Eurooptic vortex burris nightforce sale




teslong borescope digital camera barrel monitor


As an Amazon Associate, this site earns a commission from Amazon sales.









April 12th, 2007

Hornady 22-Cal 50gr V-Max on Sale

50 grain Hornady V-max varmint bulletLock, Stock, and Barrel has a great deal right now on Hornady 22 Caliber (.224) 50 grain V-Max bullets: $29.00 per box of 250 bullets, item HRN22616. (That works out to just $11.60 per hundred!) These are regular production bullets, not blems or seconds. Offer limited to five 250-ct boxes per customer and stock on hand. With a short boat-tail and polymer tip, the 50gr V-Max is accurate and very explosive on varmints. You’ll find loads for this bullet in our .223 Rem Cartridge Guide. Contributor Graymist’s favorite .223 Rem load is the 50gr V-Max pushed by Hodgdon H4895. He says “this combo has worked great in every .223 he’s shot.”

Permalink Bullets, Brass, Ammo, Hot Deals Post comment »
April 12th, 2007

Star-D Pro Tripods on Ebay

Star-D tripodThe Davidson Star-D tripod is a solid, all-metal rig that is sturdy enough to be used for movie cameras. Star-Ds feature convenient rotary cam (collet) leg height adjustments and all-metal tilt and pan controls that lock solidly. The center post is clamped with a big locking ring that adjusts for tension. The rugged, machined-aluminum Star-D tripods are no longer in production but you can find good “previously-owned” models for sale on eBay. This tripod is ideal for use with a chronograph or spotting scope (for viewing in sitting or standing positions). Right now there are three nice Star-Ds on Ebay, items 170099554007, 230114024777, and 230114022708. If these units sell out, watch for the newer Star-Ds with all-silver heads and cam-locked legs. You can often pick them up for under $25.00. Look for the latest versions, as shown in the picture.

Permalink Gear Review, Hot Deals 1 Comment »
April 11th, 2007

Cool Hats for Hot Days

Summer’s approaching and temperatures are starting to heat up. For all-day sessions at the range, it’s a good idea to wear a hat that shades your ears and neck from the sun. At the 2006 F-Class Nationals, we noticed that many of the top competitors, including winner Eric Bair and runner-up Alan Warner, sported wide-brimmed hats. Alan even wore his hat while shooting.

Alan Warner F-Class

Cabela’s sells excellent brimmed hats that feature 50+ UPF sun protection ratings and moisture-wicking sweatbands. These are similar to boonie hats, but are more comfortable, better ventilated, and have a slightly broader and stiffer brim. The Yellowstone Breezer Hat, our favorite, has a mesh top, and is on sale right now for $19.88, item OG-951124. A DeLuxe Breezer Hat, with fully-vented top, is $29.95.

Cabelas Yellowstone Breezer hat

Cabela’s RiverGuide Series hats, shown below, are also on sale for just $19.88. The San Juan Packable Hat (item OG-951125), available in Sage (green-gray) or Natural tan is soft, well-ventilated, and packable. There is also a canvas version (item OG-951126) with a foam crown insert so it floats–great if you use the hat when boating or fishing. To order any of these summer hats, click this Cabela’s LINK and type in the item number.

Permalink Gear Review, Hot Deals Post comment »
April 11th, 2007

Expedition Cases for Rifle Transport

You need a strong gun case for valuable rifles. One of our forum members recently shipped a costly match rifle via UPS. When it arrived the fancy stock was broken in half. Replacement cost? $961. We’ve also found that the inexpensive plastic cases with foam padding can put a serious side load on your scope turrets or iron sights that can affect the zero. We’ve seen a Redfield Olympic rear sight actually bend from the side pressure in a cheap plastic rifle case. The best systems for gun transport, in our view, are the expedition cases that store rifles vertically, side-by-side. This puts no bending or lateral pressure on the gun or scope/sight mounts. Also, with this “toaster”-style layout you can place the gun case on the ground with the lid open, and the rifle and optics are still shielded from dust and blowing sand.

Cabelas Safari Double Rifle CaseThe very best side-by-side gun cases are built by Ziegel Engineering, (562) 596-9481. Featuring heavy-gauge aluminum with welded corners, Ziegel cases are beautifully made, but expensive. Ziegel’s Double Expedition Box with cam locks retails for $639.95. A similar product is offered by Cabela’s for much less money. The “bullet-proof” Safari case, made from .063″ marine-grade aluminum with welded corners, costs $359.99 for a 2-gun version, and $379.99 for a 3-gun version. Click THIS LINK and type in “226585” for the Cabela’s item number. NOTE: The interior slots, from foam edge to foam edge, are 50.75″ long. That should fit rifles up to a 30″ barrel unless you have an extended buttstock or bloop tube.

Permalink Gear Review Post comment »
April 10th, 2007

6mm 117 grain DTACs–First Look

Superior Shooting Systems has released a new 117 gr DTAC bullet, designed for 1:7.5″ or faster twist barrels. David Tubb advises these 117s require at least .040″ more throat length compared to his 115s. Robert Whitley got some new 117s and he told us they look very impressive: “The 117 gr bullet looks great, but it’s a real Goliath for a 6mm projectile. I checked on how the bullet sits in relation to the throating of various 6mms. I measured them multiple times in three different barrels–two with brand new, unfired chambers. It looks like you need about .050″ – .060″ more freebore than you need with a DTAC 115 to keep the junction of the boat tail and bearing surface in the same place, and about .125″ – .135″ more freebore than you need with a Sierra 107 to keep the junction of the boat tail and bearing surface in the same place. (I have cases with a slit up the neck so I can see where the junction of the bearing surface and boat tail sits in relation to the neck and shoulder of the case.)”

Robert adds: “I will try these in a 6XC (after I throat out one of my barrels a bit) but the bullet looks big for a 6XC case. I am also looking forward to trying these in the 6mm Super X, the 6CM, and the 6mm Remington I have, all of which have a good bit more powder capacity to enable the use of slower powders (H4831SC, H1000, etc.) with such a bullet. If these shoot as well as they look, the 6mms may give a 6.5 x284 some real competition at long range–we’ll see!”

DTAC 117 gr Bullet David Tubb

Left to Right: Boron nitride-coated 117 gr bullet (1.376″) ,
Moly 115gr DTAC (1.290″), Moly 107 Sierra MK (1.225″)

Permalink Bullets, Brass, Ammo, Gunsmithing Post comment »
April 10th, 2007

New 6-24×50 Bushnell with 30mm Tube

The new Bushnell 4200 Elite 6-24x50mm “Tactical” SF has been released. It features a 30mm main tube, 45 MOA of elevation (top to bottom), 12 MOA per turret revolution, and side-focus parallax adjustment. The scope weighs 22 ounces, eye relief is 3″, and the multi-coated lenses feature RainGuard weather-proofing. A number of vendors have the new scope in stock at prices ranging from $530.00 to $580.00. Currently, befitting its “tactical” name, the scope only comes with a MilDot reticle. Ranging is performed at 12X power, indicated by a red dot on the zoom ring.

Bushnell 6-24x50 Tactical side-focus

Mike of CSgunworks.com reports: “The glass is good. The finish is nice and the turrets feel really positive. I like the fact that it ranges at 12x not 10x, and the side parallax is well-marked all the way down to 25 yards. The crosshairs on the Mil-Dot reticle are a little thicker than I would like, but not too bad. Overall, for the price this scope is hard to beat. I like it more than the Burris TAC scopes.” Mike plans to comparison test the new Bushnell vs. other mid-priced tactical scopes–watch this Bulletin for updates. You can purchase the new 30mm Bushnell 6-24×50 SF at Csgunworks.com, SWFA.com, and The Optic Zone.

Permalink Gear Review, Optics Post comment »
April 9th, 2007

Radical Wolf Pup Hunter BR Cartridge

Al Nyhus and Stan Ware have created a radical short-necked “Wolf Pup” wildcat that won a number of matches in 2006. Al and Stan started with a 30BR design and blew the shoulder forward until the case had enough water capacity to satisfy the Hunter Benchrest rules. The Wolf Pup neck is only about .080″. Even with the ultra-short case neck, the Wolf Pup displays uniform neck-tension, long case life, and great accuracy. During testing, groups in the ‘teens were routine with several powders and the case appears to every bit as tuneable as the 30BR. Tuning is simple as “max accuracy and max velocity occur simultaneously”, according to Stan.

30 caliber Wolfpup hunter Benchrest case forming

Left to Right: Lapua 6BR case; 6BR case necked-up to .30 caliber; neck-turned case ready to fire; fire-formed 30 Wolf Pup case; loaded 30 Wolf Pup round.

Al tells us: “This is a radical new case that myself and Stan Ware (SGR Custom Rifles) are trying in IBS and NBRSA Hunter Bench Rest (HBR) competition. The cartridges used in HBR must hold at least 45.0 or 45.5 of water, depending on whether you’re reading the IBS or NBRSA rulebook. The Wolf Pup holds 45.7 grains of H20, so it’s legal under either set of rules. When you look at the ratio between case capacity and bore size it is almost identical to a 6PPC.

Our Wolf Pup cases (.080″-.085″ neck lengths) show similar loaded round runout figures to our other .30 caliber cases with .320″ and .250″ neck lengths. We set the throat to position the base of the bullet well below the neck-shoulder junction. Obviously, the throat is quite a bit longer on this setup than the freebore length that we’ve been running with our more traditional neck lengths…that is, freebore lengths in the .000″ to .035″ range for bullets based on the 1.00″ long jackets and weights in the 118-125 range. We worried about bullet misalignment in that short neck, but jamming the bullets into the lands seems to take care of that–provided the chamber has as little runout as possible, is well-centered to the bore and the cases are sized aggressively enough to allow a bit of ‘wiggle room’ in the chamber.

30 caliber Wolfpup hunter BenchrestWe’re still learning–remember that the concept was not to have a short neck, but the short neck was the consequence of blowing the shoulder forward enough to reach legal case capacity for Hunter Benchrest class rules. But as we got into the project, we decided to take a fresh approach to the neck length issue. Like everyone, we’ve been amazed that this ultra-short neck works so well. The 30 Wolf Pup has been one of the most fun and interesting projects we’ve ever worked with. It delivers great accuracy, easy tuning, and long case life.” (Target shown was a 5-shot group fired 4-8-06 at 100 yards on the Wolf Pup’s first outing.)

Permalink Competition, Gunsmithing 2 Comments »
April 9th, 2007

Free Garmin GPS with Burris Scope

This is a great deal for hunters. For a limited time, if you purchase a Burris Fullfield II 3-9x40mm scope at Midsouth Shooters Supply, you’ll receive a free Garmin eTrex GPS. The popular eTrex has a “street price” of about $90.00. Compact, yet fully featured, the 6-ounce, 4″x2″ eTrex literally fits in the palm of your hand. All five buttons are placed on the sides, for simple, one-handed operation. Midsouth’s package price is just $235.99 (item 023-200162-GPS). That means you are getting a quality, fully-coated “major-brand” hunting scope for under $150.00.

Permalink Hot Deals, Optics Post comment »
April 8th, 2007

It's Easter–Think Family, Think Fun

This website is all about precision rifles, and achieving the Nth degree of accuracy. But sometimes we should remember the simple pleasures that made shooting fun to begin with. Today, on Easter Sunday, it’s worth contemplating rifles that allow all members of the family to have fun, without a lot of expensive gear or costly ammunition.

I spent a few hours yesterday testing big-buck rimfire bench rifles, shooting through a 36-power scope from a thousand-dollar, one-piece rest. Before heading to the range, I spent two full hours sorting my ammo by run-out, OAL, rim thickness, and weight. The whole afternoon, I strained to deal with the scope’s ultra-critical eye-relief and miniscule 1mm exit pupil. While shooting, my partner and I would grumble and groan if we had a single shot leak out of a group at 50 yards. Then we’d second-guess our wind call, or speculate whether Juenke-sorting the ammo might take 0.10″ off the average group size. The standard of accuracy we demanded made this “Saturday at the Range” more work than play. At day’s end, I realized I had a stiff neck, a tension headache, and a lingering sense of dissatisfaction. Then I thought, wait a minute, shooting is supposed to be fun.

What was missing from Saturday’s “all-business” shooting session was a time-out for some stress-releaving fun stuff. Typically when I go to the range I’ll bring a pistol, or a lever gun, or a factory 22 to shoot steel. It’s very rewarding to stand up on your hind legs with a lever gun and “ring steel” at 50 or 100 yards, using iron sights or a low-power scope with forgiving eye relief and a bright image. When I bring my Marlin 39A to the range, invariably a fellow shooter asks to give it a try, or says “mind if my boy tries your 22?” After sending a dozen rounds of inexpensive ammo downrange at steel targets, they’d hand back the rifle with a big grin saying “Now THAT was fun.” Kids especially love shooting a light, well-balanced 22 offhand and getting instant gratification from the “ping” of a well-placed shot.

marlin 39A lever action 22LR

In our obsession with precision, we can forget to involve the family in the shooting game, and fail to allow needed diversity into our shooting. It’s OK for a Hall of Fame BR shooter to stand up and shoot iron sights now and then. We BR-aholics can actually benefit from trying different shooting disciplines. I find that taking a break from the serious bench stuff and shooting from a standing position with iron sights loosens up the body and clears the mind, so when I go back to shooting from the bench, my performance improves.

CZ 452 453 Varmint 22LR

Here are three great plinking rifles that combine low cost with surprising accuracy. The Marlin 39A is a classic, with the heft and feel of a centerfire lever gun. The Micro-groove barrel provides “best in class” accuracy. The CZ 452 Varmint is a versatile sporting gun with a comfortable stock and quality action. With a Brooks trigger upgrade, it’s good enough to win a club-level silhouette match (or you can get a model 453 with factory set trigger). The Izmash “Biathlon” basic offers a fast-cycling Fortner-style toggle action (kids love them), a heavy barrel, and 1.3-lb trigger pull out of the box. Often priced as low as $349.00, this rifle, from Russian American Armory, is hard to beat from a price/performance standpoint. For more info (including accuracy test results), read this Review of Biathlon Basic. Here are some 50-yard targets shot with the Biathlon Basic by Tod at GunTech.com.

biathlon basic Izhmash

Permalink Gear Review, News Post comment »
April 8th, 2007

Elevate that Rear Bag for Prone Work

shooting mat shelf linerMost rear sand-bags (from Edgewood, or Protektor, or SEB) are optimized for use on the bench with low-profile stock designs like the McMillan Edge or Kelbly Klub. If you use these bags when shooting from the ground F-Class style or with bipod, you may find the rifle is too low to the ground for comfort. Yes you can suck in your belly and crank down your front rest, but it makes more sense to elevate the rear bag. Jason Baney has a simple solution that costs under $4.00 in materials.

Get a small 12″x12″ section of 1″ thick plywood and trim it to fit the base of your bag, leaving maybe 1/2″ extra on all sides. Then get some rubberized, waffle-pattern GRIP-IT shelf-liner from your local home improvement center. Alternatively, if you want a more rigid base (with less ‘give’) for hard, flat ground, use high-durometer unlined Neoprene, available from industrial supply shops. Glue a layer of shelf liner or Neoprene on the bottom and top of the plywood. This will give good grip on your shooting mat and provide a stable, non-slip surface for the base of your sandbag. If you need more elevation, just use a thicker piece of wood, or sandwich two pieces together. If you have a heavy recoiling rifle and need a riser with more mass, put a metal plate (same dimensions) between the plywood and the bottom layer of rubber shelf-liner/neoprene. If you want a bag riser without the work of trimming and glueing, Dave Dohrmann sells high-durometer Neoprene riser pads in 1/2″ through 1″ thicknesses, starting at $25. Call Dave at 864-884-0155 or email dbugholes[@]aol.com. With textured surfaces top and bottom, Dave’s heavy pads work equally well to elevate your bag on the bench.

SEB Sebastian Rear Sand Bag

Permalink Tech Tip Post comment »