If you hand-load pistol ammunition, you should definitely have a case gauge (aka “gage”) for each cartridge type you reload. Caliber-specific, precision-machined cylindrical gauges perform many important functions. They will instantly reveal if your rounds are too long or have excessive headspace. They will also show if your case is bulged or otherwise too fat to chamber easily. You can use the gauge with sized brass as well as loaded rounds.
Case gauges are a “must-have” for anyone loading handgun ammunition, particularly if you crank out large quantities of pistol ammo with a progressive press. An oversize round can cause a misfeed, jam, or other problem. That can ruin your day if you are in the middle of a shooting match. If you are relying on your handgun for self-defense, the last thing you want is a malfunction of any kind. This Editor personally runs every pistol round through a gauge before it goes into the ammo box.
UltimateReloader.com Video Shows How to Use Pistol Case Gauges:
Our friend Gavin Gear of UltimateReloader.com has prepared an excellent video that explains the benefits of pistol case gauges and shows how to use them. Gavin uses the quality gages produced by L.E. Wilson. These are available for the most popular handgun cartridges, both autoloader cartridges, and rimmed revolver cartridges. Gavin demonstrates gage use with .40 SW and .44 magnum cases.
Gavin states: “Using a case gage is very simple, and I would recommend that you add one of these gages to your reloader’s tool chest for each of the pistol cartridge types you reload. It may just save you a lot of time and hassle. Peace of mind is hard to put a price on!”
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
1. Powder Valley — Sale on Popular Powders
⏺ High demand powders are IN STOCK now at very competitive prices
Powder Valley is a great vendor for reloading supplies. And right now Powder Valley has popular Hodgdon, Accurate, Alliant, and Vihtavuori powders in stock, plus other brands. Need Varget, H4350, H4831sc, Reloder 16, or Vihtavuori N133 or N550? Then head over to PowderValley.com to get savings up to 20%.
2. Palmetto SA — AR-15 Lower with Magpul Stock, $119.99
⏺ Great price on complete AR lower with trigger and adjustable stock
This is the lowest price we’ve seen for a name-brand AR-15 platform complete lower with a quality MagPul adjustable stock. If you are building an AR for varminting, 3-Gun, or home defense, check out this Palmetto sale. Get the Flat Dark Earth (FDE) Magpul MOE lower for just $119.99, a whopping $280 off the $399.99 list price. Or for the same $119.99 price get the Olive Drab Green (ODG) version or the Dark Grey version. All these lowers have quality Magpul stocks and grips and include full trigger groups. Use the money you save with these bargain lowers to buy a top-grade barrel.
3. Midsouth — RCBS Reloading Gear Sale, Save up to $110
⏺ Major sale on RCBS tools, presses, powder scales and more
Midsouth is running a huge SALE on RCBS products — Presses, Reloading Tools, Powder Dispensers, Tumblers, Dies, Priming Sets, Casting Accessories and more. Save up to $110 on Reloading Kits, up to $50 on powder scale/dispensers, and save $50 on case prep kits. Go to Midsouth’s RCBS Sale Page to see all 17 items on sale.
4. Midsouth — Starline Rifle and Pistol Brass Sale, Save 10-12%
⏺ Good selection of Starline cartridge brass on sale
Midsouth is currently running a major sale on Starline brand Rifle Brass and Pistol Brass. Prices are discounted 10-12% on popular cartridge types including 9mm, .44 Magnum, .45 ACP, .223 Rem, 6mm Creedmoor, .308 Win and more.
5. Natchez — SIG Sauer Scope and Rangefinder Combo, $399.99
⏺ Great “intelligent combo” — LRF data works with scope
Here’s a solid combo kit for hunters. For under $400 you can get the SIG Sauer BDX rangefinder and riflescope system — a 3.5-10x42mm scope and laser rangefinder. With the SIG BDX smartphone App you can pair the KILO BDX rangefinder and the BDX-enabled scope. Once you’ve created your basic ballistic profile, the system’s brain tells you the needed hold-over. After ranging your target, the KILO BDX rangefinder employs advanced Applied Ballistics software and then sends the elevation solution to the scope via Bluetooth.
6. EuroOptic — Swarovski 75th Anniversary Sale, Save up to $500
⏺ Save hundreds on top of the line optics
If you are looking for a superb riflescope, spotting scope, binculars, or rangefinder binoculars, check out the Swarovski 75th Anniversary Sale at EuroOptic.com. We’ve tested Swarovske RangeFinder Binoculars and they are superb, as is the Swarovski modular spotting scope system.
Here’s a great deal on good electronic muffs. Right now you can get black Walker’s Razor Slim Electronic Muffs (#ad) for just $33.28, a 58% discount. Other colors of Razor Slim muffs are offered starting at $37.00 for plain black (#ad). These Razor muffs have a good noise reduction rating (NRR) of 23 dB. (For best protection run plugs under the muffs.) The Razor series also feature Walker’s comfort fit headband for all day shooting. NOTE: These are Amazon’s #1 Best Seller in Hunting & Shooting Earmuffs.
8. Amazon — KUBEI USB Rechargeable Digital Scale, $24.99
⏺ Compact scale with USB-rechargeable battery at great price
Everyone can use an inexpensive, compact scale for loading at the range or sorting bullets or maybe even primers. One very affordable option KUBEI USB Rechargeable Digital Scale (#ad). Unlike most other inexpensive digital scales, this comes with a large dust cover with a “window” for your powder pan. Notably, this scale can be conveniently recharged with a standard USB cable — no batteries to replace ever! We have heard positive reports from Forum members about this $24.99 portable scale, which offers 9 types of weight units, calibration weight, and fold-down protective lid.
9. MidwayUSA — Frankford Arsenal Tumbler Kit, $59.99
⏺ Good, reliable tumbler complete with media separator
You want your cartridge brass to be clean before resizing and bullet seating. A tumbler can clean large quantities of brass quickly and efficiently. One of the best tumblers for the price is the Frankford Arsenal Quick-N-EZ Vibratory Case Tumbler. This reliable tumbler holds up to 600 9mm or 350 .223 Rem cases. The included separator fits most buckets, allowing efficient collection of media after tumbling. Bonus: If you order at least $99 of products from MidwayUSA, this Tumbler Kit ships free.
10. Amazon — Splatterburst Target 50 pack, $35.99
⏺ Good target with hi-viz bright yellow shot displays
Splatter targets make it easy to see your shot locations, even at significant ranges (300 yards and beyond). By contrast, bullet holes on regular paper targets can be hard to see past 200 yards. With these Splatterburst 12″x12″ Targets (#ad) you can instantly see your shots upon impact and spend less time checking your target. These targets feature five diamonds in a high-viz grid pattern for precise aiming. Chose a 10-pack for $12.99, a 25-pack for $22.99, or a 50-pack for $35.99.
As an Amazon affiliate, this site can earn revenues through sales commissions.
Adam Scepaniak, of The Guns and Gear Store, has written an interesting story about Prairie Dog Hunting in North Dakota. If a P-Dog safari is on your “bucket list”, you’ll want to read the full story in the Sierra Bullets Blog. Adam provides many tips that can help you plan a successful prairie dog adventure.
Prairie Dog Hunting in North Dakota with Sierra Bullets
It’s that time of year where lots of men and women point their vehicles westward and try to push the limits of their rifles on prairie dogs. [A few seasons back] I was a part of this group of people… while in northwestern North Dakota. CLICK HERE to Read Full Story.
Little Missouri National Grassland
Once my hunting party arrived at the Little Missouri National Grassland in North Dakota we immediately began scouting for prime prairie dog towns. There is a certain amount of strategy involved in choosing a prairie dog town … for several reasons. For one, you should try to always stay “above” the prairie dogs.
Small objects like rocks, cactuses, and prairie vegetation can easily obstruct your view if you’re shooting prone on a level plane. We encountered this in the first small prairie dog town we stopped and shot at. The prairie dog town was very visible while walking and standing, but once we laid down with our rifles on bipods the two-foot prairie grass became a severe obstruction. We shortly moved on because the small town became quick-studies to our shooting.
The second prairie dog town we hunted was at the base of a small ridge with a dried, cattle creek at the bottom. This area offered better shooting opportunities because we were above most of the prairie dog holes, and if we were not above them, a deep ravine separated us from the prairie dogs removing any obstructions from our rifle scopes which was our previous problem. This area had its own disadvantage though because of some other wildlife present. There were approximately fifty head of cattle in our close vicinity grazing, which was to no surprise because many ranchers utilize the National Grassland for grazing. We had to wait for the cattle to leave our area as to not have an incidental hit due to a rare ricochet. As the sun passed over the horizon we decided to return to this spot the next morning, but would change our shooting position to increase our advantage.
This Location Offered a Nice Overlook.
Zoomed Image Shows Individual Prairie Dog Mounds.
My previous varminting best was a 275-yard shot near Mobridge, South Dakota on a separate prairie dog hunting trip. With more experience and better reloading, Here in North Dakota I was able to make a solid hit on a prairie dog just over 400 yards which made me ecstatic! For a central Minnesota, shotgun-raised guy, I was pretty happy that my bullet selection and hand-loading ability produced a 125-yard improvement.
Once we cleaned and cased our rifles for the journey home we had shot a little over 200 rounds of my Sierra® reloads. This was a lot less than previous prairie dog trips I have been a part of, but our hit percentage was substantially higher as well. Traveling into a new area meant a lot more scouting and experimentation for us as a group. In future trips or hunts of your own, it can be very beneficial to schedule an extra day just for scouting[.]
Little Missouri National Grassland is a National Grassland located in western North Dakota. At 1,033,271 acres, it is the largest grassland in the country. Within its borders is Theodore Roosevelt National Park. The Little Missouri National Grasslands was once a part of the Custer National Forest, but is now a part of the Dakota Prairie Grasslands, a National Forest unit consisting entirely of National Grasslands. A predominant feature of the grassland is colorful and beautiful badlands, a rugged terrain extensively eroded by wind and water. It is a mixed grass prairie, meaning it has both long and short grass.
The boundaries of the grasslands on certain maps can be misleading. Within the boundaries of the national grassland are significant portions of state-owned and privately-owned land, much of it leased by cattle ranchers for grazing.
The grassland is administered by the Forest Service as part of the Dakota Prairie Grasslands from offices in Bismarck, ND. There are ranger district offices in Dickinson and Watford City.
We have always liked Tikka actions, and now there is a great re-barreling option for Tikka T3 owners. Criterion Barrels Inc. (CBI), makers of “pre-fit” barrels for Savage, Remington, and Rem-clone actions, also produces Tikka pre-fits. These pre-chambered barrels for Tikka T3 actions will be headspaced with a barrel nut, just like a Savage.
Click image for full-screen version
Criterion’s Tikka T3 pre-fit barrels can be purchased through Solid Accuracy, a respected Texas-based outfit that sells high-end scopes, stocks, barrels and other rifle components. Solid Accuracy states: “Each Solid Accuracy/Criterion pre-fit barrel features a hand-lapped bore and meets extreme quality control standards. Utilizing a proven barrel nut design, these barrels can be swapped in just a few minutes using only a barrel nut wrench and the appropriate headspace gauge set. Solid Accuracy offers finished lengths up to 30″ with multiple contour options.” Current price for T3 and T3X Barrels is $495.00 which includes Barrel Blank, Barrel Nut and Wrench, and Barrel Threading with Thread Protector for the muzzle.
These Tikka pre-fits were first introduced in 2017, and the accuracy results were impressive. Solid Accuracy’s initial test rifle featured a Tikka T3 action mounted in a KRG X-Ray chassis, with Criterion barrel chambered in 6.5 Creedmoor. The group below was shot with a stout load of H4350 and Sierra 140 grain MatchKings seated .009″ in the lands.
Criterion is proud of how well the Tikka pre-fit project turned out. These barrels work great in the Tikka platform. One of Criterion’s staffers was so impressed with the initial test results that he is built his own Tikka T3 rifle, with a Criterion pre-fit of course…
The CMP’s 2024 National Rimfire Sporter Match took place yesterday, July 13th, 2024 on the Viale Range at Camp Perry. Hundreds of participants took part in this major summer rimfire competition. Click HERE for 2024 Match Photos. One of the most popular events at Camp Perry, the Rimfire Sporter Match attracts hundreds of shooters from 8 to 80 years, novices as well as experienced competitors. It is a great event for shooters who want to have fun without spending a small fortune on rifle, optics, gear and ammo. Along with the major annual Camp Perry event, other Rimfire Sporter matches are held throughout the country in connection with the CMP’s Travel Games.
The CMP Rimfire Sporter discipline is for .22 LR smallbore (rimfire) rifles that weigh 7 1/2 pounds or less. Firing is done at 25 and 50 yards in prone, sitting, and standing positions, in slow and rapid-fire modes. Even with the vast number of competitors, the Rimfire Sport match proceeds efficiently. The CMP now has a special smart-phone App that helps speed up scoring. SEE 2024 Results.
Each summer, the major National Rimfire Sporter Match attracts hundreds of shooters to the shore of Lake Erie at Camp Perry. This year’s Rimfire Sporter Match at Camp Perry was held on Saturday, July 13, 2024. The CMP National Rimfire Sporter Rifle Match offers shooters a recreation-oriented competition where they use affordable, smallbore sporter rifles with either scopes or iron sights. All you need are a .22 LR rifle, sling, and ammo. Competitors will need a total of 60 rounds to fire the Rimfire Sporter Match plus any sighters or range alibis.
Three Classes for Rimfire Sporter
Rimfire Sporter competitors can fire in three different rifle classes. The O-Class rifles must have open sights. T-Class rifles have 6-power max scopes or receiver sights. The third class is TU Rimfire Class (Tactical and Unlimited). Competitors may enter in Single or Double Entry options and then select the rifle class(es) in which they will fire. Firing is done at 25 and 50 yards in prone, sitting and standing positions, in slow and rapid-fire modes. For each Class, awards are offered to High Juniors, High Seniors, and High Women as well as Overall Winners.
Rifles used during the competition may be manually operated or semi-automatic, shot hand-held with sling allowed. Competitors will complete slow fire prone, rapid fire prone, slow fire sitting or kneeling, rapid fire sitting or kneeling, slow fire standing and rapid fire standing shot sequences. Firing is done at 25 and 50 yards on a target with a 1.78″ ten-ring. The target is simple enough for a beginner to hit, yet challenging enough. See explanation of course of fire below. Competitors must supply their own quality ammunition for this match. For more info about the Rimfire Sporter Match, CLICK HERE.
The CMP Rimfire Sporter Rifle Match is an inexpensive, fun-oriented competition using .22 caliber sporter rifles (plinking and small game rifles). To compete, all you need is a basic rifle, safety gear, and ammunition. No fancy, high-dollar rifles are required. Many junior and senior clubs make the National Rimfire Sporter Match an annual tradition — bringing together marksmen of all ages. SEE 2024 CMP Games Rules PDF.
If there is a single CMP event at Camp Perry every summer that offers the highest level of shooter satisfaction, the most diverse group of competitors, and the lowest cost of entry, that would have to be the annual Rimfire Sporter Match. Shooters run a huge range of ages from young juniors to seniors in their 70s and 80s. And persons with disabilities can compete as well, with Adaptive Shooting Programs for physically-challenged competitors.
Each year, the Rimfire Sporter Match attracts hundreds of shooters to the shore of Lake Erie at Camp Perry. The CMP National Rimfire Sporter Rifle Match offers shooters a recreation-oriented competition where they use affordable, smallbore sporter rifles with either scopes or iron sights. All you need are a .22 LR rifle, sling, and ammo.
Rifles may be manually operated or semi-automatic, in three classes: the standard “O Class” for open-sighted rifles, “T-Class” for telescope-sighted rifles, and the “TU Class” for Tactical and unlimited rifles.
Rimfire Sporter Course of Fire
Competitors will complete slow fire prone, rapid fire prone, slow fire sitting or kneeling, rapid fire sitting or kneeling, slow fire standing, and rapid fire standing shot sequences. To learn more about the National Rimfire Sporter Match, CLICK HERE.
Rimfire Sporter Match Basics
The CMP Rimfire Sporter Rifle Match is an inexpensive, fun-oriented competition using .22 caliber sporter rifles (plinking and small game rifles) commonly owned by most gun enthusiasts. To compete, all you need is a basic rifle, safety gear, and ammunition. No fancy, high-dollar rifles are required.
The event is shot with standard sporter-type, rimfire rifles weighing no more than 7 ½ lbs, with sights and sling. Rifles may be manually-operated or semi-automatic. Shooters with manually-operated actions are given extra time in the rapid-fire stage to compensate for the difference.
There are three classes of competition — the standard “O Class” for open-sighted rifles, “T-Class” for telescope-sighted and rear aperture-sighted rifles and “Tactical Rimfire” class, which is a .22 caliber A4 or AR15 style rifle. Firing for all classes is done at 25 and 50 yards on a target with a 1.78″ ten-ring and an 18″ outer one-ring. Even new shooters can get hits on this target, but it’s still tough enough that a perfect 600×600 score has only been accomplished once as far as we know (Go to 2024 Results).
The Civilian Marksmanship Program (CMP) has a CMP Guide to Rimfire Sporter Shooting. This FREE, 48-page digital publication covers equipment, positions, course of fire, rules, scoring and much more. You’ll find helpful “how-to” sections on aiming, sight picture, hold control, and trigger control. Reading these instructional sections can benefit any prone or three-position competitive shooter.
Ever wanted to see how Nosler bullets and cartridges are made? Here’s your opportunity. The Rocky Mountain Elk Foundation (RMEF) has produced a video (“Quality First”) that offers a behind-the-scenes look inside Nosler’s Oregon factory that produces bullets, brass, and ammunition.
Video Showcases Nosler Production Facility and Ballistics Lab
RMEF representatives were provided with unprecedented access into Nosler’s famously-guarded manufacturing plant to show the technology used by Nosler to produce bullets and ammunition. The “Quality First” video showcases Nosler’s complex production processes that include technologically advanced machinery, and stringent quality control measures.
After the intro, this video illustrates Nosler’s bullet construction techniques with an excellent animation sequence. The video then showcases the Nosler ballistics lab, inspection room, and packaging line. The video shows the bullet construction techniques followed by a ‘walk-though’ in the factory, showing the machinery used to make bullets, brass, and ammunition.
Information Resources — Load Data and Nosler Blog
The Nosler website also features comprehensive LOAD DATA, plus informative content in the Nosler Blog. The Load Data page works well on smartphones. Go to the Load Data Index Page, then simply scroll down to a caliber. Then select your cartridge type and bullet weight(s). The rifle listings are quite comprehensive, covering .17 caliber up to .458 caliber. Here is an example of Nosler load data for the 6mm Creedmoor with popular 105-107gr bullets.
Precision Benchrest and F-Class shooters favor premium brass from Lapua, Norma, Peterson, or RWS. (Lake City also makes quality brass in military calibers.) Premium brass delivers better accuracy, more consistent velocities, and longer life. Shooters understand the importance of good brass, but many of us have no idea how cartridge cases are actually made. Here’s how it’s done.
The process starts with a brass disk stamped from strips of metal. Then, through a series of stages, the brass is extruded or drawn into a cylindrical shape. In the extrusion process the brass is squeezed through a die under tremendous pressure. This is repeated two or three times typically. In the more traditional “draw” process, the case is progressively stretched longer, in 3 to 5 stages, using a series of high-pressure rams forcing the brass into a form die. While extrusion may be more common today, RWS, which makes some of the most uniform brass in the world, still uses the draw process: “It starts with cup drawing after the bands have been punched out. RWS cases are drawn in three ‘stages’ and after each draw they are annealed, pickled, rinsed and subjected to further quality improvement measures. This achieves specific hardening of the brass cases and increases their resistance to extraordinary stresses.” FYI, Lapua also uses a traditional draw process to manufacture most of its cartridge brass (although Lapua employs some proprietary steps that are different from RWS’s methods).
After the cases are extruded or drawn to max length, the cases are trimmed and the neck/shoulder are formed. Then the extractor groove (on rimless cases) is formed or machined, and the primer pocket is created in the base. One way to form the primer pocket is to use a hardened steel plug called a “bunter”. In the photos below you see the stages for forming a 20mm cannon case (courtesy OldAmmo.com), along with bunters used for Lake City rifle brass. This illustrates the draw process (as opposed to extrusion). The process of draw-forming rifle brass is that same as for this 20mm shell, just on a smaller scale.
River Valley Ordnance explains: “When a case is being made, it is drawn to its final draw length, with the diameter being slightly smaller than needed. At this point in its life, the head of the draw is slightly rounded, and there are no provisions for a primer. So the final drawn cases are trimmed to length, then run into the head bunter. A punch, ground to the intended contours for the inside of the case, pushes the draw into a cylindrical die and holds it in place while another punch rams into the case from the other end, mashing the bottom flat. That secondary ram holds the headstamp bunter punch.
This video employs DEFORM-2D software to show the draw process for brass casings.
The headstamp bunter punch has a protrusion on the end to make the primer pocket, and has raised lettering around the face to form the headstamp writing. This is, of course, all a mirror image of the finished case head. Small cases, such as 5.56×45, can be headed with a single strike. Larger cases, like 7.62×51 and 50 BMG, need to be struck once to form a dent for the primer pocket, then a second strike to finish the pocket, flatten the head, and imprint the writing. This second strike works the brass to harden it so it will support the pressure of firing.”
Thanks to Guy Hildebrand, of the Cartridge Collectors’ Exchange, OldAmmo.com, for providing this 20mm Draw Set photo. Bunter photo from River Valley Ordnance.
To help serve America’s many millions of new gun owners, Winchester has created a good online information site for first-time ammunition and firearms buyers as well as those just getting started in the shooting sports. Winchester’s New Shooters Site has many helpful articles plus a series of videos.
What type of handguns, holsters, and gear do female shooters prefer? That question was answered by a survey of lady shooters at SHINE 2024, the Annual Conference of the “A Girl & A Gun” organization. The SHINE 2024 event took place this past May at the Cameo Shooting and Education Complex near Grand Junction, Colorado. The 706 lady attendees ranged in age from 17 to 78 and hailed from 45 different states. The 700+ lady shooters included both novices and seasoned shooters — 28% of the attendees were relatively new shooters, 41% were intermediates, and 31% were advanced. The annual event sold out last September and had more than 500 women on the waiting list.
All the participants were required to go through a ‘Gear Check’ process where their handguns, belts, holsters, and mag pouches were all reviewed and function checked. In total, the 706 women brought 976 handguns for training. For today’s article, we reveal the favored handguns, holsters, sights/optics, and other accessories. Glock was the #1 gun choice with 22.75% with Walther a close second at 20.29%. CLICK HERE for complete gun/product survey results.
Handgun Choices by Lady Shooters
Leading Pistol Brands
GLOCK / 22.75%
SIG Sauer / 20.29%
Walther / 17.01%
Smith & Wesson / 9.63%
Heckler & Koch / 5.94%
CZ / 5.33%
Springfield / 4.51%
Canik / 4.41%
Staccato / 3.48%
Ruger / 0.82%
Beretta / 0.61%
Shadow Systems / 0.61%
Kimber / 0.51%
STI / 0.51%
Wilson Combat / 0.51%
Taurus / 0.41%
FN / 0.31%
Favorite Pistol Models
Walther PDP-F / 17.23%
GLOCK 19 / 11.56%
Sig Sauer P365XL / 5.44%
GLOCK 34 / 4.54%
GLOCK 43X / 4.31%
HK VP9 / 4.31%
Sig Sauer P320 / 4.31%
Sig Sauer P365 / 3.85%
GLOCK 17 / 3.40%
Walther PDP / 3.40%
GLOCK 48 / 2.49%
GLOCK 45 / 2.27%
Smith & Wesson M&P Shield EZ / 2.27%
Smith & Wesson M&P 2.0 / 1.81%
Shooting Gear and Accessories Choices
Holster Brands
Comp Tac / 17.16%
Haven Defense / 7.59%
BladeTech / 6.27%
We The People / 5.83%
Black Scorpion / 5.72%
Safariland / 4.40%
PHLster / 3.52%
Dara / 3.19%
Alien Gear / 2.42%
Blackhawk / 1.98%
Hearing Protection
Walker / 36.09%
Howard Leight / 13.00%
Axil / 11.62%
AKT1 Sport / 5.96%
Peltor / 4.28%
Iron Sights Vs. Pistol-Mounted Optics
While there are more pistol-mounted optics each year, they still have not yet surpassed iron sights among women. 54.4% of the ladies’ pistols had iron sights compared to 45.6% of the handguns which were fitted with Red Dot-type slide-mounted optics.
Training Sessions at AG & AG SHINE Conference
During this shine event, training sessions were run at the Cameo Shooting and Education Complex. With 28 live-fire bays, 25 field classrooms, a 5-Stand course, and 2,003-yard rifle range, 3D archery loops, and natural terrain for other training options, AG & AG was able to provide training classes on a wide variety of shooting and self-defense topics.
The 2024 F-Class National Championships is just one month away. The event will be held in Lodi, Wisconsin from August 10th through the 17th, 2024 at the Winnequah Gun Club. The Mid-Range Championships run August 10-13, while the Long Range Championships run August 14-17.
We know many of our readers will be attending the F-Class National Championships, and a good percentage of them will be flying in from around the country. For these F-Class competitors, and other readers who will be flying with firearms this summer, we provide this article with practical tips for transporting your rifles.
Traveling with Firearms — Important Advice
Savage Arms offers a series of Shooting Tips in the Savage Blog. Here is a helpful article from Team Savage Shooter Stan Pate. This covers how to ship your rifle safely, and then re-establish zero properly when the gun is reassembled after transport.
Traveling with firearms can be stressful. You must comply with multiple regulations and then trust your expensive guns to airline baggage handlers. And after arrival you’ll need to put your rifles back together and confirm the zeros. This article offers helpful travel advice from Team Savage shooter Stan Pate. Pate has traveled the globe competing with match rifles. Here he shares his tips for making trips easier on you and your firearms.
Easier Air Travel With Firearms
TSA isn’t nearly as careful with your rifles as you are. Proper storage before sending your firearm up a conveyer belt and into the belly of a plane is critical. Stan Pate spends lots of time each year traveling the skies and has devised a system for keeping his rifle safe when going to and from.
“Never travel with your firearm completely assembled,” Pate cautions. “A fully assembled firearm is much heavier [as a total unit] than one that has been broken-down and stored [in separate sections]. More weight creates more in-the-case movement, which can result in damage. I learned this the hard way years ago. My rifle was actually broken in half when traveling to an international competition. Record your torque settings, use those settings during reassembly and your return to zero should be no problem.”
“Be sure to check on current TSA rules and regulations before travel to be aware of any changes that may effect how you pack your rifles,” says Pate.
Rifle Reassembly and Resetting Zero
The quicker you can reestablish your zero, the quicker you can relax and stop worrying about if your rounds are going to hit their mark during competition. Pate, over the years, has developed a system for rifle reassembly and getting back to zero as quickly as possible. While his torque settings may not be the same as yours, the process can still be used.
“The barreled-action goes back on the stock, and then I tighten all three receiver screws finger tight,” says Pate. “Next, I tighten the front two receiver screws down to 35-inch pounds. The rear receiver screws on this particular rifle likes 15-inch pounds. [Note: Proper torque settings will vary with your action and stock type. Most actions have TWO screws, not three.] Scope attachment comes next, and I follow manufacturer settings when tightening it down. All that’s left to do now is go zero your rifle.”
This video explains an efficient method to Re-Zero your rifles
Little Missouri National Grassland
Precision Benchrest and F-Class shooters favor premium brass from 
The headstamp bunter punch has a protrusion on the end to make the primer pocket, and has raised lettering around the face to form the headstamp writing. This is, of course, all a mirror image of the finished case head. Small cases, such as 5.56×45, can be headed with a single strike. Larger cases, like 7.62×51 and 50 BMG, need to be struck once to form a dent for the primer pocket, then a second strike to finish the pocket, flatten the head, and imprint the writing. This second strike works the brass to harden it so it will support the pressure of firing.”
