of powder the same by volume each time? “Not necessarily” is the answer. An interesting experiment by our friend Boyd Allen demonstrates that the manner in which you place kernels in the case can make a significant difference in the height of the powder column within the brass case.

Using a Gempro 250 scale, Boyd measured exactly 30.6 grains of Vihtavuori N-133 powder. He then inserted this powder in the same cartridge case multiple times. (The case has a fired primer in place.) But here is the key — Boyd used various filling techniques. He did a slow fill, and a fast fill, and he also experimented with tapping and drop tubes. What Boyd discovered was that you can start with the exact same weight of powder (in fact the very same set of kernels), yet end up with vary different fill heights, depending on how you drop the kernels into the case. Look at the photos. Despite variations in lighting, the photos show the same 30.6 grains of powder, placed in the same cartridge, with four different methods.

Boyd Explains the Procedure Used for his Experiment.

EDITOR’s NOTE: So there is no misunderstanding, Boyd started with a weighed 30.6 grain charge. This identical charge was used for ALL four fills. After a fill the powder was dumped from the case into a pan which was then used for the next fill technique to be tried. So, the powder weight was constant. Indeed the exact same kernels (of constant weight and number) were used for each fill.

Boyd writes: “I used the same powder for all fills, 30.6 gr. on a GemPro 250 checked more than once. All fills employed the same RCBS green transparent plastic funnel. The fast drop with the funnel only overflowed when it was removed from the case neck, and 15 granules of powder fell on the white paper that the case was sitting on. The fast-funnel-only drop with tapping, was done with the funnel in place and the case and funnel in one hand, while tapping the case body with the index finger hard, many times (about 20 fast double taps). My idea here was to “max out” the potential of this tapping technique.

The slow drop with the funnel and 10″-long .22 cal. Harrell’s Precision drop tube, was done by holding the scale pan over the funnel and tapping the spout of the pan repeatedly on the inside of the funnel about 1/3 down from the top, with the scale pan tilted just enough so that the powder will just flow. Many taps were involved, again, to max out the technique.

Again, to be clear, after each case filling, the powder was poured from the case back into the scale pan carefully. You may notice the similarity between the fast drop with the drop tube, and the funnel only with tapping. Although I did not photograph it, fast tube drop and tapping (combined) improved on tapping alone, but only to about half as far down the neck as the slow with drop tube. Due to the endless possible permutations, I picked four and left it at that.

I believe that I can make the rough judgment that the scale pan funnel and drop tube technique, which involved a longer drop period, and probably less velocity at the top of the tube, left more room in the top of the case neck than the slow drop from the measure with the same drop tube. You have both pictures, so you can make the comparison.” — Boyd

Does Powder Column Height Variance Make a Difference?
Boyd’s experiment proves pretty conclusively that the method of dropping a given weight of powder can affect the height of the powder column in the case and the degree of powder compression (when a bullet is seated). He showed this to be true even when the exact same set of kernels (of constant weight) was used in repetitive loadings. This raises some interesting questions:

1. Will subsequent cartridge transport and handling cause the powder to settle so the variances in powder column height are diminished?

2. If significant inconsistencies in powder column height remain at time of firing, will the difference in fill level hurt accuracy, or result in a higher extreme spread in velocity?

3. Is there any advantage (beyond increased effective case capacity) for a tight (low level) fill vs. a loose (high level) fill?

We don’t know the answer to these follow up questions. This Editor guesses that, if we tested low-fill-height rounds vs. high-fill-height rounds (all with same true fill quantity by weight), we might see meaningful differences in average velocity. I would also guess that if you fired 10 rounds that exhibited quite a difference in powder column heights, you might see a higher ES/SD than if you shot 10 rounds loaded with a very consistent powder column height (either high or low). But further testing is needed to determine if these predictions are true.

Permalink Reloading, Tech Tip 12 Comments »
December 13th, 2012

Target Gift-Wrapping Paper from Creedmoor Sports

Here’s a cool new item for the avid shooters on your Xmas gift list. For this holiday season, Creedmoor Sports has created special package-wrapping paper with target graphics. The unique, heavy-weight gift wrap features Dennis DeMille’s High Power Rifle National Record Target score of 200-20x+100-8x at 200 yards. The 36″ x 24″ sheets are made from 60# stock with a gloss finish. Individual wrapping sheets cost $1.95 or you can buy five sheets for $7.95. This special wrapping paper with bullseye graphics is perfect for gifts to the shooters in your family, or for gifts a club may present to members at year’s end.

Creedmoor Sports Target Gift Wrap

Permalink New Product Post comment »
December 12th, 2012

Legendary Exhibition Shooter Bob Munden Passes at Age 70

Bob Munden passes awayFamed exhibition shooter Bob Munden passed away December 10th, from a heart attack. Bob was 70 years old. Munden’s friends at Hodgdon Powder stated: “Bob was a legend, a showman and a gentleman above all else.” Born February 8, 1942 in Kansas City, MO, Bob began his professional shooting career at age 11 in California. While still in high school, Bob placed second in the noted LeatherSlap competition, and that launched his fabled career as a fast-draw specialist and trick shooter.

Over his long career, Munden traveled around the globe giving shooting exhibitions. Munden was famous both as a speed-draw specialist and a trick shooter with all types of firearms. He was recognized as “The Fastest Man with a Gun Who Ever Lived” in the Guinness Book of World Records. As a star of Shooting USA’s “Impossible Shots” TV show, Munden provided amazing demonstrations of shooting skills for a national television audience — such as splitting a playing card tossed in the air. Many of Munden’s famous trick shots were “first-ever” challenges, tricks that no other marksman had ever done before.

Bob Munden passes away

Over the years Bob, often with his wife Becky (who is also a skilled shooter), appeared on many television shows, most famously American Shooter, Ripley’s Believe it or Not, Stan Lee’s Superhumans, Shooting USA, and Shooting USA’s Impossible Shots. Munden is featured in DVDs including Bob Munden: Outrageous Shooting and Bob Munden: The Collector’s Edition.

Bob Munden passes away

Registered as members #118 and #119 respectively, Bob and Becky entertained at the Single Action Shooting Society (SASS) End of Trail World Championships of Cowboy Action Shooting 30 times with what Becky proudly said was the most complex presentation ever offered at an exhibition shooting show. She added that Bob was Cowboy Action Shooting’s first gunsmith. After her beloved Bob passed away this week, Becky said: “We had an incredible, memorable life together.”

Permalink News 5 Comments »
December 12th, 2012

Compact Triple-Head Case Prep Machine from Hornady

Hornady Case Prep Assistant TrioHornady offers a handy power case prep tool driver (item 050160) with three power stations. Hornady basically took its previous single-drive Power Case Prep Assistant (item 050155) and added gearing to run three different heads. It took some clever engineering to accomplish this while maintaining the small footprint of the original one-head machine. MSRP for the new Case Prep Trio (item 050160) is $129.39. If you can live with a single power take-off, the older one-head Case Prep Assistant is still offered on “close-out” at some vendors. If you look around you may find one for as little as $79.99.

Hornady Case Prep Assistant Trio

Hornady calls its updated machine, with 3-tool capacity, the Lock-N-Load® Case Prep Trio. With three active stations, you can chamfer, deburr and clean primer pockets without having to change tools. The Case Prep Trio ships with inside chamfer, outside chamfer, and deburr tools. You can also use the machine with other optional 8/32 threaded accessories such as primer pocket reamers and case neck brushes. Conveniently, the Case Prep Trio has on-board storage for your tool-heads.

Hornady Case Prep Assistant Trio

Story tip by EdLongrange. We welcome reader submissions.
Permalink New Product, Reloading Post comment »
December 11th, 2012

Sinclair Int’l Gift Cards Can Be Sent at Last Minute

Only 13 more shopping days before Xmas, boys and girls. If you’re getting desperate, as time runs out for buying, packing, and shipping, consider giving an Electronic Gift Card from Sinclair Int’l or Brownells. eGift Cards can be sent at the last minute, and they are as good as cash for shopping with Sinclair Int’l or Brownells. If you prefer the hands-on approach, you can purchase a conventional Sinclair Int’l Gift Card and have it mailed to you or directly to the lucky recipient. CLICK HERE for more details.

Sinclair Int'l Gift Card

Permalink Hot Deals Post comment »
December 11th, 2012

Pro Photographer Yamil Sued Shows How to Capture the Action

Yamil Sued DVD

Yamil SuedYamil Sued provides expert photography tips in Capturing the Action, an instructional DVD from Panteao Productions. In this new DVD, Yamil reviews camera options, camera settings, which lens to use, support gear, range etiquette, positioning and composition, shooting in low light, shooting staged shots, post-production, and much more. Yamil, who also competes in action shooting matches, explains how to get great action photos and memorable images of your fellow shooters. Yamil knows his stuff — he regularly works for Smith & Wesson, Dillon Precision and other top-tier gun industry companies.

Though Yamil is probably best known for his action photography, Yamil is also a gifted studio photographer — you’ve seen his work on numerous magazine and catalog covers.

Watch Preview Trailer for Yamil Sued Photography DVD

Yamil Sued

Yamil Sued

Yamil SuedYamil Sued has been a working professional photographer for 27 years. He is a graduate of Brooks Institute of Photography in Santa Barbara, California, with a Major in Illustration Photography and Color Technology.

If you’re looking to achieve pro-quality results when photographing action shooting matches, this video is worth getting. Right now, as a holiday promo good through December 26th, you can pre-order the DVD for $37.49 — that’s 25% off the regular $49.99 price. Order direct from PanteaoProductions.com.

Permalink - Videos Post comment »
December 11th, 2012

Pappas Airgun/Rimfire Front Rest — Artistry in Aluminum

Our friend and product tester Joe Friedrich is the proud owner of a spectacular front rest from James Pappas. This rest is used for both air rifle and rimfire benchrest matches. The fancy Pappas front rest is a shortened, front-support-only version of the Pappas one-piece rest, which is popular with rimfire benchresters. Pappas engineered this rest to comply with air rifle benchrest rules which do not allow use of integrated (one-piece) front and rear rests. The end result was a 30.8-lb masterpiece of machining.

Pappas Air gun front rest

Pappas Air gun front rest

The workmanship on this Pappas front rest is astounding. Accurately described as a “work of art” by Joe Friedrich, this rest, crafted of aircraft-grade aluminum, sets new standards for “Benchrest BLING”. It looks like it should be on display in an art museum. Nearly all components of this rest, including the adjustment controls, have been polished to a mirror finish.

Pappas Air gun front rest

Convenient Rear Windage and Elevation Controls
The Pappas front rest features separate fine-tuning controls for windage and elevation, plus a central gross-elevation control. Normally, once the rest is centered-up on the target, you can make all needed elevation and windage adjustments with the rear (fine-adjustment) controls. In the video below, Joe explains how the controls work as he practices with his modified Theoben Rapid MFR air rifle. Joe hopes to use this new Pappas rest in the upcoming Air Rifle Benchrest Worlds to be held in South Carolina this summer. (Note: In the last minute of the video, the back-lighting was so intensely bright that we lost detail in the foreground. We apologize for that flaw, but you can still hear the audio.)

YouTube Preview Image

Price for this Masterpiece? Don’t Ask…
If you are interested in getting a similar rest, visit PappasRimfireProducts.com, or call James Pappas directly at (817) 735-9883. Be forewarned — James said “If you need to ask about the price, you probably can’t afford it.” This is truly the “Rolls-Royce” of front rests, and it will be priced accordingly.

Permalink - Videos, Competition, New Product Post comment »
December 11th, 2012

Dewey Offers Aluminum Jags and Aluminum-Tipped Rods

For decades shooters have used brass jags attached to brass-tipped cleaning rods. These work effectively. But there is one problem. Many bore solvents will react with the brass metal to give “false positives”. You can get bluish-green patches even when there is no copper fouling in your bore.

To solve this problem DeweyRods.com offers a full line of aluminum jags, aluminum brush adapters, and nylon-coated cleaning rods with aluminum tips. Dewey explains: “Ammonia-based solvents attack copper & brass but also leave your patches a blue-green color so you are never sure if your bore is truly clean of copper. Our aircraft-grade aluminum has the same hardness of brass, it will not embed impurities or harm your bore, and ammonia will not attack it.” As shown below, along with caliber-specific aluminum jags (center), Dewey now offers aluminum thread adaptors (left) and aluminum-shaft brushes (right).

Dewey Aluminum Jags

New Dewey ‘Copper Eliminator’ Cleaning Rods
These new rods have the same nylon coating and handle assembly as Dewey’s standard coated rods, but they feature a chemical-resistant, 8/32 female-threaded, aluminum ferrule. No brush adapters are required. Each rod is supplied with a male-threaded aluminum jag. Dewey charges $39.95 for these rods, but you may find them slightly cheaper at other vendors.

Dewey Copper Eliminator Cleaning Rod

Copper Eliminator Rods are currently offered in two diameters (.22-.26 Cal, or .27+ Cal), and three lengths: 36″, 40″, 44″. Listed rod lengths do NOT include handle assembly. One last note: Dewey cautions users to avoid TM Solution, because this solvent may harm Dewey’s nylon rod-coatings.

Story sourced by Edlongrange.
Permalink Gear Review, New Product 1 Comment »
December 10th, 2012

Save $5.00 on Bryan Litz Books from Applied Ballistics

Bryan Litz, Ballistican for Berger Bullets, is actually a trained rocket scientist, not to mention a skilled long-range shooter. Bryan’s books on Ballistics and Precision Long Range Shooting have been recognized as the leading resources of their kind in print. Now you can save money on Bryan’s highly-regarded books through a special holiday promotion.

Bryan Litz Applied Ballistics Books

Bryan tells us: “For a limited time, we are taking an additional $5 off the retail price of our titles Applied Ballistics for Long Range Shooting 2nd Ed. (regularly $49.95, $44.95 on sale) and Accuracy and Precision for Long Range Shooting (regularly $34.95, $29.95 on sale). And, by purchasing direct from Applied Ballistics you can get your copy autographed by the author”.

CLICK HERE to ORDER with special holiday pricing on Bryan Litz books.

Here are what others are saying about these books.

“Got my copy of Accuracy and Precision for Long Range Shooting and can’t put it down! Exceptionally well done! Both this and Applied Ballistics for Long-Range Shooting” are definite requirements for all long range shooters!” — Eric K.

“Thanks, Brian. You have opened up a whole new ‘world’ in shooting, for those of us who love shooting and hunting, but don’t have the academic background to really appreciate the intricacies of science.” — Terje N.

Permalink Hot Deals 1 Comment »
December 10th, 2012

NBRSA Announcements to Members for 2013

NBRSA logoAfter concluding its 2012 Board Meeting, the NBRSA has issued some announcements for its membership. The Fee structure has changed, and Match Directors are requested to submit info on upcoming 2013 Matches. In addition, the NBRSA noted that Long Range Rule Books are now on sale for $5.00. Call (307) 655-7415 to order these Rule Books.

NBRSA Fee Schedule for 2013
Dues and match fees will change beginning January 1, 2013. The new fee structure is designed “to be equitable to everyone”, with adjustments reflecting shipping costs. Normal match fees change to $3 per shooter per day. Annual Fees will be:

  • USA Domestic Annual Members & Clubs: $60
  • CANADIAN Annual Members: $60 + $25 shipping — Total US $85
  • INTERNATIONAL Annual Members: $60 + $60 shipping — Total US $120

2013 Match Schedules and Forms
The NBRSA requests that match directors send in their 2013 match schedules to Regional Directors as soon as possible. This will allow the NBRSA to post schedules online and in Precision Rifleman magazine. Match Directors who require Forms should click the links below.

Memorandums of Agreement (MOAs) | Match Vouchers Forms

News Tip from EdLongrange. We welcome reader submissions.
Permalink News Post comment »