Available for under $180.00 including front bag, the Caldwell Fire Control front rest is a remarkable value. It makes the co-axial, joystick design more affordable than ever. We used the Fire Control front rest when testing our Ultimate Varminter 20 Practical AR. Once we removed some sand from the tri-lobe front bag, the rest worked quite well.
Get a Fire Control Rest for Just $179.40
Amazon.com currently sells the Fire Control rest (item 956104) for $179.40. That’s a really spectacular deal for guys on a tight budget, looking to try out a joystick-style front rest. With the conversion described in this article, you can put together a system that works pretty darn well, and is more than adequate for many applications, including prairie-dog hunting (from a bench).
While most Fire Control owners are happy with the product, many have wanted to replace the tri-lobe front bag with a more conventional front bag from Protektor or Edgewood. This isn’t as easy as it looks because the width of the Fire Control top is too narrow for most standard 3″-wide front bags. On a “special order” basis, Protektor has crafted some narrower leather front bags that fit pretty well, but some shooters have decided to “upgrade” the entire front assembly.
Forum member Doug M. (aka DrJeckyl), has come up with an elegant solution that allows a Sinclair Int’l Benchrest Rest Top to be fitted to the Fire Control Rest. Doug notes: “The Caldwell Fire Control is a nice rest for the money, but it comes up short in the rest top department. The Sinclair RT-3 [or its replacement, the Gen II B/R top] fits perfect with minor modifications.” Shown below are the main components:
To adapt the Sinclair RT-3 or Gen II B/R top, Doug merely had to drill a couple holes in the RT-3 baseplate, and adapt a spacer to get the height correct: “The Caldwell factory top has a raised mounting portion so a 1/8″ piece of stock will be needed as a spacer to the flat-bottom RT-3. The spacer needs to be cut to the same length as the movable portion on the rest. And you should plan the mounting accordingly so the left thumbscrew clears the vertical height column at full left position (there is a cutaway in the rest under the thumbscrew that allows for easy access to the screw).” We have labeled the photo with dimensions, but Doug cautions you should measure your own original plate to insure the drill locations are correct for your unit.
Below you’ll see the completed installation, with the RT-3 installed on the Fire Control rest. Doug says it works very well. For more information on this Fire Control rest top conversion, with Doug’s measurments for the hole-spacing and his specs on the fasteners, go to the original thread in our Shooter’s Forum. NOTE: Sinclair no longer sells the RT-3 top, but Sinclair’s $69.95 Gen II B/R top can be converted just as easily. LINK to Fire Control Rest Top Conversion Forum Thread.
The Smith & Wesson Model 41 is an American classic — one of the great, iconic .22LR target pistols. Accurate, well-balanced and built-to-last, model 41s have been in production for over 50 years. The Model 41 remains one of the most accurate pistols ever produced by Smith & Wesson. Now the Model 41 has been updated for the 21st Century, with the introduction of a new Performance Center “optics-ready” version. The new Model 41 PC has an integral Picatinny Rail mount for optics, plus adjustable target sights, with a distinctive skeletonized and removable front blade sight.
This full-size, 10-shot .22LR pistol features a carbon steel frame and slide along with a 5.5-inch barrel. Measuring 10.5 inches in overall length, the Model 41 PC has an unloaded weight of 41 ounces.
Across the top of the slide, the Performance Center Model 41 sports an integral Picatinny-style equipment rail for easy installation of optics. Other standard features include an external thumb safety on the left side of the frame, custom wood target grips, and a blued finish. The Performance Center Model 41 is covered by Smith & Wesson’s lifetime service policy. To learn more about the optics-ready Model 41 PC and other new Performance Center guns, visit www.smith-wesson.com
Here’s a good deal from Cabelas.com, but you have act quickly — the $20 OFF deal expires Nov. 13th at 11:59 pm. If you supply an email address, you’ll get a Promo Code entitling you to $20.00 off any internet or catalog order of $150.00 or more. Use this to stock up on gear and supplies at the end of the year. While you’re shopping, check out Cabela’s Bargain Cave for some great deals. This $20.00 Off Promo is good through November 13, 2012, at 11:59 pm EST.
Offer is valid for purchases made at Cabelas.com or catalog call center. Not valid on Gift Certificates, Gift Cards, or licenses. Offer may be used only once. Offer cannot be used on prior purchases. Offer cannot be used in combination with any other promotion, rebate or previous offers. Offer not valid at our Canada store locations, call center or cabelas.ca website.
Offer tip from EdLongrange. We welcome reader submissions.
On the 11th hour, of the 11th day, of the 11th month of 1918, bugle calls signaled the ‘cease fire’ ending the First World War. (The official Armistice was signed earlier that morning.) To those who endured it, WWI was the “Great War”, “the War to End All Wars.” Tragically, an even greater conflict consumed the world just two decades later.
Today, 94 years after the end of WWI, Americans mark the anniversary of the WWI Armistice as “Veterans Day”. In Canada it is known as Remembrance Day. On this solemn occasion we honor all those who have served in the military in times of war and peace.
While more WWII veterans pass away each year, there are still over 23 million veterans in the United States. Take time today to honor those soldiers, sailors, and airmen who have served their nation with pride. Today we remember that… “All gave some, and some gave all.”
Former Secretary of Veterans Affairs Dr. James Peake asked Americans to recognize the nation’s 23.4 million living veterans and the generations before them who fought to protect freedom and democracy: “While our foremost thoughts are with those in distant war zones today, Veterans Day is an opportunity for Americans to pay their respects to all who answered the nation’s call to military service.” Major Veterans Day observances are scheduled at more than 50 sites in 29 states.
On Veterans Day we especially need to remember the seriously wounded combat veterans. These men and women summon great courage every day to overcome the lasting injuries they suffered in battle. CLICK HERE for inspirational profiles of wounded vets who, through courage and determination, have learned to adapt to their disabilities. Some of these soldiers have lost limbs, yet volunteered to return to combat duty. That is dedication beyond measure.
National Veterans Day Ceremony
The Veterans Day National Ceremony is held each year on November 11th at Arlington National Cemetery. The ceremony commences precisely at 11:00 a.m. with a wreath laying at the Tomb of the Unknowns and continues inside the Memorial Amphitheater with a parade of colors by veterans’ organizations and remarks from dignitaries. The ceremony is intended to honor and thank all who served in the United States Armed Forces. Major regional ceremonies are also held throughout the country. CLICK HERE for list of regional Veterans’ Day events.
Berger Bullets recently announced that it is discontinuing a variety of bullet types in eight different calibers from .17 to .30. These bullet designs are being phased out, and many will be replaced with updated products in similar weight ranges. Though some bullet types are being discontinued, these projectiles might still perform great in your rifle(s). You should check the list of discontinued Berger Bullets below. If you are already using some of these, and find that they shoot well in your rifle(s), you may want to consider picking up a supply before they’re all gone. In our reloading-for-accuracy game, sometimes a “sure thing” is the best option.
Berger explains: “We are hearing about increased orders on both firearms and components. In preparation for the coming months, we are discontinuing several of our bullet designs which are not big sellers. This will give us more production capability for our more popular bullets and new releases, ensuring that you receive your bullets as quickly as possible. Also, this help us move forward on several new bullet designs for target, hunting, varmint and tactical applications.”
November 16th Deadline to Purchase Discontinued Designs
Berger has declared that “all existing orders for these bullets will be filled. Any additional orders must be placed by Nov 16, 2012. These bullets will no longer be available after November 16, 2012.”
Berger Bullets Discontinued After November 16, 2012
Part Number | Description
.17 Caliber
17304 17 CAL 20 GRAIN MATCH FB VARMINT
17310 17 CAL 30 GRAIN MATCH FB VARMINT
17407 17 CAL 25 GRAIN MATCH FB TARGET
.20 Caliber (.204)
20302 20 CAL 30 GRAIN MATCH FB VARMINT
20305 20 CAL 50 GRAIN MATCH BT VARMINT
.22 Caliber (.224)
22301 22 CAL 30 GRAIN MATCH FB VARMINT
22307 22 CAL 50 GRAIN MATCH FB VARMINT
22426 22 CAL 90 GRAIN MATCH BT TARGET
6mm (.243)
24301 6MM 60 GRAIN MATCH FB VARMINT
24405 6MM 65 GRAIN MATCH FB TARGET
24432 6MM 100 GRAIN MATCH BT TARGET
Part Number | Description
.25 Caliber (.257)
25407 25 CAL 87 GRAIN MATCH FB TARGET
25413 25 CAL 115 GRAIN MATCH VLD TARGET
6.5mm (.264)
26408 6.5MM 100 GRAIN MATCH BT TARGET
7mm (.284 Cal.)
28404 7MM 180 GR MATCH BT TARGET
28408 7MM 175 GRAIN MATCH XLD TARGET
.30 Caliber
30401 30 CAL 110 GRAIN MATCH FB TARGET
30403 30 CAL 125 GRAIN MATCH FB TARGET
30405 30 CAL 135 GRAIN MATCH FB TARGET
30411 30 CAL 168 GRAIN MATCH BT TARGET
30414 30 CAL 190 GRAIN MATCH VLD TARGET
Story tip by EdLongrange. We welcome reader submissions.
Today marks the 237th anniversary of the founding of the U.S. Marine Corps. At Tun Tavern in Philadelphia on November 10, 1775, the Marine Corps was formed. “For 235 years, at sea and ashore, Marines have succeeded in every clime and place where hardship and adversity have often been the common thread.” said Gen. James F. Amos, commandant of the Marine Corps in this year’s birthday message. “Today, in the rugged mountains and valleys of Afghanistan – and recently in the earthquake damaged Haiti, in flood-ravaged Pakistan, or off the coast of Africa, we continue to protect our nation, just as we did 60 years ago in Korea.”
Team GLOCK member K.C. Eusebio won the High Overall Award at the World Speed Shooting Championship (aka Steel Challenge) held November 1-4 in Frostproof, Florida. This was the first time in the competition’s history that a Glock (albeit a modified version) boasted the lowest elapsed time over the 8-stage course of fire.
Using his hot-rodded Glock 17, 24-year-old Eusebio shot approximately 200 rounds in less than 79 seconds. That’s total time for multiple stages of steel targets set at 10 to 35 yards. The GLOCK, modified by Zev Technologies of California, had a C-More Red-dot sight, 3-port compensator and a textured silicon carbide grip coating. “Regardless of the modifications, it’s still a GLOCK,” commented Eusebio. “Flawless. This was my fourth championship win, the first time that’s been done by anyone.”
When it comes to raw speed on the Challenge course, Eusebio is the man. K.C. currently holds several world records in the Steel Challenge Shooting Association (SCSA), including the fastest time on the “Smoke And Hope” stage: 1.69 seconds to draw and hit five individual steel targets. That’s not a misprint — 1.69 seconds for five shots hitting five different plates. Here’s a video of K.C. Shooting “Smoke and Hope” in California a few years back when he was a member of the USAMU shooting team.
Eusebio told us: “We definitely set the bar high at this match. I shot record-breaking scores of 2.55 seconds on the “Pendulum” stage and 2.27 seconds on “5 To Go”, and came out on top in 4 of the 8 stages. I also averaged 1.80 seconds on the “Smoke and Hope” stage. Heads were turning, some said it couldn’t be done, but I had confidence in my ability and my Glock”.
Photo courtesy Shin Tanaka
The Steel Challenge was created in the early 1980s in Southern California, as a new and exciting addition to combat or practical shooting matches. The originators, Mike Dalton and Mike Fitchman, wanted an exciting alternative to paper targets and came up with the all-steel format. The match awards the fastest time, but accuracy is also critical. The Steel Challenge is now a hugely popular event with West Coast Championship in Piru, CA and East Coast Championship in Florida. There are also regional Steel Challenge Matches held around the country.
Want to invest in a gun-making milestone, with authentic “PPC Provenance”? Here is a rare opportunity to acquire a set of guns that forged new frontiers for rifle accuracy. Dave Kiff, founder of Pacific Tool & Gauge, is selling a consecutive built and numbered set of four (4) benchrest rifles which belonged to Ferris Pindell, one of the fathers of the PPC cartridge. These four game-changing guns were custom-crafted by Pindell with help from his friend and fellow PPC inventor Lou ‘Doc’ Palmisano.
Dave Kiff tells us: “These are the four rifles that June Pindell had sold me a while back. I have #1, #2, #3 and #4 of Ferris Pindell’s original custom-made Benchrest rifles. These are consecutive builds. I am selling all four at cost! Several collectors (and one museum) have offered a generous amount of money for only one or two of them, but I would hate to split them up. I would much rather sell all four of them complete for $6,900.00 and keep them all together. There are two PPCs and two BRs from what his wife told me. June told me these are the rifles that Ferris and ‘Doc’ Palmisano built when they created the PPC cartridge. This would be a great addition to any collection or a great start for anyone interested in shooting competition, as the rifles look very usable.”
For more information, call Yvette of PT&G at (541) 826-5808, or send email to yvette [at] pacifictoolandgauge.com .
Sale tip by Boyd Allen. We welcome reader submissions.
SSG Daniel Horner and SPC Tyler Payne of the USAMU outlasted 35 other teams to win the tough 72-hour International Sniper Competition at Fort Benning, GA. The 2012 field included entries from Denmark, Germany, Ireland, United Arab Emirates, plus U.S. Army Special Forces, the Air Force, Marine Corps, and Army National Guard. There were also LEO duos from Las Vegas, Chicago and Florida.
The competition is hosted by the U.S. Army Sniper School. Top shooters from across the globe travel to Fort Benning, GA to compete in the annual competition, a grueling test of marksmanship and sniper skills. The two-man teams competed in 14 events including a sniper stalk, urban shooting, and orienteering exercises, firing under stressful conditions. The 72-hour event runs virtually non-stop, with only two four-hour rest breaks in the three days of competition.
“It feels awesome to win,” SSG Horner said. “I’ve wanted to compete in this event my whole life. We didn’t have a slot to compete in the last few years so when we got in this year we trained hard the past few weeks to get prepared.” Horner’s partner, SPC Payne, added: “There were some real challenges out there. Many of the events had tight time constraints. Finding the targets was tough, especially at night.”
“Time management was a big factor in the outcome,” Horner said. “We are really good at getting a lot accomplished really quickly. There was no way you could physically get everything done in the time allotted so it was who completed the most in the time they had. In an event like this if you only know the fundamentals then you will get run over. The fundamentals are the foundation of any good marksman, but here you had to know how to read wind, calculate mover speed, shoot alternate positions, and be able to physically complete the events, such as the 4.5 mile run with all of your gear.”
Despite having seven shooting teams within the ranks of the USAMU, the unit doesn’t have a sniper team nor teach sniper skills at any of the marksmanship training courses. Horner is a 5-time and current USPSA Multi-Gun national champion and Payne was a finalist at last year’s 3-Gun Nation championship. As members of the action shooting team, the Soldiers must have the ability to shoot rapidly and accurately with a handgun, rifle and/or shotgun, skills they were able to adapt and use for the sniper competition.
SSG Horner and SPC Payne hope to defend their title next year. Payne explained: “We have wanted to shoot this for a long time so to win it in our first year feels amazing. I really hope we get to come back next year and defend our title.”
Our friend Sebastian Lambang, creator of the SEB Coaxial rests and the new SEB Joystick Bipod, recently visited Great Britain to participate in the European F-Class Championships. While in the UK, Seb visited the famous (infamous?) Diggle Range, as well as London Towne. Seb was hosted by Brit shooters Brian Fox and our buddy Vince Bottomley (who writes for the TargetShooter Magazine).
Shooting in the UK Report by Sebastian Lambang
After flying from Surabaya to Manchester airport, Brian Fox picked up my wife Lily and me on Oct. 26 morning. We then went straight to Diggle Hotel. Saturday I shot the 800-yard match at Diggle Range and Sunday I shot the 300m ‘Tactical’ Match.
Monday to Wednesday morning Lily and I did sight-seeing in London. Then we went to Bisley by train. I got a little practice time on Thursday then shot the individual match on Friday and Saturday. The team match was on Sunday but I didn’t shoot it since a friend took us to his house.
Bisley Was Cold and Conditions Were Hard to Read
I think I didn’t do very well in the Europeans. Probably because this was my first-ever F-class match, and the temps were too low for me. I was told also that Bisley is hard to shoot, the wind flags pointing ‘everywhere’, and I wasn’t sure what I should I watch to judge the conditions. I can’t trust the wind-flags, I couldn’t see mirage most of the time to help to determine the hold off. However I really liked the Championship event and enjoyed the shooting. Congrats to Lee Tomlinson (F-Open Winner, 459.30), Tim Stewart (F-TR Winner, 439.23) and Great Britain’s victorious F-Open and F-TR teams.
Vince Bottomley supplied a rifle for me to use at the Championships. Vince is a great guy indeed, he helped me with the rifle, the loads etc., and most of all he spent three full days with me while I was shooting the match. I can’t thank him enough.
Testing the New SEB Joystick Bipod
AccurateShooter: How did the new Joystick Bipod Work?
Seb: Unfortunately I didn’t have much time to try the bipod myself. But Thursday afternoon several Spanish shooters tried the bipod on their gun and they said that the bipod works fine and their shots went into the spot they want. I tried a few rounds with their gun but the impacts were not as expected … probably because I shot their F-TR .308 gun free recoil. [Editor: Even with ski-type bipod feet, you will usually benefit by having a pretty firm grip on the gun — not a death hold — but contact with the gun at multiple points.]
AccurateShooter: When will the bipod go on sale? Is the design finalized?
Seb: I still need to perfect the legs of the bipod, I think. I will probably make two models, one with compactness in mind and one other with the lightest legs possible. The MAX rest is in production currently, and then I’ll make another 200 NEO rests for the people on the waiting list. After that we could probably start bipod production. I do hope that the bipod can be ready for sale sometime in mid-2013. The first batch would be 100 units. If my prediction is correct, all 100 units will be sold or spoken for.
AccurateShooter: How much will the production version of the Joystick Bipod cost?
Seb: Still not sure, but it should be around $350-$400 in the USA. The most expensive part is the coaxial unit. According to Brian Fox, the bipod attracted a lot of attention/interest during the match and if I had a dozen units with me, we might have sold them all at the match.
Great Visit to the UK
I really enjoyed my visit to the UK, especially visiting with Brian Fox (he is a great guy and genuine indeed!) and meeting fellow shooters from other European countries. I learned a bit from the F-class shoot and I think the bug has bitten me. It’s also nice to see a sea of SEB rests at the Bisley range in the F-Open Class.
I send my thanks to all the people I met during my visit. It is great to make new friends, and I’m happy to be a part of this great group of shooters.
On the 11th hour, of the 11th day, of the 11th month of 1918, bugle calls signaled the ‘cease fire’ ending the First World War. (The official Armistice was signed earlier that morning.) To those who endured it, WWI was the “Great War”, “the War to End All Wars.” Tragically, an even greater conflict consumed the world just two decades later.
Team GLOCK member K.C. Eusebio won the High Overall Award at the World Speed Shooting Championship (aka 
Want to invest in a gun-making milestone, with authentic “PPC Provenance”? Here is a rare opportunity to acquire a set of guns that forged new frontiers for rifle accuracy. Dave Kiff, founder of 
Despite having seven shooting teams within the ranks of the USAMU, the unit doesn’t have a sniper team nor teach sniper skills at any of the marksmanship training courses. Horner is a 5-time and current USPSA Multi-Gun national champion and Payne was a finalist at last year’s 3-Gun Nation championship. As members of the action shooting team, the Soldiers must have the ability to shoot rapidly and accurately with a handgun, rifle and/or shotgun, skills they were able to adapt and use for the sniper competition.
Our friend Sebastian Lambang, creator of the 
Seb: I still need to perfect the legs of the bipod, I think. I will probably make two models, one with compactness in mind and one other with the lightest legs possible. The MAX rest is in production currently, and then I’ll make another 200 NEO rests for the people on the waiting list. After that we could probably start bipod production. I do hope that the bipod can be ready for sale sometime in mid-2013. The first batch would be 100 units. If my prediction is correct, all 100 units will be sold or spoken for.
Great Visit to the UK
