Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









September 7th, 2008

Election Watch: Obama's Position on Gun Regulation

As we approach the fall Presidential election, it is important that all gun owners understand the differences between the Democratic Party and Republican Party when it comes to gun regulation. The choice of Vice Presidential candidates speaks volumes about the difference between the parties: Palin is staunchly pro-gun, while Biden is aggressively anti-gun. Alaska Governor Sarah Palin is a long-time NRA member whose family has relied on hunting to “put meat on the table.” By contrast, Delaware Senator Joe Biden has authored major gun ban legislation, and Biden carries an “F” rating on gun issues from the NRA.

How about Barrack Obama — what is his stance on gun rights? In an effort to mollify moderate “swing” voters, Obama hasn’t been talking about gun control much lately. But the fact remains that he is no friend to gun owners. He supports new bans on self-loading rifles, and in 2000 he co-sponsored legislation limiting handgun purchases. To learn more, you should watch the following video. Keep in mind it is a one-sided “advocacy” piece created by the Republican National Committee. Nonetheless, the facts speak for themselves.

YouTube Preview Image
Permalink - Videos, News Post comment »
September 6th, 2008

Spirit of America Match Sept. 7-14 in Raton, NM

The Spirit of America (SOA) National Fullbore Rifle Prone Championship kicks off Sunday, Sept. 7th at Raton, NM, at the Whittington Center Range. The event will run for a full week, concluding with the 3rd U.S. F-Class International Team Challenge Match on Sept. 14th. Members of the Open F-Class teams for the USA and other nations will participate, using this event as a tune-up for the 2009 World Championships in Bisley, England. Open Class Team USA members will all be shooting rifles chambered as 6.5-284s. Overall weight is 22 lbs. for the Open Class rifles, including scope. Shown below is U.S. Team member David Bailey’s rifle, which features a Robertson Composites F-Class stock, with a BAT Action.

The match is sponsored and hosted by the Bald Eagles Rifle Club. A complete 9-page guide to the event is available online. This includes general info, basic match rules, fee schedule, a registration form and match calendar.

CLICK HERE to download SOA Info Form (.pdf file).

Day by day, the scheduled matches include:

Sept. 7 (Sunday): Cunico Tire Service Team Match
Sept. 8 (Monday): Folsom Shooting Club Team Match
Sept. 9 (Tuesday): OK Weber Individual Match — 300, 500, 600 and 900 yards
Sept. 10 (Wednesday): Precision Shooting Individual Match — 300, 500, 600 and 1000 yards
Sept. 11 (Thursday): Sierra Bullets Team Match + McGee Rifle Stocks Match
Sept. 12 (Friday): Sinclair International Individual Match — 300, 500, 600 and 900 yards
Sept. 13 (Saturday): Sierra Bullets Individual Match — 300, 500, 600 and 1000 yards
Sept. 14 (Sunday): F-Class International Team Challenge Match For F-Open Teams

Permalink Competition Post comment »
September 6th, 2008

Lock Up Those Handguns, Please…

For self-defense in your home or shop, you want quick access to your handgun.

Ideally, both handguns and long guns should be locked up in a heavy, full-size gunsafe that is bolted to the floor. However, if you need quick access to a handgun for personal defense in the home, there are smaller safes that can be opened in a couple of seconds, while still keeping handguns secure from kids or any unwanted visitors.

Gunvault Biometric Safe

Shown above is a GunVault Biometric handgun safe ($299.99 at Cabelas.com). This uses your fingerprint as the “key” to open the safe. Place your index finger in the scanner then press the middle button, and the safe opens up in under 2 seconds. As a back-up, you can can quickly open the safe by pressing buttons on the 4-finger keypad in the right sequence. Gunvault also makes a less costly basic GunVault version without the fingerprint function. The basic GunVault employs the keypad and/or a security lock to open the safe. Both models (biometric and standard) can be secured via a heavy security cable so a thief can’t simply grab the safe and run. Cabela’s has a video showing the biometric Gunvault in action.

CLICK HERE to watch VIDEO of BIOMETRIC SAFE

Permalink - Videos, News 5 Comments »
September 5th, 2008

Portable Front Rest for F-Class Shooters

The F-Class Nationals are coming up soon. The Fifth Annual F-Class Championship will be hosted Sept. 30 – Oct. 4 in Lodi, Wisconsin (Winnequah Gun Club). Over 140 shooters are expected to attend. The Course of Fire at the F-Class Nationals requires shooting at multiple distances. That means you’ve got to carry your rifle and rest back and forth to various shooting positions. With rifles that top 20 pounds, it’s no fun to haul a super-heavy front rest around. Butch Lambert has come up with a solution — a special light-weight front rest.

Winnequah Gun Club

Lambert Crafts Light-weight Front Rest
At the request of Larry Bartholome, current member and former captain of the U.S. F-Class team, Butch Lambert of Shadetree Engineering & Accuracy (S.E.A.), has designed and fabricated a lightweight yet stable front rest prototype. Larry wanted a unit that was less burdensome to haul between firing lines than the typical cast-iron or “heavy metal” front pedestal. (That’s Larry with his spectacular “Captain America” Shehane red, white, and blue MBR Tracker stock.)

Larry Batholome F-Class Shehane Tracker MBR

Other than the steel center hub, the rest is built from aircraft-grade 6061 T-6 aluminum, which can be TIG-welded and hard-anodized. To keep weight down, the three horizontal legs are hollow tubes with flutes or slots milled top and bottom. Butch sent us these photos of the new rest, noting: “It weighs 2.25 lbs without the top. I set one of our unfinished rest tops on it. I moved the back leg to the front to get it out of the way. Larry is ‘wrong handed’, so I made it left-handed. I hope to get it TIG-welded together next week and plated. It is definitely easy to lug around, but I prefer something heavier for benchrest shooting. For F-Class, under a 22-lb rifle, Larry believes it should work well.”

Lambert ShadeTree Engineering F-Class rest

Lambert ShadeTree Engineering F-Class rest

Permalink Gear Review Post comment »
September 5th, 2008

Beretta Pledges $1 Million to Support Gun Rights

The Beretta Group of companies, led by Beretta U.S.A., Benelli U.S.A., and Burris Optics, have pledged to give the NRA $1 million over the next five years. This gift will benefit the NRA Institute for Legislative Action and the NRA Civil Rights Defense Fund.

Beretta firearmsThe announcement was made by Cav. Ugo Gussalli Beretta at an event at his home in Clinton, Maryland, on August 20. At this event, Cav. Beretta was inducted into the NRA’s Golden Ring of Freedom, the highest level of the Association’s comprehensive donor recognition society. This new pledge brings the Beretta Group’s gift commitments to the NRA to over $2 million. Previous gifts have benefited the NRA Institute for Legislative Action, NRA Youth Programs, Hunting and Wildlife Conservation, and the National Firearms Museum.

The NRA Institute for Legislative Action mobilizes millions of volunteers nationwide on behalf of candidates who support our Second Amendment freedom, and has been very effective in recent elections both on the state and national level. The Civil Rights Defense Fund, the NRA’s sister 501(c)3 organization, supports litigation involving significant legal issues relating to the right to keep and bear arms.

Beretta firearms

Beretta U.S.A. is part of the Beretta Holding Group. Controlled by the Beretta family, the group includes arms-makers Beretta, Benelli, Franchi and Uberti (Italy), and Sako and Tikka (Finland). The oldest among these companies, Fabbrica d’Armi Pietro Beretta S.p.A., has been operated by 15 generations of the Beretta family, starting in 1526. Cav. Ugo Gussalli Beretta and his sons, Pietro and Franco, run the company today.

Permalink News Post comment »
September 4th, 2008

Ocock busts NBRSA Rail-Gun Records — 0.1129 200-yard Agg

Arizona gunsmith Gary Ocock ranks fourth overall on the all-time Benchrest Hall of Fame Points list. This Monday he added two potential NBRSA Unlimited (Rail Gun) records to his list of achievements. Shooting in a special Monday Labor Day match at Visalia, California, Ocock demolished the existing Unlimited 200-yard NBRSA record. Gary’s 5-target, 200-yard aggregate was 0.1129. (That’s the measured average of five, 5-shot targets, divided by two). Once certified, this will be a new NBRSA record. The previous 200-yard record was a 0.1396 shot in 2003 by Bart Sauter. Gary’s 100-yard Agg was also in the “teens”, a 0.1534. So, Ocock’s combined 100 + 200 “Grand Agg” was a stunning 0.1331, which would also be a new record, beating Bill Forrester’s 0.1496 Grand Agg shot in 1989.

Record-Setting Railgun with Delrin Barrel Sleeve
Gary Ocock was using a Jay Young Railgun with some custom “enhancements” by Gary. As with most railguns, the barrel is held by a barrel block. But Gary employs something pretty unique. Between the metal halves of the 7″-long barrel block, Gary has fitted a Delrin sleeve around the barrel. This is then clamped in place when the block is bolted together. What’s the advantage of the Delrin sleeve? According to Gary “The Delrin seems to help with accuracy. I had a couple barrels that just didn’t seem to shoot well no matter what load I tried. I first tried a sleeve made from lead and epoxy in an effort to make those barrels competitive. The barrels did shoot better, but the epoxy/lead sleeve was a pain to make. So, I came up with the Delrin sleeve and it works just as well or better. I can’t tell you exactly why it works, but it probably is damping the barrel vibration. With the Delrin sleeve I’ve turned average barrels into winners.”

Jay Young Railgun

At right is a Jay Young Railgun, similar to the Unlimited gun used by Gary Ocock to set two new records. Gary’s gun has a longer barrel (26″) and Gary has devised a special Delrin sleeve that fits between barrel and barrel block. Gary believes the Delrin Sleeve dampens barrel vibration. For more info, email Gary Ocock: onehole149 [at] aol.com

Bullets Seated OFF the Lands
For his record-breaking effort on Monday, Gary used a 26″-long, 1.350″-diameter straight-contour 6mm Krieger barrel. Twist is 1:13.5″, and the chambering was a tight-neck 6PPC using Gary’s own 67gr BT match bullets. Gary shot a relatively “mild load” and interestingly his bullets were NOT engaging the barrel rifling. That’s right, he figures his seating depth was about .005-.010″ OFF the lands. The action was a BAT SV with a non-ejector bolt borrowed from another BAT. Scope was a March 50X.

Smart Wind Calls Helped Gary at 200
Watching the wind was key to his amazing 200-yard performance, Gary said: “Mirage was quite heavy, but I noticed things worked best in a light left to right condition. I tried to wait for that condition on most of my shots at 200 yards. On three of the five groups I didn’t hold off at all. On two groups I held off a little. The key was waiting to shoot in that left to right condition.”

Permalink News Post comment »
September 4th, 2008

Beretta-Owned Burris Acquires Steiner-Optik GmbH

Here’s another outdoor industry business consolidation, another big fish swallowing little fish. Beretta Holdings, through its Burris division, has acquired Germany’s Steiner-Optik GmbH. Steiner, a respected maker of optics, particularly binoculars, is based in Bayreuth, Germany, and now employs 120 workers. Steiner will be integrated into the Beretta Group through its optics subsidiary, Burris, based in Colorado. So now the Germans will be making binoculars for a US-based company owned by Italians.

Steiner BinocularsWhy did this acquisition take place? Steiner has not been very successful in the North American market. Steiner’s President and CEO, Carl Steiner, needed the help of an international group with strong distribution and plenty of marketing clout. Beretta Holdings doubtless believes that the addition of Steiner, a “prestige” optics name for over 50 years, will help Burris compete against high-end brands such as Leica and Swarovski. This is a good thing for Burris. Steiner has a record of innovation: Steiner produced the first pocket-sized binoculars, the first commercial binoculars with rubber armor, and the first binoculars with an anti-UV protective lens coating.

Burris General Manager, Steve Bennetts, said both Burris and Steiner have strong brand identification, and he suggested that the two companies will soon coordinate their product development efforts. We suspect this means the high-end optics will carry the Steiner name while mid- and low-cost optics will be sold as Burris products.

Beretta’s companies offer a vast range of products, with optic devices representing an increasingly important component. Current companies owned by Beretta Holdings include: Beretta, Benelli, Burris, Franchi, Meccanica Del Sarca, Sako, Stoeger, Tikka, Uberti Replicas.

Permalink News, Optics 1 Comment »
September 3rd, 2008

Rifle Raffle to Support U.S. F-Class Open Team

Here’s your chance to own a gorgeous, .308-caliber Palma Rifle, while helping the U.S. F-Class Open Team. This handsome rifle, valued at over $3000.00, will be raffled off as a Team fund-raiser. This gun was owned by F-Class Team Vice-Captain Shiraz Balolia and very lightly used. A brand new Bartlein barrel was installed by Jim Cloward before the gun was donated by Grizzly Industrial to help raise money for the U.S. F-Class Open Rifle Team. Funds will help cover the costs of sending the Team to the 2009 World Championships in Bisley, England.

CLICK HERE for MORE Rifle PHOTOS.

Donate $10.00 and get two tickets to win. The more you donate, the better your chances for winning this rifle. A maximum of 2000 tickets will be distributed. Tickets are available from many F-Class Open Shooters around the country, or you may write a check for your desired donation and send it to:

U.S. F-Class Open Rifle Team
P.O. Box 3110
Bellingham, WA 98227

Make checks out to U.S. F-Class Open Rifle Team. If you are making a donation of over $20.00 and would like a receipt for tax deduction, please make out your check to PALMA Promotions and mail to the above address. All tickets and receipts will be sent by return mail. Drawing will be held in February, 2009 in Bellingham, WA.

Permalink News Post comment »
September 3rd, 2008

National Hunting & Fishing Day, Sept. 27

Special events are being planned across the country for National Hunting and Fishing Day (NHF Day), set for September 27th. The annual celebration will serve as a reminder to all Americans that conservation succeeds only because of leadership and funding from hunters, shooters and anglers. National, regional, state and local organizations will run thousands of “open house” hunting- and fishing-related events everywhere from shooting ranges to suburban frog ponds. An estimated four million Americans will participate. For information on NHF Day, visit www.nhfday.org. To find an event in your area, click the link below.

CLICK HERE for a State-by-State list of Hunting & Fishing Day Events

National Hunt Fish Day

History of National Hunting and Fishing Day
In 1972, Congress unanimously passed legislation authorizing National Hunting and Fishing Day on the fourth Saturday of every September. President Nixon signed the first proclamation of National Hunting and Fishing Day, writing, “I urge all citizens to join with outdoor sportsmen in the wise use of our natural resources and in insuring their proper management for the benefit of future generations.” Currently, the national celebration is coordinated by the official home of National Hunting and Fishing Day, Wonders of Wildlife museum in Springfield, Missouri. Sponsors for 2008 include NSSF, Bass Pro Shops, The Sportsman Channel, National Wild Turkey Federation, Realtree, Cabela’s, Woolrich, GunBroker.com, Outdoor Channel, Safari Club International, Hunting Heritage Trust, Smith & Wesson, Field & Stream and Outdoor Life.

Permalink Hunting/Varminting, News Post comment »
September 2nd, 2008

Why You Should NOT Tumble Loaded Ammunition

One of our readers asked: “Is it OK to clean live, loaded ammo in a vibratory tumbler?” The basic answer is NO, do NOT tumble live ammo in a vibratory tumbler. There are serious potential safety hazards that can result from tumbling live ammo. Since it is really NOT necessary to tumble loaded ammo, why take the risk?

Tumbling Can Alter Powder Burn Properties
The main reason to avoid tumbling loaded ammo is that tumbling can break down the powder kernels inside the case and/or alter the burn-rate retarding coatings on the outside of the kernels. This can alter the powder’s burning properties, with dangerous consequences. If you vibrate loaded rounds for a long time, you can both grind or shear the kernels and alter the kernels’ external coatings. Read the warnings on a can of powder, it says do not shake (for that reason).

While we are aware that some hand-loaders, particularly pistol shooters, tumble loaded ammo to remove residual lube or just to make their ammo nice and shiny, this is NOT a sensible procedure. RCBS and most ammo-makers specifically warn against tumbling live ammo in a vibratory tumbler. Hodgdon’s official policy is: “Completed ammo should not be tumbled. The powder will degrade and increase in burn speed.” (From Mike Daly, Customer Satisfaction Manager, Hodgdon/IMR.)

Consider this commentary from the Fr. Frog website:

Q. Is tumbling loaded ammunition dangerous?

Answer: “…Extensive tumbling can cause the breakdown of the powder grains. This would have two major effects. First, smaller grains will ignite more quickly than larger grains, and second the deterrent coating on the outside of the grains may be rubbed off and will be absent from any fractured edges which will cause the powder to burn more quickly raising pressures.

Tests run some years ago by a commercial entity did indicate that potentially dangerous changes in powder charge burning characteristics do take place after PROLONGED periods in either a vibratory or a tumbling cleaner.

The key word here is prolonged. Many manufacturers of ammunition do a final cleaning of their product either by tumbling or a vibratory process before boxing it for shipment. In no case is this allowed to exceed more than just a couple of minutes. The intent is not so much to “polish” but to remove any traces of contaminants which might in time leave marks on the finished product. There seems to be a consensus among the ammunition manufacturing engineers that a minute or two of vibratory cleaning has no discernable effect on burning rates, especially for loads that are compressed, or nearly so. However, all have emphasized the need for EXTREME CAUTION not to overdo the process.

They also pointed out that there is a considerable difference in effect on the powder charge depending on whether the process is by ‘tumbling’ or ‘vibrating’. It would appear that tumbling has less effect on the powder than vibrating, though this is mostly a matter of degree. The admonition to use EXTREME CAUTION to insure that the process never exceeds a couple of minutes applies equally to either process.”

Permalink Bullets, Brass, Ammo 10 Comments »