Vista Outdoor Inc. (NYSE: VSTO) announced that its Board of Directors, following consultation with its financial and legal advisors, has rejected the unsolicited proposal received on November 22, 2023 from Colt CZ Group SE to combine Colt CZ and Vista Outdoor. It appears that the main reason the Colt CZ proposal was rejected is that the proposed $30.00 share price was too low and “did not take into account the value created by splitting the outdoor and sporting divisions” (Reuters). Vista Outdoor will continue to move forward with sale of its sporting products operations to the Czechoslovak Group A.S. (CSG), as announced this past October.
“The Board of Directors has determined that the (Colt CZ proposal) would not be more favorable to Vista stockholders from a financial point of view than the transactions contemplated by the CSG (agreement) and does not provide a basis for engagement with Colt CZ,” Vista Chief Executive Gary McArthur said in a letter posted on the company’s website.
Vista Outdoor will continue to proceed to sell its outdoor sporting products business to Czechoslovak Group (CSG) for $1.91 billion. This will involve transfer of some of the biggest names in the shooting/reloading world including: Federal, CCI, Remington Ammo, Speer, and Hevi-Shot. The sale and take-over is expected to be completed in 2024. CSG stated: “From the outset, we have believed that, compared to Colt’s offer, our agreement with Vista makes much more sense for Vista shareholders and for the future success of both (Vista) segments.”
Vista Outdoor’s Board of Directors stated that the determination to reject the Colt CZ proposal was made based on a number of factors, including:
The “purported value of $30 per Vista share in the November 22 [Colt CZ] Proposal significantly undervalues Vista”;
The November 22 Colt CZ Proposal “does not provide adequate details relating to the debt and equity financing contemplated thereby and does not include any binding commitments with respect to such financing”;
The November 22 Colt CZ Proposal “does not take into account the significant stockholder value that is expected to be created by the separation of the Outdoor Products and Sporting Products segments of Vista into two independent companies, each with its own dedicated strategic focus, enhanced ability to attract and retain top talent, tailored capital allocation philosophy, and set of competitive advantages.”
An official release stated: “The Vista Outdoor Board continues to recommend the acquisition of the Sporting Products business by Czechoslovak Group a.s. (“CSG”) and remains committed to acting in the best interests of Vista Outdoor stockholders.” And CSG has stated: “From the outset, we have believed that, compared to Colt’s offer, our agreement with Vista makes much more sense for Vista shareholders and for the future success of both (Vista) segments.”
The acquisition of the Sporting Products business by Czechoslovak Group is expected to close in calendar year 2024, subject to approval of Vista Outdoor’s stockholders, receipt of necessary regulatory approvals and other customary closing conditions.
The NSSF First Shots program helps ranges get new participants involved in the shooting shorts. First Shots provides free targets, eye and ear protection, rimfire ammo, and other resources. In addition, the NSSF recently announced that it can provide enhanced direct funding. Participating ranges will get $15 for each new shooter, up to $1500 maximum. To qualify, ranges must host at least 3 First Shots events, and provide event reports. More information about First Shots is available at NSSF.org/firstshots.
New Direct Funding for Ranges — up to $1500
NSSF funding for First Shots partners, which was previously limited to marketing co-op efforts, is now available to qualifying NSSF member ranges, instructors, and shooting sports organizations to help cover expenses related to First Shots hosting efforts. Hosts are eligible to receive $15 per First Shots participant, up to a maximum of $1,500.
To enroll as a First Shots host and sign up for the new First Shots incentives program, contact Ann Gamauf at agamauf@nssf.org or Zach Snow at zsnow@nssf.org.
Traditional First Shots Program Support In addition to the new incentives listed above, First Shots host ranges can receive the program’s regular no-cost support materials, including:
— Eye and ear protection
— Rimfire ammunition
— Birchwood Casey Shoot-N-C targets
— Up to $500 annually in monetary support for clay target and shotgun ammunition expenses
— First Shots handbooks and other firearm safety literature for each student
— $25 rewards coupon for each student for completing a survey, cost covered by NSSF, to use at the host range
— Up to $3000 in annual co-op advertising funds to promote your First Shots event offerings
Many guys getting started in long range shooting are confused about what kind of scope they should buy — specifically whether it should have MIL-based clicks or MOA-based clicks. Before you can make that decision, you need to understand the terminology. This article, with a video by Bryan Litz, explains MILS and MOA so you can choose the right type of scope for your intended application.
You probably know that MOA stands for “Minute of Angle” (or more precisely “minute of arc”), but could you define the terms “Milrad” or “MIL”? In a helpful video, Bryan Litz of Applied Ballitics explains MOA and MILs (short for “milliradians”). Bryan defines those terms and explains how they are used. One MOA is an angular measurement (1/60th of one degree) that subtends 1.047″ at 100 yards. One MIL (i.e. one milliradian) subtends 1/10th meter at 100 meters; that means that 0.1 Mil is one centimeter (1 cm) at 100 meters. Is one angular measurement system better than another? Not necessarily… Bryan explains that Mildot scopes may be handy for ranging, but scopes with MOA-based clicks work just fine for precision work at known distances. Also because one MOA is almost exactly one inch at 100 yards, the MOA system is convenient for expressing a rifle’s accuracy. By common parlance, a “half-MOA” rifle can shoot groups that are 1/2-inch (or smaller) at 100 yards.
What is a “Minute” of Angle?
When talking about angular degrees, a “minute” is simply 1/60th. So a “Minute of Angle” is simply 1/60th of one degree of a central angle, measured either up and down (for elevation) or side to side (for windage). At 100 yards, 1 MOA equals 1.047″ on the target. This is often rounded to one inch for simplicity. Say, for example, you click up 1 MOA (four clicks on a 1/4-MOA scope). That is roughly 1 inch at 100 yards, or roughly 4 inches at 400 yards, since the target area measured by an MOA subtension increases with the distance.
MIL vs. MOA for Target Ranging
MIL or MOA — which angular measuring system is better for target ranging (and hold-offs)? In a recent article on his PrecisionRifleBlog.com website, Cal Zant tackles that question. Analyzing the pros and cons of each, Zant concludes that both systems work well, provided you have compatible click values on your scope. Zant does note that a 1/4 MOA division is “slightly more precise” than 1/10th mil, but that’s really not a big deal: “Technically, 1/4 MOA clicks provide a little finer adjustments than 1/10 MIL. This difference is very slight… it only equates to 0.1″ difference in adjustments at 100 yards or 1″ at 1,000 yards[.]” Zant adds that, in practical terms, both 1/4-MOA clicks and 1/10th-MIL clicks work well in the field: “Most shooters agree that 1/4 MOA or 1/10 MIL are both right around that sweet spot.”
The 44th Edition of the Blue Book of Gun Values is now on sale for just $29.98, over 50% off the original price, and $17.02 less than the current $47.00 Amazon price. To get this $29.98 deal, purchase this popular price guide through Blue Book Publications.
The Blue Book of Gun Values by S.P. Fjestad is the leading gun valuation resource. There are now over 1.8 million copies in circulation worldwide. This book continues to be the “Bible” for buyers, sellers, collectors, and connoisseurs in the firearms industry.
Blue Book of Gun Values, 44th Edition, May 2023
The 44th Edition contains 2,528 pages covering over 1,800 manufacturers/trademarks, with over 35,000 gun model descriptions, and over 180,000 values, with new-for-2023 data!
Review by Tom Gresham, Gun Talk Radio Host
“At some point, every gun owner asks the question, ‘What’s it worth?’ The leading reference for decades has been the Blue Book of Gun Values. Whether you are a seller, a buyer, a shopper, or just curious, this constantly-updated gold mine of research is your friend.”
Features of the new Blue Book of Gun Values:
· Includes the new 2023 makes and models, with many new handguns and rifles, and important pricing updates.
· 2,528 pages covering over 1,800 manufacturers and trademarks, with over 35,000 gun model descriptions.
· 180,000+ up-to-date values are provided — most complete resource in print.
· Important pricing updates on major trademark current, antique, and discontinued models, including Colt, Winchester, Smith & Wesson, and Ruger.
· Color Photo Percentage Grading System (PPGS) makes firearms grading even easier and more accurate.
· More information, more values, more illustrations, and more history than any other gun price guide on the market.
Sample Page from Blue Book of Gun Values:
Book tip from EdLongrange. We welcome reader submissions.
The NRL Precision Hunter Challenge features a multi-distance, walk-around shooting course similar in some ways to PRS/NRL, but limitations on weight and cost of equipment make this more affordable and more practical. This relatively new discipline is catching on — the 2023 NRL Hunter Challenge match, held June 16-18, 2023, in Price, Utah, drew nearly 150 competitors. Hornady was the title sponsor of the event.
Shooting USA SHOW TIMES:
The 2023 Hornady NRL Hunter Challenge is featured this week on Shooting USA television. This Shooting USA Episode airs Wednesday, November 29, 2023 at 9:00 PM Eastern and Pacific; 8:00 PM Central. If you miss the regular broadcast, you can stream the show online on Vimeo for $0.99 per episode.
Shooters from all over the country competed in 20 challenging stages. The course of fire consisted of 160 rounds with hiking between stages at the North Springs Shooting Complex. The Precision Hunter Challenge featured target distances from 200-850 yards, and angled shots between 0-10°. At the North Springs Shooting Complex, there were natural terrain obstacles and tree stands. Competitors had to navigate the terrain to establish their shooting positions — very much the opposite of a benchrest match!
“The NRL HUNTER Series is designed to help educate new and seasoned hunters about their skills, gear, and personal limitations. The Hornady Precision Hunter Challenge did just that!” said Travis Ishida, President of the NRL. “With a well-designed course of fire that was both challenging and fun, this match encompassed everything we are looking for. With over 50% new faces at this match the NRL HUNTER Series is growing faster than we ever imagined” he added. Verl Dallin, Match Director, added: “With the help of the staff and ROs, the Hornady Precision Hunter Match turned out simply fantastic”.
This video features highlights from the 2022 Hornady Precision Hunter Challenge:
At the NRA Annual Meetings last year (2022), Colt’s Manufacturing introduced an impressive new rimfire revolver — the King Cobra Target 22 LR. Colt states: “From competition to plinking and small game hunting, this baby Cobra does it all and packs 10-rounds of .22 LR in its cylinder”. The King Cobra Target 22 LR is available with 4.25-inch and 6-inch barrel lengths, both with 1:16″ RH rifling twist. MSRP is $999.00.
The King Cobra Target 22 LR features USA-forged stainless steel construction. Designed and crafted for outstanding accuracy, new King Cobra Target 22 LR features a one-piece barrel/shroud with fiber optic front sight. The cylinder holds ten (10) rounds. The frame is fitted with an adjustable target rear sight and Hogue overmolded rubber grips.
This TFB Showtime episode examines the new .22 LR rimfire Colt King Cobra Target. The King Cobra Target 22 LR features a 10-shot cylinder, and the same adjustable target sights as the .357 Magnum version.
Last May, Justin Baldini, Colt’s VP of Product Strategy stated: “We are very excited to debut this new Baby Snake to our customers[.] Shooting .22 LR is such an important part of shooting sports. It’s where we come to learn as a beginner; and where we return as seasoned shooters to cost-effectively enjoy more time at the range. We’re confident that new and old Colt fans will love what we’ve done with the new King Cobra 22 LR.”
All-American built, the King Cobra Target 22 LR was designed and made to be shot — a lot! It should deliver exceptional accuracy and good reliability. Expect to see these revolvers at formal and informal rimfire competitions at gun clubs around the nation.
Click image to go to vendor site with Colt King Cobra Target 22 LR in stock:
Commentary: We applaud Colt for introducing this new .22 LR wheelgun. Rimfire revolvers are great. This Editor owns a Smith & Wesson Model 617 ten-shot rimfire revolver that has easily fired more rounds than all his other handguns combined. A .22 LR revolver is great for training and fun for plinking. Like the Model 617, this new Colt .22 LR wheelgun offers minimal recoil, great reliability, a nice sight radius, and affordable shooting. In addition, if you shoot single-action slow-fire, the trigger pull is light and crisp — better than the vast majority of semi-auto pistols. We think this new “Baby Snake” will be a great addition to any shooter’s collection.
We have all been there — you place a piece of tumbled brass in the shell-holder of your press, raise it into the die, and suddenly it is like somebody hit the brakes. The case is stuck in the die. Your first instinct is to reverse it out. You crank on the handle, and BANG! The rim rips off the case head and you are looking at a piece of brass stuck in the die.
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
What Causes Stuck Cases
One of the first common mistakes reloaders face is the stuck case. It can be caused by too much or too little lube. Too much and a vacuum can be formed causing the case to become suctioned into the die. Too little lube and friction is the culprit. So what is the cure? There is no exact cure, but the best lube that we have found so far is just a dab of Imperial Sizing Die Wax on your fingers and applied in a thin coat on the body of the case, not the shoulder or neck. Too much of this wax can cause the vacuum effect, or can eventually load your die up with gobs of residue. If it is applied to the shoulder area, or the leftover wax moves up into the shoulder region of the die, you will see dents or dimples in the shoulder. [AccurateShooter.com Editor’s Note: For normal full-length sizing of small cases such as 220 Russian/PPC, 6mmBR, 6.5 Grendel, or 6.5×47 Lapua we recommend Ballistol (aerosol) lube. It is very slippery, goes on very thin, and does not gum up the die.]
A great way to ensure that your dies are clean is to use a simple chamber mop with a dab of your favorite solvent on it and clean out the die. Be sure all of the solvent is out after cleaning by spraying the die out with Quickscrub III or use a clean chamber mop. If you are storing your dies, you can apply a thin coat of a good oil to protect the steel such as TM oil or Starrett M1 Spray.
This video shows how to use an RCBS Stuck Case Removal Kit:
Using a Stuck Case Removal Kit
If you do stick a case in your die there are a few good stuck case removal kits available. Each one works in a similar fashion. I have found the Hornady kit very effective and easy to use. [Editor: Forster, Lyman, and RCBS also make good kits for removing a case stuck in a die.]
Basically what you do is remove the die from the press. Unscrew the decapping assembly and pull it out as far as you can. You then need to drill/tap threads into the stuck case head (this is why it is suggested to unscrew the decapping assembly as far as you can to get it clear of the drill bits). Once this is done screw the die back into the press. You then install the included shellholder attachment on the shellholder ram, and thread it into the case via a small wrench. With some elbow grease you can reverse the stuck case out of the die with the leverage of the press, and not damage the die.
However if the case is stuck… REALLY stuck, you may pull out the threads on the case and you are still left with a stuck case in the die without any way to pull it out. If the case is really difficult to remove even with the use of a stuck case removal kit, do not try to be Hercules with the press ram. Here is a trick that may work. Take the die with the stuck case and place it in your freezer for a couple of hours. Then repeat the removal with the cold die. The freezing temperatures may cause the brass to contract, and make removal easier. If this does not work it is recommended to send it to the die manufacturer. They will be able to remove the case without damaging the die.
Another fix if you can remove the decapping assembly completely is to use a tap hammer and a punch or small wooden dowel to knock the stuck case out. This isn’t the best way since it is very possible that you will damage the die internally or externally on the threads, or both. Send the die to the manufacturer to have this done properly. You will be happier in the long run.
This article appears courtesy Sinclair International. It first appeared in Sinclair’s Reloading Press Blog.
At the request of our readers, we provide select “Deals of the Week”. Every Sunday afternoon or Monday morning we offer our Best Bargain selections. Here are some of the best deals on firearms, hardware, reloading components, optics, and shooting accessories. Be aware that sale prices are subject to change, and once clearance inventory is sold, it’s gone for good. You snooze you lose.
NOTE: All listed products are for sale to persons 18 years of age or older. No products are intended for use by minors.
CYBER MONDAY Special — Hornady L-N-L Classic Press Reloading Kit With FREE Case Prep Duo
On sale now at Midsouth for just $299.99 ($100 off), the Lock-N-Load Classic Press Reloading Kit comes with everything you need for case prep and powder measuring. This kit features an electronic scale, powder trickler, funnel, hand-held priming tool, reloading block, and Hornady Reloading Handbook, 11th Edition. This kit also includes a FREE L-N-L Case Prep Duo, which sells for $55 by itself.
1. Natchez — Big Savings on Burris, Leupold, and Trijicon Scopes
⏺ End of year sale with major brand scopes at huge savings
If you’re in the market for any type of optic from a red dot to a thermal scope (for night hunting) check out the current Natchez Optics Sale. A variety of quality scopes from Burris, Leupold, Trijicon (and more) are offered at very attractive end-of-the-year prices. You can save up to $819 or 69%. In addition, for a limited time, you get FREE Shipping for orders $99.99+ with Code FS231123.
2. Palmetto SA — Taurus G2C 9mm Pistol, $229.99
⏺ With rebate get a good 9mm carry pistol for just $199.99
If you need a good, reliable carry pistol, but have a limited budget, consider the Taurus G2C 9mm pistol, on sale at Palmetto State Armory for just $229.99. The G2C features an accessory rail, adjustable rear sight, textured grip, and smooth edges for comfort. The double-stack magazine holds 12 rounds. NOTE: This G2X pistol qualifies for the $30 Taurus Rebate right now. That lowers your net price to just $199.99 — a steal.
3. Midsouth — Hodgdon and Vihtavuori Powders in Stock
⏺ Ultra-popular Hodgdon and VV powders now available at good prices
Many super-popular Hodgdon and Vihtavuori (“VV”) powders are in stock right now at Midsouth. That’s right, you can order Hodgdon Varget, H4350, and H4831SC right now for $50.99/lb (or $43.62/lb for 8-lb H4350, H4831sc). And other Hodgdon powders are available starting at $36.99/lb. Plus many popular Vihtavuori powders are in stock at Midsouth including VV N133, N150, N310, N550, N560 and more.
4. EuroOptic — Meopta Optika Scope Sale
⏺ Save up to 37% on Meopta Optika riflescopes
Meopta makes excellent scopes with extremely high-quality glass. The larger Meopta scopes offer impressive 6 times zoom range (e.g. 3-18X and 5-30X). If you want a high-end scope at a moderate price, check out the Meopta Optika Sale at EuroOptic. Right now you can save up to 37% on Meopta scopes, including the FFP Optika6 5-30x56mm ED DichroTech, now discounted a whopping $450.00!
5. Graf’s — Mark 7 Autodrive Sale
⏺ Great advanced power accessory for big Dillon Progressives
Do you own a Dillon progressive press and want to load bulk ammo faster and easier? Check out the Mark 7 Autodrive sale at Grafs.com. Designed for Dillon 650/750 or 1050/1100 series presses, these Mark 7 Autodrives power the press cycles. That lets you produce more quality ammo in less time. The efficient Autodrives will reduce hand and muscle fatigue.
6. Amazon — Frankford Arsenal Brass Dryer, $49.99
⏺ Great solution for drying brass after wet-tumbling
If you wet-tumble brass, you must ensure that the brass is dry inside and out before loading. You should never ever put primers and/or powder in damp brass. An excellent, efficient drying solution is the Frankford Arsenal Brass Dryer, now just $49.99 on Amazon. Vented trays provide excellent airflow and the heavy-duty, 500-watt heating unit can dry a full load of brass in under an hour.
7. Amazon — Lock-N-Load Comparator Kit, $34.00
⏺ Good tool works with most popular bullet diameters
For best accuracy and optimal ES/SD, you must seat bullets precisely. With the Hornady Lock-N-Load Comparator Kit you can quickly yet precisely measure seating depth. This kit comes with seven (7) different comparator inserts for bullet diameters: .224, .243, .257, .264, .277, .284 and .308. With the comparator attached to your calipers, this system measures from the bullet ogive to the base of the loaded round with great precision. You can use this tool to confirm various seating depths when doing accuracy testing. For example you can test 0.010″ off the lands and then 0.015″ off the lands.
8. Midsouth — Frankford Arsenal Intellidropper, $159.99
⏺ Great price on modern, fast dispenser with BlueTooth and App
A good electronic powder scale/dispenser lets you load more precisely with greater charge-weight consistency. The Frankford Arsenal Intellidropper delivers 0.10 (one-tenth) of a grain accuracy. This modern, easy-to-use machine also connects via Bluetooth to a very handy App on your phone that stores your loads for various cartridge and bullet types. Priced at just $159.99 at Midsouth, this is a great deal. This same Intellidropper sells for $203.99 elsewhere. The Intellidropper boasts a proprietary powder calibration button and dispenses powder twice as fast as some other powder dispensers.
9. Amazon — Neolube Neck Lube, $22.99
⏺ Very effective liquid lube for inside case-necks
Neolube is a little-known secret of top shooters, who use it to lube the inside of case-necks. That helps smooth bullet seating which, in turn, can help provide a more consistent ES/SD. Easy to apply, Neolube provides a very thin film, so this 2 oz. bottle will last for multiple seasons. Using Neolube during brass prep can help ensure consistent seating.
Heavy recoil can hurt your shoulder and potentially make you miss your shot. Installing a mechanical recoil-reduction system can be expensive but we found these handy KEEPER MG Recoil Pads. Priced at $28.99 for a twin pack, these pads employ a HQ visco-elastic absorption gel that dissipates recoil vibrations and reduces felt recoil. The pads are made from 4-way stretch neoprene to fit snugly.
The Civilian Marksmanship Program (CMP) has approved new divisions for adults and juniors that will be implemented at the 2024 CMP Bianchi Cup and added to the CMP’s Action Pistol Program. The major development is the approval of a new Rimfire Division. That’s a very big deal that makes the Cup competition much more affordable. We applaud this move by the CMP.
Along with the new Rimfire Division, the CMP will add new “Provisional Divisions” for Production and Production Optics. CLICK HERE to learn more about the new Bianchi Cup Rimfire and Provisional Divisions.
The 2024 CMP Bianchi Cup is set for May 21-24, 2024 at the Green Valley Rifle & Pistol Club in Hallsville, Missouri. This prestigious 40-year-old action pistol match includes four featured events: Practical, Barricade, Falling Plate, and Moving Target. Hundreds of competitors from around the world compete in the event each year.
New Competition Classes: Rimfire, Provisional Production and Production Optics
In 2024, Bianchi Cup participation should increase significantly as the CMP is introducing new competition classes. Awards will be presented for all three new divisions: Rimfire, Production, Production Optics. The biggest change is the inclusion of a Rimfire Division. This division will encompass the same basic rules for each of the current setups — Open, Production/Production Optics, Metallic and Revolver.
The Rimfire Division is designed to encourage participation from juniors not shooting centerfire pistols as well as adults who want to warm up for the Bianchi Cup in a less expensive manner.
Provisional Divisions for Production and Production Optics will also be added to action pistol (with current Production and Production Optics divisions remaining unchanged). The rules for the new Provisional Divisions will be derived form USPSA rules.
Competitors will be divided into their divisions — Metallic, Production, Open, Production Optic, Provisional Production, Provisional Production Optic, or .22 Rimfire — per current CMP Action Pistol Rules.
Handguns for Bianchi Cup’s New Rimfire Division
If you’re looking for a reasonably-priced semi-auto .22 LR pistol for the new Rimfire Division, we recommend the Browning Buck Mark series. Buck Marks are accurate and very reliable. This rimfire pistol is available in a variety of models starting at under $370.00. A good Buck Mark will serve you for a lifetime.
For Rimfire Revolver competition we recommend the 10-shot Smith & Wesson 617 and the relatively new 10-shot Colt King Cobra Target .22 LR, both with available 6-inch barrel lengths. CLICK HERE for a good, side-by-side video review of these two rimfire revolvers by popular YouTube host Hickok45.
These German-language video (with English subtitles), showcases Bianchi Cup Revolver Class guns, and explains how to clean and maintain these high-tech wheelguns.
Do you use bushings to size your case-necks? Are you assuming that your bushings are actually round on the inside, with a hole that’s centered-up properly? Well you may be in for an unpleasant surprise, based on what our friend Jim de Kort recently discovered. Jim was concerned about the run-out on his brass. His cases went into his bushing-equipped FL die pretty straight, but came out of the die with up to .004″ run-out. “What gives?”, Jim wondered. “Could the problem be the bushings themselves?”
To answer that question, Jim decided to examine his bushings. Using an Accuracy One Wheel-drive concentricity gauge, Jim checked out some of his neck bushings. What he discovered may surprise you…
Neck Bushing Flaws Revealed
Trust no one… — Jim de Kort
Jim writes: “I measured the concentricity of my 6BR rounds today. I noticed they went into the neck-bushing equipped full-length sizing die with less than .001″ deviation but came out with .003-.004″. The culprit, it appears, was the bushing itself. Without it the cases stayed within .0005″ to .001″ deviation, so something was happening with the bushing.
One bushing had .00025″ deviation on the outside, yet almost .003″ on the inside, so it is crooked. But even when using a bushing that is within .001″ I still get .003″ runout after sizing. I repeated the same procedure for my 6×47 and got the same results. When using the bushing, concentricity suffers a lot.”
Before we bash the bushing-makers, we must acknowledge that many different things can contribute to excessive run-out and/or mis-alignment of case-necks. We don’t have all the answers here, and Jim would be the first to say that some mysteries remain. Still, these are interesting results that give all precision hand-loaders something to think about.
Jim Borden of Borden Accuracy also offers this tip: “Check the trueness of the face of the die cap. That has more to do with trueness than the bushing. Also check perpendicularity of hole in bushing to top surface. When I was making dies, the cap was made by threading and facing the threaded tenon in same setup.”
Editor’s Comment: Many people have great results with neck-bushing dies, but Jim isn’t the only fellow who has seen some very odd results. I personally employ honed, non-bushing dies for many of my chamberings. These non-bushing dies (with the necks honed for .002-.003″ neck tension) produce extremely straight ammo, with run-out consistently under .0015″.
A stuck case is one of the boo-boos that all of us reloaders have faced from time to time. If proper lubrication is applied, then it should not be a problem. No matter if you are a seasoned reloader or new to it, this situation can happen. Take your time, use the proper procedures, and you will be back in business in no time! This article explains how to avoid stuck cases (through proper lubrication) and how to use a stuck case removal system.
